PROVN OF 2.5 M WIDE FOOTPATH ALONG WITH BOUNDARY WALL INCLUDING REPAIR OF SUNKEN FLOOR IN TOILETS AND MISC WORKS IN RESIDENTIAL AREA AT PCDA NC JAMMU UNDER GE JAMMU

Amount

B/R Portion: - Surface excavation in Hard / Dense Soil n exc 30 cm deep and averaging 15cm thick as in hard dense soil complete all as specified and directed.

Rough excavation n exc 1.5m deep and getting out in Hard/Dense soil complete all as specified and directed.

M&L Hardcore of guage of broken boulders exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L PCC 1:4:8 type D-2 100 mm thick (using 40 mm graded crushed stone aggregate) as sub base to floor complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, grey cement with pigment M-35 grade complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges or coping for poles complete all as specified and directed.

M&L excavation in trenches, n.exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out any type of soil complete all as specified and directed.

M&L for cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation complete all as specified and directed.

Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in 1:6 CM complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in bond stone of retaining wall complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft loose soil complete all as specified and directed.

M&L for chequered cement concrete tiles with white cement and pigments of size 200 x 200 x 25 mm thick and set and pointed in neat cement slurry in floor complete all as specified and directed.

M&L for 20 mm thick cement rendering in CM 1:4 mixed with liquid water proofing compound Pedilite LW plus @ 200 ml per 50 Kg of cement finished surface even and smooth for laying of water proofing membrane complete all as specified and directed. Note : WPC will be measured and paid separately as supply only.

Supply only water proofing liquid compound complete all as specified and as directed.

Removing excavated material exc. 250 m but n exc. 500 m in soil and depositing where directed complete all as specified and directed.

M&L flush pointing in CM 1:3, to random rubble masonry, uncoursed or brought upto courses complete all as specified and directed.

M&L providing precast cement concrete in cover slab (for manhole, drain cover slab) type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) set in CM 1:4 complete all as specified and directed.

M&L MS TMT bars 10 mm dia and over cut to length, bend to shape etc complete binding with and including mild steel annealed wire not less than 0.09 mm dia confirming TMT bars complete all as specified and directed.

Note : The rates of all items deemed to be inclusive for necessary removal of Shrubs/bushes to approach path.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal with all fittings, complete all as specified and directed.

Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal with all fittings, complete all as specified and directed.

S&F steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm, complete all as specified and directed.

S&F steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 20mm, complete all as specified and directed.

Refixing only 15mm dia steel tubing and connections in new or old position including cleaning of old steel tubing (against Item No 20.00) complete all as specified and as directed.

Refixing only 20mm dia steel tubing and connections in new or old position including cleaning of old steel tubing (against Item No 21.00) complete all as directed.

Taking down chowkhats or frames n.exc 1.5 sq.m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 sq.m but n.exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails mild steel frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, including two No's 200mm tower bolt and bow handle each shutter, supplying and fixing in the frame at site as per specification clause No 8B 2.1 to 8B.10 and drawing on page No 178 of MES SSR-2020 Part-II complete all as specified and directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, including three No's 100mm stainless steel butt hinges each frame, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

S&F box type steel windows (factory made) outer frame made out of ERW tube 'P' section 65X45X25 mm and shutter of ERW tube 'P' section 50mmX35mmX20mm openable (double shutter) with glazed shutter on extrernal side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes complete all as specified and shown on drgs No CEPZTD-324/07 Sh 1/3 to 3/3 Note:- The quoted rate a shall also include (i). One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrte surface (ii) 4 nos MS steel lugs made of 20X5 mm Iron flat 200 mm long (iii) PCC block for embedding lugs (iv) Cooler windows where required (v) 10 mm square framed guard bar .

Preparation of newly steel surface of any description and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, of size 15mm dia bore complete all as specified and directed.

S&F in repairs Bip tap standard of PTMT any colour screwed for iron pipe and fixed (Minimum weight 15mm - 90gms) of 15mm dia bore including necessary fittings complete all as specified and directed.

Supply and fixed in repairs PVC connection 15mm bore size with PTMT of length 600 mm long with brass or PVC nuts and PVC washer complete all as specified and directed.

Supply and fixed in repairs high density polyethylene (HDPE) waste water pipes of pressure rating 6 kgf/sq. cm of bore dia 32 mm and 600 mm minimum length. (adjustable type) complete all as specified and directed.

Cleaning of water storage tank completely by removing all scale dirt/dust of any description complete all as directed at site and writing date of cleaning with synthetic enamel paint including all material and labour of capacity ranging exe 250 ltrs and upto and including 2000 ltrs including dismantling and refixing if required complete all as specified and directed.

S&F in repairs CP brass jet spray with flexible pipe not less than 90 cm long fixed to EWC suitable for 15mm bore complete all as specified and directed.

S&F in repairs PVC flushing cistern 10 ltr capacity ISI marked make should be engraved on the body including flushing pipe PVC 90 cm long, pair of bracket with angle valve and PVC connections etc complete all as specified and directed.

S&F in repair Vitreous china squatting pan 'Orissa' pattern' size 580x440mm white, with integral foot rest 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe, etc. complete making good to floor as existing complete all as specified and directed by Engr-in-Charge.

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts, flush pipe and joints complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china urinals, half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with grating and union for discharge pipe, including PVC waste pipe 32mm of suitable length, CP waste coupling 32mm dia suitable for urinals, PVC connection 15x 450mm long, CP urinal spreader,15 mm angle valve fancy type chromium plated complete all as specified and directed by Engr-in-charge.

S&F in repairs Vitreous china wash hand basin white, flat back of size 550x400mm with PVC connection (15x450) mm long with PTMT nuts and PVC washer and including cutting for pinning in ends, pair of cast iron brackets and provision of PVC waste pipe 32mm of adequate length, CP waste coupling 32 mm dia of half or full threaded, chromium plated fancy type, angle valve 15 mm dia bore and taking down unserviceable wash hand basin complete all as specified and directed by Engr-in-charge.

S&F in repairs 125 mm dia steel grating fixed in position complete all as specified and directed.

S&F in repair Health faucet with 1 mtr long flexible pipe complete all as specified and directed.

S&F in repair 75 mm dia cast iron bends any radius diminishing pieces or tapers (large bore measured) fitted with oval access door complete all as specified and directed.

S&F in repair 100 mm dia cast iron bends any radius diminishing pieces or tapers (large bore measured) fitted with oval access doors provided with cement joint complete all as specified and directed.

S&F in repair cast iron 100 mm dia bore pipe, branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors provided with cement joint complete all as specified and directed.

S&F in repair 75 mm dia soil, waste and vent pipes, (sand cast pipes) in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.

S&F in repair 100 mm dia soil, waste and vent pipes, (sand cast pipes) in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.

S&F in repairs 100 mm cast iron saintary connection short connection pipe of length up to 450mm complete all as specified and directed.

S&F in repairs 75mm dia cast iron floor trap with grating including jointing with waste pipe fixed with cement concrete 1:2:4 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises (Glazed tiles) complete all as specified and directed.

M&L for non skid ceramic coloured designer seamless tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured designer seamless tiles 300x450x 7 to 8 mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in coloured cement to match with the surface over and including 15mm thick screed in CM 1:4 complete all as specified and directed.

Dismantling water tanks exceeding 500 and not exceeding 1000 ltr complete all as specified and directed.

S&F 1000 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position complete all as specified and directed.

S&F in repair cover of CI oval acess door with bolts and rubber gasket to make it water tight for 100 mm bore CI bends complete all as specified and directed by Engineer-in-Charge.

S&F in repair cover of CI oval acess door with bolts and rubber gasket to make it water tight for 75 mm bore CI bends complete all as specified and directed by Engineer-in-charge.

M&L for removal of existing treatment of the entire roof surface complete all as specified and directed.

M&L for applying a course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 1800 C and applied @ 1.2 kg/sqm over bitumen felt complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm) laid with 75 mm side overlap and 100 mm overlap on primed surfaces by forced application as per manufacturer's instructions complete all as specified and directed.

M&L for applying two coats of aluminium paint over item no 62.00 over bitumen felt complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L rendering 15mm thick on fair faces of concrete surfaces in CM 1:4 finishing even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5mm thick rendering in CM 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered wall surfaces and applying two coats of cement base paint over a coat of wall putty of 2 mm thick complete all as specified and directed.

M&L for complete removal of existing treatment on old surface of wall and applying two coats of oil bound distemper over a coat of wall putty of 1 mm thick complete all as specified and directed.

M&L for preparation of surface and applying three coats of white wash on newly plaster surface of ceiling surfaces complete all as specified and directed.

Demolition of cinder concrete of any description and in any position and removing the rubbish from work site complete all as specified and directed.

S&F 15 to 18mm thick green marble slab for kitchen platform / shelf / window cill duly machine polished full round on external / projected surfaces complete all as specified and as directed.

E/M Portion: - Removing excavated material from site to a distance not exc 50mtr away and depositing where directed not exc 1.5mtr from the starting point all as directed.

M&L Sub class 'B' bricks well burnt laid with length perpendicular to the axis of the cable in trenches for protection to cable complete.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sq mm, 4 core, complete all as specified and directed by Engr-in-Charge. Note: Wherever cable fixing/connection, suitable thimble should be used as per site situation.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sq mm, 4 core, complete all as specified and directed by Engr-in-Charge. Note: Wherever cable fixing/connection, suitable thimble should be used as per site situation.

S&F PVC cable insulated and sheathed multistranded copper conductor FRLS of size 1.5 Sqmm 3 core for LED street light connection drawn through the steel tubular pole or MS conduit pipe complete all as specified and directed.

Supply & erecting in truly vertical position steel tubular swaged poles 410 SP-55 (9.00 mtrs long) complete with 300 x300x 6 mm thick MS base plate continuously welded at bottom of pole and MS sheet 2 mm thick plug welded at top, bolts, nuts and screws including one shop coat of red oxide primer and internally bituminous painted including painting with two coats of aluminium paint and black and white strips 30 cm upto 1.5mtr height from top of coping in strips complete all as directed by Engineer-in-Charge. Note: - Earth work and PCC shall be measured and paid for separately.

S&F LED street light fittings, 1x60 Watt, powder coated pressure die cast aluminium compact high power LED street light with heat resistant toughened glass with lens complete fixing with the existing GI bracket with proper arrangement all as specified and as directed. Make : Havells, Wipro, C&S.

S&F SMC pole mounted box of size 10"x 8"x 4" with hinged door including clamps, nuts, bolts and washers, Make:- Syntex or equivalent of Hansel / Press fit complete with all as specified and directed and including following accessories: - (a) MCB SP 10 Amp, 10 kA 'C' Series mounted on din rail - 1 No. (b) Connector block suitable for 3ph, 4 wire min 16 sqmm cable- 1 No

M&L for Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and directed.

M/S Haji Zahoor Hussain Ganai

M/S INDERPAL SINGH

bamral builder

M/S RAVINDER SINGH

N S MANHAS

M/S ARUN ANAND

Bidder Name

M/S Haji Zahoor Hussain Ganai

M/S RAVINDER SINGH

M/S ARUN ANAND

N S MANHAS

PAKAYA BUILDERS AND DEVELOPERS PVT LTD

M/S INDERPAL SINGH

bamral builder