REPAIRS TO STREET LIGHTS / HIGH MAST LIGHTS / POST TOP LANTERNS AND SOLAR STREET LIGHTS IN THE INNER ROADS AT AFA, HYDERABAD

Amount

Taking out the existing unserviceable street light fittings any type and S&F LED Street light fitting 20 Watt LED pressure die cast aluminum housing heat resistant toughened glass with frame, IP - 66 protection, uniform distribution suitable for 40 mm outer dia GI pipe and connecting up etc complete with 3 core 1.5 Sq mm PVC insulated sheathed copper wire ISI marked, stranded, complete all as specified and as directed. Make:- Luker Cat Part No:- LSTE-20 or equivalent

Attending day to day maintenance for checking the serviceability / repairing all Security lights / Post top lanterns / Flood lights / Dispersal lights and TMS / Hanger lights including disconnecting and taking down unserviceable all type of light fitting (LED/HPSV/MH/CFL fittings etc.) of any type and make complete from the PCC Pole / Steel tubular poles / High mast / building along the inner road of all AFA Area , including repairs to unserviceable wiring, connectors at pole junction boxes / connecting from OH lines to light fittings, minor supplying of spares like holders, connectors, screws washers etc and reconnecting / refixing and testing complete all as directed.

Note:- (i) Necessary defective spares which are required to be replaced to make proper functioning of all type security lights, shall be measured and paid seperately under relevent items as directed by Engr-in Charge.

(ii) Contractor will have to provide well experienced 1 No Electrician with 1 No Helper along with vehicle, tools and ladder etc for checking the serviceability/repairing on requirement basis in addition to man power required for execution of other routine works.

(iii) All Tools & Plants required for repair work shall be provided / arranged by the contractor at his own arrangement and expense to the trade men & helpers.

(iv) All complaints should be attended with in 24 hours of reporting of complaints. Penalty charges for non attending complaints with in 24 hrs shall be Rs 300/- per complaint .

(v) A joint inspection for checking of serviceability of security lights will be carried out with contrator's representative, user's representative and MES personal in every week.

Taking out the existing unserviceable street light fittings any type and S&F LED Street light fitting 30 Watt LED pressure die cast aluminum housing heat resistant toughened glass with frame, IP - 66 protection, uniform distribution suitable for 40 mm outer dia GI pipe and connecting up etc complete with 3 core 1.5 Sq mm PVC insulated sheathed copper wire ISI marked, stranded, complete all as specified and as directed. Make:-Luker Cat Part No:- LSTE-30 or equivalent Havells / Bajaj / Crompton

Taking out the existing unserviceable street light fittings any type and S&F LED Street light fitting 1 x 45-50 Watt LED pressure die cast aluminum housing heat resistant toughened glass with frame, IP - 66 protection, uniform distribution suitable for 40 mm outer dia GI pipe and connecting up etc complete with 3 core 1.5 Sq mm PVC insulated sheathed copper wire ISI marked, stranded, complete all as specified and as directed. Make:-Luker Cat Part No:- LSTE-50 or equivalent

Taking out the existing unserviceable street light fittings any type and S&F LED Street light fitting 70-80 Watt LED pressure die cast aluminum housing heat resistant toughened glass with frame, IP - 66 protection, uniform distribution suitable for 40 mm outer dia GI pipe and connecting up etc complete with 3 core 1.5 Sq mm PVC insulated sheathed copper wire ISI marked, stranded, complete all as specified and as directed. Make:-Luker Cat Part No:- LSTE-80 or equivalent

Taking out the existing unserviceable street light fittings any type and S&F LED Street light fitting 90 -100 Watt LED pressure die cast aluminum housing heat resistant toughened glass with frame, IP - 66 protection, uniform distribution suitable for 40 mm outer dia GI pipe and connecting up etc complete with 3 core 1.5 Sq mm PVC insulated sheathed copper wire ISI marked, stranded, complete all as specified and as directed. Make:-Luker Cat Part No:- LSTE-100 or equivalent

Supply and fix LED Flood light fitting 50/60 Watt LED pressure die cast aluminum housing heat resistant toughened glass with frame, IP - 66 protection, uniform distribution, including taking out the existing unserviceable complete all as specified and as directed. Make:-Luker Cat Part No:- LFL-50 or equivalent

Supply and fix LED Flood light fitting 150/160 Watt LED pressure die cast aluminum housing heat resistant toughened glass with frame, IP - 66 protection, uniform distribution,including taking out the existing unserviceable complete all as specified and as directed. Make:-Luker Cat Part No:- LFL-160 or equivalent

Supply and fix LED Flood light fitting 300 Watt LED pressure die cast aluminum housing heat resistant toughened glass with frame, IP - 66 protection, uniform distribution,including taking out the existing unserviceable complete all as specified and as directed. Make:-Luker Cat Part No:- LFL-300 or equivalent

Supply and fix RGB Flood light fitting 20 Watt LED pressure die cast aluminum housing heat resistant toughened glass with frame, IP - 66 protection, uniform distribution, including taking out the existing unserviceable complete all as specified and as directed. Make:-Luker Cat Part No:- LFLR-20 or equivalent Crompton/Havells /Bajaj/luker

Supply and fixing in repairs of Aviation obstruciton lights LED lights yellow painted die cast aluminium housing red cloured polycarbonate and accessories complete all as specified and as directed. Make :- Bajaj/Crompton/Havells

Supply & fixing including taking out unserviceable electronic driver for LED street light upto 30 watt complete all as directed. Note :- Driver will be procured as per sample, as required at site compatable for existing light fittings

Supply & fixing including taking out unserviceable electronic driver for LED street light 45 / 50 watt complete all as directed. ote :- Driver will be procured as per sample, as required at site compatable for existing light fittings

Supply & fixing including taking out unserviceable electronic driver for LED street / flood light 70 to 150 watt complete all as directed. note :- Driver will be procured as per sample, as required at site compatable for existing light fittings

Taking out the existing unserviceable Traffic Signal Blinker light fittings of any description and supply and fix new LED Blinker light 20Watt (Traffic Signal Light) fittings including suitable clamp, electrical connections etc complete all as directed.

Excavation in trenches in soft / loose soil not exc 1.5 m wide and not exc 1.5 m depth and getting out, including trimming the sides and forming bottom surface to required levels for laying cables complete all as specified and as directed.

M&L for River dry sand cushioning to UG cables (8 cm deep before laying of cable and 15 cm deep over the cable) in trenches including punned thickness up to 18 cm and consolidation, complete all as directed. Note :- Punned thickness only will be considered for payment.

Returning, filling in trenches in any kind soil in layers n.exc. 25 cm after laying of cables including spreading, levelling, and well ramming complete all as specified and as directed.

M&L for brick sub class B locally available best quality laid in trenches above sand cushioning for cable protection complete all as specified and as directed.

Removing surplus excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed

Supply, laying & testing insulated XLPE UG cable 1100 volts grade, armoured confirming to relevant IS specifcations with aluminum conductor of size 10 sqmm 4 core including removing and taking out the unserviceable cable all as directed. Make :- Havells/ Polycab / Finolex

M&L for light grade galvanized pipe ISI marked with all fitting ISI marked, laid in trenches, under road or fixing on wall/pole/ crossing nallah etc of bore 50 mm complete all as specified and as directed including removing and taking out the unserviceable GI pipe all as directed.

M&L for light grade galvanized pipe ISI marked with all fitting ISI marked, laid in trenches, under road or fixing on wall/pole/ crossing nallah etc of bore 40 mm complete all as specified and as directed including removing and taking out the unserviceable GI pipes all as directed.

Boring of holes under road, pavement hard standing by using trenchless technology using ultrasound technique and necessary machine to insert pipe of 50 to 100mm light grade GI pipes as per site requirement with all fittings such as bends, elbows, Tees, etc, for protection of cable complete including all plant & machinaries, alongwih Butt fusion welding machine with all accessories, T&P etc required all as specified and as directed. Note :- Protection pipe will be measured and paid separately

S & F cable junction box 200 x 160 x 98 mm in size, made out of thermoplastic, having IP 65 protection for outdoor installation fixed with 4 way bakelite cable terminals including 03 Nos polymide gland with check nut (M-32-02 N0 & M- 25 -01 N0 ) fixed on poles with aluminium clamps of size 25 x 3, unts, bolts, washers etc., including taking out of old unserviceable cable junction box complete all as specified and as directed Make Cat No . K-9250 of HENSEL or equivalent in SPELSBERG / RITTAL/ SINTEX.

Taking out the existing unserviceable existing cable and M&L for cable two core PVC insulated, PVC sheathed multi stranded aluminium conductor cable size 6 Sqmm for connection junction box to security light/pole to pole service connection complete all as specified and as directed .

Taking out the existing unserviceable existing cable M&L for cable two core PVC insulated, PVC sheathed multi stranded aluminium conductor cable size 2.5 Sqmm for connection junction box to security light complete all as specified and as directed .

M&L for one coats Aluminium paint over the exisiting steel tubular poles 7.5/9.20 mtrs above ground including cross arms/ bracings/ clamps etc complete all as specified after cleaning the existing poles and making good surface and surrounding and reflector type sticker Blue in colour and white letter all as specifeid and directed by the Engr-in-charge.

M&L for Painting to the existing cross arms /clamps / bracings/ nuts bolts and washers complete with two coats of Aluminium paint after cleaning the surfaces at height of 7 to 8.5 mtrs pole above ground level with out disturbing the conductors completely and making good complete all as specified and as directed

Taking out the existing unserviceable existing S&F all in one integrated Solar Smart LED Street light fitting 30 Watt, Solar panel of 6V 12W Polycrystalline type should be on the top of the fitting with Lithium- Ferrous Battery of 24 AH , pressure die cast aluminum housing heat resistant toughened glass with frame, IP - 66 protection, uniform distribution including suitable GI pipe bracket, complete all as specified and as directed. Make:- Luker/Havells/Phillips/Crompton/ Bajaj

M&L decorative gate lights made up unbreakable polycarbonate material suitable for retrofit LED Bulb 15w/10 w LED with B22 base commplete all as specified and directed Make : Luker or equvalent

Supply and fixing IP-65 rated LED Bollards fitting black painted MS housing with cast aluminium dome shaped threaded top cover with cylindrical,reeded poly carbonate diffuser and accessories suitable for 10 watt LED lamp including nuts, bolts and washers for fixing complete including all fixing arrangements/ footing/ foundation all as directed by Eng-in-charge. Make Crompton Cat part No-LBLTW-10-CDL equivalent

M&L decorative robust and reilable LED Post top light 30 watt with transperant diffuser Complete all as specified and directed MakeC&S , Cat Part LTGLC30WHPLED/W or equivalent

Supply only of 3 Pole power contactor of AC 3 duty rating of 40 amps having 240 volts rated no volt coil and having 2 NO (Normally open) + 2 NC (Normally closed) configuration- 01 No

Supply only of 3 Pole power contactor of AC 3 duty rating of 63 amps having 240 volts rated no volt coil and having 2 NO (Normally open) + 2 NC (Normally closed) configuration- 01 No

Supply only of Auxilary contact ,2 No 0.5 module having 240 volts rated ,Complete all as specified and directed

Supplying , laying & testing in maintenance copper trailing cable 5 core 4 sqmm EPR insulated PCP scheathed connected high mast lights confiring to relevant IS specification including dismantling and taking out the unserviceable cable complete all as specified and directed

Sypplying and fix under water LED light 12 watt 220 volt of aluminium body RGB in colour 50 hz. complete all as specified and dircted

L and S ENTERPRISES