PERIODICAL SERVICES TO CERTAIN BUILDING AND INSTALLATION, SECURITY WALL AND REPAIR/MAINT TO JOINERY AND ALLIED WORK IN POCKET 9 (SAHARANPUR) UNDER GE ROORKEE

Amount

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and directed

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but n. exceeding 4 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified and directed

Taking down shutters of any description exc 1 sq. m and n. exc 2 sq. m each and refixing in same opening complete all as specified and directed Note: (i) All the joinery to be incorporated in work will be factory made. Contractor must share the supply order with GE and AGE office with in one week of receiving WO. (iii) Rates quoted above shall be inclusive of above points.

Dismantling of wrought Iron or mild steel work of any description not otherwise provided for such as wind ties, valley gutter, supports steel windows, door etc complete all as specified and directed.

M&L for resecuring or easing of door / window shutter n.exc 1.00 sq m in size without taking down and making operation in all respects complete all as specified and directed.

M&L for resecuring or easing of door / window shutter exc 1.00 and n.exc 2.00 sq m in size without taking down and making operation in all respects complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed

S & F pressed steel frame size 105x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc complete all as specified supplied and fixed.

S & F pressed steel frame size 125x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc complete all as specified supplied and fixed.

S &F factory made Flush shutters, solid core construction 30mm thick with block board core and plywood face panels, commercial type on both sides conforming to IS-2202(Part-I), 1983 complete all as specified and directed.

S&F 35 mm thick IInd class HW Factory Made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to complete all as specified and directed

S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat molded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame rails welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, and S&F in the frame at side as per specification and drawing complete all as specified and directed

S&F Factory Made steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed

S&F Factory Made steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe- 290 (Gde E- 165) complete all as specified and directed

M&L PCC(1:3:6) type C1 as in bed blocks for hold fast and back filling of pressed steel frame including necessary formwork complete all as specified and directed.

S&F mild steel flat iron as in hold fast clamps small articles conforming to FE 290 GDE -E- 165 complete all as specified and directed.

S&F 2 nd class hard wood small fittings such as door and window stops and cleats including all necessary articles not exceeding 200cm each complete all as specified and directed.

S&F 100mm size butt hinges cold rolled mild steel medium weight, ISI marked complete all as specified and directed.

S&F 140 mm long over all length of cover plate Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in with door complete all as specified and directed.

S&F for ISI Marked 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

S & F 150 mm size Aluminium anodised handles cast type, ISI marked complete all as specified and directed.

S&F in repair mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed

S&F mild steel sliding door bolts,300 mm long plate type, stove enameled black with bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple complete all as specified and directed.

S & F in repairs door closer hydraulically regulated designation no. 1 universal type, suitable for door shutters upto 700mm in widht and of weight between 61 to 80 Kg and fixed complete all as specified and directed

S&F in repair 200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames, glazed with putty or fixed with beads complete all as specified and directed

S&F 3mm thick sheet glass ordinary quality with oil putty in square n. exc. 0.5m in each pane complete all as specified and directed.

All as per item No 31 above but 3mm thick pin headed glass complete all as specified and directed.

S & F for galvanised mild steel wire mess 0.56mm nominal dia of wire and average width of appearature 1.18mm fixed with tinned tack or galvanised wire staples complete all as specified and directed.

S & F in repairs for galvanised mild steel wire mess 0.56mm nominal dia of wire and average width of appearature 1.18mm fixed with tinned tack or galvanised wire staples complete all as specified and directed.

S&F in repair Curtain rod Stainless steel fancy type curtain rod 20 mm dia incl Brackets and knobs complete all as specified and directed.

M&L for preparation of newly steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed

S&F in repair Vitreous China White Squatting Pan, ‘ORISSA’ Pattern of size 580x440 mm with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces complete all as specified and directed.

S&F in repairs PVC Flushing Cistern 10 LITRE capacity White, Low Level, Valve less, syphonic action type with Inlet, Ball Valve, Float and handle, a pair of Cast Iron Brackets including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar (1:3) complete all as specified and directed

Taking up or down Steel Tubing 15mm bore (dia) and connections complete all as specified and directed.

M&L 15mm dia bore steel tubing medium ISI marked grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Materials and labour, brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 meter mean radius with old size bricks built in CM 1:6, including demolition of old bricks in cement mortar complete all as specified & as directed.

Taking down old cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing downwith water, etc complete all as specified and directed

M&L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or on stone masonry surfaces and finished even and fair without using extra cement complete all as specified and directed

M&L Rendering 15 mm thick in CM 1:4 on fair faces of brick/concrete work surfaces finished even and fair complete all as specified and directed

M&L rendering 10 mm thick in CM 1:3 in ceiling finished even and smooth (without using extra cement) complete all as specified and directed.

M&L Three coat of white wash on wall including preparation of new plastered surfaces complete all as specified and directed

M&L for Coloured (Digital colour) Non skid ceramic joint free tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm and not exc 0.18 sqm, in floors etc. including 15 mm thick screed bed or bedding layer in CM 1:6 for laying floor finish, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. including 15 mm thick screed bed or bedding layer in CM (1:4) for laying floor finish, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Glazed ceramic Tiles 300x 200x 7 mm/ 350 x 250 x 7 mm / 450 x 350 x 7 mm Thick coloured as in vertical surfaces such as skirting dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the surface over 10 mm thick rendering in CM (1:4) complete all as specified and directed.

Taking down wall/ceiling boards Asbestos plywood of any thickness incluing cover fillets complete all as specified and directed

S&F powder coated ceiling grid system of grid size 600x600 mm fixed to walls with rawl plugs and screws and hang to roof members with 3 mm dia GI wire comprising main tee of size 38 mm x 24 mm x 0.30 mm , cross tee of size 28 mm x 24 mm x 0.40 mm with and incl 4 mm thick designer ceiling (E- board clasic) board/tiles for insulation and acoustic purpose 595 x 595 mm size fixed with steples on snap grid as in ceiling complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for precast machine pressed cement concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 60 mm thick M-35 grade, glossy type with grey cement and pigment laid dry over and including a layer of 25 mm thick sand cushioning complete all as specified and directed.

M&L PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in hardstanding, Plinth protection, path etc 75 mm thick finished even and smooth without using extra cement complete with Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed

M&L PCC (1:2:4) type B-1 using 20 mm grade stone aggregate as in coping, weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick machine cut,over 20 mm thick cement screed (1:6) base laid, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, dismentling of old tiles with cement mortar bedding and removing off the premises complete all as specified and directed.

Dismantling asbestos cement corrugated ,semi corrugated, ridge etc sheets in roof covering complete all as specified and directed.

Dismantling plain of steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed

Dismantling of timber scantling under 40 sqcm in purlins etc complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed

M&L Second class hard wood clean sawn in scantlings fixed in unframed work including two coat of creosote complete all as specified and directed

M&L Preparing surfaces of wood and wood based materials, new or old, any desciption and girth, not otherwise described and treated with two coat of creosote oil all as described complete all as specified and directed

S&F Rolled sections as in main beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed

Fixing only old AC, corrugated or semi corugated sheets in roof wall etc fixed with L-type or J-type or cranked hookbolts complete all as specified and as directed .

S&F for Pre-painted galvaume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F for Pre-painted galvaume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

M&L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundations, filling, mass concrete and sub base of floor etc complete all as specified and directed.

M&L 25 mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in levelling course complete all as specified and directed

M&L for machine cut kota stone slab flooring 20-25 mm thick over 20 mm thick cement screed (1:6) base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish, complete all as specifed and directed complete all as specified and directed

M&L for Kota stone slab 20-25 mm thick in skirting, etc over 15 mm thick cement screed (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish, complete all as specifed and directed.

S&F in repair ball valves of 20 mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed complete all as specified and directed

M&L for white color rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity of the tank 500 ltrs including GI tank nipple of size 20/15 mm dia including dismantling of old water tank complete all as specified and directed

M&L for preparation of old decorated surface of exterior wall by complete removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint using roller (Having three years of performance warranty) over a coat of exterior water based primer and a coat of 1mm thick wall care putty of same make all as specified and prescribed by manufacture of paint complete all as specified and directed . Note:- (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of exterior paint. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). after carrying out preparation of surface the same shall be got approved from GE before application of acrylic emulsion paint for each building. (v). The colour / shade will be all as approved by GE (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor

M&L for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of acrylic distemper using roller over one coat of 1mm thick wall care putty all as specified and prescribed by manufacturer of paint Ist Quality complete all as specified and directed. Note:- (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction before application of distemper. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building. (v). The colour / shade will be all as approved by GE

M&L for preparation of newly plastered surface of ceiling and applying two coat of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and apply two coat of cement base paint over a coat of alkali resistant wall primer, complete all as specified and directed.

M&L for preparation of newly plastered surface of external wall all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint using roller (Having three years of performance warranty) over a coat of exterior water based primer and a coat of 1mm thick wall care putty of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- 1. The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of emulsion paint. The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). after carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building. (v). The colour / shade will be all as approved by GE (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor complete all as specified and directed.

M&L for preparation of new surface of internal wall by reputed paint manufacturers and applying two coats of acrylic distemper using roller over one coat of 1mm thick wall care putty all as specified and prescribed by manufacturer of paint and all as directed at site by Engr-in-Charge . Note:- (i) The new surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction before application of distemper. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building. (v). The colour / shade will be all as approved by GE.

M&L for preparation of old plastered or unplastered surface of wall including cornices and pillasters etc and applying one coat of white wash on wall complete all as specified and directed

M&L for preparation of old plastered or unplastered surface of wall/boundary wall including cornices and pillasters etc and apply one coat of colour wash on wall surfcace complete all as specified and directed

M&L for preparation of old surface of ceiling plastered or unplastered including cornices and pillasters etc and applying one coat of white wash on ceiling complete all as specified and directed

M&L for preparation of old ceiling surface including cornices and pillasters etc and applying one coat of oil bound distember complete all as specified and directed

M&L for preparation of old surface of wall/boundary wall plastered including cornices and pillasters etc and applying one coat of cement base paint on wall complete all as specified and directed

M&L preparation of old painted surface of wall and applying one coat of oil bound distemper using roller all as complete all as specified and directed

M&L for preparation of old painted wooden surfaces of any descripton over 10cm width or girth and applying one coat of synthetic enamel paint First quality complete all as specified and directed

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint First quality complete all as specified and directed

S&F in repairs PVC waste pipe of any size and description complete all as specified and directed

S&F in repairs PVC connection 450mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed

S&F in repairs brass chromium plated bib tap for iron pipe of 15mm bore fancy type with crutch or butterfly handle, screwed down high pressure with flange complete all as specified and directed

Supply and fixing in repair Harrison rails, 20mm dia mild steel, anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and directed

S&F in repair colured steel curtain rod brackets and Brass knobs 35-40mm dia curtain rod complete all as specified and directed

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (110 mm bore) including dismantling of pipe complete all as specified and directed

M&L for Cleaning and removing all scale and dirt, etc, from PVC/RCC tanks capacity n.exc 500 Ltr and from mouths of circulating pipes incl cleaning with clean water complete all as specified and directed

M&L for obliterating old writing of any description, n exc 0.1 sqm with synthetic enamel paint to match with the existing work complete all as specified and directed

M&L for Writing letters or figures (in Block, Roman, Italic or Indian) n exc 30 cm hight with synthetic enamel paint to match existing work complete all as specified and directed

JBN CONSTRUCTION

G.H. INFRASTRUCTURE PRIVATE LIMITED

RAM PRAKASH AND ASSOCIATES