Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

Name of Package : Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922

Completion Period 6 Months

: Attachments : General guidelines for filling up the Attachments :Works Package - :

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922

1 Fill up only green shaded cells in the relevent attachments.

2 Attachments Bid Form for 1st Envelope, 4, 5, 5 (A), 6, 7, 8, 9, 10, 13 and Bid form and first Envelope are included here.

3 Attachment 1 Bid Security : Bid security is to be submitted/uploaded as per Cl.12 of ITB vol-I. Format attached under Vol-I.

4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format.

5 Attachment 11 Integrity Pact : To be submitted as per ITB Clause No. 9.3(m) and as per remarks in the Attach 11-IP.

5 Attachment 14: Scanned copies in respect of Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise etc. as applicable shall be uploaded,)

6 Attachment-16: Undertaking regarding submission of Original/ Hardcopy of the bid shall be uploaded.

Note : Enable the Active X Control & Macros. Also ensure to keep option of "Trust acess to VBA project object Model" cheched [√]. Ensure that you work on MS Excel 2007 or higher version.

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922 Properitary Firm 1

Partnership Firm 2 or More

Enter following details of the bidder Private Limited

Specify type of Bidder [Select from drop down menu] Others 2 or More

Name of the Bidder

Address of the Bidder

Other Partner-1

Address of other Partner - 1

Name of other Partner - 2 (More, if any)

Address of other Partner - 2 (More, if any)

Any Tower Parts Manufacturer proposed other than the bidder [Yes / No]

Proposed Tower Parts Manufacturer other than the bidder, if any [Maximum two nos.]

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922 Attachment-3(JV) Others 0

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

(Joint Venture Agreement and Power of Attorney for Joint Venture*)

Bidder’s Name and Address (the Bidder) : To :

General Manager(C&M)

Name : Power Grid Corporation of India Ltd.,

Address : SR-II,RHQ

Singanayakanahalli,Yelahanka

Bangalore-560064

The Joint Venture Agreement (as per the proforma attached at Annexure -I, Special Conditions of Contract, Vol.-I of the Bidding Documents) and Power of Attorney for Joint Venture (as per the proforma attached at Annexure -II, Special Conditions of Contract, Vol.-I of the Bidding Documents) are enclosed herewith.

Place : Designation : 6

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922 Attachment- 3 (QR)

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

(Qualifying Requirement Data)

Bidder’s Name and Address (the Bidder) : To :

General Manager(C&M)

Name: Power Grid Corporation of India Ltd.,

Address: SR-II,RHQ

Singanayakanahalli,Yelahanka

Bangalore-560064

In support of the Qualification Requirements (QR) for bidders, stipulated in Annexure-A (BDS) of the Section - III (BDS), Volume-I & additional information required as per ITB clause 9.3(c) of the Bidding Documents, we furnish herewith our QR data/details/documents etc., alongwith other information, as follows (The QR stipulations have been reproduced in italics for ready reference, however, in case of any discrepancy the QR as given in BDS shall prevail). The copies of Work completion certificates along with copy of work order/Agreements, Financial statements were self attested by Power of Attornery who is submitting this bid and the same is uploaded as First Envelope(Techno Commercial bid)

We have submitted bid as joint venture of following firms: Others

[For details regarding Qualification Requirements of a Joint Venture, please refer para 4.0 below.]

We are furnishing the following details/document in support of Qualifying requirement for the subject package.

A Attached copies of original documents of Sole Bidder in PDF format.

a) The constitution or legal status;

b) The principal place of business;

c) The place of incorporation (for bidders who are corporations); or the place of registration and the nationality of the Owners (for applicants who are partnerships or individually-owned firms).

a) Bidders submitting their Bids in Joint Venture may note that they have to furnish the JV Agreement and Power of Attorney of JV in line with the provisions of Bidding Document alongwith Bid Security and Integrity Pact in physical form before deadline for submission of hard copy of documents.

b) Attach written Power of Attorney of the Signatory of the Bid (For sole bidder / Lead Partner of the JV) and signatories of other partners of the JV (Signing the JV Agreement / Attorney of the JV)

d) We also uploaded Declaration form(as perAnnexure-C to BDS) jointly signed by Power of Attorney holder with Key Managerial Personnel(KMP) of the company i.e CEO/Manager Director/Company Secretary/Director/CFO/any other partner in case of Partnership firm declaring the QR data to true and correct

1.0 GENERAL INFORMATION

Bidder is required to provide general information as per the following format.

[Where the Bidder proposes to use named subcontractor(s) for critical components of the works or for work contents in excess of ten (10) percent of the bid price, the following information should also be supplied for the subcontractor(s)].

S No. Particulars

1 Name of the Firm

2 Legal Status Others

3 Head Office/ Registered Office Address

6 Contact Person

7 Place of Incorporation/ Registration

8 Year of Incorporation/ Registration

9 Nationality of

2.0 TECHNICAL REQUIREMENTS

2.1 Technical Experience

S.No Details of works executed Completion value Work order Ref Details work completion Certicate Whether uploaded

2.1.1 {Reference para I, Part -A of Annexure-A (BDS)}

The bidder’s experience should include the following:

i) The bidder should have executed similar works Similar nature of works for the package means Boundary wall/Buildings/Roads/ Drains/Site Levelling works of State or Central Govt /Institutional/Commercial/Residential establishment during last 7 years ending last day of month previous to the one in which NIT is being flotated be either of the following: (i) Three similar completed works costing not less than the amount equal to Rs.200.35 lakhs (ii) Two similar completed works costing not less than the amount equal to Rs.250.44 lakhs (iii) One similar completed work costing not less than the amount equal to Rs.400.70 lakhs

Note: In case of works executed under a contract that had been awarded on a Joint Venture, the experience of individual Joint Venture partner shall be considered limited TO the scope of that partner under the said contract

“IIn case the Bidder is a holding company, MAAT,Turnover in the preceeding financial year and LA referred to in clause 1.2 (i),(ii) & (iii) above shall be that of holding company only (i.e. excluding its subsidiary/group companies). In case Bidder is a subsidiary of a holding company, MAAT & LA referred to in clause 1.2 (i),(ii) & (iii) above shall be of that subsidiary company only (i.e. excluding its holding company). ”

[For Joint Venture bidders, the requirement to be met is stipulated under part-B under sub-heading Joint Venture Firms of Annexure-A (BDS)]

2.1.2 Using the following format, each Bidder (individual firms or partners of a joint venture) is requested to list the contracts of a nature similar to the proposed contract for which the Bidder wishes to qualify, undertaken during the last seven (7) years. The information is to be summarised for each such contract separately. (In case of Joint Venture bidder, the information/details pertaining to each partners of the joint venture are to be furnished).

[In support of above bidder should required to provide documentary evidence like copies of Final time extension/Performance Certificate/TOC/Completion Certificate , along with corresponding work/purchase order etc. Such documents need to be uploaded as attachment.]

Format for individual firm or for different Partner of a Joint Venture (JV):

Bidder’s Name : 0 0 0

Address : 0 0 0

Single Firm/Lead Partner/Other Partners of a JV : Other Partner of a JV Other Partners of a JV Other Partners of a JV

a Name of Contract Undertaken/Name of Transmission line/projects

b Contract Reference No. & Date of Award

c Name and Address of the Employer/Utility for whom the Contract was executed by the firm/Partner of a JV

d Scope of work executed under the above contract (as in Sl No (i) of 2.1.1) (Tick only whichever is/are applicable)

e Capacity in which the Contract was undertaken (Select One from Drop Down)

f If Contract was taken as JV partner scope of partner

g Date of Completion of Contract

h Details of documents furnished in the Bid, in support of the aforesaid data/ details/ information

3.0 Financial requirement

3.1 {Reference para II, Part -A of Annexure-A (BDS)}

For the purpose of this particular bid, bidders shall meet the following minimum criteria

a) (a) Minimum Average Annual Turnover (MAAT)* for best three financial years out of last five financial years commencing from Financial year 2009-10 of the bidder should not be less than INR 5.52 Crores.

Note: -Annual total income as incorporated in the profit & loss account except non-recurring income e.g. sale of fixed assets.

b) (b) Bidder shall have liquid assets (L.A.) or/and evidence of access to or availability of credit facilities of not less than INR 2.27 Crores. The Letter/ certificate regarding availability of credit facilities (along with utilization) from the bank should have been issued not more than three months prior to the date of NIT publication.

3.2 In support of its ‘Financial Position’, in line with the above, the Bidder must provide the relevant information, alongwith documentary evidence, in the following formats A & B:

Description For a joint venture of firms

For Lead Partner

Name of the Bidder

A Average Annual Turnover details:

Sl. No. Financial year

Average Annual Turnover for best Three Years out of last five financial years is

B Liquid Assets

Details of evidence of having Liquid assets (LA)

Details of evidence of access to or availability of credit facilities

Note: Bidder should get all the above parameters at clause 3.2 i.e. Financial Position duly certified by a Chartered Accountant and get a letter regarding availability of credit facilities and utilization statement from their banker and submit the same at the time of issuance of tender documents.

In case bidder is a holding company, MAAT & LA referred to in clause (a) & (b) above shall be that of holding company only (i.e., excluding its subsidiary/group companies). In case bidder is a subsidiary of a holding company, MAAT & LA referred to in clause (a) & (b) above shall be of that subsidiary company only (i.e., excluding its holding company).

[Further, for joint venture bidders, the requirement to be met is stipulated under part-B under sub-heading Joint Venture Firms of Annexure-A of (BDS).]

4.0 Joint Venture (JV) Firms

4.1 (a) a) In case a bid is submitted by a Joint Venture (JV) of two or more firms as partners, all the partners of Joint Venture shall meet jointly the Technical experience requirements. The figure of average annual turnover for each of the partners of the JV shall be added together to determine the JV’s compliance with the financial position criteria. However, for a JV to be qualified, the partner(s) of the JV must also meet the following minimum criteria:

i) The lead partner shall meet, not less than 40% of the financial position criteria given at Part-A above.

ii) Each of the other partner(s) shall meet, not less than 25% of the financial position criteria given at Part-A above.

(b) In case of Joint Venture, the following conditions shall also apply:

(i) In case of successful bid, the specified Form of Agreement shall be signed so as to be legally binding on all partners.

(ii) One of the partners shall be nominated as Lead Partner, and this authorization shall be evidenced by submitting a Power of Attorney signed by legally authorized signatories of all the partners.

(iii) The Lead Partner shall be authorized to incur liabilities and receive instructions for and on behalf of any and all partners of the Joint Venture, and the entire execution of the Contract, including payment, shall be done exclusively with the Lead Partner as per power conferred to him in the Power of Attorney.

(iv) All partners of the Joint Venture shall be liable jointly and severally for the execution of the Contract in accordance with the Contract terms, and a statement to this effect shall be included in the authorization mentioned under (ii) above as well as in the Bid Form and in the Contract Form (in case of a successful bid).

(v) Agreement entered into by the Joint Venture partners shall be submitted with the bid.

4.2 In accordance with the above, in case of JV bidders, it should be ensured that necessary details including those pertaining to each JV partner are furnished and the corresponding documents are attached. Further, the JV bidders should also ensure that other requirements are complied with. The lists of documents attached are to be indicated below:

(i) Doc Name KRA.pdf

(ii) F:\KRA.pdf

(iii) F:\KRA.pdf

5.0 The Bidder shall also furnish following documents/details with its bid. {Reference ITB clause 8.3 (c)}

5.1 The Bidder shall provide satisfactory evidence to POWERGRID, of their capability and adequacy of resources to carry out the Contract effectively. Accordingly, bids shall include the following documentary evidences / information

For Technical Experience

a) Completion certificate(s) detailing the scope of works / project completed covering the works as defined for “similar works” and showing the completed value, period of execution of the project completed

For Financial Status:

(a) Complete Annual report along with the Audited Statement of Accounts comprising of Balance Sheets and Profit & Loss Account of the company (of its own, if the company is holding or subsidiary) as applicable for 03 (Three) years immediately preceding the date of submission of the ‘Sealed Bid’

Note – I: IIn the event the Bidder is not able to furnish the information of its own (i.e. separate), being a subsidiary company and its accounts are being consolidated with its group/ holding/ parent company, the bidder should submit the audited balance sheets, income statements, other information pertaining to it only (not of its group / Holding / Parent Company) duly certified by any one of the authority [ (i) Statutory Auditor of the bidder /(ii) Company Secretary of the bidder or (iii) A certified Public Accountant] certifying that such information/ documents are based on the audited accounts as the case may be

Note – II: SSimilarly, if the bidder happens to be a Group / Holding / Parent Company, the Bidder should submit the above documents / information of its own (i.e. exclusive of its subsidiaries) duly certified by any one of the authority mentioned in Note-I above certifying that these information / documents are based on the audited accounts, as the case may be.

Litigation History: The bidder should provide a statement giving details / information on any litigation or arbitration raised or arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder may result in rejection of the Bid submitted

5.2 In case of JV bidders, the Bidder should accordingly also provide/ upload the Audited balance sheet and income statements for the last five years for all the Partners of JV.

6.0 LITIGATION HISTORY: Details of litigation History resulting from the contracts completed or under execution by the bidder over last five years.

Select whichever is applicable (If yes give the details as per below) : NO

Year Name of Client, cause of Litigation/Arbitration and matter of dispute Details of Contract & Date Judgment for or against the bidder Disputed Amount

We do not have any litigation History resulting from the contracts completed or under execution by us over last five years

6.0 Technical Credentials: List of work regarding past experience indicating the execution of similar work successfully, schedule time of completion and actual time of completion, the present status of projects in hand along with presently envisaged completion dates, qualification and experience of key personnel proposed for carrying out the subject work. List of available T & P and Manpower available with the bidder is also to be enclosed

6.1 Works in Hand

Details of Contract Value of Outstanding projects Tentative Completed date

6.2 List of Tools, Equipments & Plants

Sl. No. Name of Machine Nos

6.3 Qualification & Experience of key personal:

Sl. No. Designation Qualification Experience in Years

4 Additional Information

1 Details of works in hand(Use additional sheet if required and upload the same)

S.No Work Order Ref OrderValue ScheduledCompletion date Anticiated completiondate Details of work % works completed as on date of submissionof bid

2 Mximum value of similar works executed in anyone financial year during last 5 financial years in Rs.

3 Litigationhistory Whether uploaded

Satement giving details / information on any litigation or arbitration raised or arising out of contracts completed or under execution by it over the last five years. Yes

Date: -- Printed Name :

Place:. Designation :

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922 Attachment- 4

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

(COMMERCIAL DEVIATIONS)

Bidder’s Name and Address (the Bidder) : To :

General Manager(C&M)

Name : Power Grid Corporation of India Ltd.,

Address : SR-II,RHQ

Singanayakanahalli,Yelahanka

Bangalore-560064

Sub. : Commercial Deviations for Package.

The following are the Commercial deviations and variations from and exceptions to the specifications and documents for the subject package. These deviations and variations are exhaustive. Except for these deviations, the entire work shall be performed as per your specifications and documents.

Sl. No. Volume/ Clause Ref/ Page No. As Specified in the specification Commercial Deviation & Variations to the specifications

Date: -- Printed Name :

Place:. Designation :

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922

[Commercial Deviations Schedule]

Sl. No. Vol./ Clause Ref/ Page No. As Specified in the specification Commercial Deviation & Variations/Exceptions

Date: Printed Name :

Place:. Designation :

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922 Attachment- 5

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

(TECHNICAL DEVIATIONS)

Bidder’s Name and Address (the Bidder) : To :

General Manager(C&M)

Name : Power Grid Corporation of India Ltd.,

Address : SR-II,RHQ

Singanayakanahalli,Yelahanka

Bangalore-560064

Sub. : Technical Deviations for Package.

The following are the Technical deviations and variations from and exceptions to the specifications and documents for the subject package. These deviations and variations are exhaustive. Except for these deviations, the entire work shall be performed as per your specifications and documents.

Sl. No. Volume/ Clause Ref/ Page No. As Specified in the specification Technical Deviation & Variations to the specifications

Date: -- Printed Name :

Place:. Designation :

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922

[Commercial Deviations Schedule]

Sl. No. Vol./ Clause Ref/ Page No. As Specified in the specification Technical Deviation & Variations to the specifications

Date: Printed Name :

Place:. Designation :

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922 Attachment- 5(A)

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

[ Deviations on important/critical conditions along with their withdrawal price]

Bidder’s Name and Address (the Bidder) : To :

General Manager(C&M)

Name : Power Grid Corporation of India Ltd.,

Address : SR-II,RHQ

Singanayakanahalli,Yelahanka

Bangalore-560064

The following are the deviations/variations/exceptions to the provisions of important/ critical conditions stipulated in bid documents. We undertake to execute the contract in line with the provisions of Bidding Documents in respect of above said clauses in case POWERGRID agrees to pay- us the withdrawal price indicated below against each such deviations/ variations/ exceptions.

Sl. No. Volume of Bidding document Section Clause No./ Page No. Statement of Deviations/ Variations/ Exceptions Withdrawal Price (in INR)

Date: -- Printed Name :

Place:. Designation :

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922

[ Deviations on important/critical conditions along with their withdrawal price]

Sl. No. Vol./ Section Clause No./ Page No. Statement of Deviations/Variations/Exceptions Withdrawal Price (in INR)

Date: -- Printed Name :

Place:. Designation :

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922 Attachment- 6

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

(Additional Information)

Bidder’s Name and Address (the Bidder) : To :

General Manager(C&M)

Name : Power Grid Corporation of India Ltd.,

Address : SR-II,RHQ

Singanayakanahalli,Yelahanka

Bangalore-560064

We have enclosed with our proposal the following additional information for the subject package:

S. No. Brief description of Information Ref. and Page No.

Note: The Bidder should accordingly upload the scanned copies of the relevant documents ( as per bidding documents).

Date: -- Printed Name :

Place:. Designation :

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922

S. No. Brief description of Information Ref. and Page No.

Date: -- Printed Name : 0

Place:. Designation : 0

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922 Attachment - 7

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

(Work Completion Schedule)

Bidder’s Name and Address (the Bidder) : To :

General Manager(C&M)

Name : Power Grid Corporation of India Ltd.,

Address : SR-II,RHQ

Singanayakanahalli,Yelahanka

Bangalore-560064

We hereby declare that Work Completion Schedule shall be followed by us as per the bidding documents in furnishing and installation of the subject Package i.e., Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS for the period commencing from the effective date of Contract :

Sl. No. Description of Work/ Activity Period in weeks (from the effective date of LOA)

Commencement completion

Date : -- Printed Name :

Place : Designation :

Note : Bidders to enclose a detailed network covering all the activities to be undertaken for completion of the project indicating key dates for various milestones for each phase constituent-wise.

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922 Attachment - 8

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

(Information regarding Ex-employees of POWERGRID in our Organisation)

Bidder’s Name and Address (the Bidder) : To :

General Manager(C&M)

Name : Power Grid Corporation of India Ltd.,

Address : SR-II,RHQ

Singanayakanahalli,Yelahanka

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : -- Printed Name :

Place : Designation :

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922 Attachment - 8

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

(Information regarding Ex-employees of POWERGRID in our Organisation)

0 General Manager(C&M)

Name : Power Grid Corporation of India Ltd.,

Address : SR-II,RHQ

Singanayakanahalli,Yelahanka

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : -- Printed Name :

Place : Designation :

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922 Attachment - 8

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

(Information regarding Ex-employees of POWERGRID in our Organisation)

0 General Manager(C&M)

Name : Power Grid Corporation of India Ltd.,

Address : SR-II,RHQ

Singanayakanahalli,Yelahanka

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : -- Printed Name :

Place : Designation :

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922 Attachment-9

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

(Declaration regarding Social Accountability)

Bidder’s Name and Address (the Bidder) : To :

General Manager(C&M)

Name : Power Grid Corporation of India Ltd.,

Address : SR-II,RHQ

Singanayakanahalli,Yelahanka

Bangalore-560064

We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.

Date : -- Printed Name :

Place : Designation :

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922 Attachment-10

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

(Declaration regarding Environmental management)

Bidder’s Name and Address (the Bidder) : To :

General Manager(C&M)

Name : Power Grid Corporation of India Ltd.,

Address : SR-II,RHQ

Singanayakanahalli,Yelahanka

Bangalore-560064

We conform that we stand committed to comply to all requirements of "Environmental management system " i.e. ISO 14001 (latest Standard available at www.iso.org) and maintain the necessary records.

Date : -- Printed Name :

Place : Designation :

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922 Attachment-11

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

Bidder’s Name and Address (the Bidder) : To :

General Manager(C&M)

Name : Power Grid Corporation of India Ltd.,

Address : SR-II,RHQ

Singanayakanahalli,Yelahanka

Bangalore-560064

Date : -- Printed Name :

Place : Designation :

Instruction for printing & submitting Integrity Pact

1. The requisite format of Integrity Pact is getting generated automatically and displayed here below.

2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.

3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.

4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.

5. For further details bidders may please refer ITB Clause 9.3 (n).

Power Grid Corporation of India Limited

having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai, New Delhi – 110016 hereinafter referred to as

having its Registered Office at

having its Registered Office at & and & respectively

hereinafter referred to as

"The Bidder/Contractor"

POWERGRID intends to award, under laid-down organisational procedures, contract(s) for Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 1 of 8

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS Package and Specification Number SR-II/C&M/WC-4595/2025 RFX: 5002004922 POWERGRID values full compliance with all relevant laws and regulations, and the principles of economical use of resources, and of fairness and transparency in its relations with its Bidders/ Contractors.

In order to achieve these goals, POWERGRID and the above named Bidder/Contractor enter into this agreement called 'Integrity Pact' which will form a part of the bid.

It is hereby agreed by and between the parties as unde r:

Section I - Commitments of POWERGRID

(1) POWERGRID commits itself to take all measures necessary to prevent corruption and to observe the following principles :

a) No employee of POWERGRID, personally or through family members, will in connection with the tender, or the execution of the contract, demand, take a promise for or accept, for him/herself or third person, any material or other benefit which he/she is not legally entitled to.

b) POWERGRID will, during the tender process treat all Bidder(s) with equity and fairness. POWERGRID will in particular, before and during the tender process, provide to all Bidder(s) the same information and will not provide to any Bidder(s) confidential/ additional information through which the Bidder(s) could obtain an advantage in relation to the tender process or the contract execution.

c) POWERGRID will exclude from evaluation of Bids its such employee(s) who has any personnel interest in the Companies/Agencies participating in the Bidding/Tendering process.

(2) If Chairman and Managing Director obtains information on the conduct of any employee of POWERGRID which is a criminal offence under the relevant Anti-Corruption Laws of India, or if there be a substantive suspicion in this regard, he will inform its Chief Vigilance Officer and in addition can initiate disciplinary actions under its Rules.

Section II - Commitments of the Bidder/Contractor

(1) The Bidder/Contractor commits himself to take all measures necessary to prevent corruption. He commits himself to observe the following principles during his participation in the tender process and during the contract execution :

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 2 of 8

a) The Bidder/Contractor will not, directly or through any other person or firm, offer, promise or give to POWERGRID, or to any of POWERGRID's employees involved in the tender process or the execution of the contract or to any third person any material or other benefit which he/she is not legally entitled to, in order to obtain in exchange an advantage during the tender process or the execution of the contract.

b) The Bidder/Contractor will not enter into any illegal agreement or understanding, whether formal or informal with other Bidders/Contractors. This applies in particular to prices, specifications, certifications, subsidiary contracts, submission or non-submission of bids or actions to restrict competitiveness or to introduce cartelization in the bidding process.

c) The Bidder/Contractor will not commit any criminal offence under the relevant Anti-corruption Laws of India; further, the Bidder/Contractor will not use for illegitimate purposes or for purposes of restrictive competition or personal gain, or pass on to others, any information provided by POWERGRID as part of the business relationship, regarding plans, technical proposals and business details, including information contained or transmitted electronically.

d) The Bidder/Contractor of foreign origin shall disclose the name and address of the Agents/representatives in India, if any, involved directly or indirectly in the Bidding. Similarly, the Bidder/Contractor of Indian Nationality shall furnish the name and address of the foreign principals, if any, involved directly or indirectly in the Bidding.

e) The Bidder/Contractor will, when presenting his bid, disclose any and all payments he has made, or committed to or intends to make to agents, brokers or any other intermediaries in connection with the award of the contract and/or with the execution of the contract.

f) The Bidder/Contractor will not misrepresent facts or furnish false/forged documents/informations in order to influence the bidding process or the execution of the contract to the detriment of POWERGRID.

(2) The Bidder/Contractor will not instigate third persons to commit offences outlined above or be an accessory to such offences.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 3 of 8

Section III- Disqualification from tender process and exclusion from future contracts

(1) If the Bidder, before contract award, has committed a serious transgression through a violation of Section II or in any other form such as to put his reliability or credibility as Bidder into question, POWERGRID may disqualify the Bidder from the tender process or terminate the contract, if already signed, for such reason.

(2) If the Bidder/Contractor has committed a serious transgression through a violation of Section II such as to put his reliability or credibility into question, POWERGRID may after following due procedures also exclude the Bidder/Contractor from future contract award processes. The imposition and duration of the exclusion will be determined by the severity of the transgression. The severity will be determined by the circumstances of the case, in particular the number of transgressions, the position of the transgressors within the company hierarchy of the Bidder/Contractor and the amount of the damage. The exclusion will be imposed for a minimum of 12 months and maximum of 3 years.

(3) If the Bidder/Contractor can prove that he has restored/recouped the damage caused by him and has installed a suitable corruption prevention system, POWERGRID may revoke the exclusion prematurely.

Section IV - Liability for violation of Integrity Pact

(1) If POWERGRID has disqualified the Bidder from the tender process prior to the award under Section III, POWERGRID may forfeit the Bid Guarantee under the Bid.

(2) If POWERGRID has terminated the contract under Section III, POWERGRID may forfeit the Contract Performance Guarantee of this contract besides resorting to other remedies under the contract.

Section V- Previous Transgression

(1) The Bidder shall declare in his Bid that no previous transgressions occurred in the last 3 years with any other Public Sector Undertaking or Government Department that could justify his exclusion from the tender process.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 4 of 8

(2) If the Bidder makes incorrect statement on this subject, he can be disqualified from the tender process or the contract, if already awarded, can be terminated for such reason.

Section VI - Equal treatment to all Bidders / Contractors

(1) POWERGRID will enter into agreements with identical conditions as this one with all Bidders.

(2) POWERGRID will disqualify from the tender process any bidder who does not sign this Pact or violate its provisions.

Section VII - Punitive Action against violating Bidders / Contractors

If POWERGRID obtains knowledge of conduct of a Bidder or a Contractor or his subcontractor or of an employee or a representative or an associate of a Bidder or Contractor or his Subcontractor which constitutes corruption, or if POWERGRID has substantive suspicion in this regard, POWERGRID will inform the Chief Vigilance Officer (CVO).

(*)Section VIII - Independent External Monitor/Monitors

(1) POWERGRID has appointed a panel of Independent External Monitors (IEMs) for this Pact with the approval of Central Vigilance Commission (CVC), Government of India, out of which one of the IEMs has been indicated in the NIT/IFB.

(2) The IEM is to review independently and objectively, whether and to what extent the parties comply with the obligations under this agreement. He has right of access to all project documentation. The IEM may examine any complaint received by him and submit a report to Chairman-cum-Managing Director, POWERGRID, at the earliest. He may also submit a report directly to the CVO and the CVC, in case of suspicion of serious irregularities attracting the provisions of the PC Act. However, for ensuring the desired transparency and objectivity in dealing with the complaints arising out of any tendering process, the matter shall be referred to the full panel of IEMs, who would examine the records, conduct the investigations and submit report to Chairman-cum-Managing Director, POWERGRID, giving joint findings.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 5 of 8

(3) The IEM is not subject to instructions by the representatives of the parties and performs his functions neutrally and independently. He reports to the Chairman-cum-Managing Director, POWERGRID.

(4) The Bidder(s)/Contractor(s) accepts that the IEM has the right to access without restriction to all documentation of POWERGRID related to this contract including that provided by the Contractor/Bidder. The Bidder/Contractor will also grant the IEM, upon his request and demonstration of a valid interest, unrestricted and unconditional access to his documentation. The same is applicable to Subcontractors. The IEM is under contractual obligation to treat the information and documents of the Bidder(s)/Contractor(s)/Subcontractor(s) with confidentiality.

(5) POWERGRID will provide to the IEM information as sought by him which could have an impact on the contractual relations between POWERGRID and the Bidder/Contractor related to this contract.

(6) As soon as the IEM notices, or believes to notice, a violation of this agreement, he will so inform the Chairman-cum-Managing Director, POWERGRID and request the Chairman-cum-Managing Director, POWERGRID to discontinue or take corrective action, or to take other relevant action. The IEM can in this regard submit non-binding recommendations. Beyond this, the IEM has no right to demand from the parties that they act in a specific manner, refrain from action or tolerate action. However, the IEM shall give an opportunity to POWERGRID and the Bidder/Contractor, as deemed fit, to present its case before making its recommendations to POWERGRID.

(7) The IEM will submit a written report to the Chairman-cum-Managing Director, POWERGRID within 8 to 10 weeks from the date of reference or intimation to him by POWERGRID and, should the occasion arise, submit proposals for correcting problematic situations.

(8) If the IEM has reported to the Chairman-cum-Managing Director, POWERGRID, a substantiated suspicion of an offence under relevant Anti-Corruption Laws of India, and the Chairman-cum-Managing Director, POWERGRID has not, within the reasonable time taken visible action to proceed against such offence or reported it to the CVO, the Monitor may also transmit this information directly to the CVC, Government of India.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 6 of 8

(9) The word ‘IEM’ would include both singular and plural.

(*) This Section shall be applicable for only those packages wherein the IEMs have been identified in Section – I : Invitation for Bids and/or Clause ITB 9.3 in Section – III: Bid Data Sheets of Conditions of Contract, Volume-I of the Bidding Documents.

Section IX - Pact Duration

This Pact begins when both parties have legally signed it. It expires for the Contractor after the closure of the contract and for all other Bidder's six month after the contract has been awarded.

Section X - Other Provisions

(1) This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under Integrity Pact.

(2) Changes and supplements as well as termination notices need to be made in writing.

(3) If the Contractor is a partnership firm or a consortium or Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venture partners.

(4) Nothing in this agreement shall affect the rights of the parties available under the General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).

(5) Views expressed or suggestions/submissions made by the parties and the recommendations of the CVO/IEM# in respect of the violation of this agreement, shall not be relied on or introduced as evidence in the arbitral or judicial proceedings (arising out of the arbitral proceedings) by the parties in connection with the disputes/differences arising out of the subject contract.

# CVO shall be applicable for packages wherein IEM are not identified in Section IFB/BDS of Condition of Contract, Volume-I. IEM shall be applicable for packages wherein IEM are identified in Section IFB/BDS of Condition of Contract, Volume-I.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 7 of 8

(6) Should one or several provisions of this agreement turn out to be invalid, the remainder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.

Signature Signature

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

(Office Seal) (Office Seal)

Designation : Designation :

Witness 1 : Witness 1 :

Designation : Designation :

Witness 1 : Witness 1 :

Designation : Designation :

Integrity Pact Page 8 of 8

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922 Attachment- 12 6

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

(Price Adjustment Data)

PRICE VARIATION IS NOT APPLICABLE FOR THIS PACKAGE

General Manager(C&M)

Name : Power Grid Corporation of India Ltd.,

Address : SR-II,RHQ

Singanayakanahalli,Yelahanka

We hereby Confirm, the prices are quoted in accordance to Price variation provisions of the bidding documents.

Sl. No. Name of Materials/Labour Name of the published index Value of index (30 days prior to date of opening of bids)

1 Supply & Placement of Reinforcement Steel

A High Speed Diesel coefficient Wholesale Price Index Number for ‘High Speed Diesel’ (Individual commodity) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).

L Labour coefficient Indian Labour Bureau, Shimla, Govt. of India (monthly) (Base: 2001 = 100) (www.labourbureau.nic.in)

B Ferrous Metals coefficient Wholesale Price Index Number for ‘Ferrous Metals’ (Group Item) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).

2 For Concreting

A High Speed Diesel, coefficient a = Wholesale Price Index Number for High Speed Diesel’ (Individual commodity) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).

L Labour, coefficient l = Indian Labour Bureau, Shimla, Govt. of India (monthly) (Base: 2001 = 100) (www.labourbureau.nic.in)

B Cement & Lime, coefficient b = Wholesale Price Index Number for ‘Cement & Lime’ (Group Item) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).

C Structural Clay Products coefficient Wholesale Price Index Number for ‘Structural Clay Products’ (Group Item) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).

The Bidders are required to indicate the value of indices for various components as of 30 days prior to the date of bid opening. In case bid opening date is extended after submission of bids because of any reason, indices as of 30 days prior to actual date of bid opening shall be considered for placement of award and for payment towards price adjustment.

Date : 00-Jan-00 Printed Name :

Place : Designation :

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922 Attachment-13

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

Bidder’s Name and Address (the Bidder) : To :

General Manager(C&M)

Power Grid Corporation of India Ltd.,

Name : SR-II,RHQ

Address : Singanayakanahalli,Yelahanka

Bangalore-560064

Further, we hereby confirm that except as mentioned in the Attachment -4 (Commercial Deviations), Attachment -5 (Technical Deviations) and Attachment - 5A (Deviations on important/critical conditions along with their withdrawal price) thereof , forming part of our Techno commercial bid:

(i) there are no discrepencies/inconsistencies and deviations/omissions/reservations to the Bidding Documents, in the Second Envelope bid;

Date : -- Printed Name :

Place : Designation :

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

23 Twenty Three

27 Twenty Seven

28 Twenty Eight

33 Thirty Three

37 Thirty Seven

38 Thirty Eight

73 Seventy Three

74 Seventy Four

75 Seventy Five

77 Seventy Seven

78 Seventy Eight

79 Seventy Nine

83 Eighty Three

87 Eighty Seven

88 Eighty Eight

93 Ninety Three

97 Ninety Seven

98 Ninety Eight

100 One Hundred

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922 ATTACHMENT-14

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

Information for E-payment, PF details and declaration regarding Micro/Small & Medium Enterprises)

Name : Contracts & Materials Department

Address : Power Grid Corporation of India Ltd.,

Near RTO Test Drive Track, Singanayakanahally

Yelahanka, Bangalore - 560 064

I We are furnishing the following details of Statutory Registration Numbers and details of Bank for electronic payment.

1. Name of the Supplier/ Contractor in whose favour payment is to be made

2. Address with PIN Code and State

Registered Office:

Correspondence Address:

3. Status – Company/others

[Declaration of Micro/ Small/ Medium Enterprise under Micro/ Small & Medium Enterprises Development Act 2006, if applicable]

4. Permanent Account (PAN) No.

6. PF Registration No. of the Company

7. PF Regional Office covered (with Address)

8. Name of Contact Person

9. Telephone No(s)

10. Bank Details for Electronic Payment

Name of the Bank:

Address of Branch:

Type of Account:

Type of Account: Current Account 2

11. 9 digit MICR code printed at bottom in middle, next to cheque no.

12. IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed

We hereby declare that the above information are true and correct and we agree that the payment on account of this Contract, in the event of award, be made in the above account maintained in the above mentioned Bank.

Date : -- Printed Name :

Place : Designation :

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922 ATTACHMENT-15A

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

Declaration regarding adherence to the POWERGRID Whistle Blower and Fraud Prevention Policy

Address : General Manager(C&M) 0

Power Grid Corporation of India Ltd., 0

Singanayakanahalli,Yelahanka 0

Dear Sir, Bangalore-560064 0

We, hereby, declare that we, along with our associate/ collaborators/ sub-contractors/ sub-vendors/consultants/ service providers shall strictly adhere to the POWERGRID Whistle Blower and Fraud Prevention Policy. We, along with our associate / collaborator / subcontractors / sub-vendors / consultants / service providers shall observe the highest standard of ethics and shall not indulge or allow anybody else working in our organization to indulge in fraudulent activities during execution of the contract and would immediately apprise the Employer about any fraud or suspected fraud as soon as it comes to our notice.

Sl. No. Description of Work Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

1 Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS We, hereby, declare that we, along with our associate/ collaborators/ sub-contractors/ sub-vendors/consultants/ service providers shall strictly adhere to the POWERGRID Whistle Blower and Fraud Prevention Policy.

2 Procurement of equipment/ components & assembly a) commencement

3 Type Tests a) commencement

4 Manufacturing a) commencement

5 Shipments & Delivery a) commencement

6 Establishment of site office

7 Installation at Site a) commencement

8 Testing & Pre-commissioning a) commencement

9 Trial Operation a) commencement

b) completion 18

Date : -- Printed Name :

Place : Designation:

Note: Bidders to enclose a detailed network covering all the activities to be undertaken for completion of the project indicating key dates for various milestones for each phase constituent-wise

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922 ATTACHMENT-16

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

Declaration by the bidder for ‘Code of Integrity for Public procurement

Bidder’s Name : To:

Bidder’s Address : Sr.General Manager(C&M) 0

Power Grid Corporation of India Ltd., 0

Singanayakanahalli,Yelahanka 0

Dear Sir, Bangalore-560064 0

1.We have read the provisions of the bidding documents regarding abiding by the ‘Code of Integrity for Public Procurement’. Accordingly, we hereby declare that we shall abide by the ‘Code of Integrity for Public Procurement’ as mentioned under ITB Clause 36 of the Bidding Documents. The details of any previous transgressions of the code of integrity with any entity in any country during the last three years or of being debarred by any other Procuring Entity are as under: (a) (b) (c)

2.We also accept that in case of violation/transgression of this code by us in competing for or in executing the Contract, Employer has the right to take punitive measures as per the provisions of the Bidding Documents and/or POWERGRID’s policy and procedure.

2 Procurement of equipment/ components & assembly a) commencement

3 Type Tests a) commencement

4 Manufacturing a) commencement

5 Shipments & Delivery a) commencement

6 Establishment of site office

7 Installation at Site a) commencement

8 Testing & Pre-commissioning a) commencement

9 Trial Operation a) commencement

b) completion 18

Date : -- Printed Name :

Place : Designation:

Note: Bidders to enclose a detailed network covering all the activities to be undertaken for completion of the project indicating key dates for various milestones for each phase constituent-wise

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922 ATTACHMENT-Bid Securing Declaration

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

Declaration by the bidder for ‘Bid Securing Declaration'

Bidder’s Name : To:

Bidder’s Address : Sr.General Manager(C&M) 0

Power Grid Corporation of India Ltd., 0

Singanayakanahalli,Yelahanka 0

Dear Sir, Bangalore-560064 0

We, [insert name of the Bidder] understand that, according to bid conditions, Bids must be supported by a Bid-Securing Declaration. We the Bidder hereby declare that, if we are in breach of any of our obligation(s) under the bidding conditions as brought out below, our bids for any package whose originally scheduled date of bid opening/actual date of bid opening (First Envelope or Second Envelope) falls within 1 year reckoned from the date of issuance of communication to this effect by the Employer, shall be considered non-responsive: 1) If we fail to submit the EMD / Bid Security for the subject package, in case our bid is evaluated as L-1; or 2) If we withdraw our bid during the period of bid validity specified by us in the Bid Form; or 3) In case we do not withdraw the deviations proposed by us, if any, at the cost of withdrawal stated by us in the bid and/or accept the withdrawals/rectifications pursuant to the declaration/confirmation made by us in Attachment – Declaration of the Bid; or 4) If we do not accept the corrections to arithmetical errors identified during preliminary evaluation of our bid pursuant to ITB Clause 27.2; or 5) If, as per the requirement of Qualification Requirements, we fail to submit a Deed of Joint Undertaking (duly attested by Notary Public of the place(s) of the respective executants (s) or registered with the Indian Embassy/High Commission in that Country) within ten days from the date of intimation of post – bid discussion; or 6) In the event of us being a successful Bidder, if we fail within the specified time limit (i) To sign the Contract Agreement, in accordance with ITB Clause 34, or (ii) To furnish the required performance security, in accordance with ITB Clause 35. or 7) In any other case specifically provided for in ITB.

2.We also accept that in case of violation/transgression of this code by us in competing for or in executing the Contract, Employer has the right to take punitive measures as per the provisions of the Bidding Documents and/or POWERGRID’s policy and procedure.

Date : -- Printed Name :

Place : Designation:

Note: Bidders to enclose a detailed network covering all the activities to be undertaken for completion of the project indicating key dates for various milestones for each phase constituent-wise

Ref.: SR-II/C&M/WC-4595/2025 RFX: 5002004922 Local Content Declaration

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

(LOCAL CONTENT CERTIFICATION)

Bidder’s Name and Address (the Organization) : To :

Sr.General Manager(C&M)

Name : Power Grid Corporation of India Ltd.,

Address : SR-II,RHQ

Singanayakanahalli,Yelahanka

Bangalore-560064

Sub. : Commercial Deviations for Package.

Format for Affidavit of Self certification regarding Local Content in line with PPP-MII order and MoP Order, if applicable, to be provided on a non-judicial stamp paper of Rs. 100/-.

I Resident of hereby solemnly affirm and declare as under:

That I will agree to abide by the terms and conditions of the Public Procurement (Preference to Make in India) Order, 2017 of Government of India issued vide Notification No:P-45021/2/2017 -BE-II dated 15/06/2017, its revision dated 04/06/2020 (hereinafter PPP-MII order), ‘Public Procurement (Preference to Make in India) to provide for Purchase Preference (linked with local content)’ order dated 28/07/2020 and 17/09/2020 issued by Ministry of Power (hereinafter MoP order) and any subsequent modifications/Amendments, if any and

That the information furnished hereinafter is correct to the best of my knowledge and belief and I undertake to produce relevant records before the procuring entity/POWERGRID or any other Government authority for the purpose of assessing the local content of goods/services/works supplied by me for Replacement of existing Asbestos roof sheets with GI roof Sheets for Store buildings at Trichy Substation. That the information furnished hereinafter is correct to the best of my knowledge and belief and I undertake to produce relevant records before the procuring entity/POWERGRID or any other Government authority for the purpose of assessing the local content of goods/services/works supplied by me for

That the local content for all inputs which constitute the said goods/services/works has been verified by me and I am responsible for the correctness of the claims made therein.

That the ‘Local Content ‘as defined in the PPP-MII order and MoP order in the goods/services/works supplied by me for Replacement of existing Asbestos roof sheets with GI roof Sheets for Store buildings at Trichy Substation. 100% That the ‘Local Content ‘as defined in the PPP-MII order and MoP order in the goods/services/works supplied by me for

That the goods/services/works supplied by me for Replacement of existing Asbestos roof sheets with GI roof Sheets for Store buildings at Trichy Substation. CLASS-I LOCAL SUPPLIER That the goods/services/works supplied by me for

That the value addition for the purpose of meeting the ‘Local Content ‘has been made by me at Tamilnadu

That in the event of the local content of the goods/services/works mentioned herein is found to be incorrect and not meeting the prescribed Local Content criteria, based on the assessment of procuring agency (ies)/POWERGRID/Government Authorities for the purpose of assessing the local content, action shall be taken against me in line with the PPP-MII order, MoP order and provisions of the Integrity pact/ Bidding Documents. I agree to maintain the following information in the Company's record for a period of 8 years and shall make this available for verification to any statutory authority. i Name and details of the Local Supplier (Registered Office, Manufacturing unit location, nature of legal entity) ii. Date on which this certificate is issued iii. Goods/services/works for which the certificate is produced iv. Procuring entity to whom the certificate is furnished v. Percentage of local content claimed and whether it meets the Local Content prescribed for ‘Class –I local supplier’ vi. Name and contact details of the unit of the Local Supplier (s) vii. Sale Price of the product viii Ex-Factory Price of the product ix. Freight, insurance and handling x. Total Bill of Material xi List and total cost value of input used to manufacture the Goods/to provide services/in construction of works xii. List and total cost of input which are domestically sourced. Value addition certificates from suppliers, if the input is not in-house to eb attached xiii. List and cost of inputs which are imported, directly or indirectly

Date: -- Printed Name :

Place:. Designation :

[Commercial Deviations Schedule]

Sl. No. Vol./ Clause Ref/ Page No. As Specified in the specification Commercial Deviation & Variations/Exceptions

Date: Printed Name :

Place:. Designation :

Tender Enquiry No. : SR-II/C&M/WC-4595/2025 RFX: 5002004922 Techno commercial bid Others

2 or More TRUE FALSE

BID PROPOSAL FORM (Techno commercial bid) We are UDYAM registered and exempted from submission of Bid Guarantee as per the provision of clause no. 12.7 of ITB, Section -IV, Vol-I of bidding documents. We have enclosed a copy of UDYAM Certificate reference no. dated DD-MM-YYYY and the issued certificate is valid upto and inclusive of DD-MM-YYYY. It is to confirm that the equipment(s)/item(s)/material(s) quoted in our bid is in the list of items indicated in UDYAM certificate enclosed. We have enclosed a Bid Guarantee in original and one copy in the form of Demand Draft (UDYAM Certificate No.-, dated DD-MM-YYYY issued from ) for a sum of Rupees /-, Valid for a period of 250 days from the date of opening of bids i.e. upto and inclusive of DD-MM-YYYY. Tick only one Option (Yes/No)

Demand Draft No. Tick at least one Option (Yes/No)

Bid Proposal Ref. No. UDYAM Certificate No.

General Manager(C&M)

Power Grid Corporation of India Ltd.,

Singanayakanahalli,Yelahanka

Bangalore-560064

All the prices and the price components stated in our bid price are firm in accordance with provisions of the bidding documents. All the prices and other terms and conditions of this proposal are valid for a period of Six [06] calendar Months from the date of opening of the bid i.e. up to and inclusive of

Name of Contract : Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

Dear Ladies and/or Gentlemen,

1.0 We, the undersigned Bidder, having read and examined in detail the specification and documents of the subject package including amendment, if any, do hereby propose for Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS as detailed in the specification and the bidding documents for the subject package. EMD DETAIL FORM

Are you UDYAM/MSME Registered: Yes No

Select the Form of EMD : Demand Draft

2.0 BID GUARANTEE/Earnest Money Deposit(EMD): UDYAM Certificate No.

2.1 We are bidders registered with Micro and Small Enterprises (MSEs) in UDYAM Portal as specified by Ministry of Micro, Small and Medium Enterprises.We are submitting Bid Securing declaration in the format and futher to becoming L1 bidder, EMD shall be submitted on initimation. Name of Issuing Bank :

Amount of EMD/ Bank Guarantee :

Date of Issuance DD MM YYYY

Valid up to DD MM YYYY

2.2 If I/We fail to keep the tender open as aforesaid or make any modifications in the terms and conditions of the tender which are not acceptable to POWERGRID, I/we agree that the POWERGRID shall without prejudice to any other right or remedy, be at liberty to forfeit the said earnest money absolutely. Should this tender be accepted, I/we hereby agree to abide by and fulfill all the terms, conditions and provisions of the aforesaid documents.

2.3 If, after the tender is accepted and I/we fail to commence the execution of the works as provided in the conditions, I/we agree that the corporation shall without prejudice to any other right or remedy be at liberty to forfeit the said earnest money absolutely.

2.0 PRICES & VALIDITY :

2.1 We understand that all prices and price components stated in the bid shall remain firm and not subject to any price adjustment, in line with the bidding documents. All prices and other terms and conditions of this proposal are valid for a period of 120 (One hundred Twenty) days from the date of opening of the Envelope-I(Techno commercial bid). We further declare that prices stated in our proposal are in accordance with your bidding documents.

2.2 Further, we confirm that we have read all the provisions in the Invitation for Bid (IFB), Instructions to bidders (ITB), Conditions of Contract for Civil Works and that of Special Conditions of Contract (SCC) (inclusive of those regarding applicable taxes, duties and levies in relevant clauses), Technical specifications & other documents and have submitted the bid accordingly.

2.3 We do hereby confirm that our bid prices quoted in our Proposal include, all costs such as cost of necessary materials, their transportation to site, cost towards tools, equipment and machineries including cost of personnel that may be required for successful completion of the work/s as per the Technical Specifications, including cost of site arrangement, overheads, insurance, whatsoever, as stipulated in the bidding documents for the total scope of work/s and all applicable taxes, duties and levies for all transactions between us and our sub-contractors as well as for all transactions between us and POWERGRID. We understand that Owner shall not entertain any claim on account of any taxes, duties or other levies or any interest therein.

2.5 We declare that items left blank in the Schedules will be deemed to have been included in other items. The total for each schedule and the total of grand summary shall be deemed to be the total price for executing the facilities and sections thereof in complete accordance with the Contract, whether or not each individual item has been priced.

4.0 DEVIATIONS:

4.1 We declare that the Contract shall be executed strictly in accordance with the specifications and documents except for the variations and deviations, all of which have been detailed out exhaustively in the following schedules, irrespective of whatever has been stated to the contrary anywhere else in our proposal.

a) Schedule of Commercial Deviations

b) Schedule of Cost of withdrawal of Deviations

c) Schedule of Technical Deviations

4.2 We confirm that specified stipulation of following critical clauses are acceptable to us and no deviations/exceptions are taken on any account whatsoever in the following clauses:

[a] Bid Security/ Bid Guarantee Clause No 12.0, ITB Volume-I

[b] Terms of Payment Clause No.64.0, Conditions of Contract (GCC) & Clause16.0 of SCC , Section-V, Volume-I

[c] Contract Performance Guarantee/Performance Security Clause No.14,Section GCC, Vol.-I & Clause 8.0 of SCC,Section-V, Vol-I & Clause 32.0 of ITB,Section-II, Volume-I

[d] Liquidated Damages Clause No 14.0 of SCC, Volume-I

[e] Price & Price Basis Clause No 10.0 of ITB, Section-II, Cl.5.0 of SCC, of Volume-I,

[f] Guarantee & Defect Liability Period Cl.No.45.0 & 46.0 Section. GCC, Vol. I, Conditions of Contract & Clause 15.0 of SCC, Section-V, Volume- I

[g] Work schedule Clause No. 10.0 of SCC, Section-V,Volume -I

4.3 In line with relevant Clauses in Bid documents, we have declared the withdrawal price in Attachment – 5A for the deviations taken against the Clauses mentioned above and we undertake to execute the contract inline with the provisions of these clauses in case POWERGRID agree to bear the withdrawal cost.

4.4 Further, we agree that additional conditions, deviations, if any found in the proposal documents other than those stated in deviation Schedules, save that pertaining to any rebates offered, shall not be given effect to.

5.0 WORK SCHEDULE:

5.1 If this proposal is accepted by you, we agree to arrange site visit, submit Engineering data, provide services and complete the entire work from time to time in accordance with schedules indicated in the proposal. We fully understand that the time schedule stipulated in the proposal is the essence of the contract, if awarded. The completion schedule of the various major key phases of the Package is indicated.

7.0 CONTRACT PERFORMANCE GUARANTEE:

7.1 We further agree that if our proposal is accepted we shall provide an irrevocable Contract Performance Guarantee, within 15 days from LOA of value equivalent to ten percent (10%) of the Contract Price valid upto the end of ninety (90) days after the end of the contract warranty period in the form of ......................................... (Please specify the form of Guarantee) ……………... in your favour and enter into a formal agreement with you within Fifteen (15) days from the date of issue of Letter of Award of Contract.

8.0 Information regarding Ex-employees of POWERGRID who had retired/resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us; any other information in addition to the information called for in the proposal sheets and checklist duly filled in is enclosed as per respective schedules/ attachments.

6.0 We hereby declare that only the persons or firms interested in this proposal as principal or principals are named herein and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if we are awarded the contract, that this proposal is made without any connection with any other person, firm or party like-wise submitting a proposal and that this proposal is in all respects for and in good faith, without collusion or fraud.

Thanking you, we remain,

Yours faithfully,

For and on behalf of

Date : -- Printed Name :

Place : Designation :

In case of bid from a Joint Venture, name & designation of representative of JV partner is to be provided and Bid Form is also to be signed by him 1 Jan 2013

Other Partner -1 Other Partner -2 2 Feb 2014

Printed Name : Printed Name : 2 4 Apr 2016

Designation : Designation : 5 May 2017

Please provide additional information of the Bidder 8 Aug

Business Address : 9 Sep

Name of Principal Officer : 12 Dec

Address of Principal Officer : 13

Note: (i) Written power of Attorney of Signatories of bid to commit the Bidder must be enclosed with the bid. (ii) Bidders may note that no prescribed proforma has been enclosed for Attachment -2 i.e. Power of Attorney. (iii) Bidders may use their own proforma for furnishing the required information with the bid. 16 1 one 1 st 1 January

17 2 two 2 nd 2 February

18 3 three 3 rd 3 March

19 4 four 4 th 4 April

20 5 five 5 th 5 May

21 6 six 6 th 0 6 June

22 7 seven 7 th 1 7 July

23 8 eight 8 th January 8 August

24 9 nine 9 th 1900 9 September

25 10 ten 10 th 10 October

26 11 eleven 11 th 11 November

27 12 twelve 12 th 12 December

28 13 thirteen 13 th

29 14 fourteen 14 th

30 15 fifteen 15 th

31 16 sixteen 16 th

the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). 17 seventeen 17 th

Bank Draft 18 eighteen 18 th

Pay Order 19 nineteen 19 th

Banks certified Cheque Zero 20 twenty 20 th

Bank Guarantee #REF! 21 st

Applicable 23 th

Not Applicable 24 th

Package Name Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

Package Code Civil Works

Specification No. SR2/NT/W-CIVIL/DOM/C00/25/15611--- SRTS-II/C&M/ WC-4595/2025-------RFX: 5002004922

SR2/NT/W-CIVIL/DOM/C00/25/15611--- SRTS-II/C&M/ WC-4595/2025-------RFX: 5002004922

1 Fill up only green shaded cells in Sch-3, Sch-5, Sch-6 and Bid Form of price bid

2 All the cells in Sch-5 & Sch-6 are auto filled, therefore no cell is required to be filled up there.

3 Instructions / error messages, if any, will be displayed automatically after selecting the cell.

4 After filling up all the schedues, save the file, take print out of all the schedules and Bid form and sign & stamp and submit them as hard copy of the 2nd envelope (Price part) of the bid. Also ensure to submit the soft copy of the the same file on CD/ DVD.

I While filling up the worksheets following may please be observed :

(i) Fill up only green shaded cells.

(ii) Certain data type entries have been restricted, such as Numeric values or limits of numeric values.

(iii) Select only the options provided in pull down menus.

(iv) Do not link any cell of this work book with any other work book.

(v) Do not use copy & paste or cut & paste options for filling up the data.

(vi) Do not reformat any of the cell of the work book.

II This Workbook consists of following worksheets :

Opening page of the workbook.

Names of Bidder :

● Select Sole Bidder or JV (Joint Venture) from the pull down menu. Do not leave this cell blank.

● Select nos. of the JV Partners other than the Lead Partner from drop down menu.

● In case of JV partners more than 2, enter details of 3rd & more partners along with details of 2nd partner.

● Fill up names and address of the Sole Bidder and /or Joint Venture.

● Fill up date in dd-mmm-yyyy format from drop down menu.

● Click for proceed given at the right top of the worksheet and go to Sch-3.

Sch-1 (Ex-works Prices) :

● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.

● Corresponding cell for mode of transaction shall be come enable only after filling up the unit rate, therefore first fill up the unit rate and then mode of transaction for the corresponding item.

● Total amount shall get calculated automatically.

● Type Test charges shall appear automatically after filling up Sch-7 appropriately.

Sch-2 (Freight & Insurance Charges) :

● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.

● Total amount shall get calculated automatically.

Sch-3 (Service Contract) :

● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.

● Total amount shall get calculated automatically.

Sch-4 (Training Charges) :

● Not applicable, hence no cell is required to be filled up.

Sch-5 (Summary of Taxes and Duties applicable on the Goods and Services) :

● No cell is required to be filled in by the bidder in this worksheet.

● Summary of all the Schedules without considering discount (mentioned in the work sheet discount) shall be displayed automatically.

● No cell is required to be filled in by the bidder in this worksheet.

Sch-7 (Type Test Charges) :

● Fill up the rates & location where type tests are proposed.

● Total of this Sch-7 shall automatically appear in Sch-1.

Bid from of price bid :

● Fill up ref. no. as bidder's ref no. of this letter.

● This letter shall consider the net price as per Sch-6 (After Discount).

● Fill up names & Designation of the representatives of other JV partner(s) if the bidder is JV (Joint Venture) .

● Fill up additional information as required.

Happy Bidding !

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

SR2/NT/W-CIVIL/DOM/C00/25/15611--- SRTS-II/C&M/ WC-4595/2025-------RFX: 5002004922 Sole Bidder 1

JV (Joint Venture) 2 or More

Enter following details of the bidder

Specify type of Bidder [Select from drop down menu] Sole Bidder 0

Address of Bidder

Name of other Partner - 1

Address of other Partner - 1

Name of other Partner - 2 (more, if any) …….. …….. …….. …….. …….. ……..

Address of other Partner - 2 (more, if any) …….. …….. …….. …….. …….. ……..

email ID of Bid Signatory

Mobile No. of Bid Signatory

Tel No. of Bid Signatory

Fax No. of Bid Signatory

SR2/NT/W-CIVIL/DOM/C00/25/15611--- SRTS-II/C&M/ WC-4595/2025-------RFX: 5002004922 Schedule - 1

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

(SCHEDULE OF RATES AND PRICES)

Bidder’s Name and Address (Bidder) : To:

Sr.GM , Contracts & Materials Department,

Name : Power Grid Corporation of India Ltd.,

Address : SRTS-II, RHQ

Singanayakanahalli

Bengaluru-560064

Construction of Storage platform for spares of ±320 kV HVDC Line Materials at Palakkad SS

All Prices are in Indian Rupees.

SI. No. PR No PR Line Item No Activity Description Material Code HSN Code Whether HSN in column ‘6’ is confirmed. If not indicate applicable the HSN code * Rate of GST applicable ( in %) Whether rate of GST in column ‘8’ is confirmed. If not indicate applicable rate of GST * Item Description Unit Qty. Unit Ex-works price (excluding GST) Total Ex-works price (excluding GST) GST

1 7000005840 20 FABRICATION AND SUPPLY 76169990 18% Supply of Galvanised Steel PG Clamps for Sheild / Earth wire of dia 10.98 mm in line with the drawing enclosed Nos 1300 Included 0.00 0 0.00

2 76169990 18% Supply of Galvanised Steel PG clamps suitable to accommodate Earthwire of 10.98 mm in one groove and 12 mm OPGW cable in the other groove, in line with the tentative drawing enclosed. Nos 1300 Included 0.00 0 0.00

3 76169990 18% Supply of 1.5 mm thickness Galvanised steel 'C' / 'U' clamp suitable for 10.98 mm earthwire / shield wire,in line with the drawing enclosed. Nos 23400 Included 0.00 0 0.00

Total Ex-Works Price 0.00 0.00

Total Type Test charges as per Schedule-7 0.00

Total Ex-works Price including Type Test charges 0.00 0.00 Total GST

Note : Specify amount of GST on the transaction between the Contractor and the Employer.

* In case the bidder leaves the cell for confirmation of the HSN code and/or GST rate “blank”, the HSN code and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.

Place : Printed Name :

SR2/NT/W-CIVIL/DOM/C00/25/15611--- SRTS-II/C&M/ WC-4595/2025-------RFX: 5002004922 Schedule - 1 Direct Total 0 Sole Bidder `

BO Total #REF! 0

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

(SCHEDULE OF RATES AND PRICES : EX-WORKS PRICES)

Bidder’s Name and Address (Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd., , & …….. …….. …….. …….. …….. ……..

Address : "Saudamini", Plot No.-2

Gurgaon (Haryana) - 122001

Plant and Equipment (including Mandatory Spares Parts) to be supplied, including Type Test Charges for Tests to be conducted. Direct

All Prices are in Indian Rupees. Bought-Out

SI. No. Item Description Unit Qty. Unit Ex-works price Total Ex-works price Mode of Transaction (Direct / Bought-out)

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

Total Ex-Works Price Direct 0.00 Direct

Total Ex-Works Price Bought Out 0.00

Total Ex-Works Price 0.00

Total Type Test charges as per Schedule-7 #REF! #REF! #REF!

Total Ex-works Price including Type Test charges #REF! #REF! #REF!

Discount Sch-1 #REF! MPD Sch-1 #REF!

Dis Alert #REF!

Note : Specify amount of Excise Duty, Sales Tax/'VAT and other taxes payable on the transaction between the Contractor and the Employer and octroi/entry tax as applicable for destination site/state on all items of supply including bought-out finished items (to be identified in the Contract), which shall be dispatched directly from the sub-vendor’s works to the Employer’s site (sale-in-transit), separately in Schedule-5. Excise Duty, Sales tax and other levies for all the bought-out items are to be included in the EXW Price (Col. No. 5) only and not to be indicated in Schedule-5.

Place : Printed Name :

SR2/NT/W-CIVIL/DOM/C00/25/15611--- SRTS-II/C&M/ WC-4595/2025-------RFX: 5002004922 Schedule - 2

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

(SCHEDULE OF RATES AND PRICES :Transportation, In-transit insurance, loading and unloading.)

Bidder’s Name and Address (Bidder) : To:

Sr.GM , Contracts & Materials Department,

Name : Power Grid Corporation of India Ltd.,

Address : SRTS-II, RHQ

Singanayakanahalli

Bengaluru-560064

All Prices are in Indian Rupees.

SI. No. PR No PR Line Item No Activity Description Material Code Description Unit Quantity Unit Prices F&I including packing and forwading Including taxes Total Prices

1 7000005840 20 FABRICATION AND SUPPLY 1000015274 Supply of Galvanised Steel PG Clamps for Sheild / Earth wire of dia 10.98 mm in line with the drawing enclosed Nos 1300 Included

2 Supply of Galvanised Steel PG clamps suitable to accommodate Earthwire of 10.98 mm in one groove and 12 mm OPGW cable in the other groove, in line with the tentative drawing enclosed. Nos 1300 Included

3 Supply of 1.5 mm thcikness Galvanised steel 'C' / 'U' clamp suitable for 10.98 mm earthwire / shield wire,in line with the drawing enclosed. Nos 23400 Included

Total F&I Price 0.00

Place : Printed Name :

SR2/NT/W-CIVIL/DOM/C00/25/15611--- SRTS-II/C&M/ WC-4595/2025-------RFX: 5002004922 Schedule - 3

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS As per Lum-sum 0.00%

(SCHEDULE OF RATES AND PRICES ) AS per Percent #REF!

As per lum-sum on Sch-3 0.00%

Bidder’s Name and Address (Sole Bidder) : To: As per Percent on Sch-3 #REF!

C&M Department Total Discount #REF!

Name : Power Grid Corporation of India Ltd.

Address : SR-II, RHQ

Singanayakkanahalli, Yelahanka Multipackage lum-sum #REF!

Amount after Discount (Rs.) Dis Alert Amount after MPD (Rs.)

All Prices are in Indian Rupees.

SI. No. DSR-2023 Ref SAC (Service Accounting Codes) Whether SAC in column '2’ is confirmed. If not indicate applicable the SAC * Rate of GST applicable ( in %) Whether rate of GST in column ‘ 4 ’ is confirmed. If not indicate applicable rate of GST * Description Unit Quantity Unit Rate in Rs. Total in Rs. GST TAX as confirmed by Bidder Unit Erection Charges Total Erection Charges Unit Erection Charges Total Erection Charges

Part A :Civil Works

1 4.1.8 995413 18% confirmed Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) . cum 5.00 0.00 0.00 0.00 0.00

2 4.2.3 995413 18% confirmed Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:: 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). cum 2.00 0.00 0.00 0.00 0.00

3 5.2.2 995413 18% confirmed Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) . cum 3.00 0.00 0.00 0.00 0.00

4 5.3 995413 18% confirmed Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). cum 29.00 0.00 0.00 0.00 0.00

5 5.9.3 995413 18% confirmed Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform. SQM 129.00 0.00 0.00 0.00 0.00

6 5.9.5 995413 18% confirmed Centering and shuttering including strutting, propping etc. and removal of form forLintels, beams, plinth beams, girders, bressumers and cantilevers. SQM 67.00 0.00 0.00 0.00 0.00

7 5.9.6 995413 18% confirmed Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts. SQM 39.00 0.00 0.00 0.00 0.00

8 5.9.19 995413 18% confirmed Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajjas, corbels etc., including edges. SQM 5.00 0.00 0.00 0.00 0.00

9 5.16 995413 18% confirmed Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). cum 1.00 0.00 0.00 0.00 0.00

10 5.18.2 995413 18% confirmed Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits.: 40 mm thick SQM 3.00 0.00 0.00 0.00 0.00

11 5.22A.6 995413 18% confirmed Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.: Thermo Mechanically Treated Bars of grade fe 500D or more KG 3452.00 0.00 0.00 0.00 0.00

12 5.30 995413 18% confirmed Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. M 12.00 0.00 0.00 0.00 0.00

13 6.4.2 995413 18% confirmed Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 59.00 0.00 0.00 0.00 0.00

14 6.13.2 995413 18% confirmed Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) sqm 86.00 0.00 0.00 0.00 0.00

15 6.15 995413 18% confirmed Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry. SQM 86.00 0.00 0.00 0.00 0.00

16 8.2.2.2 995413 18% confirmed Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.:Granite stone slab colour black, Cherry/Ruby red:Area of slab over 0.50 sqm SQM 18.00 0.00 0.00 0.00 0.00

17 8.4 995413 18% confirmed Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width up to 150 mm with epoxy resin based adhesive, including cleaning etc. complete. M 7.00 0.00 0.00 0.00 0.00

18 8.5 995413 18% confirmed Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. EA 7.00 0.00 0.00 0.00 0.00

19 8.31 995413 18% confirmed Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete SQM 77 0.00 0.00 0.00 0.00

20 9.70.1 995413 18% confirmed Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90 mm Each 40.00 0.00 0.00 0.00 0.00

21 9.84 995413 18% confirmed Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with Is, IS : 3564, embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. EA 8.00 0.00 0.00 0.00 0.00

22 9.88 995413 18% confirmed Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Each 4.00 0.00 0.00 0.00 0.00

23 9.96.1 995413 18% confirmed Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm EA 10.00 0.00 0.00 0.00 0.00

24 9.96.2 995413 18% confirmed Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm EA 5.00 0.00 0.00 0.00 0.00

25 9.97.2 995413 18% confirmed Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete: 250x10 mm EA 10.00 0.00 0.00 0.00 0.00

26 9.97.4 995413 18% confirmed Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete: 150x10 mm EA 5 0.00 0.00 0.00 0.00

27 9.100.1 995413 18% confirmed Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm EA 30.00 0.00 0.00 0.00 0.00

28 9.101.2 995413 18% confirmed Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper EA 10.00 0.00 0.00 0.00 0.00

29 9.147A Providing and fixing factory made uPVC Glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70mm for series R1 and R2 profiles and 2.10mm for R3 and R4 profiles conforming to EN:12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD specification, UPVC exturded glazing beads, interlocks and inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8mm dua with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/ mecanicallu jonted duly sealed corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and sgajcent fninshed wall shall be filled with weather proof silicon sealant over backer ro of approved size and quality, all completed as per approved drawing conforming to CPWD specification & direction of Engineer-In-charge. Section of steel reinfrocement and cross section of uPVC profiles to be as per design approved by Enngieer-in-charge. wire mesh/Galzing of plain/toughed/laminated/double glass unit with/without high performance coatings as per design requirements and confroming to IS:3548 & IS:16231 shall be oaud separately. Note:- Structural desin proof checked from a Governament Engineering Istiture, to be provided by the manufacturer for : (i) sites with basic wind speed >45m/sec as per IS 875-part3 (ii) sites with structure height more than 20m for all wind speeds 0.00 0.00

29.1 9.147.A4.2 995413 18% confirmed Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.Using R3 series with frame (98mm & above) x (40mm & above) & both glazed and fly screen sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m). sqm 4.00 0.00 0.00 0.00 0.00

30 9.147.A4.3 995413 18% confirmed Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.:Using R4 series with frame (115mm & above) x (45mm & above) & both glazed and fly screen sash (44mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height above 1.8m) sqm 16.00 0.00 0.00 0.00 0.00

31 9.147.C2.1 995413 18% confirmed Fixed window/ventilator with mullion/transom Using R1 series with frame (33mm & above ) x (35mm & above) & mullion (33mm & above) x (50mm & above). (Height upto 0.90 metre) SQM 4.00 0.00 0.00 0.00 0.00

32 9.147.C2.3 995413 18% confirmed Fixed window/ventilator with mullion/transom Using R3 series with frame (55mm& above)x(45mm & above) &Mullion(55mm& above) x (65mm& above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system (height upto 2.5 metre) SQM 11.00 0.00 0.00 0.00 0.00

33 10.18 995413 18% confirmed Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. Each 8.00 0.00 0.00 0.00 0.00

34 10.28 995413 18% confirmed Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). KG 213.00 0.00 0.00 0.00 0.00

35 11.23.5 995413 18% confirmed Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with: Udaipur green marbles. SQM 37.00 0.00 0.00 0.00 0.00

36 11.24 995413 18% confirmed Extra for pre finished nosing to treads of steps of marble stone. M 40.00 0.00 0.00 0.00 0.00

37 11.41.2 995413 18% confirmed Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm SQM 172.00 0.00 0.00 0.00 0.00

38 11.41A.3.1 995413 18% confirmed Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of Size of Tile 600 x 600 mm SQM 45.00 0.00 0.00 0.00 0.00

39 11.46.2 995413 18% confirmed Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm SQM 10.00 0.00 0.00 0.00 0.00

40 12.20 995413 18% confirmed Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. SQM 220.00 0.00 0.00 0.00 0.00

41 12.21.1 995413 18% confirmed Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase. M 127.00 0.00 0.00 0.00 0.00

42 12.22 995413 18% confirmed Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. Each 2.00 0.00 0.00 0.00 0.00

43 12.41.2 995413 18% confirmed Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i)Single socketed pipes. : 110 mm diameter M 57.00 0.00 0.00 0.00 0.00

44 12.42.1.2 995413 18% confirmed Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. Coupler:110 mm EA 6.00 0.00 0.00 0.00 0.00

45 12.42.3.2 995413 18% confirmed Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. Single tee with door:110x110x110 mm EA 6.00 0.00 0.00 0.00 0.00

46 12.42.5.2 995413 18% confirmed Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. Bend 87.5° : 110 mm bend EA 6.00 0.00 0.00 0.00 0.00

47 12.42.6.2 995413 18% confirmed Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.Shoe (Plain) : 110 mm Shoe EA 6.00 0.00 0.00 0.00 0.00

48 12.43.2 995413 18% confirmed Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. : 110 mm EA 36.00 0.00 0.00 0.00 0.00

49 12.46 995413 18% confirmed Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. EA 6.00 0.00 0.00 0.00 0.00

50 12.45.1 995413 18% confirmed Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugsat 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) sqm 100.00 0.00 0.00 0.00 0.00

51 13.1.2 995413 18% confirmed 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) SQM 350.00 0.00 0.00 0.00 0.00

52 13.2.2 995413 18% confirmed 15 mm cement plaster on rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) SQM 200.00 0.00 0.00 0.00 0.00

53 13.11 995413 18% confirmed 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement: 6 fine sand). SQM 160.00 0.00 0.00 0.00 0.00

54 13.16.1 995413 18% confirmed 6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand) SQM 145.00 0.00 0.00 0.00 0.00

55 13.21 995413 18% confirmed Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. Per bag of 50kg cement 25.00 0.00 0.00 0.00 0.00

56 13.26 995413 18% confirmed Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. sqm 913.00 0.00 0.00 0.00 0.00

57 13.47.1 995413 18% confirmed Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 0.9 ltr/ 10 sqm) SQM 783.00 0.00 0.00 0.00 0.00

58 13.61.1 995413 18% confirmed Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. SQM 10.00 0.00 0.00 0.00 0.00

59 13.80 995413 18% confirmed Providing and applying white cement based putty of average thickness 1mm thick, of approved brand and manufacture over the plastered wall surface of to prepare the surface even and smooth complete. SQM 783.00 0.00 0.00 0.00 0.00

60 13.83.2 995413 18% confirmed Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats Sqm 783.00 0.00 0.00 0.00 0.00

61 13.85.3 995413 18% confirmed Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre sqm 783.00 0.00 0.00 0.00 0.00

62 14.1.1 995413 18% confirmed Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) sqm 50.00 0.00 0.00 0.00 0.00

63 15.2.2 995413 18% confirmed Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix Cum 107.00 0.00 0.00 0.00 0.00

64 15.3 995413 18% confirmed Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. Cum 2.00 0.00 0.00 0.00 0.00

65 15.7.4 995413 18% confirmed Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar Cum 4.00 0.00 0.00 0.00 0.00

66 15.12.1 995413 18% confirmed Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below Each 15.00 0.00 0.00 0.00 0.00

67 15.12.2 995413 18% confirmed Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres Each 4.00 0.00 0.00 0.00 0.00

68 15.18 995413 18% confirmed Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. KG 200.00 0.00 0.00 0.00 0.00

69 15.23.1 995413 18% confirmed Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm Sqm 138.00 0.00 0.00 0.00 0.00

70 15.42.2 995413 18% confirmed Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 100 mm dia pipe. Metre 30.00 0.00 0.00 0.00 0.00

71 15.60 995413 18% confirmed Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Cum 10.00 0.00 0.00 0.00 0.00

72 17.2.1 995413 18% confirmed Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. EA 6.00 0.00 0.00 0.00 0.00

73 17.4.2 995413 18% confirmed Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. Each 2.00 0.00 0.00 0.00 0.00

74 17.7.4 995413 18% confirmed Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap EA 8.00 0.00 0.00 0.00 0.00

75 17.10.1.3 995413 18% confirmed Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board :510x1040 mm bowl depth 200 mm EA 1.00 0.00 0.00 0.00 0.00

76 17.28.2.1 995413 18% confirmed Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe: 32 mm dia EA 10.00 0.00 0.00 0.00 0.00

77 17.28.2.2 995413 18% confirmed Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe: 40 mm dia EA 1.00 0.00 0.00 0.00 0.00

78 17.32.2 995413 18% confirmed Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm EA 8.00 0.00 0.00 0.00 0.00

79 17.33 995413 18% confirmed Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. EA 5.00 0.00 0.00 0.00 0.00

80 17.34.1 995413 18% confirmed Providing and fixing toilet paper holder :C.P. brass EA 7.00 0.00 0.00 0.00 0.00

81 17.69.2 995413 18% confirmed Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.:Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms EA 1.00 0.00 0.00 0.00 0.00

82 17.22A 995413 18% confirmed Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per direction of Engineer Incharge. EA 9.00 0.00 0.00 0.00 0.00

83 17.81 995413 18% confirmed Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. Each 1.00 0.00 0.00 0.00 0.00

84 18.7.4 995413 18% confirmed Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall :32 mm nominal outer dia Pipes. M 100.00 0.00 0.00 0.00 0.00

85 18.8.2 995413 18% confirmed Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes M 100.00 0.00 0.00 0.00 0.00

86 18.8.3 995413 18% confirmed Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes M 100.00 0.00 0.00 0.00 0.00

87 18.17.1 995413 18% confirmed Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) . 25 mm nominal bore EA 6.00 0.00 0.00 0.00 0.00

88 18.17.2 995413 18% confirmed Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) . 32 mm nominal bore EA 2.00 0.00 0.00 0.00 0.00

89 18.18.3 995413 18% confirmed Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore EA 1.00 0.00 0.00 0.00 0.00

90 18.21.2.1 995413 18% confirmed Providing and fixing uplasticised PVC connection pipe with brass unions :15 mm nominal bore with 45 cm length. EA 23.00 0.00 0.00 0.00 0.00

91 18.22.1 995413 18% confirmed Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter Each 5.00 0.00 0.00 0.00 0.00

92 18.48 995413 18% confirmed Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Litre 2000.00 0.00 0.00 0.00 0.00

93 18.49.1 995413 18% confirmed Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15mm nominal bore EA 8.00 0.00 0.00 0.00 0.00

94 18.53.1 995413 18% confirmed Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, 15 mm nominal bore EA 23.00 0.00 0.00 0.00 0.00

95 18.53A 995413 18% confirmed Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. EA 16.00 0.00 0.00 0.00 0.00

96 18.77 995413 18% confirmed Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. EA 10.00 0.00 0.00 0.00 0.00

97 19.4.1.1 995413 18% confirmed Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design, 100x100 mm size P type : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 EA 2.00 0.00 0.00 0.00 0.00

98 19.7.1.1 995413 18% confirmed Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg)-With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 EA 12.00 0.00 0.00 0.00 0.00

99 19.8.1.1 995413 18% confirmed Extra for depth for manholes - Size 90x80 cm : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 M 3.00 0.00 0.00 0.00 0.00

100 21.4.1 995413 18% confirmed Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.: With stainless steel cover plate minimum 1.25 mm thickness EA 10.00 0.00 0.00 0.00 0.00

101 21.13 995413 18% confirmed Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. EA 4.00 0.00 0.00 0.00 0.00

102 21.16.2 995413 18% confirmed Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in charge: Powder coated minimum thickness 50 micron aluminium EA 10.00 0.00 0.00 0.00 0.00

103 21.17 995413 18% confirmed Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). KG 2.00 0.00 0.00 0.00 0.00

104 22.6 995413 18% confirmed Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. SQM 220.00 0.00 0.00 0.00 0.00

105 22.23.2 995413 18% confirmed Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.For horizontal surface one coat @1.10 kg per sqm. Sqm 100.00 0.00 0.00 0.00 0.00

106 26.86.3 995413 18% confirmed Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Frame size 50 x 100 mm. metre 86.00 0.00 0.00 0.00 0.00

107 26.88.1 995413 18% confirmed Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately): 30 mm thick sqm 10.00 0.00 0.00 0.00 0.00

108 26.88.2 995413 18% confirmed Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately): 35 mm thick sqm 20.00 0.00 0.00 0.00 0.00

Non schedule item(Civil) 0.00 0.00 0.00

109 NS-1 995413 18% confirmed Providing & fixing mesh Arpita or equivalent made out of galvanized iron of nominal thickness 0.35 mm with a zinc coating of 120 gms per sqm along the junctions of masonry and concrete works including fixing,scaffolding,lead & lifts etc. Sqm 50.00 0.00 0.00 0.00 0.00

110 NS-2 995413 18% confirmed Providing and fixing composite wall mixer with two inlets ( for cold and hot water ) one tap outlet and common shower out let with cp brass arm of required length for connection. Wall flanges lever controlled operation complete.( Jaquar,Hindware,parryware or Equivalent.) Each 4.00 0.00 0.00 0.00 0.00

111 NS-3 995413 18% confirmed Providing and fixing CP brass over head arm of length minimum 30cm for fixing shower through 15mm GI pipe with wall flange. Each 5.00 0.00 0.00 0.00 0.00

112 NS-4 995413 18% confirmed Supplying, laying,jointing ,testing and commisioning approved make upvc pipes SWR grade B conforming to IS 13592.The quoted rates shall include necessary fittings like Tees, bends, offsets etc. including MS angle with GI clamps complete: 160mm dia Meter 40.00 0.00 0.00 0.00 0.00

113 NS-5 995413 18% confirmed Supplying, laying,jointing ,testing and commisioning approved make upvc pipes SWR grade B conforming to IS 13592.The quoted rates shall include necessary fittings like Tees, bends, offsets etc. including MS angle with GI clamps complete: 110mm dia Meter 70.00 0.00 0.00 0.00 0.00

114 NS-6 995413 18% confirmed Supplying, laying,jointing ,testing and commisioning approved make upvc pipes SWR grade B conforming to IS 13592.The quoted rates shall include necessary fittings like Tees, bends, offsets etc. including MS angle with GI clamps complete: 75mm dia Meter 70.00 0.00 0.00 0.00 0.00

115 NS-7 995413 18% confirmed Supplying,installing,testing and commissioning approved make 15 mm CP health faucet with CP flexible tube 1.0 m long,CP crutch,nozzle and 2- way Bib Cock with wall flange etc. complete.( Jaquar,Hindware, parryware or Equivalent.) Nos 7.00 0.00 0.00 0.00 0.00

116 NS-8 995413 18% confirmed Providing and fixing of Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm Sqm 25.00 0.00 0.00 0.00 0.00

117 NS-9 995413 18% confirmed Supplying and fixing of approved make CP towel ring including CP screws with Fischer plugs etc. complete. (Jaquar,Hindware,parryware or Equivalent) Each 5.00 0.00 0.00 0.00 0.00

118 NS-10 995413 18% confirmed Providing and fixing PVC floor trap including cost of cutting and making good the walls and floors :100mm inlet and 75mm outlet. Each 12.00 0.00 0.00 0.00 0.00

119 NS-11 995413 18% confirmed Providing and fixing stainless steel gratings with or with out hole for waste pipe for floor/nahni traps 100mm dia. Each 12.00 0.00 0.00 0.00 0.00

120 NS-12 995413 18% confirmed Supplying and fixing of approved make CP towel rail 600mm long including CP screws etc. complete. Jaquar make or equiavlent Each 5.00 0.00 0.00 0.00 0.00

121 NS-13 995413 18% confirmed Supplying & Fixing of SS AISI-316 Soap Dish (150 mm Length) fixed to the wall with PVC rubber plug with CP brass screws (Make: Kich/Jaquar/Roca/ Arch/ D-Line or Equivalent). Each 5.00 0.00 0.00 0.00 0.00

122 NS-14 995413 18% confirmed Providing and fixing over the counter wash basin of size 580x355x130mm,32mm CP waste coupling .(Note:Size may vary +/-20mm and higher size may be preferred) Each 1.00 0.00 0.00 0.00 0.00

123 NS-15 995413 18% confirmed Providing & fixing of Float glass panes of nominal thickness 5 mm (weight not less than 12.50 kg/sqm) for uPVC window/door sqm 35.00 0.00 0.00 0.00 0.00

124 NS-16 995413 18% confirmed Design, Supply & installation of 710 grade, BWP solid Plywood for room cupboards: For Box work upto depth of 600mm (Carcass includes min 16mm thick plywood on sides, top & bottom panel and 12mm thick plywood on back side finished with min 0.72 mm inner laminate on both sides. The shutters shall be of 16mm thick plywood finished with min 1 mm thick decorative & balancing laminate. ALL the edges shall have matching edge band finish.) Item is including of all accessories , magnetic catcher ,locks,drapery curtain rod,soft close hinges, SS handles,stainless steel soft closing heavy type telescopic drawer channels, fitting etc of approved make as per drawing, TS and as per direction of engineer incharge ) . Only front area shall be measured for payment purpose. sqft 240.00 0.00 0.00 0.00 0.00

125 NS-17 995413 18% confirmed T.V. unit including drawer:Supply & installation of min 16 mm thick plywood shutter with front 1mm thick colour laminate and back side with balancing laminate including wall panel as per attached indiactve drawing & instruction of Engg incharge. Only front area shall be measured for payment purpose. sqft 100.00 0.00 0.00 0.00 0.00

126 NS-18 995413 18% confirmed Making Moulding, parapet bands for elevation in two steps of projection up to 100mm and total depth up to 100mm with bricks of CD 75 in cement mortar 1:6 as per drawing and directions of engineer-in-charge. Up to 100mm x 100mm in bands/cornices M 59.00 0.00 0.00 0.00 0.00

PART[B]: Electrical 0.00 0.00

1 1.10 995413 18% confirmed WIRING IN STEEL AND PVC CONDUIT Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 0.00 0.00

(ii) 1.10.3 995413 18% confirmed Group C Point 23.00 0.00 0.00 0.00 0.00

2 1.11 995413 18% confirmed Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Point 7.00 0.00 0.00 0.00 0.00

3 1.12 995413 18% confirmed Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. M 135.00 0.00 0.00 0.00 0.00

4 1.14 995413 18% confirmed Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0.00 0.00 0.00 0.00

(iii) 1.14.3 995413 18% confirmed 2 X 4 sq. mm + 1 X 4 sq. mm earth wire M 60.00 0.00 0.00 0.00 0.00

(iv) 1.14.10 995413 18% confirmed 4 X 10 sq. mm + 2 X 6 sq. mm earth wire M 50.00 0.00 0.00 0.00 0.00

7 1.19 995413 18% confirmed Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. M 62.00 0.00 0.00 0.00 0.00

6 1.21 995413 18% confirmed Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 0.00 0.00

7 1.24 995413 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

7.4 1.24.4 995413 18% confirmed 3 pin 5/6 A socket outlet EA 6.00 0.00 0.00 0.00 0.00

7.5 1.24.5 995413 18% confirmed 6 pin 15/16 A socket outlet EA 19.00 0.00 0.00 0.00 0.00

7.6 1.24.7 995413 18% confirmed TV antenna socket outlet EA 3 0.00 0.00 0.00 0.00

8 1.25 995413 18% confirmed Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. EA 9.00 0.00 0.00 0.00 0.00

9 1.26 995413 18% confirmed Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. EA 10.00 0.00 0.00 0.00 0.00

10 1.27 995413 18% confirmed Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 0.00 0.00

11 1.31 995413 18% confirmed Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. EA 5.00 0.00 0.00 0.00 0.00

12 1.32 995413 18% confirmed Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. EA 5.00 0.00 0.00 0.00 0.00

13 1.33 995413 18% confirmed Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. EA 16.00 0.00 0.00 0.00 0.00

14 1.35 995413 18% confirmed Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. EA 5.00 0.00 0.00 0.00 0.00

15 1.38 995413 18% confirmed Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. EA 2.00 0.00 0.00 0.00 0.00

16 1.39 995413 18% confirmed Providing and fixing plain 16/0.20mm (0.50sqmm) twin flat flexible, FRLS PVC insulated, copper conductor cable, in PVC sleeve of suitable size on the floor/ wall, or side of the table/ door etc. as required. M 10.00 0.00 0.00 0.00 0.00

17 1.40' 995413 18% confirmed Providing and fixing plain 16/0.20mm (0.50sqmm) twin circular flexible FRLS PVC insulated, PVC sheathed copper conductor cable direct on the wall with PVC clips etc. as required. M 10.00 0.00 0.00 0.00 0.00

18 1.41 995413 18% confirmed Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. EA 16.00 0.00 0.00 0.00 0.00

19 1.43 995413 18% confirmed Providing and fixing extra conduit down rod of 20 mm dia, 2 X 10 cm length, wiring with 2 X 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored) EA 1.00 0.00 0.00 0.00 0.00

20 1.45 995413 18% confirmed Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required EA 8.00 0.00 0.00 0.00 0.00

21 1.50 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep 0.00 0.00

22 1.51 995413 18% confirmed Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. EA 8.00 0.00 0.00 0.00 0.00

23 1.55 995413 18% confirmed Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. 0.00 0.00

24 1.57 995413 18% confirmed Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. EA 3.00 0.00 0.00 0.00 0.00

25 1.58 995413 18% confirmed Supplying and fixing PVC batten/ angle holder including connections etc. as required. EA 16.00 0.00 0.00 0.00 0.00

26 1.9.1 995413 18% confirmed Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).Powder coated die cast / Extruded aluminium Body (Thickness ≥ 1.20 mm) 18-22 W EA 20.00 0.00 0.00 0.00 0.00

27 19.10 995413 18% confirmed Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. EA 8.00 0.00 0.00 0.00 0.00

28 1.1.1 995413 18% confirmed Supplying, installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K / 6000°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C) 5 Watts EA 50.00 0.00 0.00 0.00 0.00

CHAPTER-2-MCCB, MCB & DB’S

29 2.4.3 995413 18% confirmed Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) : 8 way (4 + 24), Double door EA 1.00 0.00 0.00 0.00 0.00

30 2.5.2 995413 18% confirmed Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Double door EA 1.00 0.00 0.00 0.00 0.00

31 2.1 995413 18% confirmed Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00 0.00

31.2 2.10.2 995413 18% confirmed Single pole and neutral EA 4.00 0.00 0.00 0.00 0.00

31.3 2.10.5 995413 18% confirmed Triple pole and neutral EA 1.00 0.00 0.00 0.00 0.00

32 2.11 995413 18% confirmed Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. EA 1.00 0.00 0.00 0.00 0.00

33 2.12.2 995413 18% confirmed Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A EA 1.00 0.00 0.00 0.00 0.00

34 2.14 995413 18% confirmed Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00 0.00

Non scheduled items for electrical 0.00 0.00

1 NS 995413 18% Supply of Light Fitings 0.00 0.00

1.1 NS 995413 18% confirmed 3 W LED night lamp fixture, suitable for fixing on concealed ModularGI box EA 3.00 1.00 3.00 0.54 3.00 0.54

1.2 NS 995413 18% confirmed 0.5W LED lamps (Blue / Green) colour EA 10.00 0.00 0.00 0.00 0.00

1.3 NS 995413 18% confirmed 5W LED lamps EA 10.00 0.00 0.00 0.00 0.00

1.4 NS 995413 18% confirmed LED Bulk Head Fitting of 18W EA 10.00 0.00 0.00 0.00 0.00

1.5 NS 995413 18% confirmed Exhaust fan 250 V A.C 50 Hz,200mm (or nearest higher size) sweep, with Louvers, frame EA 8.00 0.00 0.00 0.00 0.00

1.6 NS 995413 18% confirmed Profile lights RM 100.00 0.00 0.00 0.00 0.00

1.7 NS 995413 18% confirmed 10W, LED light fitting (with T5 tube), cool white colour light EA 5.00 0.00 0.00 0.00 0.00

Extension and Modification of 03 Nos. Open Pond with Central Bore along with connection drains at Hassan SS

1 1.1.2 995413 18% confirmed Carriage of Materials by mechanical transport including loading, unloading and stacking upto 2km lead.of Earth. Cum 372.00 0.00 0.00 0.00 0.00

2 2.31 995413 18% confirmed Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. Sqm 1359.00 0.00 0.00 0.00 0.00

3 2.6.1 995413 18% confirmed Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift , as directed by Engineer-incharge.All kinds of soil Cum 371.00 0.00 0.00 0.00 0.00

4 4.1.3 995413 18% confirmed Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) Cum 1.20 0.00 0.00 0.00 0.00

5 4.1.8 995413 18% confirmed Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) Cum 27.30 0.00 0.00 0.00 0.00

6 4.3.1 995413 18% confirmed Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns Sqm 70.00 0.00 0.00 0.00 0.00

7 6.1.2 995413 18% confirmed Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 44.00 0.00 0.00 0.00 0.00

8 7.1.1 995413 18% confirmed Random Rubble Masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level:Cement mortar 1:6 (1 cement: 6 coarse sand) Cum 89.00 0.00 0.00 0.00 0.00

9 23.1.1.1 995413 18% confirmed Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. : All types of soil : 300 mm dia M 75.00 0.00 0.00 0.00 0.00

10 23.1.2.1 995413 18% confirmed Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. : All types of soil : Rocky strata includng boulders ,300 mm dia M 19.00 0.00 0.00 0.00 0.00

11 23.4.2 + Mod 995413 18% confirmed Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen 25mm dia Hole at random spacing of 200mm C/C (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. : 150 mm nominal size dia M 78.00 0.00 0.00 0.00 0.00

12 23.5 + Mod 995413 18% confirmed Supplying, filling, spreading & leveling stone boulders of size range 4.5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. Cum 2.00 0.00 0.00 0.00 0.00

13 23.6 995413 18% confirmed Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. Cum 2.00 0.00 0.00 0.00 0.00

14 23.8 995413 18% confirmed Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. (20mm Down Graded) Cum 4.00 0.00 0.00 0.00 0.00

15 23.13.2 995413 18% confirmed Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 150 mm dia EA 3.00 0.00 0.00 0.00 0.00

16 23.15.2 995413 18% confirmed Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 150 mm dia. EA 3.00 0.00 0.00 0.00 0.00

17 NS 995413 18% confirmed Providing and wrapping of Geo synthetic Non -woven filter fabric (min 150gsm) around perforated PVC Pipe , secured with nylon ties or adhesive tape, to prevent ingress of soil and foreign materials, all complete as per direction of Engineer Incharge. Sqm 72.00 0.00 0.00 0.00 0.00

Total for Civil & Electrical Portion 3.00

Total GST Tax as confirmed by Bidder 0.54

Grand Total including GST 3.54

SR2/NT/W-CIVIL/DOM/C00/25/15611--- SRTS-II/C&M/ WC-4595/2025-------RFX: 5002004922 Schedule - 2 Dis

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS As per Lum-sum 0

(SCHEDULE OF RATES AND PRICES : FREIGHT & INSURANCE CHARGES) AS per Percent #REF!

As per lum-sum on Sch-2 0.00%

Bidder’s Name and Address (Bidder) : To: As per Percent on Sch-2 #REF!

Sr.GM , Contracts & Materials Department, Total Discount #REF!

Name : Power Grid Corporation of India Ltd.,

Address : SRTS-II, RHQ

Singanayakanahalli Multipackage Discount #REF!

Bengaluru-560064

All Prices are in Indian Rupees. Amount after Discount (Rs.) Dis Alert Amount after MPD (Rs.)

SI. No. Description Unit Quantity Unit Freight & Insurance Charges Total Freight & Insurance Charges Unit Freight & Insurance Charges Total Freight & Insurance Charges Unit Freight & Insurance Charges Total Freight & Insurance Charges

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

Total F&I Price #REF!

Place : Printed Name :

SR2/NT/W-CIVIL/DOM/C00/25/15611--- SRTS-II/C&M/ WC-4595/2025-------RFX: 5002004922 Schedule - 3

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS As per Lum-sum 0.00%

(SCHEDULE OF RATES AND PRICES : ERECTION CHARGES) AS per Percent #REF!

As per lum-sum on Sch-3 0.00%

Bidder’s Name and Address (Bidder) : To: As per Percent on Sch-3 #REF!

Sr.GM , Contracts & Materials Department, Total Discount #REF!

Name : Power Grid Corporation of India Ltd.,

Address : SRTS-II, RHQ

Singanayakanahalli Multipackage lum-sum #REF!

Bengaluru-560064

All Prices are in Indian Rupees. Amount after Discount (Rs.) Dis Alert Amount after MPD (Rs.)

SI. No. Description Unit Quantity Unit Erection Charges Total Erection Charges Unit Erection Charges Total Erection Charges Unit Erection Charges Total Erection Charges

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! (a) Detailed Soil Investigation

#REF! #REF! #REF! #REF! #REF! (b) All kinds of soil except fissured rock & hard rock

#REF! #REF! #REF! #REF! #REF! (e) River Crossing Location

#REF! #REF! #REF! #REF! #REF! (f)

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

Total Erection Price (A+B) #REF!

Place : Printed Name :

SR2/NT/W-CIVIL/DOM/C00/25/15611--- SRTS-II/C&M/ WC-4595/2025-------RFX: 5002004922 Schedule - 4

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

(SCHEDULE OF RATES AND PRICES )

Bidder’s Name and Address (Bidder) : To:

Sr.GM , Contracts & Materials Department,

Name : Power Grid Corporation of India Ltd.,

Address : SRTS-II, RHQ

Singanayakanahalli

Bengaluru-560064

TOTAL TRAINING CHARGES 0.00

Date : -- Printed Name :

Place : Designation :

SR2/NT/W-CIVIL/DOM/C00/25/15611--- SRTS-II/C&M/ WC-4595/2025-------RFX: 5002004922 Schedule - 5

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

(SUMMARY OF TAXES & DUTIES APPLICABLE ON PLANT & EQUIPMENT)

Bidder’s Name and Address (Bidder) : To:

Sr.GM , Contracts & Materials Department,

Name : Power Grid Corporation of India Ltd.,

Address : SRTS-II, RHQ

Singanayakanahalli

Bengaluru-560064

Sl. No. Item Nos. Total Price (INR) After Discount After MPDiscount

1 TOTAL GST ON Service Excise Duty #REF! Excise Duty #REF!

Total GST for Supply of Services between the Contractor and the Employer (identified in Schedule 1') which are not included in the Unit price as per the provision of the Bidding Documents, as applicable. 0.54

2 TOTAL GST ON GOODS

Total GST on AMC charges

Date : --2025 Printed Name :

Place : Designation :

SR2/NT/W-CIVIL/DOM/C00/25/15611--- SRTS-II/C&M/ WC-4595/2025-------RFX: 5002004922 Schedule - 5

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

SUMMARY OF TAXES & DUTIES APPLICABLE ON GOODS

Bidder’s Name and Address (Bidder) : To:

Sr.GM , Contracts & Materials Department,

Name : Power Grid Corporation of India Ltd.,

Address : SRTS-II, RHQ

Singanayakanahalli

Bengaluru-560064

Sl. No. Item Nos. Total Price (INR)

1 TOTAL GST ON GOODS #REF!

Total GST for Supply of Goods (inter-alia including Type Test Charges) between the Contractor and the Employer (identified in Schedule 1') which are not included in the Ex-works price as per the provision of the Bidding Documents, as applicable.

2 TOTAL GST ON SERVICES #REF!

Total GST on Installation Services (Schedule-3) and Training to be imparted in India (Schedule-4)

GRAND TOTAL [1+2] #REF!

Date : --2025 Printed Name :

Place : Designation :

SR2/NT/W-CIVIL/DOM/C00/25/15611--- SRTS-II/C&M/ WC-4595/2025-------RFX: 5002004922 Schedule - 6

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS

(GRAND SUMMARY)

Bidder’s Name and Address (Bidder) : To:

Sr.GM , Contracts & Materials Department,

Name : Power Grid Corporation of India Ltd.,

Address : SRTS-II, RHQ

Singanayakanahalli

Bengaluru-560064

Sl. No. Description Total Price (INR)

1 TOTAL SCHEDULE NO. 1 0.00

Ex-works price of Plant and Equipment

2 TOTAL SCHEDULE NO. 2 0.00

RATES AND PRICES : FREIGHT & INSURANCE CHARGES

1 TOTAL SCHEDULE NO. 3 3.00

Service/ Installation

2 TOTAL SCHEDULE NO. 5 0.54

6 TOTAL SCHEDULE NO. 7 0.00

Type Test Charges [Total of this Schedule is included in Schedule - 1 above.]

GRAND TOTAL [1+2] 3.54

Date : --2025 Printed Name :

Place : Designation :

SR2/NT/W-CIVIL/DOM/C00/25/15611--- SRTS-II/C&M/ WC-4595/2025-------RFX: 5002004922 Schedule 7

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS As per Lum-sum 0.00%

(SCHEDULE OF RATES AND PRICES ) AS per Percent #REF!

As per lum-sum on Sch-7 0.00%

Bidder’s Name and Address (Bidder) : To: As per Percent on Sch-7 #REF!

Sr.GM , Contracts & Materials Department, Total Discount #REF!

Name : Power Grid Corporation of India Ltd.,

Address : SRTS-II, RHQ

Singanayakanahalli Multipackage Discount #REF!

Bengaluru-560064

Type test Charges

SL. NO. Description of Test Unit Quantity Unit Test Charge Total Test Charges (Rs.) #REF! Total Test Charges After Discount (Rs.) Dis Alert Total Test Charges After MPD (Rs.)

TOTAL TYPE TEST CHARGES 0.00

Dis Alert #REF!

Date : --2025 Printed Name :

Place : Designation :

Note : Bidder should indicate the name of test laboratories where type tests are proposed to be conducted

SR2/NT/W-CIVIL/DOM/C00/25/15611--- SRTS-II/C&M/ WC-4595/2025-------RFX: 5002004922

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS 0 0 0

(SCHEDULE OF RATES AND PRICES ) 0 0 0

Bidder’s Name and Address (Bidder) : 0

SL. NO. Description of Test 0

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

SR2/NT/W-CIVIL/DOM/C00/25/15611--- SRTS-II/C&M/ WC-4595/2025-------RFX: 5002004922

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS As per Lum-sum 0.00%

(SCHEDULE OF RATES AND PRICES : TYPE TEST CHARGES) AS per Percent #REF!

As per lum-sum on Sch-7 0.00%

Bidder’s Name and Address (Bidder) : To: As per Percent on Sch-7 #REF!

Sr.GM , Contracts & Materials Department, Total Discount #REF!

Name : Power Grid Corporation of India Ltd.,

Address : SRTS-II, RHQ

Singanayakanahalli Multipackage Discount #REF!

Bengaluru-560064

Type Tests on Earthwire

SL. NO. Description of Test Unit Quantity Unit Test Charge Total Test Charges (Rs.) Total Test Charges After Discount (Rs.) Dis Alert Total Test Charges After MPD (Rs.)

(a) #REF! #REF! #REF! #REF! #REF!

(b) #REF! #REF! #REF! #REF! #REF!

Sub-Total (I) #REF!

TOTAL TEST CHARGES (I) #REF!

Discount Sche-7 #REF! MPD Sche-7 #REF!

Dis Alert #REF!

Date : --2025 Printed Name :

Place : Designation :

Note : Bidder should indicate the name of test laboratories where type tests are proposed to be conducted

SR2/NT/W-CIVIL/DOM/C00/25/15611--- SRTS-II/C&M/ WC-4595/2025-------RFX: 5002004922

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS 0 0 0

(SCHEDULE OF RATES AND PRICES : TYPE TEST CHARGES) 0 0 0

Bidder’s Name and Address (Bidder) : 0

SL. NO. Description of Test 0

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

Details of Octroi

Sl No. Description of Items Amount on which Octroi is applicable Rate of Octroi Octroi

Details of Entry Tax

Sl No. Description of Items Amount on which Entry Tax is applicable Rate of Entry Tax Entry Tax

Details of Other Taxes & Duties

Sl No. Description of Items Amount on which Other Taxes & Duties are applicable Description of Taxes & Duties Rate of Taxes & Duties Amount of Taxes & Duties

SR2/NT/W-CIVIL/DOM/C00/25/15611--- SRTS-II/C&M/ WC-4595/2025-------RFX: 5002004922 Bid Form Sole Bidder 1 st 1 January

0 2 nd 2 February

BID FORM (Price bid) 3 rd 3 March

Bid Proposal Ref. No. 5 th 5 May

Date : --2025 6 th #VALUE! 6 June

7 th #VALUE! 7 July

To: 8 th #VALUE! 8 August

Sr.GM , Contracts & Materials Department, 9 th #VALUE! 9 September

Power Grid Corporation of India Ltd., 10 th 10 October

SRTS-II, RHQ 11 th 11 November

Singanayakanahalli 12 th 12 December

Bengaluru-560064 13 th

Name of Contract : Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS 15 th

Dear Ladies and/or Gentlemen, 16 th

Schedule 1 Plant and Equipment 21 st

Schedule 2 Local Transportation, In-transit Insurance, loading and unloading 22 th

Schedule 4 Training charges for training to be imparted. 24 th

Schedule 5 Taxes and Duties not included in Schedule 1 25 th

Schedule 6 Grand Summary [Schedule 1to 5] 26 th

Schedule 7 Break-up of Type Test Charges for Type Tests to be conducted 27 th

2.5 We declare that items left blank in the Schedules will be deemed to have been included in other items. The TOTAL for each Schedule and the TOTAL of Grand Summary shall be deemed to be the total price for executing the Facilities and sections thereof in complete accordance with the Contract, whether or not each individual item has been priced. 31 st

3.0 We confirm that except as otherwise specifically provided our Bid Prices in this Second Envelope include all taxes, duties, levies and charges as may be assessed on us/our Associate (applicable for Foreign Bidder), our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.

3.1 100% of applicable Taxes and Duties i.e GST, which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.

3.3 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.

4.0 # (For Joint Venture only) We, the partners of Joint Venture submitting this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the Contract in accordance with Contract terms and conditions.

5.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

Thanking you, we remain,

Yours faithfully,

For and on behalf of

Date : --2025 Printed Name :

Place : Designation :

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.

STATEMENT OF QUOTED / CORRECTED PRICES

All Figures are in Rupees

Sl. No. Price Component Quoted Price Corrected Price

1 TOTAL SCHEDULE NO. 1:Ex-Works Price of Plant and Equipment including Type Test Charges 0.00 0.00

2 TOTAL SCHEDULE NO.2: Local Transportation, Insurance and other Incidental Services. 0.00 0.00

3 TOTAL SCHEDULE NO.3: Installation Charges #REF! #REF!

4 TOTAL SCHEDULE NO.4: Training Charges Not Applicable Not Applicable

5 TOTAL BID PRICE: (Excluding Taxes & Duties) #REF! #REF!

6 DISCOUNT #REF! #REF! #REF!

7 NET BID PRICE (Excluding Taxes & Duties) #REF! #REF!

8 TAXES & DUTIES PAYABLE ADDITIONALLY

A) EXCISE DUTY #REF! 0.00

B) CENTRAL SALES TAX #REF! 0.00

C) VAT #REF! 0.00

D) ENTRY TAX / OCTROI #REF! 0.00

F) TOTAL TAXES & DUTIES #REF! 0.00

8 TOTAL BID PRICE (INCLUDING TAXES & DUTIES) #REF! #REF!

9 TOTAL SCHEDULE NO.7: Type Test Charges [Total of this Schedule is included in Schedule-1 above] 0.00 0.00

I) Bidder has indicated the following taxes and duties additionally applicable for their bid:

#REF! Excise Duty #REF! #REF!

#REF! CST #REF! #REF!

#REF! VAT #REF! #REF!

#REF! Entry Tax/ Octroi #REF! #REF!

Others as Others

II) With regard to Entry Tax, it may be mentioned that the substations covered under the subject pacakge falls in State of MP, where an entry tax @ 2% of Purchase Price is applicable. In view of the above, the taxes and duties inter-alia including entry tax applicable for the bids are calculated :

a) Ex-Works Price of Direct Supplies (after discount, if any) Rs. 0

b) Excise Duty, as applicable on (a) above at the rate : 10.00% Rs. 0

c) Amount on which Sales Tax is applicable 0.00 0

d) CST, as applicable on (a) + ED (b) above at the rate : 2.00% Rs. 0

e) VAT, as applicable on (a) + ED (b) above at the rate : 1.00% 0

g) Purchase Price for Entry Tax (Total Ex-Works+F&I+ED+CST+Others) Rs. 0

h) Entry Tax, as applicable on (e) above at the rate : Rs. 0.00

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS Statement of Quoted / Corrected Prices Page

Spec. No. SR2/NT/W-CIVIL/DOM/C00/25/15611--- SRTS-II/C&M/ WC-4595/2025-------RFX: 5002004922

STATEMENT OF QUOTED / CORRECTED PRICES

All Figures are in Rupees

Sl. No. Price Component Quoted Price Corrected Price

1 TOTAL SCHEDULE NO. 1:Ex-Works Price of Plant and Equipment including Type Test Charges 0.00 0.00

2 TOTAL SCHEDULE NO.2: Local Transportation, Insurance and other Incidental Services. 0.00 0.00

3 TOTAL SCHEDULE NO.3: Installation Charges #REF! #REF!

4 TOTAL SCHEDULE NO.4: Training Charges Not Applicable Not Applicable

5 TOTAL BID PRICE: (Excluding Taxes & Duties) #REF! #REF!

6 DISCOUNT #REF! #REF!

7 NET BID PRICE (Excluding Taxes & Duties) #REF! #REF!

8 TAXES & DUTIES PAYABLE ADDITIONALLY

A) EXCISE DUTY #REF! #REF!

B) CENTRAL SALES TAX /VAT #REF! #REF!

C) ENTRY TAX / OCTROI #REF! #REF!

D) OTHERS #REF! 0.00

E) TOTAL TAXES & DUTIES #REF! #REF!

8 TOTAL BID PRICE (INCLUDING TAXES & DUTIES) #REF! #REF!

9 TOTAL SCHEDULE NO.7: Type Test Charges [Total of this Schedule is included in Schedule-1 above] 0.00 0.00

I) Bidder has indicated the following taxes and duties additionally applicable for their bid:

a) Excise Duty Rs. #REF!

b) CST /VAT Rs. #REF!

c) Entry Tax / Octroi Rs. #REF!

d) Others Rs. #REF!

II) Bidder has offered following discount(s)

III) With regard to Entry Tax, it may be mentioned that the substations covered under the subject pacakge falls in State of MP, where an entry tax @ 1% of Purchase Price is applicable. In view of the above, the taxes and duties inter-alia including entry tax applicable for the bids are calculated : Details of dicounts

a) Ex-Works Price of Direct Supplies (after discount, if any) Rs. #REF! Gross LS #REF! #REF! #REF! Gross % #REF! #REF! #REF!

b) Excise Duty @ 10.3% of (a) above Rs. #REF! #REF! #REF!

c) CST / VAT @ 2% of Ex-Works of Direct Supplies (a) + ED (b) above Rs. #REF! Sch-1 Direct LS #REF! #REF! #REF! Sch-1 Direct % #REF! #REF! #REF!

d) Others Rs. Sch-1 BO LS #REF! #REF! #REF! Sch-1 BO % #REF! #REF! #REF!

e) Purchase Price for Entry Tax (Total Ex-Works+F&I+ED+CST+Others) Rs. #REF! Sch-2 LS #REF! #REF! #REF! Sch-2 % #REF! #REF! #REF!

f) Entry Tax @ 1% of (e) above Rs. #REF! Sch-3 LS #REF! #REF! #REF! Sch-3 % #REF! #REF! #REF!

Sch-7 LS #REF! #REF! #REF! Sch-7 % #REF! #REF! #REF!

Expansion and renovation of Composite Building cum Guest House at 400/220 kV Hassan Substation and Construction of 03 Nos of Open Pond with central bore along with drainage from existing recharge wells to open pond at Hassan SS Statement of Quoted / Corrected Prices Page Different Manner #REF!

Text for Discount #REF!

23 Twenty Three

27 Twenty Seven

28 Twenty Eight

33 Thirty Three

37 Thirty Seven

38 Thirty Eight

73 Seventy Three

74 Seventy Four

75 Seventy Five

77 Seventy Seven

78 Seventy Eight

79 Seventy Nine

83 Eighty Three

87 Eighty Seven

88 Eighty Eight

93 Ninety Three

97 Ninety Seven

98 Ninety Eight

100 One Hundred