GE/ALP (8608) KOLKATA OF 2025-26

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver with IP 65/66 protection and system efficiency >120Lm/W complete all as specified and directed. Make : Crompton cat pt No CRP-421-70-57-SL-LM-NSG or equivalent in make of Havells/Bajaj/Magik

Supply and fixing LED flood light 100 watt 230 V AC outdoor type made of pressure die cast aluminium housing with toughened glass with SMD LEDs and IP65 and system efficiency >120Lm/W complete all as specified and directed. Make : Crompton cat pt No TFS-522-100-30-NL-SL-NS-GL-NSG or equivalent in make of Havells/Bajaj

Supply and fixing 25 watt LED post top lantrerns fittings made in Iron, housing with decorative clear acrylic diffuser and IP 65 protection with and including LED lamp and all necessory electric connection with from junction box to post top lantern complete all as specified and as directed.

S & F M.S. Fabrication work consisting of wire mesh, M.S. Angle squire pipe, Flate etc duly cut into shape and size to fabricate cage for Post top lanterns mounted on boundary wall complete as specified and as directed by Engr-in-charge including grouting on wall, one coat of red oxide meteal primar and two coats of synthetic enamel paint complete all as specified and directed.

S&F GI bracket on street light pole/ boundary wall for post top lantern made of 40 mm dia light grade GI pipe including fixing clamps, nuts and bolts,/cement work and painting with two coats of aluminium paint over a coat of red oxide metal primer complete for maximum length of 1.20mtr complete all as specified and as directed.

Supply installation and erection in trench vertical position steel tubular swaged welded poles complete with MS base plate of 6mm thick of size 450mmx450mm finial taper plug pole cap, bolts, nut and screwed pole made out of ERW MS tubing conforming to IS 2713 Part II of 09 mtr long 410, SP-55 incl drilling of holes of required size of nos for fixing of cross arms bracing support /taking out of cables etc, with inbuilt junction box for 3 phase 4 wire AC supply and painting of aluminium paint for exposed surface and two coat of black bituminious paint for the portion embeded in concrete complete all as specified and as directed

S & F Cross arms, bracings, supports, clamps and back plate fabricated from structural steel sections including nuts, bolts, in any shape or size as indicated or directed and including applying two coats of aluminium paint over a coat of red oxide primer and Anit climbing device comprising 2.24mm dia Galvanised Steel 2 strand barbed wire with 2mm dia barbs wrapped spirally round poles complete all as specified and directed.

M&L for stay assembly rod 20mm dia complete with accessories as shown in Electrical plate No 1 (Loop type insulator , stay clamps, excavation and concrete measured separately) complete all as specified and directed.

M&L for Plain cement concrete ( 1:4:8) type D-2 (using 40mm graded crushed stone aggregates) as in foundation of poles etc complete all as specified and directed.

Materials and labour for plain cement concreate (1:3:6) type C2 (using 40 mm graded stone aggregrate) as in foundations filling, coping for pole and mass concreate filling of trench across the road etc. complete all as specified and as directed.

M&L for Plain cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in coping of poles complete all as specified and directed.

S&F thermoplastic street light junction box, weather proof having ingress protection level IP-66 and size L (254-255mm)x B (180-205mm)x H(111-112mm) dually fixed with Aluminium flat clamp and support made of 25mmx3mm/Flush in existing wall, duly painted with aluminium paint over a coat of red oxide metal prmer complete (including 1 no 5 way cable connector suitable to connect 16 Sqmm Aluminium cable 3 nos polymide cable gland having sealing range 17-25 mm complete with 1 no 19 mm PVC blend) complete all as specified and directed.

Supply and laying steel tubing GI light grade for cable protection passing under road/floor or for fixing to poles all as spd and directed of size 80mm bore complete all as specified and directed. Make : Jindal/Zenith/TATA or equivalent make as approved by GE

Supply and laying steel tubing GI light grade for cable protection passing under road/floor or for fixing to poles all as spd and directed of size 40mm bore complete all as specified and directed. Make : Jindal/Zenith/TATA or equivalent make as approved by GE

Supply and laying for under ground heavy duty XLPE insulated, armoured aluminium conductor cable 1100 volts grade, cross-sectional area 25 sq. mm 3.5 core in trenchches / through pipe or bare in road crossing / plingth/ drain/ duct/ floor along pole / wall /ceillings etc complete all as specified and directed. Note:- Earth work, bricks protection sand cuisioning shall be measured and paid seperately.

Supply and laying for under ground heavy duty XLPE insulated, armoured aluminium conductor cable 1100 volts grade, cross-sectional area 16 sq. mm 4.0 core in trenchches / through pipe or bare in road crossing / plingth/ drain/ duct/ floor along pole / wall /ceillings etc complete all as specified and directed. Note:- Earth work, bricks protection sand cuisioning shall be measured and paid seperately.

Cutting existing metal/bituminus road/PCC walk way/any type of tile works n.exc 0.45m width and n.exc 0.90 m in depth including all connected earth work and making good disturbed surfaces matching with the existing specification and finish including disposal of surplus material to a distance n.exc 50m complete all as specified and as directed.

Supply and fix 6KW, 3 phase capacity timer streeet light controller panel complete all as specified and directed.

Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m in depth for foundation or for laying of cable , fixing of pole etc and getting out in soft/loose soil, old serviceable bricks etc complete all as specified and as directed.

Returning, filling in trenches including spreading leveling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level , not exceeding 1.5 metre above the starting point complete all as specified and as directed.

Materials and labour for sand filling 23 cm thick above the cable with approved quality coarse sand for sand cushioning of under ground cable including spreading and punning down to desired thickness of 18 cm complete all as specified and as directed.

Supply and laying for burnt brick sub class 'B' locally available best quality laid in trenches for protections of under ground cable complete all as specified and as directed.

M&L for modular metal flush box 2 module one omplete all as specified and directed.

M&L for modular white cover plate with frame 2 module complete all as specified and directed.

M&L for modular white cover plate with frame 3 module complete all as specified and directed.

M&L for modular metal flush box 3 module one omplete all as specified and directed.

S & F modular type mini MCB 32Amp SP C Series 3KA white complete all as specified and directed.

S & F modular type 25 A Motor starters white colour complete all as specified and directed.

S & F modular type 10/25A 3 Pin Shuttered Socket white colour complete all as specified and directed.

S&F 25A 3 pin plug top complete all as specified and directed.

Material and labour for circuit/sub-main wiring with two run of 1100 V grade PVC insulated & unsheathed 6.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 6.0 Sqmm 1100 V grade FRLSH PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through concealed PVC conduit complete all as specified and as directed. Note : (i) Three runs of 6.0 Sqmm cable shall measured as one length. (ii) Cutting chases, pinning in, making good to facings etc shall be included in sub-main wiring. Make : Polycab/KEI/Havells or equivalent make as approved by GE

Supply and laying out of copper refregerent pipe 5/8" dia with PUF insulation as per required length at site complete with brazing and flaring nuts of suitable size (brass) complete all as specified and directed.

Supply and laying out of copper refregerent pipe 1/4" dia with PUF insulation as per required length at site complete with brazing and flaring nuts of suitable size (brass) complete all as specified and directed.

Supply and laying out of suitable size of drain out pipe of indoor unit of Split AC complete all as specified and directed.

Supply and fix decorative five star rated with brushless direct current motor (BLDC) ceiling fans 1200 mm sweep complete with blades, down rods, electronic regulator and accessories, 230 V, min air delivery 245 CFM complete all as specified and directed. Make: Havells Cat No FHCLB5SPWT48 or equivalent in make of Bajaj/Usha/Crompton as approved by GE

Please Enable Macros to View BoQ information