COMPREHENSIVE MAINTENANCE FOR B/R INCL LEAKAGE/SEEPAGE SUNKEN TREATMENT, FLOORING, JOINERY AND ALLIED WORKS AND OTHER RELATED WORKS IN DOMESTIC AREA AT 11BRD AF STN OJHAR

Amount

Taking down chowkats/Frames of area n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) each. complete all as specified and as directed.

All as per item No 1 above but area exc 1.5 Sqm & n.exc 4 Sqm. complete all as specified and as directed.

Taking down shutters of any description of area exc 1Sqm & n.exc 2 Sqm complete all as specified and as directed.

S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

M&L Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, doors or gates, ladders, framed balusters, walk ways, railings, frame work of watertanks etc ant type of work complete all as specified and directed. Fe 410 -W (Gde- E- 250) quality-A

S&F Factory made 2nd class hard wood plain, framed , paneled shutters 35mm thick (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (part-I) , kiln seasoned and chemically pressure treated complete

S & F for 30mm flush Shutter , Solid core construction , with block board core and plywood face Panel commercial type on both sides complete all as specified and as directed.

S&F 2nd class Hard wood glazed/skeleton shutters 35mm thick open rebated prepared to receive glass, gauze etc devided in squares with plain, chamfered or rounded, mitred and rebated sash bars any number with plain, chamfered or rounded, mitred and rebated beads for securing glass gauze etc. complete all as specified and as directed.

S&F for Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tubes, in opening as per specification & drawing given in SSR-2004 complete all specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered withheat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the style & rails with suitable PVC sheet beading, and jointed togather with solvent cement,supplying & fixing in the frame at site as per specification and drawing

M&L for small articals such as hold fasts etc. of Flat Iron 25 x 3, Grade confirming to Fe-310-0 or Fe-410-0. complete all as specified and as directed.

S&F mild steel butt hinges medium weight cold rolled of size 100 mm shutters. complete all as specified and as directed.

S&F in repairs mild steel butt hinges medium weight cold rolled of size 100 mm. complete all as specified and as directed.

S&F Extruded Aluminium alloy handle fabricated type, anodised of size 150mm. complete all as specified and as directed.

S&F in repairs extruded Aluminium alloy handle fabricated type, anodised of size 150mm. complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm. complete all as specified and as directed.

S&F in repairs Aluminium anodised barrel tower bolt of extruded section of size 150mm. complete all as specified and as directed.

S&F in repairs Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 size in hinges 100 mm

S&F 250 mm Aluminium alloy, anodised sliding door bolt, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sloding bolt of extruded section or cast alluminium alloy of size 250mm. complete all as specified and as directed.

S&F in repairs 250 mm Aluminium alloy, anodised sliding door bolt, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sloding bolt of extruded section or cast alluminium alloy of size 250mm. complete all as specified and as directed.

M&L for Welding in repairs exceeding 2.5cm not exc 5 cm in length (thickness of metal to be welded not exceeding 6mm) including cleaning preparing the surface and holding the members in true position for maintenance of steel items such as gates, grills, doors, windows etc., complete all as specified and as directed.

S & F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed to steel/alluminium window and ventilator compete all as specified as directed by Engineer -in -charge . ( work shall be carried out in MD Qtrs/ OTM accns in different locations of Domestic/ Technical area as per site requirements upto 4 storieyed building) the rates includes providing of MS beads of standard section fixed with SS screws)

S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tracks or wooden beeding patti.compete all as specified as directed by Engineer -in -charge

S & F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tracks or wooden beeding patti.compete all as specified as directed by Engineer -in -charge ( work shall be carried out in MD Qtrs/ OTM accns in different locations of Domestic/ Technical area as per site requirements upto 4 storieyed building)

Repairs to aluminium door shutter of any description and size including taking down from frames for realignment and tightening including adjusting the shutter removal and refixing hydraulic or floor door spring , and hinge , refixing shutter in same opening with all necessary repairs /refixing ,including replacement of damaged jointing cleats ,glazing clips , rubber packing ,aluminium beading , screws etc also including provision of 6 mm dia through bolt with nut on both side for top and bottom rail. complete all as specified and as directed by Engineer-in-charge. ( work shall be carried out in MD Qtrs/ OTM accns in different locations of Domestic/ Technical area as per site requirements upto 4 storieyed building) Hydrolic door closer/ door spring if preplaced under separete items

Supply only Aluminium extruded section Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

Taking down existing window shutteer leaf of size upto 0.75 sqm each by cutting hinges including making good the surface of removed hinges by grinding complete all as specified and as directted.

M & L for powder coated aluminium sliding window with anodized aluminium frame of 3 Track of size 92mmx32mmx 1.5mm thick, with sliding shutters(02 glass and 01 Wirecloth) with necessary channels (top rail, bottom rail and style of size 40mmx 18mm x1.10 mm thick) including glazing with tinted sheet glass panel 4.00mm thick and Aluminum alloy wirecloth 004mm nominal dia and avg width of aperture 1.4mm, fitted with necessary jointing cleats, glazing clips,locking device one for each shutter , rubber packing, aluminium beading, screws, rawl plugs including all necessary holes / drilling etc, complete all as specified as directed by Engineer -in -charge

M & L for providing Aluminiium shutter with Powder coated frame 88.9mmx47.63mmx1.60 mm thick fixed with heavy duty aluminium hinge of size 125mm and size of shutter with top rail , middle rail and bottom rail and style of size 85 mm x 44.5 mm x 1.56 mm thick with 200 mm size powder coated 2 nos with each leaf , Heavy duty powder coated aluminium tower bolt 150mm long 2 Nos per leaf, 3 nos Heavy duty aluminium powder coated of size 125mm with each leaf including 12 mm thick both side prelaminated particle board / 5.5 mm thick glass pane in the both panel with necessary joining cleats, rubber packing, aluminium beading, screws etc complete all as specified and as directed by Engineer-In-Charge. (Note - all fitting shall be of same finished as of door shutter and shutter may be single/ double leaf if the shutteris more than 1.10mtr shutter shall be of double leaf, the hollow section of vertical style where the hinges are to be provided the complete vertical style shall be provided with soft wood and minimum 65mm long screw provided for fixing of hinges)

S&F aluminium powder coated frame for louvers section of size 75x40x1.6mm including 4mm thick glass in louvors of 100 mm width with glazing cleat and revolving arrangement of standard section of aluminium including rubber packing, aluminium beading or gasket for for aluminium sections for fixing glass sheet and necessary fittings complete screws plugs, handle, tower bolt, stay hooks including fixed Aluminium wire cloth etc all as specified and directed by Engineer in Charge.

Hacking out old broken glasses any thickness size, quality or description from metal frames including punching or drilling out old glazing pins / spring clips and providing and fixing new ones. hacking any bldg hight complete all as specified and as directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.80 Sqm in each panes fixed any bldg hight complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in square n. exc 0.50 Sqm in each panes fixed any bldg hight complete all as specified and directed.

S & F in 4mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane foe steel/aluminium window complete all as specified and as directed.

S&F floor door stopper ( overall length of cover plate140 mm) of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in repairs in floors. complete all as specified and as directed.

S&F Stainless steel 25 mm dia curtain rod, bright finish, including set of fixing brackets (wall & end), fixed to wall in repairs,with finols/finnels, connected accessaries, rubber packing, required screws and rawal plugs, complete all as specified and directed.

Dismantling of existing cupboard /Kitchen Shutter , shelves & Self n exc 3.2 Sqm complete all as specified and as directed

S & F in repairs 18mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, as in Partition Cupboard shelves including providing wooden brackets for support of laminated boards and the like fixed in wooden frame with wooden lbeading complete all as specified and as directed.

M& L 12mm thick ,7 nos of ply Plywood, grade BWR, type BB, fixed with screws as in cup board shutters/ shelves and pelmets box complete all as specified and as directed.

S & F 0.9 mm thick decorative laminate type 1 of surface finish colour and pattern as approved fixed with approved adhesive as per manufacturer's instruction complete all as specified and as directed.

S & F 75mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 complete

S&F in repairs 75mm Brass handle, cast type, polished bright , fancy type complete all as specified and as directed.

S & F in repairs 75mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screw complete all as specified and as directed.

S & F in repairs Magenatic ISI marked door lock for Kitchen/ cupboard door shutters complete all as specified and as directed

Servicing of rolling shutter greasing/oiling serviceing for smoothy functioning for all parts including ball bearing, Spring, gear assembly,welding while required etc, rolling shutter push pull or manual type, size n exc 10 sqm complete all as specified and directed.

Servicing of rolling shutter greasing/oiling serviceing for smoothy functioning for all parts including ball bearing, Spring, gear assembly,welding while required etc, size exceeding 10 sqm but not exc 20 Sqm complete all as specified.

Easing, adjusting, greasing of base wheel & top grid wheel and repairs to steel door , each shutter leaf n exc12 Sqm, including minor repairs, welding, change of damaged base wheel, guide wheel, nut bolt, bearing balls etc to sliding door leaf for noiceless smooth operation complete all as directed.

Easing, adjusting, greasing of base wheel & top grid wheel and repairs to collapseable shutter, each shutter leaf n exc 6 Sqm, including minor repairs, weilding, change of damaged guide channel, handle, members etc to sliding door leaf of hanger for noiceless smooth operation complete all as directed.

S&F in repair MS Spring suitable for rolling shutter upto 10 Sqm

S&F in repair MS Spring suitable for rolling shutter size exceeding 10 sqm but not exc 20 Sqm

S&F in repair MS ball beraing for rolling shutter.

S&F in repair lathe of thickness 1.25mm thick for rolling shtters

S&F in repair shaft for rolling shtters

S&F in repair gear assembly suitable for rolling shutters of any size fixed in position all as specified.

S&F in repair mild steel section of any size and section including necessary cutting & drilling holes for rolling shutter and collapseable shutter as required.

S&F in repair mild steel solid rollers of any dia or section complete all as specified

M&L MS work as in pintel hooks, brackets etc incl necessary sutting welding, drilling holes confirming to Fe-290 complete all as specified.

S&F Repair 1.25mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, but gear operated type with bevel gear box and crank handle complete all as specified and directed.

Supply only Safety lever locks mild steel with 4 levers for rolling shutters

M&L for Preparation of new or previously untreated surfaces of steel or iron surfaces exceeding 10cm width or girth and applying two coats of aluminium paint over one coat of red oxide primer.Complete all as specified and as directed by Engineer-In-Charge.

M & L For easing of door shutter , for easy closing /opening tightning of hinges or changing the position or hinges adjestment of handles , knobs with new screw etc including other small adjestment complete all as specified and as directed.

M & L For easing of window shutter , kitchen Kupboards Shutter, show case shutter , drawer including fixing of screw for easy closing /opening tightning of piano hinges or changing th eposition or hinges adjestment of handles , knobs with new screw etc including other small adjestment complete all as specified and as directed.

Fixing only in repairs butt hinges with new screw of any size & any location complete all as specified and as directed .

S & F in repairs stainless steel railing work as Gde 304 ss in railing for Swimming pool ladder/grab bar including all fittings and fixing complete all as specified and as directed.

S&F Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge (Make-Rajashri/Sintex/ Accura)

S & F 100 mm Heavy duty Aluminium powder coated butt hinges as approved as per sample compete all as specified as directed by Engineer -in -charge

S & F 150 mm Heavy duty Aluminium powder coated tower bolt as approved as per sample compete all as specified as directed by Engineer -in -charge

S & F 150 mm Heavy duty Aluminium powder coated Handle as approved as per sample compete all as specified as directed by Engineer -in -charge

S&F Steel windows with box type shutter including projecting type hinges with steel handles or steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handles or steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed.

S&F Steel windows or ventilators with top hungs shutter , including hinges , steel peg stay , complete all as specified and as directed.

S & F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets guard and railing 60cm long complete all as specified and as directed.

Labour only for opening of air locks in toilets /baths and kitchen water pipe line but excluding fittings complete all as specified and as directed by Engineer-In-Charge

M&L for repairs to sunken floor slab with the following specifications:- (a) Demolition of PCC and taking out old brick bat fillihng and roughening surfaces of old concrete floor and wall by picking, sweeping clean and washing down with water to remove dust etc. (b) PCC 1:2:4,type B-0, using 12.5mm graded stone aggregate averaging 50mm thick as in sunken floor,with proper slope towards GI spout. The dia of GI Spuot pipe shall be 50mm Medium grade. The minimum length of Spout shall be 500mm and if any spout comes above chajja than the length of the spout shall be more than Chajja projection. Ends of Spout shall be tippered and any cutting through brick/ RCC structure shall be done by the Contractor rates are deemed to be included of this aspects. (c) providing 15mm thick cement plaster in cement mortar 1:3 mixed with water proofing compound @ 3% by weight of cement over bottom and vertical surfaces finishing the surface even and smooth without using extra cement. (d) Damp proof course on horizontal / Vertical surfaces with preparation & applying one coat of self priming (33% dilution) and two coats of undiluted material @ 10.67 lts per 10 sqm of Make : smart care Damp proof of M/s asian paint or equivelent for water proofing compound. (e) Graded Brick bats filling under sunken floor. (f) PCC 1:3:6,type C-1,using 20mm graded stone aggregate 75mm thick, over brick bats filling as in subbase to receive tiles. Note:- (i) For payment purpose only floor area shall be measured. (ii) After Coating of Water proofing compound ponding test shall be carried out by filling the sunken surface with water for 72 Hrs and get approved by Engr-in-Charge if any leakage/ seepage noticed the Contractor will re do the whole process without any extra payment.

All as item No. 76 but area not exc 0.36 Sqm as in Kitchen for trap portion. The trap shall be paid extra in below items.

M & L for coloured Non skid ceramic tiles 7 to 8 mm thick of colour patteren as approved and as per manufacturers catalouge (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in floor etc over 15mm thick screed bed with cement mortar 1:6 and set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed by Engr in charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M & L for coloured glazed ceramic tiles 300 mm x450 mm & 7 mm thick on vertical surfaces of colour patteren as approved and as per manufacturers catalouge such as skirting, dados etc, set and jointed in neat cement slurry over and including 10 mm thick bedding layer/ backing coat in CM 1:4 complete and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-In-Charge. Note : Skirting shall be provided to match with colour and size of floor tiles provided in rooms.

Taking down steel tubing of 15 mm dia bore and connections from walls and cellings or laid in floor including cleaning for refixing in same position (walls , ceiling, floors etc).

All as item No. 81 but 20 mm bore.

S & F tubes medium grade galvanized with all fitting and fixed complete to wall and ceiling or laid in floor (bore of Pipe 15mm ) complete all as specified and as directed ( Make: Jindal, TATA, RAVINDRA

Supplying and laying of CPVC 16 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F tubes medium grade galvanized with all fitting and fixed complete to wall and ceiling or laid in floor (bore of Pipe 15mm ) complete all as specified and as directed ( Make: Jindal, TATA, RAVINDRA

Supplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. Note : The rate includes for chase cutting of Concealed for all the pipes shall be got tested before providing by Pressure testing machine and got approved and any leakage seepage observed , the conctractor shall be redo the same without any extra payment.

Supplying and laying of 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. Note : The rate includes for chase cutting of Concealed for all the pipes shall be got tested before providing by Pressure testing machine and got approved and any leakage seepage observed , the conctractor shall be redo the same without any extra payment.

S & F in repairs vitreous china wash down water closet pedestal pattern (EWC) white excluding flushing cistern & Incl white seat cover of same make closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and flush pipe.Complete all as specified and directed by Engineer-in-charge.

S&F in repairs vitreous china squatting pan Orissa pattern size 580x440mm white with CI P or S trap front or back inlet and integral foot rests including connection to trap to flush pipe etc complete including for making good to floor etc Complete all as specified and as directed by Engineer-In-Charge.Make : Parryware/Hindware/CERA

S&F in repairs 10 litres capacity PVC Valveless symphonic action type flushing cistern high / low level white complete with inlet , ball valve float and handle including brackets and telescopic down pipes and jointing with WC complete complete all as specified and as directed by Engineer-In-Charge. Make Parryware (Slim line)/Hindware (1st Quality)/Commander (waterbird)

S & F in repairs plastic seat cover white closed pattern with flat bottom andcover with CP hinges for EWC complete all as specified and as directed Make:- Commander, Cera, Parryware

S & F in repairs plastic seat cover white Anglo indian Pattern with flat bottom andcover with CP hinges for EWC complete all as specified and as directed Make:- Commander, Cera, Parryware

S & F in repair PVC hinges for Ewc seat Cover complete.

S & F in repair of float valve for 10ltr capacity flushing cistern

S&F in Repair PVC connection 15mm size with PTMT nuts, of length 600mm Complete all as specified and as directed by Engineer-In-Charge.

S&F in Repair PVC connection 15mm size with PTMT nuts, of length 450mm Complete all as specified and as directed by Engineer-In-Charge.

S & F in Repair Pillar taps , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure fancy type of 15 mm bore size with or without lettered Hot or Coldwith long screwed shanks and flynuts , screwed for iron pipe and fixed of Prayag /Saiko/ Parko Complete all as specified and as directed by Engineer-In-Charge.

S&F in Repair Cast copper alloy CP angle valve type stop cock with flange suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head confirming to Prayag /Saiko/ Parko Complete all as specified and as directed by Engineer-In-Charge.

S&F in Repair bib tap long body foam flow with flange of bore size 15mm, cast copper alloy, chromium plated, fancy type, with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferrule of Prayag /Saiko/ Parko Complete all as specified and as directed by Engineer-In-Charge.

S & F in repairs 2 way Bib cock for health faucet with 2 way bib cock of Prayag /Saiko/ Parko. complete all as specified and directed by Engineer in charge

S & F as in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all as specified and as directed.

S & F in repairs PVC health faucet Special (1.5 mtr tube) with hook for EWC Make ;- Prayag or Equivalent

S & F in repairs Holder for health Faucet with Screw equivalent complete all as specified and as directed.

S & F in repairs health Faucet tube 1.5 mtr with hook for EWC complete all as specified and as directed.

S & F in repairs health Faucet Head for EWC complete all as specified and as directed.

S&F in Repair Cast copper alloy CP Concealed stop cock with flange suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head confirming to Prayag /Saiko/ Parko Complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing in repairs 100 mm dia CP brass shower rose swivel type with extension CP rod 15mm dia and 300mm long with connecting rod suitable for 15mm bore pipe .Complete all as specified and directed by Engineer-in-charge.

S & F in repair indian Rubber washer for item catered as in item no 107

S & F in Repair brass sprindle for Cp water taps of variouse make 15mm dia

S & F in Repair brass sprindle for Cp angle cock/ stop cock of variouse make 15mm dia

S & F in Repair brass sprindle for Cp Pillar tap of variouse make 15mm dia

S & F in repairs bib tap PVC any colour high pressure, screwed down high oressure as specified for 15mm boree complete all as specifed and as directed .Make :- PRAYAG

S & F in repairs Pillar Tap PVC any colour high pressure, screwed down high oressure as specified for 15mm boree complete all as specifed and as directed .Make :- PRAYAG

S & F in repairs cast iron floor trap with CP grating weight of grating not less than 35 gram joint to waste pipe in run lead joint dia of outlet 75mm of floor, trap deep water seal and of heavy weight coated with tar/ black bitumen paint, complete all as specified and as directed by engr-in -charge .

S & F in Repair viterous china wash hand basin of size 550 x 400 mm, white colour flat back excluding taps, chain and plug and porcelean stopper but including brackets and CP waste fitting and 32 mm PVC waste pipe . complete all as specified and as directed by Engineer-In-Charge

All as per item No 115 above but angle back 400mmx400mm

S&F in Repair Brass chromium plated tubular towel rail 20mm dia 60cm long with and including flanges complete all as specified and as directed by Engineer-In-Charge

S & F in repairs soap dish stainless steel as approved by GE complete all as specified and as directed by Engineer-In-Charge.

S & F in repair Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers; including waste coupling with pipe, bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460mm bowl size 410mmx330mmx160mm

S & F in repairs Stainless steel sink , 1.00 mm thick for kitchen or laboratory , with plug , waste pipe , washer, including cantiliver cast iron brackets , connection union etc overall size 495 x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including fixing plugs , bedding urinal against wall in cement mortar (1:2) etc. including CP Waste fitting and PVC waste pipe.Completed all as specified and directed by Engineer-in-charge.

S&F in repairs 32 mm bore Waste fittings/ cupling, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S&F in repairs 40 mm bore Waste fittings/ cupling, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S&F in repairs 32/40 mm spring type PVC waste pipe fixed toWHB & Sink etc complete all as specified and directed ( Note minimum length of each pipe should not be less than 0.70RM)

Supply and fixing Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 of 40 mm dia bore for wash hand basin Complete all as specified and directed by Engineer-in-charge.Make:Prayag

Demolition and breaking up drain pipes (Salt glazed ware , AC or RCC or PVC Pipes) of any dia including all fittings any size all as specified & as directed by Engr-in-Charge.

S& F PVC (SWR) pipes 110mm dia single, socketed in any length ,with rubber ring joints fixed to walls with MS clamps all as directed by Engr in charge. (Work will be scattered in varius bldg in Domestic and technical area.

S&F PVC (SWR) bends 110mm dia

S&F PVC (SWR) branch piece, single (single Y) equal or unequal

S&F PVC (SWR) branch piece, double (double Y) equal or unequal

S& F PVC (SWR) pipes 75mm dia single, socketed in any length ,with rubber ring joints fixed to walls with MS clamps all as directed by Engr in charge. (Work will be scattered in varius bldg in Domestic and technical area.

S&F PVC (SWR) bends 75mm dia

S&F PVC (SWR) branch piece, single (single Y) equal or unequal

S&F PVC (SWR) branch piece, double (double Y) equal or unequal

Cleaning and removing all scale and dirt, etc, from tanks and from mouth of circulating pipes including disconnecting existing tanks and refixing in position fter cleaning complete including writing date of cleaning with approved quality synthetic enamel paint complete all as specified and directed (a) tank of capacity Exc 250 and n. exc 500 ltrs.

All as per item No 135 but with tank of capacity Exc 500 and n. exc 1000 ltrs

Dismantling existing water tanks of capacity 500 ltrs lowering from its position and removal to store. complete all as specified and directed.

Dismantling existing water tanks of capacity 1000 ltrs lowering from its position and removal to store. complete all as specified and directed.

S&F rotantional moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed.

S&F rotantional moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed.

Supply and fixing in repairs 15 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed in tank which situated up to 50 m height buildingincluding necessary ladder for climbing if required .complete all as specified and as directed by Engineer-in-Charge. Make:Prayag

All as per item No.141 above but 20 mm bore complete all as specified. Make:Prayag

S & F in repairs Grating of 125 mm dia stainless steel with waste hole complete

M & L 75mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) Complete all as specified and as directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for

M&L brushing cement slurry @ 3.00 Kg per Sqm on existing concrete surface.

M&L 25mm thick PCC 1:2:4 type B0( 12.50mm graged aggregate) finished even and fair

M & L for coloured Non skid ceramic tiles 7 to 8 mm thick of colour patteren as approved and as per manufacturers catalouge (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in floor etc over 15mm thick screed bed with cement mortar 1:6 and set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed by Engr in charge

M&L Machine cut cudappah stone slab 20mm to 25mm thick over and including 15mm thick cement screed bed in CM 1;6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing Complete all as specified and as directed by Engineer-In-Charge.

M&L for Granite (of any colour or any grains as approved) work with 16 to 18mm thick table rubbed and polished as in steps jambs , pillers , window cills, cooking platform and similar works including pointing in with cement using 1:2 using marbel dust and admixture of pigments to match with the shade of granite over and including 15mm thick screed bad in CM 1:6 for laying granite all as specified and directed including taking down / dismanteling of existing plaster/ stone of any type. Note : Grinate shall be best quality and shall be provided one piece and width minimum 70mm in jambs except of cooking platform whicl shall be of full width as per site including full moulding of exposed edges with polishing. The back surface of grinate shll be made rough by sprinkeling small pebbles using adehesive for bonding with bedding layer.

M&L for drilling holes for pipes etc in cadappa/granite including RCC slab nexc 25mm dia and n exc 150mm depth

Demolition of reinforced cement concrete in any position like roofs, floors other than ground floors , beam , staircases , landings , chajjas,projections, facias and similar suspended work or reinforcement cut as required to facilate demolition for portions ordered to be dismanttled up to 15 m height including forwork and necessary saftey measuresor as directed by Engr in charge

M&L for reinforced cement concrete type B1 (1;2;4) nominal mix using 20 mm graded broken stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, shelves and the like.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed by Engineer-In-Charge.

S&F mild steel TMT bar of 10 mm dia and over cut to length bent to shape required including cranking and binding with mild steel annealed wire not less than 0.9 mm dia.

Taking down cement plastering on brick or stone walls, etc.including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and dorected.

Rendering 10 mm thick in cement mortar 1:6 on brick work or concrete surfacces and stone masonary and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 5 mm thick on uneven faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and fair without using extra cement complete all as specified and directed.

M&L for preparation new plastered surfaces of walls and applying two coat of oil bound distemper washable complete all as specified.

M&L for preparing of new plastered sufarce of ceiling and applying three coats of white wash all as specified and directed.

M &L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in Brick /stone wall.

S & F mild steel spring 250mm for door, ordinary rat tail rod pattern springs, including roller and roller plate including welding as required for steel frame compete all as specified as directed by Engineer -in -charge ( work shall be carried out in MD Qtrs/ OTM accns in different locations of Domestic/ Technical area as per site requirements upto 4 storieyed building)

shubham Enterprises

Apachi Systems

M/S PRAMOD SURESHCHANDRA AHER

Santhi Enterprises

M/s.TIRUPATI BUILDERS

MATOSHREE ENTERPRISES