Renovation work of one room in faculty building at ISI Campus Delhi Centre New Delhi110016

Amount

Removing dry or oil bound distemper, water proffing cement paint and the like by scrapping, sand preparing and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. Approved samples : - WALL PUTTY BIRLA WHITE/ J.K WHITE/FERROUS CRETE/ SARA PUTTY

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : Approved samples : - ASIAN PAINTS/BERGER PAINTS/SHALIMAR

New work (two or more coats) over and including water thinnable priming coat with cement primer

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Approved samples : - ASIAN/BERGER/ ICI( DULUX)/ NEROLAC/ ALTEK

Two or more coats on new work

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the anufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Approved samples : - KAJARIA/H & R.JOHNSON/NITCO/ SOMANY./VARMORA

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm Approved samples : - H & R JOHNSON/KAJARIA/NITCO/ VARMORA/SOMANY

Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm.

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.

Providing and fixing to existing door frames.

30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : Approved samples : - DORMA /HAFELE /GEZEI/KICH/GODREJ/HARDWYN /BECKER FIRE SOLUTION/MARSHALL

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Twin rubber stopper

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : Approved samples : - DORMA /HAFELE /GEZEI/KICH/GODREJ/HARDWYN /BECKER FIRE SOLUTION/MARSHALL

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : Approved samples : - DORMA /HAFELE /GEZEI/KICH/GODREJ/HARDWYN /BECKER FIRE SOLUTION/MARSHALL

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

With cement mortar 1:4 (1 cement : 4 fine sand)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, huttering and finishing:

1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 600x450 mm Approved samples : - AIS/ATUL/SAINT GOBAIN/ MODIGUARD

Providing and fixing , Towel Ring hindware Cat. No.: F450023, with complete as per direction of Engineer-in-charge.

Providing and fixing pedestal type wash basin with C.I. brackets, Hindware Cat. No.: 10001, Ped.: 11003, Size: 63 x 45 x 83 cm as per direction of Engineer-in-charge.

Providing and fixing , Center Hole Basin Mixture Hindware Cat. No.: F570014, with complete as per direction of Engineer-in-charge.

Providing and fixing , Angular Stop Cock Hindware Cat. No.: F740039, with complete as per direction of Engineer-in-charge.

Providing and fixing soap dish Hindware Cat. No.: F580004, with complete as per direction of Engineer-in-charge.

Providing and fixing bottle trap Cat. No.: F850072, project 300 mm and 250 mm with complete as per direction of Engineer-in-charge.

Providing and fixing waste coupling 32 mm SS (Full thread ) bottle trap Cat. No.: F860010, with complete as per direction of Engineer-in-charge.

Providing and fixing uplasticised PVC connection pipe with brass unions :

45 cm length

15 mm nominal bore

Providing and Fixing CPVC Pipe 50 mm (make Astral/prince/sudhakar/supreme)

Providing and Fixing Reducer 25 mmto 50 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Approved samples : - ASTRAL/ AJAY FLOWGUARD / ASHIRWAD/ PRINCE/SUPREME/FINOLEX/SFMC External work

20 mm nominal dia Pipes

Providing and Fixing ball valve-25 mm (make Astral/prince/sudhakar/supreme)

Providing and Fixing Tank Nipple -25 mm (make Astral/prince/sudhakar/supreme)

Cutting holes up to 30x30 cm in walls including making good the same:

12 mm cement plaster of mix :

1:4 (1 cement: 4 fine sand)

YogpriDeal

SWAGATAMA ENTERPRISES

Sat Sahib Construction

M/S Syed Parvez Ali

UDYAMIN ENTERPRISES

SHREE RAM CIVIL CONTRACTOR

Radialtech Engineering (P) Ltd.

Royal Enterprises