Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.7 LAccepted-AOC GUDSATHU BUDGAM KASHMIR 191111 J K | BUDGAM | BUDGAM | JAMMU AND KASHMIR | 191111 | L1 | Accepted-AOC being L1. | |
| 2 | L2₹26.8 L+₹28,545 (1.08%)Rejected-Finance 00 BACHUAPAR RAJESULTANPUR ALAPUR AMBEDKAR NAGAR UTTAR PRADESH 224176 | AMBEDKAR NAGAR | UTTAR PRADESH | 224176 | L2 | Rejected-Finance Other than L1. |
Tender Value
₹24.4 L
EMD Value
₹48,820
Closing Date
3 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE, HQ 134 Wks Engr
HQ 134 Wks Engrs PIN-914134 C/o 56 APO
SPECIAL REPAIR TO P-14 OH 50,000 GALLONS CAPACITY LOCATED IN SHALTENG GRN UNDER AGE (I) CIF (K).
2022_MES_562122_2
134 WE-59(T)/2022-23
Open Tender
Civil Works
Item Rate
180 days
Srinagar
9 documents required · 9 mandatory
₹500
AGE (I) CIF (K)
₹48,820
Yes
16 Mar 2023
8 Dec 2022
5 Jan 2023
8 Dec 2022
3 Jan 2023
15 Dec 2022
Amount
Demolition of RCC roofs, floors, (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, complete all as specified and directed.
M&L for RCC M-30 Grade (Design Mix) as in domes, vaults, shell roofs, arch ribs and folded plates etc, complete all as specified and directed.
Formwork to rough finished surfaces of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.
Formwork to edges of rough finshed surfaces of concrete of flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide, complete all as specified and directed.
M&L for TMT mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
M&L for TMT mild steel bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends, stirrups, spacers etc and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
S&F welded steel febric, weight not exc 4 Kg per Sqm, fixed complete to wood or steel member, complete all as specified and directed.
M&L for 50mm thick RCC with IWPC @ 200 ml/Bag of cement, shortcreting by pumpcrete mechine capacity 30 mtr of lifting height, with high pressure spraying on vertical surfaces using 10mm graded crushed stone aggregate including of min flexural strength 40 kg/Sqcm in field using 450 Kg/Cum cement content as design mix (M-40 Grade) including finished the surface by using extra cement of concrete, complete all as specified and directed. Note :- Supply and mixing of IWPC is inclusive in quoted rate.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
M&L for mild steel work in stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets etc, confirming to Fe-410-W (Gde-E-250) Quality-'B' and distance pieces, cleats plate etc including required welding as per relevent IS, complete all as specified and directed.
M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
Taking down cement plaster on stone wall/ brick wall including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4, finished the surface even and smooth without using extra cement, complete all as specified and directed. Note : The plastering work will be carried out upto 21 Mtr height.
M&L for preparing new plastered surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.
M&L for complete removal of existing treatment and preparing old plastered or unplastered surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.
M&L for preparation of plastered surface of walls and applying 2mm thick POP putty (plaster of paris), finished the surface even and smooth, complete all as specified and directed.
Demolition of cement concrete unreinforced (including floor tiles if any) in ground floors and pavings not exc 15cm thickness (below or above ground level), complete all as specified and directed.
M&L for 100mm thick PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in floors, finished the surface even and smooth without using extra cement, complete all as specified and directed.
Dismantling unserviceable CI pipe line 150mm bore flanged type, vertical from OH tank upto 21 Mtr height, complete all as specified and directed.
Dismantling unserviceable CI pipe line 100mm bore flanged type, vertical from OH tank upto 21 Mtr height, complete all as specified and directed.
S&F cast iron pipe both ends flaged and drilled, centrifugally cast, class B, including gaskets, nuts, bolts and jointing complete for 150mm bore in any length in vertical position for OH tank upto 21 mtr height, complete all as specified and directed.
S&F cast iron pipe both ends flaged and drilled, centrifugally cast, class B, including gaskets, nuts bolts and jointing complete for 100mm bore in any length in vertical position for OH tank upto 21 mtr height, complete all as specified and directed.
S&F 150mm bore CI sluice valve PN 1.6 flanged, complete with iron wheel head and spindle including flanged joints, complete all as specified and directed.
S&F 100mm bore CI sluice valve PN 1.6 flanged, complete with iron wheel head and spindle including flanged joints, complete all as specified and directed.
M&L for cast iron bends, tapers, tee pieces (single & double branch) any type and angle/radius and straight connecting pieces but all ends flanged for 150mm bore CI pipe, complete all as specified and directed.
Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.5 mtr deep in soft/loose soil and getting out for laying of GI/CI pipes, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed.
Removing excavated material (soil) to a distance not exc. 50mtr and depositing where directed to a level not exc. 1.50 mtr above starting point, complete all as specified and directed.
M&L for construction of brick masonry valve pit of size 1200mm x 1200mm x 1200mm (internal dimensions) with brick work (old size bricks), built in CM (1:4) including excavation and earth work complete with 3mm thick MS sheet cover and MS angle iron frame (size of angle 40 x 40 x 6mm) with two coats of synthetic enamel paint over a coat of red oxide primer and including locking arrangement, hinges and handle and 15mm thick rendering in CM 1:4 with using WPC and applying two coats of synthetic enamel paint after preparation of surfaces, complete all as specified and directed.
SB ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .