REPAIRS TO HANGER DOOR / ROLLING SHUTTER, PLASTERING AND MISC ITEMS AT TECHNICAL AREA AND CAMOUFLAGE AND PERIODICALS AT AF STN DEOLALI

Amount

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

M&L 1.6mm thick mild steel, plain black sheet in door shutter, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including sheet welding in frame, bending or turning up, mitred angles, etc. as required

M&L for mild steel roller of existing size approx 10 cm to 14 cm dia including bearing and welding to angle iron door frame and neessary flat iron clamps bolts, necessary greasing and oiling complete all as specified and directed by Engr-in-Charge.

Demolition of reinforced cement concrete (Reinforcement cut as required to facililate demolition) (below or above ground level ) not exceeding 15 cm thickness

M&L for cement concrete type B-1 ,1:2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets, chajja and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Dismantling of CGI/PGI sheet as in roof covering including ridge .

Dismantling of Asbestos cement (corrugated, semi corrugated etc) sheets in roof covering including ridge..

S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick including ridge of an colour having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws as specified.

S&F pre- painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5 mm thick including ridge of an colour having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws as specified.

Dismantling wrought iron or mild steel work in any description not otherwise provided for.

S & F rolled mild steel angle/tubular/square/rectangular roof trusses (framed), trussed purlins, rails and fastenings and heavy bracket framing, confirming to Fe 410 - W including distance pieces, cleats, etc., complete.

M&L for preparing old painted steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enemal paint complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing the debris off the premises

M&L for 100 mm thick cement concrete type B-2, 1:2:4 (using 40mm graded aggregates) as in path/PCC road/hardstanding and PCC should be laid in alternate ways and the area of one panel should not be exc 10 Sqm/each and finishing the surface of concrete roads/paths/hardstanding by brooming all as specified and directed by Engineer-in-charge.

M &L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A'.

M&L for 50 mm thick Cement concrete 1:3:6 type C1, (20 mm graded aggregate), as in plinth protection, finishing cement concrete surface even and fair without using extra cement complete all as specified.

S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed by Engg. In charge.

S&F in repair 3mm thick sheet glass ordinary quality and size in any type of frames and glazing with oil putty (or beading) in square n.exc. 0.5 Sqm each including hacking out old broken glass from wooden/steel frames complete all as specified.

Dismantling ceiling boarding of any description fixed in any position with nails incl cover fillets/aluminium snap grid.

S&F Anodised aluminium snap grid frame work size 605x605 mm for false ceiling incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long all as specified & directed by Engr -in-charge.

M & L Non asbestos fibre cement building boards 4 mm thick (one side embosed design), fixed or laid/ inserted to Aluminium grid frame work in ceiling with clips all as specified and directed.

Fixing only in repairs Asbestos Cement Plain building boards/Non asbestos fibre cement building boards any thickness, fixed to timber/ Aluminium frame work with screws in ceilings.

S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed

S & F in repairs 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed.

Dismantling water storage tank 500 ltrs & n.exc. 1000 ltrs all as specified

M&L Rotational moulded polyethylene water storage tanks of 1000 ltr capacity (cylinderical verticla with closed top ) hoised and fixed in position all as specified in SSR part I

S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed

M&L in repair steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod , hasp staple and one coat of primer , erected in position as indicated, complete : push pull but gear operated type with bevel gear box and crank handle and all as directed by engineer in charge.

M&L for safty lever locks mild steel with 4 lever for rolling shutter s and all as directed by engineer in charge.

M&L in repair ball bearing for rolling shutters and all as directed by engineer in charge.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc. Note the area includs in this up to 4th stories building complete all as specified and directed.

M&L for 15mm thick Rendering on fair faces of brick work or concrete sureces in Cement Moratar 1:6 finished surface even and smooth without using extra cement complete all as specified and directed..Note the area includs in this up to 4th stories building

M & L for prepariation of New plastered surfaces and applying two coats of distemper oil emulsion over a coat of chalk whiting for preparatory to distempering on surfaces of walls.

M&L for 15mm thick Rendering on fair faces of brick work or concrete sureces in Cement Moratar 1:4 finished surface even and smooth without using extra cement complete all as specified and directed.Note the area includs in this up to 4th stories building

M & L for prepariation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resitant primer on surfaces of walls.

M & L for prepring old plaster surface and applying one coat of cement base paint on wall surface having no sign of brush marks complete all as specified and directed.

M&L Preparing old plastered surfaces of walls and applying one coats of oil bound emulsion complete all as specified and directed.

M&L preparing old plastered surfaces of wall and applying one coat of white wash complete all as specified and directed.

M&L for 5mm thick Rendering on ceiling surface fair faces of brick work or concrete sureces in Cement Moratar 1:3 finished surface even and smooth without using extra cement complete all as specified and directed. Note the area includs in this up to 4th stories building

M & L for prepring new plaster surface applying two coats of Plastic emulsion paint on wall surface with roller brush over 1 to1.5 mm thick wall putty finished even & smoothcomplete all as specified and directed.

M&L preparing old plastered surfaces of wall and applying one coat of white wash complete all as specified and directed.

M&L preparing old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L Preparing old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L Preparing newly plastered surfaces of walls and applying two coats of oil bound distrember over 3 mm thick wall putty finished even & smooth complete all as specified and directed.

M&L Preparing old plastered surfaces of walls and applying two coats of oil bound distember over 3 mm thick wall putty finished even & smooth complete all as specified and directed.

M&L Preparing old plastered surfaces of ceiling and applying one coats of oil bound emulsion complete all as specified and directed.

M&L Preparing new plastered surfaces of ceiling and applying two coats of oil bound emulsion complete all as specified and directed.

M&L for complete removal of existing treatment on walls including washing down, rubbing down and applying Two or more coats of 100% Premium exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. as specified.

M&L Preparing old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and one coat of synthetic enamel paint complete all as specified and directed.

M&L preparing old painted surfaces on brick, stone,concrete, asbestos cement or plaster surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel paint.

M&L for preparation of old surfaces with compolete removal of existing surfaces by scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots etc and applying two coats of exterior acrylic emulsion (APEX)/ equivalent of camouflage pattern or pattern approved by Engineer-In_charge over one coat of exterior water based wall priming including provision of scaffolding upto 9.00 m required for the treatment of external surfaces of building with required safety measures etc complete all as specified and directed by Engineer-In-Charge. Note : The work shall be executed stage wise and each stage will be passed by Engineer-In-Charge

SIDDHIVINAYAK ENTERPRISES

M/s Lakhanpal construction company

SHREE SAMARTH SERVICES