basketball maidan and high mst light gida

Supply and erection of Galvanized Iron pole with galvanizing done in single dipping (Average coating thickness Minimum 65 Microns) continuously tapered poles having Octagonal / Circular cross-sections designed to withstand the maximum wind speed as per IS 875, The pole shaft shall be made from sheet steel (HT Steel Conforming to grade S355JO) and confirming to BSEN 10025 and shall be continuously tapered with single longitudinal welding. There shall not be any circumferential welding. The welding of pole shaft shall be done by Submerged Arc Welding (SAW) process. pole shafts shall be provided with the rigid flange plate of suitable thickness (Fe 410 conforming to IS 226 / IS 2062) with provision for fixing 4 no. foundation bolts, This base plate shall be fillet welded to the pole shaft at two locations i.e. from inside and outside.The octagonal Poles shall have lockable door of approximate 500 mm length at the elevation of 500 mm from the Base plate with bakelite sheet having 6A SP MCB and 16 sqmm stud type connector ( 4 nos) inside the pole at door opening for cable connection of following length and dimension as per table P-01 with base plate and foundation bolt on the Existing cement concrete foundation.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .pwd electric bsr item no. 18.1.1.10 12 Mtr Pole

Providing and Laying RCC Foundation for Octagonal / Conical Street Light poles, High mast Poles as per Drawing attach at Table P-4 with Following Procedure & All as per pre approved by Engineer in charge.For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR Pole Foundation for Octagonal pole from 10 Mtr. To 12 Mtr bsr 18.8.3

Providing & Fixing of IK08IP-66protected high power LED flood light system with single piece Pressure diecast aluminium housing,toughened glass diffuser with suitable lenseson LED to achieve various beam angles, of highpower LED of 3 to5 watt each. bsr 18.11.8 High Power LED Flood Light Minimum lumen output 26000 lm

Providing & Laying XLPE insulated & P.V.C. sheathed Armoured Aluminium cable confirming to IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing commissioning etc. as required of following size.bsr 11.2.1.1

Pole ring

lhesaV dkØhaV lM+d dh Åij dh lrg ij 1 % 1-5 % 3 vuqikr dh dUVªksyM dkØhaV ,e 20 xzsM dh 20@25 fe-eh- lkbZt dh fxzV Ø'kj ls VwVh gqbZ dks feykuk] Mkyuk rFkk uhMy rFkk lrgh dEiu e'khu ¼ckbZozsVj½ pykuk rFkk uk f[kldus okyh lrg ds fy,] pkgs x, xzsM] dsEcj ;k lqij ,yhos'ku es rS;kj djukA Item NO 142 B

नीव खाई परनाला में 1-5 गहराई तक मिट्टी की खुदाई करना तल को कूटना पानी डालना बगल को संवारना खुदी मिट्टी को बाहर निकालन, नीव भरने के बाद खाली स्‍थानों को पुन मिट्टी से भरना तथा बची हुई मिटटी को 50 मीटर की दूरी तक निस्‍तारण करना      item no 2(A)

खुदी हुई मिट्टी/रेत को नीव में तथा कुर्सी में 50 मीटर तक दूरी (Lead) में डालना तथा समतल करना , पानी डालना तथा दूरमुट से कुटना।      item no 5

सड़क निर्माण सामग्री की आपूर्ति। शून्‍य काटने के बाद।       63-40 मिमी क्रेशर से टूटी item no 6.4

lM+d dh uhao ds fy, ,e 10 xzsM dh lhesaV dkØhaV 1%3%6 dks feykdj fcNkuk rFkk uhMy rFkk ljQsl dEiu e'khu dks pykuk rFkk 40 fe-eh- ds Ølj }kjk VwVh gqbZ fxêh dks feykrs gq,] pkgs x, xzsM] dsEcj rFkk lqij ,yhos'ku es rS;kj djukAItem NO 141(b)