Certain repair to steel furniture and painting and polishing of certain wooden/steel furniture under GE (N) Bikaner

Amount

M&L for removing old unserviceable top of items mentioned below and S&F new top made out of 18/19 mm thick Ext grade Prelaminated MDF board of approved shade Make : Action Tesa/Novapan/Green panel Max (ISI Marked) duly post-formed (PFT) including tightening/Welding of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as specified and directed.

Table 900x600 With/Without Drawer (FD-1007/FD-1008)

Table Office Clerk steel (FD-84(M)/FD-381/FD-1004)

Teapoy Verandah (FD-35/FD-208/FD-383)

Table office officer steel (FD-1003)

Table 900x900 x760mm steel (FD-1009)

Table Conference / Library (FD-1001)

Teapoy Verandah (FD/E6/MAP/17)

Table Dinning OR's (FD-165M)

TABLE OFFICE CLERK STEEL (FD-381/FD-1004)

S&F New drawers with appropriate size of sheet as existing, with locking device as per drg and as directed.

S&F New drawers with appropriate size of sheet as existing as per drg and as directed.

TABLE OFFICE OFFICER STEEL (FD-1002)

S&F New drawers with appropriate size of sheet as existing, with locking device as per drg and as directed.

S&F New drawers with appropriate size of sheet as existing, as per drg and as directed.

Dismentling of existing unserviceable Shutter of Table and S&F new shutter fitted with locking device & MS butt hinges as per drg and as directed.

CHAIR VERANDAH (FD-256)

Removing of existing unserviceable old cane and recaning of chair Verandah with new plastic white cane of 4.0 mm wide half round cane.

M&L with gas welding to broken components of steel frame so as to bring the whole item in serviceable condition, welding portion should be smoothed by grinder as directed.

M&L for painting of chair steel frame with two coat of synthethic enamel paint of approved shade Make : Berger/Asian paints after removing the rubber shoes and complete removal of existing coat of paint, including preparation of old surface by mild grinding and applying a primer coat of red oxide all as directed.

S&F PVC Shoes as directed by Engr-in-Charge.

ALMIRAH MED STEEL (FD-1032/FD-87M)

Dismentling of unserviceable bottom legs, S&F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxide primer be of 1mm thick PBI sheet by welding and finishing with mild grinding and as directed.

S&F shelves made of 1mm thick MS sheet duly painted shape and size as specified on drg.

Dismentling of unserviceable locking assembly with complete mechanism and S&F new MS locking assemly with base plate (Complete mechanism) with upper and lower bars with brass lock as shown in drg or as directed.

Denting/bending/welding, repairs of damaged parts, fixing loose shelves, scraping and complete removal of existing coat of paints filling, finishing and painting of Almirah Medium steel with two coats of synthetic enamel paint in dual shade of approved color (Make : Berger/ Asian Paint) with spray after applying a coat of red oxide primer and as directed.

ALMIRAH LARGE STEEL WITH SHELVES (FD-1031)

Dismentling of unserviceable bottom legs, S&F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxide primer be of 1 mm thick PBI sheet by welding and finishing with mild griding and as directed.

S&F shelves made of 1 mm thick MS sheet duly painted shape and size all as specified on drg.

Dismentling of unserviceable locking assembly with complete mechanism and S&F new MS locking assemly with base plate (Complete mechanism) with upper and lower bars with brass lock as shown in drg or as directed.

Denting/bending/welding, repairs of damaged parts, fixing loose shelves, scraping and complete removal of existing coat of paints filling, finishing and painting of Almirah Large steel with two coats of synthetic enamel paint in dual shade of approved color (Make : Berger/ Asian Paint) with spray after applying a coat of red oxide primer and as directed.

LOCKER STEEL {FD-1029/FD-54(M)}

M&L for dismentling of existing unserviceable Handles and S&F new handles CP steel 100 mm long with suitable SS screws of approved quality complete all as specified and directed.

M&L for dismentling of existing unserviceable Hasp and Stapple and S&F new Hasp & staple of size 75x40mm 3mm thick stainless steel with suitable Nut&Bolt complete all as specified and directed.

M&L for dismentling of existing unserviceable legs and S&F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxide primer be of 1mm thick PBI sheet by welding and finishing with mild grinding as per drg and as directed.

Denting/bending/welding, repairs of damaged parts, fixing loose shelves and complete removal of existing coat of paints filling, finishing and painting of locker steel with two coats of synthetic enamel paint in dual shade as approved (Make: Berger/ Asian Paint) with spray after applying coat of red oxide primer as directed.

M&L for dismentling of of existing unserviceable MS Butt Hinges & S&F new MS Butt Hinges with suitable MS Screws as per specification and as per drg. 75 mm long of approved pattern complete for serial item No. 5.00, 6.00 & 7.00 complete all as specified and directed.

Dismentling of existing unserviceable CP handles and S&F new CP handles of approved quality for serial item No. 5.00 & 6.00 as specified and approved.

Dismentling of unserviceable locks of Almirah Med/Large with shelves and S&F new Brass locks of approved make as specified and shown in drg.

S&F of cleats shall be made of 2 mm thick MS Steel made to shape and fix in the Almirah to support the shelves for serial items No. 5.00 & 6.00 complete as directed

Dismentling of unserviceable bushes of locking asembly of serial item No. 5.00 & 6.00 and S&F new MS bushes of locking assemly as directed.

CHAIR CBA STEEL W/ARMS (FD-75)

Labour for removing the existing worn out/ unserviceable seat of chair CBA steel and S & F new seat frame of size 460 x 420 mm made from commercial plywood 12 mm thick and 50 mm thick 40 D foam cushion, duly covered with cloth /rexine of approved quality and shade, duly stitched complete all as directed.

All as per serial item No. 13.01 here-in-before but for Back of Chair CBA Steel of size 460x380mm

M&L for welding with 25x3mm MS flat iron 510 mm long with holes to fix screws to seat/back frame for fixing sheet/back frame including screws complete all as specified and as directed for Chair CBA Steel {FD-75(M)}

S&F new PVC Caps.

S&F new IInd class hard wood/PVC arms as per sample.

S&F wooden seats of IInd class hard wood duly caned (Godrej pattern) and polished for chair CBA Steel

S&F wooden back of IInd class hard wood duly caned (Godrej pattern) and polished for chair CBA Steel

CHAIR CB STEEL W/O ARMS (FD-75)

S&F wooden seats of IInd class hard wood duly caned (Godrej pattern) and polished for chair CB steel.

S&F wooden back of IInd class hard wood duly caned (Godrej pattern) and polished for chair CB steel.

S&F MS flat iron 25x3 mm duly welded to seat/Back frame of chair CB/CBA steel for fixing seat/back frame including screws complete all as specified and as directed by the Engineer-in-Charge.

S&F new PVC Caps.

TABLE BED SIDE {FD/E6/MAP/15 (R)}

Removing of unserviceable sides in any position, S&F new sides made out of 18/19 mm thick exterior grade MDF board of approved shade Make : Action Tesa/Novapan/Green Pannel Max (ISI Marked) including tightening of loose joints of existing frame before fixing the sides with steel corners and screws shape and size all as specified on drg and as directed by Engr-in-Charge.

All as per serial item No. 15.01 here-in-before but for Back of Table Bed side.

All as per serial item No. 15.01 here-in-before but for top of Table Bed side.

S&F new top drawers made of MDF prelaminted board of exterior grade with SS Handle.

S&F new bottom drawers made of MDF prelaminted board of exterior grade with SS Handle.

Removing of unserviceable channels in any position, S&F new steel channels with screws (ISI Marked).

S&F new SS handles for drawers of approved shape and size as directed by Engr-in-Charge.

S&F hard PVC shoes of best quality as approved by Engr-in-Charge.

CHAIR SCHOOL WITH HANDBOARD (FD/E6/MAP/05)

Removing of existing unserviceable complete seat of chair and S&F new PVC seat frame of approved brand and color with suitable screws including tightening of loose joints of existing frame before fixing the seat with steel frame as shown in drg as directed.

Removing of unserviceable writing hand board in any position, S&F new hand board with suitable size of screws with PVC liping made out of 18/19 mm thick exterior grade MDF prelaminted board of approved shade Make : Action Tesa/Novapan/Green Pannel Max (ISI Marked) shape and size all as specified on drg and as directed.

S&F the bottom tray alongwith clips duly tightened with suitable screws/nuts bolts to the frame as directed.

S&F hard PVC shoes of best quality as approved by Engr-in-Charge.

FORM WITHOUT BACK OF SIZE 1525MM/1900MM (FD-77 M/1027)

S & F in replacement of unserviceable seat with new seat of size 1525/1900 mm x 255 mm made out of 25 mm thick wooden planks of 1st Class hard wood (Teak Wood) with nut, bolt and washer and including polishing to wooden surface with french polish high gloss.

FORM WITH BACK OF SIZE 1800MM (FD-78M)

S&F in replacement of unserviceable seat with new seat of size 1800mm x 255mm made out of 25 mm thick wooden planks of 1st Class hard wood (Teak Wood) with nut, bolt and washer and including polishing to wooden surface with french polish high gloss.

S&F in replacement of unserviceable back with new back of size 1800mmx150mm made out of 25 mm thick wooden planks of 1st Class hard wood (Teak Wood) with nut, bolt and washer and including polishing to wooden surface with french polish high gloss.

CHAIR CBA SPL WITH HANDREST (FD-120(M) Chair CBA Spl with hand rest

S&F wooden seat frame of Ist class hard wood (Teak Wood) duly caned (Godrej pattern) and polished for chair CBA Spl with hand rest all as specified on drg and as directed by Engr-in-Charge.

S&F wooden back frame of Ist class hard wood (Teak Wood) duly caned (Godrej pattern) and polished for chair CBA Spl with hand rest all as specified on drg and as directed by Engr-in-Charge.

Removing of unserviceable hand rest in any position, S&F new hand rest made out of 12mm thick Teakwood plank with suitable size of screws all as specified on drg and as directed by Engr-in-Charge.

Receptacle with bucket (FD-226/1044)

Removing old/Unserviceable parts of receptacle in any position and S&F new components complete all as specified (including cost of reveting, nut & bolts, and pins etc shall be deemed to be included in quoted rates) and as directed by Engr-in-Charge.

S & F in replacement with new GI buckets of made out of 1 mm thick PGI sheet size of 300 mm high and 10 mm round bar provided for handle complete all as specified as directed by the Engineer-in-Charge.

Cutting and removing old unserviceable legs and frame parts of Table 900x600mm With/ Without Drawer (FD-1007/FD-1008)/Table Office Clerk steel (FD-84(M)/FD-381/FD-1004)/ Table 900x900x760mm Steel (FD-1009)/ Table office officer steel (FD-1003)/ Table Dinning OR's (FD-165M)/ Form with & without back and S&F the new legs/frame parts made of MS 25 mm square pipe having 1.6 mm wall thickness by welding and including minor repair as per existing complete all as specified as directed. Note:- (i) Cost of minor repair like welding to frame if required etc shall deemed to be included in the quoted rates. (ii) Cost of nuts, bolts and washers if required for fixing shall deemed to be included in the quoted rate. (iii) All work to be carriedout as shown on drawing and as directed by Engineer-in-Charge.

S&F in replacement of unserviceable PVC shoe with new PVC shoe of best quality of serial item No. 1.00, 2.00, 3.00, 17.00 & 18.00 here-in-before complete all as specified and as directed by the Engineer-in-Charge .

Denting/ bending/ welding, repairs of damaged parts, fixing loose shelves/Components, scraping and complete removal of existing coat of paints, filling with putty to obtain even surfaces, finishing and painting with two coats of synthetic enamel paint of approved shade (Make : Berger/ Asian Paint) with spray after applying a coat of red oxide primer all as specified and directed by Engr-in-Charge for the following : (Note : Painting including at site)

Almirah Medium steel with shelves (FD-67/FD-243/FD-350/FD-1032)

Almirah large steel with shelves (FD-1031)

Almirah large steel 1/2Hx1/2 shelves (FD-1033/FD/E6/MAP/18)

Book case Steel w/glass shutters FD-90(M)/FD-1028

Locker Steel FD-1029/FD-54(M)

Chair CBA steel with arms (FD-75)

Chair CB steel without arms (FD-75)

Ladder (FD-44M)

Table 900x900 x760 mm steel (FD-1009)

Table 900 x 600 x 760 mm with drawer (FD-1008)

Table 900 x 600 x 760 mm w/o drawer (FD-1007)

Rack steel adjustable 6 tier of various sizes (FD-129(M)/FD-1038)

Table office clerk steel (FD-84(M)/FD-381/FD-1004)

Table office officer steel (FD-1003)

Chair school with hand board (FD/E6/MAP/05)

Teapoy Verandah (FD-35/FD-208/FD-383)

Form with Back of Size 1800 mm (FD-78M)

Form without back size of 1525/1900 mm

Table Conference / Library (FD-1001)

Teapoy Verandah (FD/E6/MAP/17)

Table Dinning OR's (FD-165M)

NAVEEN TRADERS

SMS Enterprises

JAI TRADERS(INDIA)

O.K. ENTERPRISES