SPECIAL REPAIRS TO CHILDREN PARK OF B AND C TYPE MARRIED ACCN AT DRDO TOWNSHIP KANCHANBAGH , HYDERABAD

Amount

Surface dressing of the ground including removing, vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil all complete all as specified.

Providing and laying cement concrete in retaining walls, return walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, excluding the cost of centering shuttering and finishing :- (i) 1:2:4 (1 cement : 2 coarse sand ( zone -III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources ) all complete all as specified.

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 Sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m in Ordinary rock, all complete all as specified and directed.

M&L for PCC 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm in sub base nominal size derived from natural sources)

Demolishing brick work in cement mortar manually / by mechanical means including stacking of serviceable materials and disposal of unserviceable materials within 50 meter leads as per direction of Engr -in- Charge

M&L Brick work with common burnt clay F.P.S ( non modular ) bricks of class designation 7.5 in superstructure above plinth level all shapes and sizes in cement mortar 1:4 all complete all as specified and directed.

M&L rendering 15mm thick in cement mortar C:M 1:4 on external wall surfaces , finished even and smooth, all complete all as specified and directed.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade all complete all as specified and directed.

Providing and fixing steel E165 (Fe 290) confirming to IS 2062 -2006 work in gratings, frames, guard bars, ladders, railing, brackets, purlin, gates and similar works welded in built up sections / frames work, including cutting, hoisting, fixing in position and applying priming coat of approved steel primer as required

M&L chequerred precast cement concrete tiles 22 mm thick any size in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, including 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Light shade pigment using white cement

M&L painting on new steel surface ( two or more coats ) including a coat of approved steel primer ( red oxide primer) with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade

filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. all complete all as specified and as directed.

M&L finishing wall New work ( Two or more coats applied @ 1.43 liter/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 liter / 10 Sqm with 100 % premium acrylic emulsion paint having VOC less than 50 gm/ liter and UV resistance as per IS 15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade ( Company Depot tinted ) with silicon additives all complete all as specified and as directed.

S&F RCC Garden Chair Bench (Heavy) WB (Machine Made with Glassy Finishing) of size 1500(L),500(W),480(H) in mm approved colour complete all as directed.

S&F Mild steel screw bolts, nuts and washers of 5 to 10mm neck dia(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends not exceeding 5cm long, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as directed.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge) all complete all as specified and directed.

M&L Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete above plinth level :- (i) Thermo - Mechanically Treated bars of grade Fe- 500D or more all complete all as specified and directed.

M&L Steel reinforcement for RCC work ready to use "cut and bend" for stirrups rebars of approved make from factory / workshop to construction site including placing in position and binding all complete above plinth level (i) Thermo / Mechanically Treated bars of grade Fe- 500D or more all complete all as specified and directed.

Providing and laying in position ready mixed or site batched M-25 grade cement concrete for reinforced cement concrete work using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolanna / Ordinary Portland / Portland slag cement admixtures in recommended proportions as per IS : 9103 to accelerate / retard setting of concrete , to improve durability and workability without impairing strength including pumping of concrete to site of laying, curing, carriage for all leads, but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engr-in- Charge for the following graded or concrete all works up to plinth level ,all complete all as specified and directed. (i) Concrete of M-25 grade with minimum cement content of 330 Kg/ Cum for footing and beam

Providing and laying in position ready mixed or site batched M-25 grade cement concrete for reinforced cement concrete work using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolanna / Ordinary Portland / Portland slag cement admixtures in recommended proportions as per IS : 9103 to accelerate / retard setting of concrete , to improve durability and workability without impairing strength including pumping of concrete to site of laying, curing, carriage for all leads, but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engr-in- Charge for the following graded or concrete all works above plinth level up to floor V level all complete all as specified and directed. (i) Concrete of M-25 grade with minimum cement content of 330 Kg/ Cum for column

M&L Centering and shuttering including strutting, propping etc and removal of form for (i) Foundations, fitting, bases of columns etc all complete all as specified and directed.

M&L Centering and shuttering including strutting, propping etc and removal of form for (iii) Columns, pillars, piers, Abutments, post and struts all complete all as specified and directed.

SRI SAI ENTERPRISES

M/S SARASWATHI CONSTRUCTIONS

S Anjan Reddy

Anjana corporation

Venkat Sai Enterprises

Ravi Enterprises

M/s ANUSHA ENTERPRISES