Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.3 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹36.4 L+₹1.3 L (3.84%)Rejected-Finance | L2 | Rejected-Finance HIGHER THAN L1 BIDDER | |
| 3 | L3₹42.5 L+₹7.4 L (21.3%)Rejected-Finance | L3 | Rejected-Finance HIGHER THAN L1 BIDDER | |
| 4 | L4₹48.8 L+₹13.7 L (39.2%)Rejected-Finance 107 74 JAWAHAR NAGAR KANPUR NAGAR UTTAR PRADESH 208012 | KANPUR NAGAR | UTTAR PRADESH | 208012 | L4 | Rejected-Finance HIGHER THAN L1 BIDDER | |
| 5 | L5₹54.2 L+₹19.2 L (54.8%)Rejected-Finance | L5 | Rejected-Finance HIGHER THAN L1 BIDDER |
| Sl No | Description | Qty | Unit | Star Sofa House L4 | GUJRAL BUILDERS L1 | m/s tripurari enterprises L5 | ANAND FURNITURE L2 | Avinash Enterprises L3 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Chair Dining FD-1105/279
(a) Removal of following existing unserviceable wooden components of various MES F/DB/FD/MAP/TP/SPL furniture items or similar items carefully without distrubing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, providing hinges, placing everypart in-tact the disturbed portion, as applicable as per drgs and as directed by EIC.
(b) Work will be executed where the furniture exist in different under units of GE (I) Kanpur Cantt including BSO's Furniture Yard as directed by EIC.
(c) Timber Shall be 2nd class teak wood seasoned. CRCA section/CRCA sheet shall be used in repair/maint of steel furniture.
(i) Rear leg | 400 | Each | 70 ₹28,000 | 65 ₹26,000 | 60 ₹24,000 | 35 ₹14,000 Lowest | 350 ₹1,40,000 |
| 2.00 | (ii) Front leg | 300 | Each | 50 ₹15,000 | 47 ₹14,100 | 60 ₹18,000 | 30 ₹9,000 Lowest | 35 ₹10,500 |
| 3.00 | (iii) Rear/front/side rail | 500 | Each | 50 ₹25,000 | 38 ₹19,000 | 90 ₹45,000 | 35 ₹17,500 | 25 ₹12,500 Lowest |
| 4.00 | (iv) Stiffener | 500 | Each | 40 ₹20,000 | 20 ₹10,000 | 50 ₹25,000 | 15 ₹7,500 Lowest | 23 ₹11,500 |
| 5.00 | (v) Back rest | 300 | Each | 50 ₹15,000 | 20 ₹6,000 Lowest | 50 ₹15,000 | 30 ₹9,000 | 85 ₹25,500 |
| 6.00 | (vi) S&F recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one complete all as specified and directed. | 1,500 | Each | 125 ₹1,87,500 | 110 ₹1,65,000 Lowest | 150 ₹2,25,000 | 140 ₹2,10,000 | 150 ₹2,25,000 |
| 7.00 | (vii) M&L for melamine polish with spray machine after removing of existing polish by scapping and smothening of surface wherever required or as directed by EIC to the following furniture articles all are of MES pattern viz F/DB/FD/MAP/spl type series or similar items incl applying wac for depressed surface as well as washing with caustic soda wherever required before polishng complete all as specified and shown on drg and as directed by EIC. | 1,500 | Each | 40 ₹60,000 | 47 ₹70,500 | 100 ₹1,50,000 | 35 ₹52,500 Lowest | 45 ₹67,500 |
| 8.00 | Chair Easy FD-1108/229
(a) Removal of following existing unserviceable wooden components of various MES F/DB/FD/MAP/TP/SPL furniture items or similar items carefully without distrubing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, providing hinges, placing everypart in-tact the disturbed portion, as applicable as per drgs and as directed by EIC.
(b) Work will be executed where the furniture exist in different under units of GE (I) Kanpur Cantt including BSO's Furniture Yard as directed by EIC.
(c) Timber Shall be 2nd class teak wood seasoned. CRCA section/CRCA sheet shall be used in repair/maint of steel furniture.
(i) Rear leg | 50 | Each | 65 ₹3,250 | 65 ₹3,250 | 50 ₹2,500 | 35 ₹1,750 Lowest | 45 ₹2,250 |
| 9.00 | (ii) Front leg | 60 | Each | 60 ₹3,600 | 47 ₹2,820 | 60 ₹3,600 | 35 ₹2,100 Lowest | 45 ₹2,700 |
| 10.00 | (iii) Arms | 50 | Each | 60 ₹3,000 | 38 ₹1,900 | 60 ₹3,000 | 30 ₹1,500 Lowest | 45 ₹2,250 |
Tender Value
₹48.9 L
EMD Value
₹97,800
Closing Date
1 Aug 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL VISHAL BHURIA
GE I Kanpur Cariappa Road Cantt Kanpur 208004
REPAIR/MAINT/RECANNING AND POLISHING OF WOODEN AND MISC FURNITURE AND FIXING PLY CHARPOY AND BED HARD UNDER GE (I) KANPUR
2025_MES_718433_1
GE(I)/KAN/T-39 OF 2025-26
Open Tender
Civil Works - Others
Item Rate
180 days
KANPUR
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE(I) KANPUR
₹97,800
Yes
7 Oct 2025
4 Jul 2025
8 Aug 2025
4 Jul 2025
1 Aug 2025
18 Jul 2025
Amount
Chair Dining FD-1105/279 (a) Removal of following existing unserviceable wooden components of various MES F/DB/FD/MAP/TP/SPL furniture items or similar items carefully without distrubing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, providing hinges, placing everypart in-tact the disturbed portion, as applicable as per drgs and as directed by EIC. (b) Work will be executed where the furniture exist in different under units of GE (I) Kanpur Cantt including BSO's Furniture Yard as directed by EIC. (c) Timber Shall be 2nd class teak wood seasoned. CRCA section/CRCA sheet shall be used in repair/maint of steel furniture. (i) Rear leg
(ii) Front leg
(iii) Rear/front/side rail
(iv) Stiffener
(v) Back rest
(vi) S&F recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one complete all as specified and directed.
(vii) M&L for melamine polish with spray machine after removing of existing polish by scapping and smothening of surface wherever required or as directed by EIC to the following furniture articles all are of MES pattern viz F/DB/FD/MAP/spl type series or similar items incl applying wac for depressed surface as well as washing with caustic soda wherever required before polishng complete all as specified and shown on drg and as directed by EIC.
Chair Easy FD-1108/229 (a) Removal of following existing unserviceable wooden components of various MES F/DB/FD/MAP/TP/SPL furniture items or similar items carefully without distrubing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, providing hinges, placing everypart in-tact the disturbed portion, as applicable as per drgs and as directed by EIC. (b) Work will be executed where the furniture exist in different under units of GE (I) Kanpur Cantt including BSO's Furniture Yard as directed by EIC. (c) Timber Shall be 2nd class teak wood seasoned. CRCA section/CRCA sheet shall be used in repair/maint of steel furniture. (i) Rear leg
(ii) Front leg
(iii) Arms
(iv) Front/back/Side rail of seat as to match with the existing, made of shisham wood complete all as specified and directed.
(v) S&F recanning seat & back in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one complete all as specified and directed.
(vi) M&L for melamine polish with spray machine after removing of existing polish by scapping and smothening of surface wherever required or as directed by EIC to the following furniture articles all are of MES pattern viz F/DB/FD/MAP/spl type series or similar items incl applying wac for depressed surface as well as washing with caustic soda wherever required before polishng all as specified and shown on drg and as directed by EIC.
Chair writing FD-202/ 250/280 S&F new components of 2nd class HW (shisham) including dismantling unservicable one complete all as specified and directed. (a) Rear leg
(b) Front leg
(c) Rear/front/Side rail
(d) Arms.
(e) Back rest
(f) Stiffener
(g) S&F recanning seat & back of the chair and recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one complete all as specified and directed.
(h) M&L for melamine polish with spray machine after removing of existing polish by scapping and smothening of surface wherever required or as directed by EIC to the following furniture articles all are of MES pattern viz F/DB/FD/MAP/spl type series or similar items incl applying wac for depressed surface as well as washing with caustic soda wherever required before polishng all as specified and shown on drg and as directed by EIC.
Bed plywood top FD-245 & 246 S&F new components comprising of following outer member made of shisham wood and internal frame made of cheer wood, covered both sides of board with 3.5 mm thick OST plywood with 12mm thick half cut teak wood beading including dismantling unservicable one complete all as specified and directed. (a) Head board
(b) Foot board
(c) S&F new teak plywood of head board on both sides along with 30mm x 6mm teakwood beading on top including dismantling unserviceable one complete all as specified and directed.
(d) S&F new teak plywood of foot board on both sides along with 30mm x 6mm teakwood beading on top including dismantling unserviceable one complete all as specified and directed.
(e) S&F new components of 2nd class HW (shisham) including dismantling unservicable one complete all as specified and directed. (a) Long rail of size 90 x 35 mm
(f) Stiffner of size 60 x 40 mm
(g) Wooden bracket (corner)
(h) S&F top made of 12mm BWR phenol bonded commercial plywood with suitable screws including dismantling unservicable one complete all as specified and directed.
(j) preparation of the surfaces by throughly rubbing with emery paper both surfaces of the head board, foot board including legs and long rails and polishing with french polish two coats to obtain a glossy finish complete all as specified and directed.
Table dining for 08 persons FD-30(M)/ 273 & 239 (a) Removal of following existing unserviceable wooden components of various MES F/DB/FD/MAP/TP/SPL furniture items or similar items carefully without distrubing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, providing hinges, placing everypart in-tact the disturbed portion, as applicable as per drgs and as directed by EIC. (b) Work will be executed where the furniture exist in different under units of GE (I) Kanpur Cantt including BSO's Furniture Yard as directed by EIC. (c) Timber Shall be 2nd class teak wood seasoned. CRCA section/CRCA sheet shall be used in repair/maint of steel furniture. (i) Leg
(ii) Top rail (long/front)
(iii) Top rail (short/side)
(iv) Top 18mm thick prelaminated HDHMR board BSL (Make: Century Ply/Green/Archid Ply/Action Tesa) with 0.8 mm thick PVC edging and laminated in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine all as specified in drg and as directed by Engr-in-Charge.
(v) M&L for melamine polish with spray machine after removing of existing polish by scapping and smothening of surface wherever required or as directed by EIC to the following furniture articles all are of MES pattern viz F/DB/FD/MAP/spl type series or similar items incl applying wac for depressed surface as well as washing with caustic soda wherever required before polishng all as specified and shown on drg and as directed by EIC.
Table dining for 06 persons FD-30(M)/ 273 & 239 (a) Removal of following existing unserviceable wooden components of various MES F/DB/FD/MAP/TP/SPL furniture items or similar items carefully without distrubing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, providing hinges, placing everypart in-tact the disturbed portion, as applicable as per drgs and as directed by EIC. (b) Work will be executed where the furniture exist in different under units of GE (I) Kanpur Cantt including BSO's Furniture Yard as directed by EIC. (c) Timber Shall be 2nd class teak wood seasoned. CRCA section/CRCA sheet shall be used in repair/maint of steel furniture. (i) Leg
(ii) Top rail (long/front)
(iii) Top rail (short/side)
(iv) Top 18mm thick prelaminated HDHMR board BSL (Make: Century Ply/Green/Archid Ply/Action Tesa) with 0.8 mm thick PVC edging and laminated in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine all as specified in drg and as directed by Engr-in-Charge.
(v) M&L for melamine polish with spray machine after removing of existing polish by scapping and smothening of surface wherever required or as directed by EIC to the following furniture articles all are of MES pattern viz F/DB/FD/MAP/spl type series or similar items incl applying wac for depressed surface as well as washing with caustic soda wherever required before polishng all as specified and shown on drg and as directed by EIC.
Teapoy FD-382/ 232 & 278 Top 18mm thick prelaminated HDHMR board BSD (Make-Century ply/Green ply/Archid ply/Action tesa) with 0.8 mm thick PVC edging and colour/shade as approved by Engineer-in-Chief. (a) Leg
(b) Top rail (long/front)
(c) Top rail (short/side)
(d) Stiffener
(e) Top 18mm thick prelaminated HDHMR board BSL (Make: Century Ply/Green/Archid Ply/Action Tesa) with 0.8 mm thick PVC edging and laminated in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine all as specified in drg and as directed by Engr-in-Charge.
(f) M&L for melamine polish with spray machine after removing of existing polish by scapping and smothening of surface wherever required or as directed by EIC to the following furniture articles all are of MES pattern viz F/DB/FD/MAP/spl type series or similar items incl applying wac for depressed surface as well as washing with caustic soda wherever required before polishng all as specified and shown on drg and as directed by EIC.
Table centre FD-274 & 235 (a) Removal of following existing unserviceable wooden components of various MES F/DB/FD/MAP/TP/SPL furniture items or similar items carefully without distrubing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, providing hinges, placing everypart in-tact the disturbed portion, as applicable as per drgs and as directed by EIC. (b) Work will be executed where the furniture exist in different under units of GE (I) Kanpur Cantt including BSO's Furniture Yard as directed by EIC. (c) Timber Shall be 2nd class teak wood seasoned. CRCA section/CRCA sheet shall be used in repair/maint of steel furniture. (i) Leg
(ii) Top rail (long/front)
(iii) Top rail (short/side)
(iv) Stiffener
(v) Top 18mm thick prelaminated HDHMR board BSL (Make: Century Ply/Green/Archid Ply/Action Tesa) with 0.8 mm thick PVC edging and laminated in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine all as specified in drg and as directed by Engr-in-Charge.
(vi) M&L for melamine polish with spray machine after removing of existing polish by scapping and smothening of surface wherever required or as directed by EIC to the following furniture articles all are of MES pattern viz F/DB/FD/MAP/spl type series or similar items incl applying wac for depressed surface as well as washing with caustic soda wherever required before polishng all as specified and shown on drg and as directed by EIC.
Table Peg FD- 277 & 236/384 (a) Removal of following existing unserviceable wooden components of various MES F/DB/FD/MAP/TP/SPL furniture items or similar items carefully without distrubing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, providing hinges, placing everypart in-tact the disturbed portion, as applicable as per drgs and as directed by EIC. (b) Work will be executed where the furniture exist in different under units of GE (I) Kanpur Cantt including BSO's Furniture Yard as directed by EIC. (c) Timber Shall be 2nd class teak wood seasoned. CRCA section/CRCA sheet shall be used in repair/maint of steel furniture. (i) Leg
(ii) Top rail (long/front)
(iii) Top rail (short/side)
(iv) Stiffener
(v) Top 18mm thick prelaminated HDHMR board BSL (Make: Century Ply/Green/Archid Ply/Action Tesa) with 0.8 mm thick PVC edging and laminated in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine all as specified in drg and as directed by Engr-in-Charge.
(vi) M&L for melamine polish with spray machine after removing of existing polish by scapping and smothening of surface wherever required or as directed by EIC to the following furniture articles all are of MES pattern viz F/DB/FD/MAP/spl type series or similar items incl applying wac for depressed surface as well as washing with caustic soda wherever required before polishng all as specified and shown on drg and as directed by EIC.
Table writing FD-249 & 275 (a) Removal of following existing unserviceable wooden components of various MES F/DB/FD/MAP/TP/SPL furniture items or similar items carefully without distrubing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, providing hinges, placing everypart in-tact the disturbed portion, as applicable as per drgs and as directed by EIC. (b) Work will be executed where the furniture exist in different under units of GE (I) Kanpur Cantt including BSO's Furniture Yard as directed by EIC. (c) Timber Shall be 2nd class teak wood seasoned. CRCA section/CRCA sheet shall be used in repair/maint of steel furniture. (i) S&F new components of 2nd class HW (shisham) including dismantling unservicable one complete all as specified and directed.
(ii) Leg (long)
(iii) Leg (short)
(iv) Side/bottom rail
(v) Back made out of 6 mm thick plywood commercial including dismantling unserviceable one complete all as specified and directed.
(vi) Side made out of 18 mm thick Pre-laminated MDF board one side laminated finish including dismantling unserviceable one all as specified and as
(vii) Stiffner (long)
(viii) Top made out of 18mm thick prelaminated HDHMR board BSL (Make: Century Ply/Green/Archid Ply/Action Tesa) with 0.8 mm thick PVC edging and laminated in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine all as specified in drg including provision of knob including dismantling unserviceable one complete all as specified and directed. Note :- Knob shall be be aluminium anodised (Dark Brown) chromium plated of approved size and quality
(ix) Complete cupboard including drawer from the table writing and made of 18 mm thick pre-laminated HDHMR board BSL (Make: Century Ply/Green/Archid Ply/Action Tesa) including back provided with 6mm thick commercial plywood including dismantling unserviceable one complete all as specified and directed. Note :- (a) Knob shall be aluminium anodized (dark brown chromium plated of approved size & quality). (b) Hinges shall be 50 mm of approved quality.
(x) Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and directed.
Hat Stand (FD-361/362) (a) S&F 4mm thick teak face Ply to make front side along with teak wood edging of size 35mm x6 mm including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.
(b) S&F of Back commercial plywood including dismantling unserviceable one complete all as specified, directed and shown on drawings.
(c) S&F of brass Pegs of size 75mm(W) x 120mm (H) including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.
(d) S&F of 5mm looking mirror with edging including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.
(e) M&L for preparation of surfaces with sand / emery paper and applying french polish one or more coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bee's wax complete along with two key plates all as specified and directed.
Removing of glass of Hat Stand and S&F New 6mm Glass god quality (Make- Modguard) as applicable as per drg and as per direction by EIC.
Side board FD-372 (a) S&F door shutters (both) made of 18mm thick Pre-laminated HDHMR board BSL (Make: Century Ply/Green/Archid Ply/Action Tesa) board duly providing 6mm thick teak wood beading all round with fittings and fixtures including dismantling unserviceable one complete all as specified and directed. Note :- (i) Knob shall be aluminium anodized (dark brown chromium plated of approved size & quality). (ii) Hinges shall be 50 mm of approved quality.
(b) Front portion of the drawer as to match with the existing made out of 18mm thick Pre-laminatedMDF board and knob including dismantling unserviceable one complete all as specified and directed.
(c) New top made out of 18mm thick Pre-laminated HDHMR board BSL (Make: Century Ply/Green/Archid Ply/Action Tesa) duly providing 4mm thick teak wood beading all round including dismantling unserviceable one complete all as specified and directed.
(d) S/F 4mm thick one side teak face plywood on sides including dismantling unserviceable one complete all as specified and directed.
(e) Back made out of 6mm thick commercial ply wood including dismantling unserviceable one complete all as specified and directed.
(f) M&L for melamine polish with spray machine after removing of existing polish by scapping and smothening of surface wherever required or as directed by EIC to the following furniture articles all are of MES pattern viz F/DB/FD/MAP/spl type series or similar items incl applying wac for depressed surface as well as washing with caustic soda wherever required before polishng all as specified and shown on drg and as directed by EIC.
Table 900 x 600 mm with/ without drawer FD- 223 & 224 (a) Removal of following existing unserviceable wooden components of various MES F/DB/FD/MAP/TP/SPL furniture items or similar items carefully without distrubing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, providing hinges, placing everypart in-tact the disturbed portion, as applicable as per drgs and as directed by EIC. (b) Work will be executed where the furniture exist in different under units of GE (I) Kanpur Cantt including BSO's Furniture Yard as directed by EIC. (c) Timber Shall be 2nd class teak wood seasoned. CRCA section/CRCA sheet shall be used in repair/maint of steel furniture. (i) Leg
(ii) Top rail (long/front)
(iii) Top rail (short/side)
(iv) Top made of pre-laminated HDHMR board BSL (Make: Century Ply/Green/Archid Ply/Action Tesa) exterior grade 18mm thick post-formed with 0.6 mm thick laminated in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine all as specified in drg and as directed by Engr-in-Charge.
(v) Drawer made of 12mm thick commercial plywood and front side made of 18mm thick pre-laminated MDF board including provision of knob completed all as specified and directed.
(vi) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and directed.
Table 900 x 900 mm Wdn (FD-88) S&F new components of 2nd class HW (shisham) including dismantling unservicable one complete all as specified and directed. (a) Leg
(b) front/Side rail
(c) Top made of pre-laminated HDHMR board BSL (Make: Century Ply/Green/Archid Ply/Action Tesa) exterior grade 18mm thick post-formed with 0.6 mm thick laminated in Mohigni/Walnut colour/shade as approved by Engr-in-Charge with 2 mm thick PVC edging of Make : Rehau/Pegasus/Kynes shall be fixed on two sides it complete with strong bonded chemical adhesive through hot pressed machine all as specified in drg and as directed by Engr-in-Charge.
(d) M&L for melamine polish with spray machine after removing of existing polish by scapping and smothening of surface wherever required or as directed by EIC to the following furniture articles all are of MES pattern viz F/DB/FD/MAP/spl type series or similar items incl applying wac for depressed surface as well as washing with caustic soda wherever required before polishng all as specified and shown on drg and as directed by EIC.
Charpoy GI pipe (FD-220) S&F following components of Charpoy GI pipe including dismantling unservicable one all as specified and directed. (a) Long rail made of 32 mm dia GI Tubing medium grade ISI mark 1.88 mtr long, threaded at both ends and fixing to 3 way 32 mm dia GI elbow of charpoy.
(b) 3 way 32 mm dia GI elbow ISI marked
(c) Check nuts of 32 mm dia
Conversion of 32 mm dia long rail obtained from item No 1 above into two numbers short rail after cutting and threading both ends and fixing to 3 way 32 mm dia existing elbow including dismantling existing one.
Conversion of 32 mm dia short rail obtained from item No 4 above into two numbers leg including fixing to 3 way 32 mm dia after one end threaded .
Removing old unserviceable/rusted MS Plate and S&F new MS Plate of size 900mmx40mm x 5mm duly painted with black colour after applying red oxide after making two Nos holes.
(a) M&L for removing old U/S plywood and S&F New 12 mm BWR phenol bonded commercial plywood of size 2020 mm x 900 mm including fixing of plywood with new 12 Nos Nut and bolts (75mmx6). 2mm teak wood eading complete reast all as per ply with applying with red colour. Necessary reassembling the components as where required to fixing components and tighten the charpoy frame to make original shape of charpoy as per drg before fixing the ply top. Rest all as per directed by Engr-in-Charge.
(b) M&L for painting two coat of synthetic enamel paint with silver shade of Charpoy LegS&Frame as approved by EIC/GE.
Charpoy with hard top (FD/MAP/04) M&L for removing old U/S plywood and S&F New 12 mm BWR phenol bonded commercial plywood of size 1980 mm x 900 mm including fixing of plywood with new 12 Nos Nut and bolts (75mmx6).Necessary reassembling the components as where required to fixing components and tighten the charpoy frame to make original shape of charpoy as per drg before fixing the ply top. Rest all as per directed by Engr-in-Charge.
S&F following components of Charpoy with hard top including dismantling unservicable one all as specified and directed. (a) Stiffeners made of 25x25x16 mm Gauge MS Tube, tighten the charpoy with hard top frame to make original shape of charpoy as per drg. Rest all as per directed by Engr-in-Charge. (Make : Jindal/Bansal/Tata)
Removing old unserviceable/rusted Legs and S&F new MS plate 32x32x5 welded at Bottom of legs & over which 3 mm Thk Rubber sheet fixed with adhesive. the charpoy with hard top frame to make original shape of charpoy as per drg. Rest all as per directed by Engr-in-Charge.
Removing old unserviceable/rusted MS Plate and S&F new MS Plate of size 900mmx40mm x 5mm duly painted with black colour after applying red oxide after making two Nos holes.
ANAND FURNITURE (BID ID -3376489)
Avinash Enterprises (BID ID -3370192)
Star Sofa House (BID ID -3371056)
m/s tripurari enterprises (BID ID -3379288)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .