PROVN OF SERVICING RAMP WITH ALLIED WORK AND FIRE SAFETY RELATED WORK AT AIR FORCE STATION AMRITSAR CANTT

Amount

M&L for Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed

M&L for excavation in trenches, n.exc. 1.5m wide and n.exc. 1.5m in depth; for foundations, etc. or shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10sqm on plan and n.exc. 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed

Returnig, filling in, incl spreading, leveling watering and well ramming in layers not exc 25 cm thick above or below ground level complete all as specified and as directed

Demolition of cement concrete ( unreinforced) of any description and in any position not otherwise specially provided for complete all as specified and directed

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil.

Add to (or deduct from) item No 1 above for every 3 cm or part thereof above or below 15 cm average depth

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and as directed

Removal of surplus excavation soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for 100mm thick hard core of gauge exc 63 mm but n exc. 100mm, deposited spread and levelled in layers n exc 15 cm thick, watered and rolled/rammed to a true surface broken stone or boulders,Complete all as specified and directed.

M&L for plain cement concrete type D2 1:4:8 (40mm graded aggregate) in foundations, filling,sub base and mass concrete complete all as specified and as directed.

M&L for Providing PCC 1:2:4 type B-1 using 20mm graded crushed stone aggragate as in floor,roof kerbs ,mud stops,rounded or chamfered edges , benching & coping including necessary form work & construction joints complete all as specified and directed .

M&L for Brick work built in cement mortar 1:6 using old size sub class "B" bricks in wall straight or curved on plan exc 6m mean eadius complete all as specified and directed .

M&L RCC 1:11/2:3 type A1 (using 20mm graded aggregate) as in Slabs supported on walls,beams and ,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete complete all as specified and as directed

M&L for TMT bars mild steel bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

M&L for TMT bars mild steel bars, 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

M&L for TMT bars mild steel bars, 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed

Taking down cement or cement lime plaster of any description from brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) in CM 1:4, complete all as specified and as directed

M & L Rendering 10mm thick on fair faces of brick work in CM 1:6 finishing even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paints over a coat of primer complete all as specified and as directed.

M&L preparing New plastered surfaces on walls one coat of primer paint, and applying two coat of oil bound distemper with 1 mm wall care putty complete all as specified directed.

Supply & Fixed in repair Galvanised steel water tubes 20 mm Dia, medium grade', galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed .

M&L for Glazed ceramic coloured tiles in vertical surfaces 350 x 250x7 /450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, & incl 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Providing precast cement concrete louvres and jallies Type B0 1:2:4 (12.5mm graded aggregate) set in cement mortar 1:4 ,40mm thick (measured solid), including all mould- ings but excluding frame complete all as specified and directed.

Dismantling Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws complete all as specified and directed.

S&F steel work in tubular trusses including (purlins and rafters) special shaped washers etc complete using ERW or imnduction butt welded tubes complete all as specified and directed. .

M&L for steel work in Stairs (framed) including stringers, treades, landing,balusters, hand rails etc. including cleats, brackets, etc. complete all as specified and directed. Note:- Rates included for required materials/cutting holes for fixing Staircase to brick wall / ground and making good the surface.

M&L for preparation of new steel surface over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for preparation of old steel surface over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for machine cut kota stone slab, 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including, cutting with and including 20 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and as directed.

M&L for providing and fixing MS metalic board of size 1.00 x1.00 M,of thickness 3 mm with MS framework of height 2.0 m with angle (60x60x6 mm) and including fixed in post holes with PCC 1:4:8 including excavation and removal of soil and the board is to have appropriate hooks for hanging fire extingushers including two coat painting with synthetic enamal paint(yellow colour) over a coat of red oxide primer including operating instructions are to be written with red paint of approx 1000 to 1500 letters(small) complete all as specified and directed .

M&L for Plain cement concrete 100 mm thick ,type D-2, 1:4:8 using 40 mm graded stone aggregate as in sub base , complete all as specified.

M&L for Plain cement concrete 100 mm thick ,type B-1, 1:2:4 using 20 mm graded stone aggregate as in flooring/pavings ,complete all as specified.

M & L for forming 12 mm thick expansion joints filed with pre formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade 'A', Complete all as specified and directed.

M & L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound, Grade 'A', Complete all as specified and directed.

Providing and laying 80mm thick factory made ISI marked chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for Plain cement concretetype C-2, 1:3:6 using 40 mm graded stone aggregate as in foundation of drain, complete all as specified.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc.

M&L for brick work with sub class 'B' bricks (Old size brick) Straight or curved on plan exc 6mtr mean radius built in cement mortar 1:4, complete all as specified and as directed.

M & L Rendering 15mm thick on fair faces of brick work in CM 1:4 mixed with water proofing compound, finishing even and fair without using extra cement. (WPC shall be measured and paid separately)

Supply only Liquid waterproofing compound

M&L for 300 mm internal dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars laid in trenches and jointed in cement mortar complete all as specified and directed

MM & L for PCC 1:3:6 type C2, using 40 mm graded stone aggregate, as in bed to drain pipes of 150 mm bore, including packing under and completely sourrounding pipe with concrete after they are laid and tested, all as specified and directed.

M&L for 150mm internal dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointed in cement mortar complete all as specified and directed

M&L forconstruction of Soakage wells of size 3 m dia x 6 m efective depth, excavation in any type of soil ,foundation in PCC 1:3:6,walls of honey combed masonry with top ring of M25 concrete incl intersepting chamber and screen chamber made of brick masonry in CM1:4 , RCC cover slab in M25/SFRC cover , interconnecting pipes of RCC/DWC,well shall be filled with brick bats complete all as specified and as shown on drawings. Note:- Drawing No CEJZ/STD-301/90 sheet No 1/4 to 4/4 dt16.06.90 shall be followed.

M&L sand cushioning with a layer of dry river sand 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts complete all as specified and directed Note: Punned down thickness (overall 18cm), shall be considered for measurement and payment.

M&L, locally available , sub class 'B' bricks (old size) laid flat and dry in trenches over the cable for protectionprependicular to the direction of cable adjacent to each other complete all as specified and directed.

Supply , laying, testing and commissioning, LT under gound cables XLPE insulated screened PVC bedded galvanized steel strip armoured electric power cable (heavy duty) with alumininum conductor cross sectional area 10 Sq mm 4 core LT, 1100 volts grade , laid in trenches , along poles or passing with through pipe or laid under floor or through/ on walls etc, complete all as specified and directed by Engr-in-charge

Supply and fixing pre-casted RCC earth pit cover for replacing/dismantling broken/ unserviceable pit cover including cleaning the surronding area (60 x60 60 cm) complete all as specified and directed

Supply & laying in repair GI pipes 40 mm dia, medium grade with all necessary fitting laid in trenches or with walls laid for replacement including taking out directed by EIC.

Material and labour for Copper strip 25mm x 3.15 mm with saddles and fixing screws on porcelain insulators on roof and floor complete all as specified.

Supply and fixing, porcelain supporting insulator as per required at site, fixing, on wall/roof for supporting the lightning arrester earthing strips including Nut Bolts and Washers, complete all as specified and directed.

Material and labour for Brazing on Copper earth strip of size up to32x6 mm on wall and floor or as per site requirement , including necessary cleaning of earth strip before applied brazing.

Material and labour, mild steel plain sheet 3 mm thick, cut to size and shape, fixed with hinges to steel members including bending, welding, fixing securely using bolts, nuts etc as required as in earth pits covers and applying two coats of synthetic enamel paint of approved colour over a coat of red oxide primer,complete all as specified and directed

Supply and fixing Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws type 410 SP-31 9 Mtr long one coat of Synthetic enamel paint black/yellow from ground level /copping remaining Job portion painting with one coat of aluminium paint including the pole terminal etc as specified and directed.

Material and labour plain cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in bottom of pit for bed concrete of foundation of poles etc complete all as specified and directed by Engr-in-charge.

Material and labour plain cement concrete 1:3:6 type D-2 using 40 mm graded crushed stone aggregate as in bottom of pit for bed concrete of foundation of poles etc complete all as specified and directed by Engr-in-charge.

Material and labour plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in puff/coping of poles etc including use and waste necessary fair finish from work complete all as specified and directed.

Supply and fixing Bracket made out of GI pipe light grade 40 mm dia 1.50 mtr long duly welded with MS pipe capacity of 100mm dia ,30 cm long with holes ,nuts ,bolts and fixing on the top of pole complete all as specified by Engr-in-charge.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete as specified & directed by Engr-in-charge

Supply and fixing street light junction box insulated and made out of environment friendly, recyclable, UV resistant, halogen & silicon free,polycarbonate with glass fiber reinforced of size in mm should be not less then 205 X 255 X 112. The box shall be rated for Degree of Ingress Protection IP 66/67 including all fixing material as required all as specified and directed. Make: cat. Part no KF2525 of Hensel or equivalent

Supply and fixing 0.75 Sqmm (nominal area) copper conductor, twin core, FRLS, PVC insulated sheathed cable, drawn in steel pole for connection to street light fitting and making connections, including taking down old cable, complete all as specified and directed by Engr-in-charge. Make : RR Cable/Finolex/Polycab

Supply & laying n repair GI pipes 40 mm dia, medium grade with all necessary fitting laid in trenches or with walls laid for replacement including taking out directed by EIC.

Supply & laying in repair GI pipes 25 mm dia, medium grade with all necessary fitting laid in trenches or with walls laid for replacement including taking out directed by EIC.

Drilling and tapping cast iron water mains ( in position ) for branch connections of the internal dia 20 mm including S&F brass ferrule for branch connection

Supply and Fixed Gun metal globe /gate/stop valve (ISI marked) with iron wheel head screwed both ends for iron pipe of 25 mm dia fixed in repair all as specified and directed by EIC

Note: The Total amount shall subject to adjustment of credit for old Materials as per Schedule of Credit.

B S TRADERS (BID ID -3274803)

kapoor and co (BID ID -3274593)

M/S SIMRAN WALIA ENTERPRISES (BID ID -3274654)

rajan builders (BID ID -3270718)

M/s AKG Engineers & Contractors (BID ID -3274198)