Construction of a modern indoor stadium Badminton Court along with the construction of pickle ball court, paddle court and cricket net practice near Amnour community center

Civil Work

Plumbing work

Electrification works

HVAC with ducting (vrv)

Fire fighting works

CCTV Works

Badminton flooring

Cricket practise 2 nets

Pickle ball 1 no.s( 44ft x 20 ft)

Paddle court 1no.s(20m x 10m)

Campus development

TOTAL

Consultancy Fees 1.50% (On "A")

Add 18% G.S.T. on Consultancy Fees

Total Consultancy Fees with GST

(A+C) TOTAL

Add 1% Contigency upto 1 cr. (On "A")

Add 0.5% Contigency for rest Amount

Add Soil test of site

(D+E+F) TOTAL

DESCRIPTION

CIVIL WORKS

PLUMBING WORKS

ELECTRICAL WORKS

Along external wall where the apron is not provided using chemical imulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete.

With chlorpyriphos / Lindane E.C. 20% with 1% concentration.

Under 20 cm wide

Granite of any colour and shade

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent

Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

Using flats 30x6 mm for diagonal braces and central cross piece.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Fixed to openings/ wooden frames with rawl plugs screws etc

Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-incharge.

Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron)

In gratings, frames, guard bar, ladders, railings, brackts. gates & similar works.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/mz

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.

Finishing walls with textured exterior paint of required shade :

New work (Two or more coats applied @ 3.28 ltr/ 10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm

Providing and fixing factory made 18mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer numeric control) routed of approved design by Engineer-in-charge which are machine cut for duct/shaft covering, partitions and partitions andfacades comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) having minimum density of650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm, modulus of elasticity 850 N/mmand resistance to spread of flame of ClassA category with properties of being termite/borer roof, water/moisture proof and fire retardant and fixing on M.S (mild steel) frame made of 25 x 251.5mm square hollow box section including applying a priming coat of approved steel primer, placed at grid made at 1.0x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately.

b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts,bolts, washers, cleats, weather silicone sealant, backer rods etc.

Thermal Insulationof roofingwithbondedmineralwool, laidover false ceiling with suitable adhesive as per directions of the Engineer -in-charge.

Providingandfixing15cmwide45cmoverallsemicircularplainG.S.sheet gutterwithironbrackets40x3mmsizebolts,nutsandwashersetc. including making necessary connections with rain water pipes complete.

0.80 mm thick with zinc coating not less than 275 gm/m2

Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of primer suitable for panelling as per manufacturer's specification as per direction of Engineer-in-Charge all complete.

15 mm thick fully With perforated square/butt edge light weight calcium silicate panels/ tiles

Supplying and installing bed made of ms frame with top of 18mm ply and proper lamination of good make and bwp ply make durian,godrej,featherlite,artisan,sparx as per direction of engineer-in charge

CARRIAGE OF MATERIALS

Thous.

Thous.

Seigniorage

Thous.

Along external wall where the apron is not provided using chemical imulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete.

With chlorpyriphos / Lindane E.C. 20% with 1% concentration.

Under 20 cm wide

Granite of any colour and shade

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent

Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

Using flats 30x6 mm for diagonal braces and central cross piece.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Fixed to openings/ wooden frames with rawl plugs screws etc

Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-incharge.

Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron)

In gratings, frames, guard bar, ladders, railings, brackts. gates & similar works.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/mz

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.

Finishing walls with textured exterior paint of required shade :

New work (Two or more coats applied @ 3.28 ltr/ 10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm

Providing and fixing factory made 18mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer numeric control) routed of approved design by Engineer-in-charge which are machine cut for duct/shaft covering, partitions and partitions andfacades comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) having minimum density of650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm, modulus of elasticity 850 N/mmand resistance to spread of flame of ClassA category with properties of being termite/borer roof, water/moisture proof and fire retardant and fixing on M.S (mild steel) frame made of 25 x 251.5mm square hollow box section including applying a priming coat of approved steel primer, placed at grid made at 1.0x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately.

b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts,bolts, washers, cleats, weather silicone sealant, backer rods etc.

Thermal Insulationof roofingwithbondedmineralwool, laidover false ceiling with suitable adhesive as per directions of the Engineer -in-charge.

Providingandfixing15cmwide45cmoverallsemicircularplainG.S.sheet gutterwithironbrackets40x3mmsizebolts,nutsandwashersetc. including making necessary connections with rain water pipes complete.

0.80 mm thick with zinc coating not less than 275 gm/m2

Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of primer suitable for panelling as per manufacturer's specification as per direction of Engineer-in-Charge all complete.

15 mm thick fully With perforated square/butt edge light weight calcium silicate panels/ tiles

Supplying and installing bed made of ms frame with top of 18mm ply and proper lamination of good make and bwp ply make durian,godrej,featherlite,artisan,sparx as per direction of engineer-in charge

CARRIAGE OF MATERIALS

Thous.

Thous.

Thous.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

Extra for every additional lift of 1.5 m or part thereof in :

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (including the cost of chemical emulsion) :

Along external wall where the apron is not provided using chemical imulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete.

Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.

Centring and shuttering including strutting,propping etc. and removal of form for.

Edges of slabs and breaks in floors and walls

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth & above plinth level.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cementcontent as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and including retard setting of concrete, improve workability without impairing strength andadmixtures in recommended proportions as per IS: 9103 to accelerate, reinforcement, durability as per direction of Engineer-incharge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.

Half brick masonry with bricks of class designation 100A in foundations and plinth in : Extra for half Brick masonry in superstructure above pinth level upto floor V level.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Granite of any colour and shade

Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone finished smooth.aggregate 6 mm nominal size) as per direction of Engineer-in-Charge

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20mm(avearage) thick base of cement mortar 1:4(1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium handles of approved make anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessry screws etc. complete.

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVCextruded interlocks, EPDM gasket, wool pile, zinc alloy (white powdercoated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc.Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately)Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings completejncluding applying a priming coat of approved steel primer

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-incharge.

Steel work welded in built up sections/framed work including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.

Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength,thickness & size/shape, made by table vibratory method , to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks,lawns, drive ways or light traffic parking etc. all complete as per manufacturer’s specifications & direction of Engineer -in-Charge:

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

12 mm cement plaster of mix :

20 mm cement plaster of mix :

6 mm cement plaster of mix :

Extra for providing and mixing water proofing material in proportion recommended by the manufacturers:

Finishing walls with textured exterior paint of required shade :

Glass Door & Partition

Grading roof for water proofing treatment with

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer- in-charge. The product performance shall carry guarantee for 10 years against any leakage.

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:

a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including

Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.26.2)For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.

(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.

b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts,bolts, washers, cleats, weather silicone sealant, backer rods etc.

The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Providingandfixing15cmwide45cmoverallsemicircularplainG.S.sheet gutterwithironbrackets40x3mmsizebolts,nutsandwashersetc. including making necessary connections with rain water pipes complete.

15 mm thick fully With perforated square/butt edge light weight calcium silicate panels/ tiles

Providing & fixing of white vitreous china pedestal type water closet (Europian type) with seat and lid, 10litre low level white vitreou china flushing cistern & cp flush bend with fittings & CI brackets, 40mm flush bend, overflow arrangement with special of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors whereever required.

Providing & fixing white vitrous china flat back or wall corner type lipped front urinal basin of 430X260X350 mm and 340X410X265 mm sizes respectively with automatic flushing cistern with standerad flush pipe C.P brass spreaders with brass unions and GI clamps complete including painting of fittings and brackets, cutting and making good the walls and floors whereever required:

Providing and fixing wash basin with C.I brackets, 15 mm cp brass pillar taps, 32 mm cp brass waste of standar pattern, including painting of fittings and brackets, cutting and making good the walls requred:

Providing and fixing soil, waste and vent pipes

100mm dia

Providing and fixing M.S. holder bat clamps of approved design to sand cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10 x 10 x 10 cm of 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) including cost of cutting holes and making good the walls etc.

Providing and fixing plain bend of required degree.

100mm dia

Providing and fixing single equal plain junction of required degree :

Providing and fixing terminal guard.

Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe.

100mm dia

Providing and fixing M.S stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter.

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

100mm inlet and 100mm outlet

Painting sand cast iron / centrifugally cast (spun ) iron soil, waste vent pipes and fittings with paint of any color such as chocolate grey ,or buff etc .over a coat of primer (of approved quality ) for new work .

Providing and fixing Heavy class SS grating with Anti Cockroach Floor Trap of approved design including setting in floor with cement motor to match with floor finish as per direction of Engineer-Incharge.

Size 125 mm

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

Providing and fixing on wall face unplasticised PVC (working pressure 4 kg per sqcm) rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised-PVC rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

Providing and fixing unplasticised-PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S screws or required length including cutting brick work and fixing on cement mortar (1:4) 1 cement:4 coarse sand and making good the wall etc. complete.

Providing and fixing mirror of superior glass(approved quality)and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes hyaving thermal stability for hot &coldwater supply, including all CPVC plain & brass threaded fitting, including fixing the pipewith clampsat 1 m spacing. This includesjointing of pipes &fittingwith one step CPVC solvent cement and cost ofcutting chases and making good the same including testing ofjoints complete as per direction ofEngineer in Charge.

Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes hyaving thermal stability for hot &coldwater supply, including all CPVC plain & brass threaded fitting, including fixing the pipewith clampsat 1 m spacing. This includesjointing of pipes &fittingwith one step CPVC solvent cement and cost ofcutting chases and making good the same including testing ofjoints complete as per direction ofEngineer in Charge.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes hyaving thermal stability for hot &coldwater supply, including all CPVC plain & brass threaded fitting, including fixing the pipewith clampsat 1 m spacing. This includesjointing of pipes &fittingwith one step CPVC solvent cement and cost ofcutting chases and making good the same including testing ofjoints complete as per direction ofEngineer in Charge.

Providing & fixing Auto Air vent for cold water supply risers, suitable for pressure not less than 15 Kg/Sq.cm.

15 mm dia

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1cement : 1 fine sand) including testing of joints etc. complete

Providing and fixing square mouth S.W. gully trap grade 'A' complete with C.I. Grating brick masonry chamber with bricks of class designation 75 and water tight C.I. Cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design

150x100 mm size P type

Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1:4 (1 cement: 4 coarse sand) R.C.C. top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design.

Inside size 90x80 cm and 45 cm deep including CI Cover with frame (light duty as per IS:12592) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg ( weight of cover 23 kg and weight of frame 15 kg)

Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design

Making connection of drain or sewer line with existing manhole including breaking into and manhole good the wakll, floors with cement concrete 1:2:4 mix ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 Coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc, complete: .

Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 150 metre depth below ground level. (All types of soil)

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC (UPVC) medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC (UPVC) medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per equirement, all complete for borewell of:

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.

Local Sand

Stone Chips

Brick

Extra royalty of stone chips

Extra royalty of Sand

Extra royalty of Brick

Extra royalty of Earth

Cement

Local Sand

Stone Chips

Brick

Earth

WIRING

Wiring for light point/ fan point/ exhaust fan point with 1.5 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular type switch, modular Plate, suitable size G.I box etc. as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

GI BOX & SWITCH ACCESSORIES

Supplying and fixing following modular base and cover plate on exhisting modular metal box etc. as required.

DB'S MCB

S/F/F Way horizantol three Pole & neutral, sheet steel, MCB distribution board, 415V on surface/recess, complete with tinned copper busbar,neutral busbar,earth bar, din bar inerconnections, power painted including earthing etc as reqd.(But without MCB/RCCB/Isolator)

Supplying and fixing following rating, 240/415 volts, ‘C’ series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

FIXTURE AND FITTING

supply and installation of following sweep sizees PVC/ABS square body exhaust fan with automatic opnable louver shutter in existing opening including making connection, testing etc. as required

Supplying and fixing surface mounted following types LED downlighter with minium efficiency 100lm/w in pressure dia-cast alluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq mm FRLS PVC insulated copper conductor cable etc as required.

Supplying and fixing fotrlowing types LED Flood light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on poleibuilding including connection earthing the body etc as required.

Supplying and fixing of following types lamp in the existing electrical fitting /fixtures etc. as required.

EARTHING

LT POWER CABLE

Laying of one number PVC sheated/XLPE power cable of 1.1KV grade of following size direct in ground including excavation,and refilling the trench etc. excluding sand cushoining and protecting covering

PANEL(LOCATION-- BELOW STAIR)

providing and fixing following rating and breaking capacity MCCB in existing cubicale panel board including drilling holes cubicle panel, making connections etc. As required.

providing and fixing following capacity four pole ON-LOAD/Panel mounted changeover switchs inside the exsiting cubicle panel board including drilling holes in cubicle panel, making connections etc. as required (but without bus bar copper strip)

Supplying and fixing following rating, double pole 240/415 volts, ‘C’ series, isolator suitable for inductive loads of following in the existing MCB DB complete with connections, testing and commissioning etc. as required.

PANEL(LOCATION-- TOP STAIR)

providing and fixing following rating and breaking capacity MCCB in existing cubicale panel board including drilling holes cubicle panel, making connections etc. As required.

Supplying and fixing following rating, double pole 240/415 volts, ‘C’ series, isolator suitable for inductive loads of following in the existing MCB DB complete with connections, testing and commissioning etc. as required.

TRANSFORMER

Supplying and installing 200KVA, 11/0.433KV, Copper Wound Dist. Transformer OLTC.

FACTORY TESTING REPORT TO BE SUBIMITED BEFORE DISPATCH.

CAMPOUS POLE & LIGHT

Supplying and laying of following size DWC HDPE pipeISI marked along with all accessories like socket, bend.couplers etc. conforming to IS 14930, part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level ) including excavation and refilling the trench but excluding stand cushioning and protective covering etc. complete as required. in the existing trench, complete as required.

Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with alluminium conductor for working voltage upto 1.1 kv as required.

Constructing brick masonary chamber for underground C.I inspection chamber and bends with bricks in cement mortar 1:4(1 cement:4coares send) C.I cover with frame (light duty) 455X610mm internal diamensions,total weight of cover with frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg) R.C.C top slab with 1:2:4 mix(1 cement: 2 coares sand : 4 graded stone aggregate 20 mm nominal size ), 12 mm thick with cement mortar 1:3(1 cement : 3 coares sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design.

Inside diamensions 455X610 mm and 45 cm deep for single pipeline

6 LAYER SYNTHETIC SYSTEMS 1. RESURFACER COURSE (2LAYER) 2. PRO-CUSHION COURSE (2 LAYER) 3. TEXTURECOLOURS COURSE (1 LAYER) 4. TOP COLOURS COURSE (1LAYER) 5. WHITE LINE MARKING AS PER INTERNATIONAL STANDARD (2 LAYER).size (6100mm x13400mm) 1 court

6 INCHES OF SUB BASE M 10 GRADE PCC WITH SLOPE AS PER SITE FOR WATER OUTFLOW

SET UP POLE STRUCTURE (* VERTICAL POLES : 2" X 2" TRUSS POLES * HORIZONTAL POLES : 2." X 2" IN THREE LAYER* BOTTOM POLES : 2" X 2" * INCLUDE FABRICATION, GROUTING, LABOR, INSTALLATION.

35MM ARTIFICIAL GRASS SPECS 📏 PILE HEIGHT: 35MM 🧵 STITCHES: 14 PER 10CM 🎯 DTEX: 6200 🟩 BACKING:BLACK – PERFORATED DRAINAGE 🌿 YARN: PE + PPFIBERS 🧪 UV STABILIZED, NON-TOXIC SUITABLE FOR OUTDOOR & INDOOR USE

GRAVITY BOWLING MACHINE MODEL - ADVANCE Speed range : 30-99 + MPH (159 KMPH) Intelligent Digital LCD back-lit control panel showing speed and bias display, error messages, diagnostics Microprocessor based circuit programed for accurate delivery Brushless motor- most advance DC motors with built in speed and load sensing unit Low power consumption and maintenance free advance motors Optional Tab based (android/Apple) Wireless enabled remote, controlled Via WIFI by any smart mobile phone Throws all type of cricket leather ball, cricket tennis balls & lite dimple ball (NEW) Throws spin, swing and fastballs with repetitive Lateral and vertical adjustments allow user to throw various pitches Concave wheels made of PU for precision balance, …accuracy, and excellent durability Perfect for both indoor and outdoor use Easily set up and transported Optional 12 ball Auto feeder with 2 speed available Package includes tripod stand Shipping Weight – 27kgs Power – can run for 2.5hrs to 4hrs on 12v battery (36-45AH) OR mains Power transformer 220~230V AC converted to 12VDC

Supply of Indoor units

Supply of Concealed type Indoor Unit with fittings. Consisting of fan, Four speed motor,coil Section with DX coil, outer cabinet,filter, insulated drain pan,including all accessories.Cable from indoor unit to socket and headers etc. which shall be supplied by the OEM of VRF system. complete as required. Make - HITACHI

REMOTE CONTROLLER :

Supply of Imported Control Systems & Y-Joints :

INSTALLATION & LOW SIDE WORKS

Installation, testing and commissioning of Variable Refrigerant Flow System

Outdoor Units

Installation, testing and commissioning of the above VRF Indoor units:

REFRIGERANT PIPING:

DRAIN PIPES OF INDOOR UNITS:

SHEET METAL WORK

DUCT INSULATION

Thermal Duct Insulation

GRILL DIFFUSER

GRILL

CANVAS

Canvas

Transmission & Control Wiring

Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with twoor more coats of synthetic enamel paint of requiredshade complete as required

Supplying, installing, testing and commissioning sector panel suitable for following zones, complete with visual indications for shirt circuit fault, open circuit fault, fire condition and all other standared facilities as per IS:2189 with mimic diagram for, all area zone covered, complete with all connections, interconnections as required.

Terrace Pump : Supplying Horizontal end suction Pump with CI Impeller, S.S. – 410 shaft & sleeve & Mechanical sealed (Head : 435 Mtr., Flow : 450 LPM, Kirloskar make 7.5 HP, 2900 RPM, 3 Phase, 415 volt REFC AC Motor, coupling, Guard, Base Plat)

Fabricating, Supplying, erection, testing and commissioning of totally enclosed cubicle type free standing, floor mounted, compartmentalized, sectionalized, dust, damp and vermin proof, with suitable natural ventilation arrangement, front and rear accessible, lockable power cum CONTROL PANEL, fabricated from 1.6/ 2mm thick MS sheet (to give IP 54 protection) spray painted with approved colour shade, have 4 strip sleeved aluminium / aluminium alloy bus bar, bus bar supports, interconnecting from bus bars to outing swatches / MCCBs including earthing the board suitable to accomodate the following including numbering etc. as required :

Other accessories like , Earth bus 20 x 3 AL. and as

PIPING AND ACCESSORIES ( HYDRANT, WET RISER & SPRINKLER SYSTEM)

Supplying, laying, jointing and testing of 'B class' heavy duty G.I. pipe, conforming to IS 1239 flanges and fittings such as Bends, Tees, reducers, rubber insertions and galvanised nut & bolts, i/c fixing the pipe on well / ceiling with suitableG.I. strip/ clamps / bracket & painting with one coat of anticorrosive paint / primer and two coats of synthetic enamel paint etc. complete as required. pipe shall have welded connections complete with bevel cut by angle grinder and use of three phase rectifier welding set. Rate shall also include cost of hanger & clamps as required & including all civil breakage and making good the same pipes brought to site shall have bevel edge at ends shall be varnish coated externally. Make:JINDAL/ BANSAL/ IMPERIAL/ ISI Mark

Supplying and fixing of SINGLE HEADED HYDRANT VALVE inlet complete with 63mm dia female instantaneous outlet of S.S. as per type "A" of IS: 5290 - 1977 with plastic blanked cap, steel chain,

Supplying and fixing of FIRST -AID Hose rel with MS constriction spray painted in pos office red, conforming to IS 884 complete with the folowing as required. 20mm nominal dia. Water hose thermoplastic (Textile rainforced) ype-2 as per IS : 12585 20mm nomina internal dia. gun metal globe valve & Nozzle. drum and brackets for fixin the equipments on wal. connections from riser with 25 mm dia stop gun metal valve & M.S pipe and socket.

Providing S.S. short BRANCH PIPE. with 20mm nominal internal diameter size nozzal conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :

Providing & fixing collecting head with 63 mm dia instantaneous type inlet 150 dia flanged, outlet with built in check valve for drawOut for FIRE BRIGADE CONNECTION fire riser.

2- way 100 mmdia. M.S pipe

Providing & fixing dual plate spring operated wafer type NON RETURN VALVE complete with bolts, nuts, washers and neoprene rubber gaskets as required Make: IS Approved

Providing & fixing three way fire brigade inlet to riser with BUTTERFLY VALVE and dual plate spring operated wafer type non return valve complete with bolts, nuts, washers and neoprene rubber gaskets as required. Body shall be of C.I. instantaneous inlet to IS: 903 complete with 25 mm dia drain, rubber blank caps Make: CRI/As per IS

Providing & fixing SUCTION STRAINER / FOOT VALVE complete including matching flanges, nuts & bolts.

Providing , fixing, testing and commissioning of 15 mm dia quartzoid bulb typesprinklers of rating 68 degree centigrade with required accessories

Supplyin, insallation testing and comissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer hread with maximum workig pressure of 175 PSI test pressure of 875 PSI (Brust) with branch line (Inlet) 25mm NPT male thread to sprinker head (outlet) 15 mm NPT female thread with reducer, nippe, 2 ide brackets, centre bracket, stock bar of following sizes complete as required.

ESTIMATE FOR FIRE EXTINGUISHER.:-

Supply, installation, testing and commissioning of following CCTV

Supply, Installation, testing and commissioning of 32 CH NVR with Dual-Core embedded processor, 1 Audio IN G 1 Audio Out, Interface 2 HDMI +1 VGA, HTTP, HTTPS, TCP/IP, IPv4, with Internal inbuilt HDD SATA of suitable capacity for storage of 24 Hours x 30 Days for all cameras, RAID 5, Interface -10/100/1000 Mbps, Compatible with IP cameras of as above, Multi client access via smart phone or PC, Intelligent point view, fail over data back up with edge storge, redundant RAID HDD system, PTZ control and time to automatic release, preset position, Assign command to keyboard shortcut and joystick buttons with auxiliary commands, Simultaneous HDMI G VGA up to 4K, HDD quota management system etc. as per specification. Complete in all respect. Certifications - CE /UL / EN / FCC G BIS.

Supply, installation, testing and commissioning of 32+2 Port POE fast Ethernet smart managed switch (24 x 10/100/1000 Mbps, 2 x Gigabit SFP, 2 x 10G SFP+), port standards G Functions - IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ae 10 Gigabit Ethernet, IEEE 802.3x Flow Control for full-duplex mode and auto- negotiation, switching capacity @ 62GBPS, MPFR @ 68.45 Mpps, Power Over Ethernet, complete in all respect as per specification.

Supply, installing, testing and commissioning of PC with 6th Generation Intel® Core™ i7-6700 with Intel® UHD Graphics 630, 1 TB 7200 RPM SATA, 8 GB RAM, DVD Drive (Reads and Writes DVD) with key board G mouse including licenced OS G all basic software and Suitable Graphic card to view HD images, Minimum port - 1 HDMI; 1 line in; 1 line out; 1 power connector; 1 RJ-45; 1 VGA; 4 USB 2.0, Trusted Platform Module (TPM) 2.0 and network switch etc. but without monitor as per specification. Complete in all respect. This PC shall be used for above CCTV system.

Supply and fixing of MS conduits in following sizes including cost of junction boxes, bends, elbows, sockets, tees etc. laying in slab cutting of chase in wall / slab / floor etc. and making good or surface mounted including all fixing hardware, complete in all respect.

Description

EARTH WORKS:-

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

All kinds of soils

Total Qty.

Extra for every additional lift of 1.5 m or part thereof in :

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead

Excavating, supplying and filling of local earth (including royalty but excluding cairriage cost) by mechanical transport upto a lead of 3km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. If local earth is available at more than 3 km lead the actual lead must be approved by compitent authority. cairraiage of material will be paid seperately and calculated after deducting initial lead.

Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete.

CONCRETE WORKS:-

Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.

1:2:4 (1 Cement: 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.

REINFORCED CEMENT CONCRETE WORK:-

Centring and shuttering including strutting,propping etc. and removal of form for.

Foundations, footings, bases of columns etc. for mass concrete.

Suspended floors, roots, landings, balcnies and access platform.

Shelves (Cost in situ)

Lintels, beams, plinth bams, griders, bressumers and contilevers.

Total Qty.

Total Qty.

Total Qty.

Columns,Pillars, Piers, Abutments, Posts and Struts

Sum Total

Stairs,(excluding landings) except spiral-staircaces.

Edges of slabs and breaks in floors and walls

Under 20 cm wide

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth & above plinth level.

Concrete.

Coefficient

Thermo-Mechanically Treated bars TMTC-500-8mm dia

Thermo-Mechanically Treated bars TMTC-500-10mm dia

Thermo-Mechanically Treated bars TMTC-500-12mm dia

Thermo-Mechanically Treated bars TMT-500-16mm dia

Thermo-Mechanically Treated bars TMT-500-20mm dia

Thermo-Mechanically Treated bars TMT-500-25mm dia

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cementcontent as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and including retard setting of concrete, improve workability without impairing strength andadmixtures in recommended proportions as per IS: 9103 to accelerate, reinforcement, durability as per direction of Engineer-incharge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.

All works upto plinth level. Concrete of M-25 grade with minimum cement content of 330 kg/cum

Footing

All works above plinth level upto floor V level. Concrete of M-25 grade with minimum cement content of 330 kg/cum

Brick WORK:-

Brick work with bricks of class designation 100A in foundations and plinth in : Extra for Brick work in superstructure above plinth level upto floor V cum(1:4)

Foundation

Superstructure

Extra for Brick work in superstructure above plinth level upto floor V cum Cement mortar 1:6 (1 cement: 6 coarse sand )

Half brick masonry with bricks of class designation 100A in foundations and plinth in : Extra for half Brick masonry in superstructure above pinth level upto floor V level.

Cement mortar 1:4 (1 cement: 4 coarse send)

Extra for providing and placing in position 2 Nos, 6 mm dia , MS bars at every third course of half brick masonry (with F.P.S bricks)

MARBLE WORK

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Granite of any colour and shade

Area of slab upto 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Granite work

Extra for providing opening of required size & shape for wash basins/kitchen sink in kitchen platform. Vanity counters and similar location in marble/granite/stone work including necessary holes for pillar taps etc. including rubbing,moulding and polishing of cut edges etc. complete.

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone finished smooth.aggregate 6 mm nominal size) as per direction of Engineer-in-Charge

Granite Stone of approved shade

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20mm(avearage) thick base of cement mortar 1:4(1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :

Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent

Providing and fixing adjustables tainless steel cramps of approved quality, required shape and size,adjustable with stainlesssteel nuts, boltsandwasher(totalweightnot lessthan260gms), fordrystone claddingfixedonframeworkatsuitablelocation, includingmaking necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-in-charge.

Wood & PVC Work-:

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).

Second class teak wood

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts,nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing aluminium handles of approved make anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessry screws etc. complete.

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Twin rubber stopper

Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener to be paid for separately).

Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/ m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-incharge (panneling to be paid for separately).

Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc.,with G.I. beading of appropriate size, made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc., complete all as per direction of Engineer-in-charge. With clear fire resistant glass panes 6 mm thick of approved brand, having minimum 60 minutes fire resistance

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on backside of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge,all complete.

Providing & fixing of wooden acoustic doors with main door frame of hardwood & the acoustic door leaf made using 50mm framework, acoustic insulation as infll, ply installed on either side & finally finished with laminate as per approved colour & design.Door to have complete hardware set (door closure, door handles, hinges, lock & drop down seal) all of approved make & ISI mark only.

STEEL WORK:-

Supplying and fixing-rolling shuters of approved make.made of required size of M.S.Iaths interlocked together through their intire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arragements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25mmM.S. Laths with 1.25mm thick top cover.

Providing and fixing ball bearing for rolling shutters.

Extra for providing mechanical device chain and crank operation for operating rolling shutters: Exceeding 10.00 sqm and upto 16.80 sqm in area (say average 14 sqm)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.).

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings completejncluding applying a priming coat of approved steel primer

Using flats 30x6 mm for diagonal braces and central cross piece.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Fixed to openings/ wooden frames with rawl plugs screws etc

Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-incharge.

Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron)

FLOORING WORK:-

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown, laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete.

Size of Tile 60x60 cm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.

Size of Tile 600 x 600 mm.

Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l,

ROOFING & FALSE CEILING:-

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement:2 coarse sand:4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3(1 cement::3 coarse sand)as per standard design.In 75x75 mm deep chase

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished 12 mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.

FINISHING WORK:-

12 mm cement plaster of mix :

1:6(1 cement: 6 coarse sand)

20 mm cement plaster of mix :

1:4 (1 cement: 4 coarse sand)

6 mm cement plaster of mix :

1:3 (1 cement: 3 fine sand)

Extra for providing and mixing water proofing material in proportion recommended by the manufacturers:

20 mm cement plaster 1:4(1 cement: 4 sand)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and softwood)

Applying priming coat: With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works

Finishing walls with textured exterior paint of required shade :

New work (Two or more coats applied @ 3.28 ltr/ 10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work

Steel work welded in built up sections/framed work including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/mz

1.00 mm thick with zinc coating not less than 275 gm/mz

Glass Door & Partition

Providing and fixing frameless fully glazed 12mm thk toughened float glass door fixed with necessary patch fittings (Dorma make)including cutting, making holes, cut outs in the glass of required shape and size to ac BWR IS 303odate fittings and fixing the fittings in floors, soffits, jams including necessary fixtures, screws, sealant wherever required and SS cover over patch fittings. Rate shall include approved patch fitting locking systems, 1 pair of 12” long S. S. (C Shape) Handles of approved make, floor springs, and any necessary hardware items.( DORMA MAKE Top Pivot - PT 24, Top Patch Fittings - PT 20, Bottom Patch fittings - PT 10, Floor Spring - BTS 75 V, Corner lock with strike plate and Euro Profile Cylinder - US 10, Handle - TG 9300 EQ - S 25mm dia X 300mm length)

Providing and fixing of 12 mm thick toughened glass partition with all sides polish with stainless steel frame with glass door including all hardware and accessories etc. complete as directed by Architect / Engineer.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVCextruded interlocks, EPDM gasket, wool pile, zinc alloy (white powdercoated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc.Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately)Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

WATER PROOFING:-

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C. kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming tc IS 2645 in recommended proportions.(ii) 11 nd course of 20 mm cement plaster 1:3 (1 cement:3 coarse sand)mixed with water proofing compound in recommended proportion, (iii) Illrd course of applying blown or/residual bitumen aplied hot at 1.7 kg. per sqm of area, (iv) Ivth course of 400 micron thick PVC sheet.(Overlaps at joints of PVC shet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqni).

Grading roof for water proofing treatment with

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer- in-charge. The product performance shall carry guarantee for 10 years against any leakage.

For vertical surface two coats @0.70 kg per sqm

For horizontal surface one coat @1.10 kg per sqm.

STRUCTURAL GLAZING AND ALUMINIUM COMPOSITE PANEL

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:

Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.26.2)For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.

Providing and fixing factory made 18mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer numeric control) routed of approved design by Engineer-in-charge which are machine cut for duct/shaft covering, partitions and partitions andfacades comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) having minimum density of650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm, modulus of elasticity 850 N/mmand resistance to spread of flame of ClassA category with properties of being termite/borer roof, water/moisture proof and fire retardant and fixing on M.S (mild steel) frame made of 25 x 251.5mm square hollow box section including applying a priming coat of approved steel primer, placed at grid made at 1.0x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately.

b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts,bolts, washers, cleats, weather silicone sealant, backer rods etc.

Thermal Insulationof roofingwithbondedmineralwool, laidover false ceiling with suitable adhesive as per directions of the Engineer -in-charge.

Providingandfixingadjustablestainlesssteel crampsofapproved quality, requiredshapeandsize,adjustablewithstainlesssteelnuts, boltsandwasher(totalweightnot lessthan260gms), fordrystone claddingfixedonframeworkatsuitablelocation, includingmaking necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-in-charge.

Providingandfixing15cmwide45cmoverallsemicircularplainG.S.sheet gutterwithironbrackets40x3mmsizebolts,nutsandwashersetc. including making necessary connections with rain water pipes complete.

0.80 mm thick with zinc coating not less than 275 gm/m2

Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of primer suitable for panelling as per manufacturer's specification as per direction of Engineer-in-Charge all complete.

15 mm thick fully With perforated square/butt edge light weight calcium silicate panels/ tiles

EXTRA ROYALTY on mining material under notification no. 2961 Dated 06.05.2026 Govt. of Bihar,Minning Department.

REDUCE GST ON CEMENT FROM 28% TO 18% wef 22.9.2025

CARRIAGE OF MATERIALS

MATERIAL STATEMENT

CEMENT (MT)

Item Code

All kinds of soil

1:2:4 ( 1 Cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)

1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate20 mm nominal size)

Thermo-Mechanically Treated bars TMTC-500-10mm dia.

TOTAL (A)

EXTRA ROYALTY on mining material under notification no. 2961 Dated 06.05.2026 Govt. of Bihar,Minning Department.

Carriage of Materials

Seigniorage Fee

Bricks

Coarse Sand

Stone Chips

Local sand

SAND (cum)

Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete.

Brick Work (1:4)

Brick Soling

EXTRA ROYALTY on mining material under notification no. 2961 Dated 06.05.2026 Govt. of Bihar,Minning Department.

Brick

Coarse Sand

Stone Chips

Local sand

Earth

SAND (cum)

Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Details of cost for 10 cum

PAVER

KERB STONE

Description

Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 150 metre depth below ground level. (All types of soil)

(b) 300mm dia bore from G.L m to 90.0M

(d) 300mm dia bore from 90.0M to 150.0M

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC (UPVC) medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.

150 mm nominal size dia

100 mm nominal size dia

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC (UPVC) medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.

100 mm nominal size dia

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per equirement, all complete for borewell of:

(a) 150 mm dia well cap

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.

150 mm dia

100mm dia & 6mm thick M.S. well shoe plug

Gravel packing in tubewell construction in accordance with IS:4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water sampl &getting tested in approved laboratory, disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

Supplying all materials and labours for arrangement for additional water required during the drilling period for 70 Hrs & site clearance & leveling etc. And providing the soap duster etc. to staff engaged in drilling etc. all complete work as per specification & direction of E.I.

Supply,Installation, testing & Commissioning of suitable capacity and type of submersible pump set capable to discharge 20,000 ltrs. of clean filtered water from a 250 mm x 150 mm deep tubewell at a total head of 30 meter, complete with control panel,24 Metres of suitable size G.I. column pipe, bend, gate valve nipple supporting clamp, 30 Metres of neoprene cable etc. complete as required. (payment will be made as per actual voucher/receipt submiited by contrcator.)

CODE No.

ESTIMATE FOR FIRE ALARM SYSTEM :-

Heat Detector: Supplying, installing, testing and commissioning of heat detetor oprating at 54 degree C/57 degree C with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection as required.

Smoke Detector: Supplying, installing, testing and commissioning of Smoke Detectors with built in LED and mounting base complete with all connection etc. as required.

Supplying, installing, testing and commissioning of manual call box of ABS type in surface /recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Supplying, installing, testing and commissioning of fire alarm sounder (Hooter) with facility to make announcement of ABS box with hinged cover plate & suitable for opration with amplifier i/c line matching transformer erc. as required. type in surface /recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Supplying, installing, testing and commissioning sector panel suitable for following zones, complete with visual indications for shirt circuit fault, open circuit fault, fire condition and all other standared facilities as per IS:2189 with mimic diagram for, all area zone covered, complete with all connections, interconnections as required.

Supplying, installing, testing and commissioning of addressable beam detector with short circuit isolater (Inbuilt or seprate) complete with emiter and receiver including connections wih remote test features etc. complete as required.

supplying and laying (fire survival / shield) armoured cable 2 x 1.5 sq. mm. 600/1000 volt annelead copper conductor having XLPE insulation, stell wire armouring & FRLS outer sheet complete as required .

Supply, Erection, Testing, commissioning of Fire Hydrant & Sprinkler System

Terrace Pump : Supplying Horizontal end suction Pump with CI Impeller, S.S. – 410 shaft & sleeve & Mechanical sealed (Head : 435 Mtr., Flow : 450 LPM, Kirloskar make 7.5 HP, 2900 RPM, 3 Phase, 415 volt REFC AC Motor, coupling, Guard, Base Plat)

450LPM at 35m Head(7.5 HP)

ELECTRICAL

Fabricating, Supplying, erection, testing and commissioning of totally enclosed cubicle type free standing, floor mounted, compartmentalized, sectionalized, dust, damp and vermin proof, with suitable natural ventilation arrangement, front and rear accessible, lockable power cum CONTROL PANEL, fabricated from 1.6/ 2mm thick MS sheet (to give IP 54 protection) spray painted with approved colour shade, have 4 strip sleeved aluminium / aluminium alloy bus bar, bus bar supports, interconnecting from bus bars to outing swatches / MCCBs including earthing the board suitable to accomodate the following including numbering etc. as required :

Providing level controllers, PRESURE SWITCHES, wiring, cabling from level controller / pressure switch to panel etc. complete as required to operated the system automatic/manual. Pump shall be protected against running dry.

Providing & fixing Dial Type PRESURE GAUGE complete with pipe stem & cock

PIPING AND ACCESSORIES ( HYDRANT, WET RISER & SPRINKLER SYSTEM)

Supplying, laying, jointing and testing of 'B class' heavy duty G.I. pipe, conforming to IS 1239 flanges and fittings such as Bends, Tees, reducers, rubber insertions and galvanised nut & bolts, i/c fixing the pipe on well / ceiling with suitableG.I. strip/ clamps / bracket & painting with one coat of anticorrosive paint / primer and two coats of synthetic enamel paint etc. complete as required. pipe shall have welded connections complete with bevel cut by angle grinder and use of three phase rectifier welding set. Rate shall also include cost of hanger & clamps as required & including all civil breakage and making good the same pipes brought to site shall have bevel edge at ends shall be varnish coated externally. Make:JINDAL/ BANSAL/ IMPERIAL/ ISI Mark

Supplying and fixing of SINGLE HEADED HYDRANT VALVE inlet complete with 63mm dia female instantaneous outlet of S.S. as per type "A" of IS: 5290 - 1977 with plastic blanked cap, steel chain,

Single headed stainless steel

Stainless stell (grade304)

Supplying and fixing of FIRST -AID Hose rel with MS constriction spray painted in pos office red, conforming to IS 884 complete with the folowing as required. 20mm nominal dia. Water hose thermoplastic (Textile rainforced) ype-2 as per IS : 12585 20mm nomina internal dia. gun metal globe valve & Nozzle. drum and brackets for fixin the equipments on wal. connections from riser with 25 mm dia stop gun metal valve & M.S pipe and socket.

Providing S.S. short BRANCH PIPE. with 20mm nominal internal diameter size nozzal conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :

Stainless stell (grade304)

Providing & fixing collecting head with 63 mm dia instantaneous type inlet 150 dia flanged, outlet with built in check valve for drawOut for FIRE BRIGADE CONNECTION fire riser.

Providing and fixing of weather proof standard HOSE CABINATE ( 20"x20"x10") having central opening glazed door with 3 mm thick clear glass including necessary locking arrangement with Allan key, power coating with PO red paint and for housing 1nos. RRL hose pipe, 1 NO branch pipe. as reqd.

Providing & making drainage provision for the riser with 25 mm dia BALL VALVE completed as required

Providing & fixing dual plate spring operated wafer type NON RETURN VALVE complete with bolts, nuts, washers and neoprene rubber gaskets as required Make: IS Approved

Providing & fixing three way fire brigade inlet to riser with BUTTERFLY VALVE and dual plate spring operated wafer type non return valve complete with bolts, nuts, washers and neoprene rubber gaskets as required. Body shall be of C.I. instantaneous inlet to IS: 903 complete with 25 mm dia drain, rubber blank caps Make: CRI/As per IS

Providing & fixing SUCTION STRAINER / FOOT VALVE complete including matching flanges, nuts & bolts.

Providing & fixing air vessel made of 250 mm dia. 8mm thick MS sheet, 1200mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25mm dia. gun metal wheel valve with required accessories, psressure gauge and painting with synthetic enamel paint of approved shade as required.

Providing , fixing, testing and commissioning of 15 mm dia quartzoid bulb typesprinklers of rating 68 degree centigrade with required accessories

Pendent Sprinkler

Supplyin, insallation testing and comissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer hread with maximum workig pressure of 175 PSI test pressure of 875 PSI (Brust) with branch line (Inlet) 25mm NPT male thread to sprinker head (outlet) 15 mm NPT female thread with reducer, nippe, 2 ide brackets, centre bracket, stock bar of following sizes complete as required.

ESTIMATE FOR FIRE EXTINGUISHER.:-

Supply, installation, testing and commissioning ABC (Powder Type) Fire Extinguisher of capacity 04 Kg. Cylinders ISI marked with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and conforming to IS:15683/2006

Supply, installation, testing and commissioning ISI marked (IS:15683/2006) Fire Extinguisher, Carbon-di-oxide type capacity 4.5 Kg. Flat base including valve, discharge hose of not less than 10 mm dia, 1M long and complete in all respects including initial fill with CO2 gas conforming to IS:307-1966 filled to a filling rate of not more than 0.667 and walll suspension braket.

Supply, installation, testing and commissioning A class Type Fire Extinguisher of capacity 09 Ltrs. Cylinders ISI marked with pressure indicating gauge, internal tube, squeeze lever type valve pressured by Nitrogen complete in all respects including wall suspension bracket and conforming to IS:15683/2006

Description

Supply, installation, testing and commissioning of following CCTV

Supply, installation, testing, Commissioning of IR Fixed IP Metal Dome Camera with 1/2.7” CMOS, 2.0 Mega pixel and FPS: 20 fps- 1620x1080 /1280x720, 2.8 MM Fixed Lens, True Day / Night with ICR on Sensor, H.265, H.264 Compression, Support IE Operation and CMS Operation, Support ONVIF, IP 66 Outdoor Housing, Power Supply: 12V DC Input G PoE IEEE 802.3, IR distance minimum 30 Meters true Visual Distance, SMT IR LED Supreme Night Visibility G Uniform IR with LED, Illumination - Color: [email protected] (AGC OFF), B/W: 0 Lux @ (IR ON) etc. including all mounting base / bracket and accessories as per drawing G specification. Complete in all respect. Certifications - CE /UL / EN / FCC G BIS, (For Indoor Use).

Supply, installation, testing, Commissioning of IR Fixed IP Metal Bullet Camera with 1/2.7” CMOS, 2.0 Mega pixel and FPS: 20 fps- 1620x1080 /1280x720, 3.6 MM Fixed Lens, True Day / Night with ICR on Sensor, H.265, H.264 Compression, Support IE Operation and CMS Operation, Support ONVIF, IP 66 Outdoor Housing, Power Supply: 12V DC Input G PoE IEEE 802.3, IR distance minimum 30 Meters true Visual Distance, SMT IR LED Supreme Night Visibility G Uniform IR on LED, Illumination - Color: [email protected] (AGC OFF), B/W: 0 Lux@ (IR ON) etc. including all mounting base / bracket and accessories as per drawing G specification. Complete in all respect. Certifications - CE / UL / EN / FCC G BIS, (For Outdoor Use).

Supply, installation testing and commissioning of 32 Inch Ultra HD (4K) LED Smart TV having following features – 4 K ultra HD up to 3840 x 2160 resolution, 2 USB, 3 HDMI, 4 K IPS display, wide viewing angle, quad core processor, 4 K active HDR, 50 Hz refresh rate, HDR dynamic tone mapping, picture mode - Vivid, Standard, Eco, Cinema, Sports, Game, HDR Effect, (ISF) Expert (Bright Room), (ISF) Expert (Dark Room), HEVC codec – 4 K@60P-10bit, CVBS + Audio, Y, Pb, Pr,

Supply and fixing of MS conduits in following sizes including cost of junction boxes, bends, elbows, sockets, tees etc. laying in slab cutting of chase in wall / slab / floor etc. and making good or surface mounted including all fixing hardware, complete in all respect.

20 MM dia of 1.6 MM thick MS conduit with all required accessories.

25 MM dia of 1.6 MM thick MS conduit with all required accessories.

Supply, installation, testing, and commissioning of solid bare electrolytic grade copper, 23 AWG, EIGHT pair, unarmoured category CAT 6 A LAN cable consisting of insulation of polyolefin, twisted into two cores, four pair each pair twisted, outer sheath FR / LSZH, fully complies with the IEEE for the safe delivery of power over Lan / ethernet according to TIA TSB-184A. The cable shall have flexible jacket and ripcord for easy strippability, including terminations required at both the ends. Complete in all respect.

Supply, making termination and commissioning of Cat-6 cable including providing of RJ45 modular male - female plugs in existing cable. The rate shall include the cost all the necessary accessories as per specification. Complete in all respect.

Supply, installation, testing, and commissioning of solid bare electrolytic grade copper, 23 AWG, EIGHT pair, unarmoured category CAT 6 A LAN cable consisting of insulation of polyolefin, twisted into two cores, four pair each pair twisted, outer sheath FR / LSZH, fully complies with the IEEE for the safe delivery of power over Lan / ethernet according to TIA TSB-184A. The cable shall have flexible jacket and ripcord for easy strippability, including terminations required at both the ends. Complete in all respect.

OUTDOOR UNITS

Supply of variable refrigerant flow (VRF) system, suitable to operate at -20° to 520C ambient temperature comprising of the following and complete as per specifications:

Heating & Cooling - 22HP (17.6TR) Outdoor Unit

Heating & Cooling - 18HP (14.4TR) Outdoor Unit

Heating & Cooling - 26HP (20.8TR) Outdoor Unit

Heating & Cooling - 24HP (19.2TR) Outdoor Unit

Supply of Indoor units

Supply of Concealed type Indoor Unit with fittings. Consisting of fan, Four speed motor,coil Section with DX coil, outer cabinet,filter, insulated drain pan,including all accessories.Cable from indoor unit to socket and headers etc. which shall be supplied by the OEM of VRF system. complete as required. Make - HITACHI

1.5HP (1.2TR) Hi-Wall Type Indoor Unit

2.0HP (1.6TR) Hi-Wall Type Indoor Unit

12.0HP (9.6TR) In The Ceilling Type Indoor Unit

4.0HP (3.2TR) 4-Way Cassette Type Indoor Unit

5.0HP (4.0TR) 4-Way Cassette Type Indoor Unit

REMOTE CONTROLLER :

Wireless Remote for In The Ceiling Type Indoor Units

Wireless Remote for 4 Way Cassette Type Indoor Units

Wireless Remote for HI WALLType Indoor Units

Receiver Kit for In The Ceilling Type Indoor Units

Receiver Kit for 4 Way Cassette Type Indoor Units

Supply of Imported Control Systems & Y-Joints :

Y JOINT/Refnets for IDU

Outdoor Jointing Kit

INSTALLATION & LOW SIDE WORKS

Installation, testing and commissioning of Variable Refrigerant Flow System

Outdoor Units

Heating & Cooling - 22HP (17.6TR) Outdoor Unit

Heating & Cooling - 18HP (14.4TR) Outdoor Unit

Heating & Cooling - 26HP (20.8TR) Outdoor Unit

Heating & Cooling - 24HP (19.2TR) Outdoor Unit

Installation, testing and commissioning of the above VRF Indoor units:

1.5HP (1.2TR) Hi-Wall Type Indoor Unit

2.0HP (1.6TR) Hi-Wall Type Indoor Unit

4.0HP (3.2TR) 4-Way Cassette Type Indoor Unit

5.0HP (4.0TR) 4-Way Cassette Type Indoor Unit

12.0HP (9.6TR) In The Ceilling Type Indoor Unit

REFRIGERANT PIPING:

Suction and Liquid Line Copper Piping for VRF

DRAIN PIPES OF INDOOR UNITS:

25 mm dia

SHEET METAL WORK

DUCT INSULATION

GRILL DIFFUSER

CANVAS

Transmission & Control Wiring

2C x 1.5 Sq mm (Unarmoured)

Supply and charging of Refrigerant R410A

Lifting & Sifting charge

Nitrogen testing & vaccum work

Description

Paddle court

Description

Pickle ball 6.1m x 13.40m ( 1court)

6 LAYER SYNTHETIC SYSTEMS 1. RESURFACER COURSE (2LAYER) 2. PRO-CUSHION COURSE (2 LAYER) 3. TEXTURECOLOURS COURSE (1 LAYER) 4. TOP COLOURS COURSE (1LAYER) 5. WHITE LINE MARKING AS PER INTERNATIONAL STANDARD (2 LAYER).size (6100mm x13400mm) 1 court

EDGE WALL 1. RETAINING WALL TO BE CONSTRUCTED ON ALL THE FOUR SIDES OF RR MASONRY OF 6" THICK, UPTO MAXIMUM HEIGHT OF 0.5'

6 INCHES OF SUB BASE M 10 GRADE PCC WITH SLOPE AS PER SITE FOR WATER OUTFLOW

Description

Cricket practise pitch

SET UP POLE STRUCTURE (* VERTICAL POLES : 2" X 2" TRUSS POLES * HORIZONTAL POLES : 2." X 2" IN THREE LAYER* BOTTOM POLES : 2" X 2" * INCLUDE FABRICATION, GROUTING, LABOR, INSTALLATION.

GRAVITY BOWLING MACHINE MODEL - ADVANCE Speed range : 30-99 + MPH (159 KMPH) Intelligent Digital LCD back-lit control panel showing speed and bias display, error messages, diagnostics Microprocessor based circuit programed for accurate delivery Brushless motor- most advance DC motors with built in speed and load sensing unit Low power consumption and maintenance free advance motors Optional Tab based (android/Apple) Wireless enabled remote, controlled Via WIFI by any smart mobile phone Throws all type of cricket leather ball, cricket tennis balls & lite dimple ball (NEW) Throws spin, swing and fastballs with repetitive Lateral and vertical adjustments allow user to throw various pitches Concave wheels made of PU for precision balance, …accuracy, and excellent durability Perfect for both indoor and outdoor use Easily set up and transported Optional 12 ball Auto feeder with 2 speed available Package includes tripod stand Shipping Weight – 27kgs Power – can run for 2.5hrs to 4hrs on 12v battery (36-45AH) OR mains Power transformer 220~230V AC converted to 12VDC

ITEMS

Providing & fixing of white vitreous china pedestal type water closet (Europian type) with seat and lid, 10litre low level white vitreou china flushing cistern & cp flush bend with fittings & CI brackets, 40mm flush bend, overflow arrangement with special of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors whereever required.

W.C pan with ISI marked wiyh solid plastic seat and lid

Providing & fixing white vitrous china flat back or wall corner type lipped front urinal basin of 430X260X350 mm and 340X410X265 mm sizes respectively with automatic flushing cistern with standerad flush pipe C.P brass spreaders with brass unions and GI clamps complete including painting of fittings and brackets, cutting and making good the walls and floors whereever required:

One urinal bain with 5 litre white P.V.C automatic flushing cistern

Providing and fixing wash basin with C.I brackets, 15 mm cp brass pillar taps, 32 mm cp brass waste of standar pattern, including painting of fittings and brackets, cutting and making good the walls requred:

White vitreous china wash basin size 550X 400mm with single 15 mm C.P brass pillar tap

Providing & fixing of CP brass pressmatic self closing pillar tap (Hindware cat. No. F310001ACP/ Jaquar cat no.PRS-031 / or approved equivalent ) as per direction of Engineer-Incharge.

Providing and fixing C.P brass bib taps long body of Kohler Cat No. 16093IN-4-CP / Hindware Cat. No.: F200011FT / Jaquar cat no.Con - 107KN or approved equivalent) including cutting and making good the walls wherever required complete to the satisfaction of Engineer in charge.

Providing and fixing 40mm dia SS Bottle Trap (Jaquar cat no. ALD-CHR-770 / Hindware F850016 or approved equivalent) and other ancillary fittings, cutting and making good the walls wherever required complete as per directions of Engineer-Incharge.

Providing & Fixing of 15 mm dia angle valve of ( Kohler cat no. 80155IN-4-CP / Hindware cat no. F280004 / Jaquar cat no. FLR-5053N or approved equivalent) with C.P. brass wall flange with any other items complete including unplasticised PVC connection pipe with brass unions of 45cm length & 15mm nominal bore complete in all respect.

Providing and fixing push fit type WC pan connector ( Kohler Cat No.1036902 / Mcalpine Cat no. MAC - 1 or approved equivalent) with high quality polypropylene plastic with rubber sealing washer. The internal rubber gasket in EASI-fit pan connectors and extremely water tighsupplied spring loaded seal guard. single mould sealing fins made of flexible EVA body, including bush/adaptor. complete in all respect.

Providing and fixing soil, waste and vent pipes

100mm dia

Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Providing and fixing M.S. holder bat clamps of approved design to sand cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10 x 10 x 10 cm of 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) including cost of cutting holes and making good the walls etc.

For 100mm dia pipe

Providing and fixing plain bend of required degree.

100mm dia

Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Providing and fixing single equal plain junction of required degree :

Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Providing and fixing terminal guard.

Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe.

100mm dia

SS 304 grade coupling with EPDM rubber gasket

Providing and fixing M.S stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter.

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

100mm inlet and 100mm outlet

Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Painting sand cast iron / centrifugally cast (spun ) iron soil, waste vent pipes and fittings with paint of any color such as chocolate grey ,or buff etc .over a coat of primer (of approved quality ) for new work .

100 mm diameter pipe

Providing and fixing G.I reducer/hopper/elbow (Floor Drain) of 100 x 50mm, complete as per instructions of the Engineer in charge.(grating and G.I pipe to be paid separately)

Providing and fixing 100mm dia G.I. inlet fitting consisting of 100mm dia main G.I pipe with multiple G.I. sockets (Inlets) of required diameter welded to it (as per site requirement) and fixing the same to C.I trap and setting in cement concrete, complete as per instructions of the Engineer in charge.

Providing and fixing Heavy class SS grating with Anti Cockroach Floor Trap of approved design including setting in floor with cement motor to match with floor finish as per direction of Engineer-Incharge.

Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers comelete.

Providing and fixing 600 x 120 x 5 mm glass shelf with edges rounded off supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm an effective height of 88 mm, weighthan 190 gms

Providing and fixing on wall face unplasticised PVC (working pressure 4 kg per sqcm) rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

110mm diameter

Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised-PVC rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

110mm bend

110mm Shoe

Providing and fixing unplasticised-PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S screws or required length including cutting brick work and fixing on cement mortar (1:4) 1 cement:4 coarse sand and making good the wall etc. complete.

Providing and fixing mirror of superior glass(approved quality)and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Rectangular shape 1500x450 mm

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long 200mm wide with minimum distances of 37mmfromwall facewith concealedfittingsarrangementofapprovedqualityandcolour,weighing not less than 88 gms.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diametre and weighing not less than 440 grams.

Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes hyaving thermal stability for hot &coldwater supply, including all CPVC plain & brass threaded fitting, including fixing the pipewith clampsat 1 m spacing. This includesjointing of pipes &fittingwith one step CPVC solvent cement and cost ofcutting chases and making good the same including testing ofjoints complete as per direction ofEngineer in Charge.

20mm nominal outer dia. Pipes.

25mm nominal outer dia. Pipes.

Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes hyaving thermal stability for hot &coldwater supply, including all CPVC plain & brass threaded fitting, including fixing the pipewith clampsat 1 m spacing. This includesjointing of pipes &fittingwith one step CPVC solvent cement and cost ofcutting chases and making good the same including testing ofjoints complete as per direction ofEngineer in Charge.

20mm nominal outer dia. Pipes.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

25mm nominal bore

Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes hyaving thermal stability for hot &coldwater supply, including all CPVC plain & brass threaded fitting, including fixing the pipewith clampsat 1 m spacing. This includesjointing of pipes &fittingwith one step CPVC solvent cement and cost ofcutting chases and making good the same including testing ofjoints complete as per direction ofEngineer in Charge.

25 mm nominal outer dia. Pipes(From terrace to Ground floor

32 mm nominal outer dia. Pipes(From terrace to 1st floor toilet)

40mm nominal outer dia. pipes (From boaring to water tank)

65 mm nominal outer dia. Pipes (For ring line on terrace)

Providing & fixing Auto Air vent for cold water supply risers, suitable for pressure not less than 15 Kg/Sq.cm.

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1cement : 1 fine sand) including testing of joints etc. complete

150 mm diameter

Providing and fixing square mouth S.W. gully trap grade 'A' complete with C.I. Grating brick masonry chamber with bricks of class designation 75 and water tight C.I. Cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design

150x100 mm size P type

With FPS bricks class designation 75

Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1:4 (1 cement: 4 coarse sand) R.C.C. top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design.

Inside size 90x80 cm and 45 cm deep including CI Cover with frame (light duty as per IS:12592) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg ( weight of cover 23 kg and weight of frame 15 kg)

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Making connection of drain or sewer line with existing manhole including breaking into and manhole good the wakll, floors with cement concrete 1:2:4 mix ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 Coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc, complete: .

For pipe 100 to 250 mm diameter

Particulars

Water Supply,Sanitary & Drainage

TUBEWELL

SEPTIC TANK

SR Ref.

Item Code (SOR)

WIRING

Wiring for light point/ fan point/ exhaust fan point with 1.5 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular type switch, modular Plate, suitable size G.I box etc. as required.

Group C

Wiring for circuit/ submain wiring along with earth wire with the following sizes PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire(For Ckt,Power and 6A )

2 X 4 sq. mm + 1 X 4 sq. mm earth wire(For AC one-to one and AC indoor VRF)

2 X6 sq. mm + 1 X 6 sq. mm earth wire(For AC Indoor VRF 9.2TR.)

4 X 10 sq. mm + 1 X 10 sq. mm earth wire ( From panel to DB-1&2 ) Location-- Stair inner wall

4 X 16 sq. mm + 1 X 6 sq. mm earth wire ( for each VRF outdoor unit )

GI BOX & SWITCH ACCESSORIES

Moduler GI box for 2 module

Moduler GI box for 3 module

Moduler GI box for 4 module

S.P 5/6 amps,one way moduler switch ISI marked

S.P 5/6 amps, moduler socket outlet ISI marked

Stepped type modular fan regulator (2Moduler)

25 amps modular type A.C unit set with ON/OFF MCB

6 pin 25 amp modular type socket ISI marked

Supplying and fixing modular Blanking plate on the existing modular plate and switch box excluding modular plate as required.

Supplying and fixing following modular base and cover plate on exhisting modular metal box etc. as required.

1/2 module

3 module

4 module

Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or recess including providing and fixing 6 pin, 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular type switch connection, painting etc. as required. (for power )

Supplying and fixing 2 pin 5/6 amp ceiling rose on the exhisting junction box/wooden block including connection etc as required

Supplying and fixing batten/angle holder including connection etc. as required

DB'S MCB

4 Way (4+12) double door, Horizantal (For Ground and 1st floor DB )

Supplying and fixing following rating, 240/415 volts, ‘C’ series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

6/32 amps, single pole,

40A to 63A SPN

25amps, rating, 2 pole RCCB, 30ma

FIXTURE AND FITTING

supply and installation of regular/standard model A.C ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00 air delivery minimum 210 cum/min including wiring the down road of length (upto 30 cm) with 1.5 sq. mm FRLS pvc insulated copper conductor etc as required.

supply and installation of following sweep sizees PVC/ABS square body exhaust fan with automatic opnable louver shutter in existing opening including making connection, testing etc. as required

250 mm sweep(1300/1400RPM)

Supplying and fixing surface mounted following types LED downlighter with minium efficiency 100lm/w in pressure dia-cast alluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq mm FRLS PVC insulated copper conductor cable etc as required.

Supplying and fixing fotrlowing types LED Flood light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on poleibuilding including connection earthing the body etc as required.

Supplying and fixing of following types lamp in the existing electrical fitting /fixtures etc. as required.

12 Watt LED lamp

Supplying and fixing of 300 wattLED high bay light ,5000K to 5700K Cool white 140 lum/watt lamp in the etc. as required. Including hanger 1.5 mts. from ceiling all assoceries

EARTHING

Earthing with Copper earth Plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe 2.7 meter long etc. with charcoal/ coke and salt as required.

8SWG copper wire(4.0mm dia.)

25mm dia. ISI marked, PVC conduit

10mmX25mm long tinned brass bolt with nut etc.

LT POWER CABLE

Supply, and instaling of 3.5CX240 sq. mm XLPE insulated PVC sheathed(HEAVY DUTY) steel armoured electric cable with alluminium conductor ISI marked LT Cables(From main panel to VRF Panel )

Supply, and instaling of 3.5CX 300 sq. mm XLPE insulated PVC sheathed(HEAVY DUTY) steel armoured electric cable with alluminium conductor ISI marked LT Cables(From Transformer to panel )

Brass compression gland for(63 mm) 3.5C X 240 sq.mm 1.1kv grade cable

Brass compression gland for(70 mm) 3.5C X 300 sq.mm 1.1kv grade cable

Alluminium lugs for 120 sq. mm cable

Alluminium lugs for 150 sq. mm cable

Alluminium lugs for 240 sq. mm cable

Alluminium lugs for 300 sq. mm cable

Laying of one number PVC sheated/XLPE power cable of 1.1KV grade of following size direct in ground including excavation,and refilling the trench etc. excluding sand cushoining and protecting covering

above 185 sq.mm upto 400 sq.mm

PANEL(LOCATION-- BELOW STAIR)

providing and fixing following rating and breaking capacity MCCB in existing cubicale panel board including drilling holes cubicle panel, making connections etc. As required.

400A, 50KA FP MCCB

providing and fixing following capacity four pole ON-LOAD/Panel mounted changeover switchs inside the exsiting cubicle panel board including drilling holes in cubicle panel, making connections etc. as required (but without bus bar copper strip)

400A four pole

S/F of copper strip for bus bar chamber in exist cubical pannel(2X32X6mm 1.705kg/mtr.)

supplying and fixing wall/floor mounted cubical panel board,febricated with 16 gauge iron sheet, suitable for panel mounted switch disconecter including bus bar chamber, insulator and painting etc. As required

Supply and fixing digital multimeter, three phase with CT coil and RYB pilot lamp in the existing cubical panel board including drilling holes in the panel board, making connection etc. As required.

4 sq mm mm ISI marked,FRLS PVC insulated single core copper conductor cable

10 sq mm mm ISI marked,FRLS PVC insulated single core copper conductor cable

250A, 50KA FP MCCB( panel outgoing)

Supplying and fixing following rating, double pole 240/415 volts, ‘C’ series, isolator suitable for inductive loads of following in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40A to 63A DP (panel outgoing)

40A to 63A FP (panel outgoing )

PANEL(LOCATION-- TOP STAIR)

providing and fixing following rating and breaking capacity MCCB in existing cubicale panel board including drilling holes cubicle panel, making connections etc. As required.

250A, 50KA FP MCCB

S/F of copper strip for bus bar chamber in exist cubical pannel(32X6mm 1.705kg/mtr.)

supplying and fixing wall/floor mounted cubical panel board,febricated with 16 gauge iron sheet, suitable for panel mounted switch disconecter including bus bar chamber, insulator and painting etc. As required

Supply and fixing digital multimeter, three phase with CT coil and RYB pilot lamp in the existing cubical panel board including drilling holes in the panel board, making connection etc. As required.

1.5 sq mm mm ISI marked,FRLS PVC insulated single core copper conductor cable

16 sq mm mm ISI marked,FRLS PVC insulated single core copper conductor cable

Supplying and fixing following rating, double pole 240/415 volts, ‘C’ series, isolator suitable for inductive loads of following in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40A to 63A FP (panel outgoing )

TRANSFORMER

Supplying and installing 200KVA, 11/0.433KV, Copper Wound Dist. Transformer OLTC.

CAMPOUS POLE & LIGHT

6 metre height octagonal hot-dip galvanised street light poles with top dia. (A/F) 70 mm and bottom dia. (A/F) 130 mm and made of 3mm thick sheet, base plate diamension 220X220X12 mm including suitable size foundation bolts etc.

Supplying and fixing pole mounted junction box/fuse box for single phase by 2 pole low wattage street light pole with all accessories and connection etc. as required.

Supplying and laying of following size DWC HDPE pipeISI marked along with all accessories like socket, bend.couplers etc. conforming to IS 14930, part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level ) including excavation and refilling the trench but excluding stand cushioning and protective covering etc. complete as required. in the existing trench, complete as required.

63mm dia. (OD - 51 mm & ID 76 mm nominal )FOR ROAD AROUND

160 mm dia. (OD - 160 mm & ID 135 mm nominal )From Transformer to Panel

90 watt LED street light with pressure dia. cast housing, toughend glass, IP 65 protection and complete with electronic driver etc. minimum efficiency 100lm/w

Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with alluminium conductor for working voltage upto 1.1 kv as required.

16 sq. mm 2 core including toilet

4.0 sq. mm ISI marked, FRLS PVC insulated single core copper conductor cable(For loop pole body earth)

Constructing brick masonary chamber for underground C.I inspection chamber and bends with bricks in cement mortar 1:4(1 cement:4coares send) C.I cover with frame (light duty) 455X610mm internal diamensions,total weight of cover with frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg) R.C.C top slab with 1:2:4 mix(1 cement: 2 coares sand : 4 graded stone aggregate 20 mm nominal size ), 12 mm thick with cement mortar 1:3(1 cement : 3 coares sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design.

Inside diamensions 455X610 mm and 45 cm deep for single pipeline

With common burnt clay F.P.S (non modular) bricks of class designation 7.5

Supplying and installing 20 kVA 3 PH DG set with Engine Model 3GK550TC 4SR1& coupled with Alternator Water Cooled with Standard Panel, Acoustic Enclosure & Base frame. (For detailed product specification kindly refer Annexure 2)

Description

Badminton court (As per quotation)

Supplying and installing Maple Wood Flooring (BWF Approved) Imported USA Hard maple wood flooring approved by BWF & FIBA STANDARDS. Maple plank -21mm Pine runner-45mm Rubber pad-19 mm Includes vapor barrier, pinewood runners with EPDM cushioning pads and maple surface boards finished with polyurethane polish.Ensures superior performance, durability and player comfort suitable for professional use.

Yonex Vinyl 4.5mm Complete Setup

SUM TOTAL AMOUNT

BLOCK

Katihar

Lk=Lead on kuchcha road Hu=Houlage on unsurface road Hs =Houlage on surface road Hk =Houlage on kuchcha road

Calculatoin of Railway Frieght

banka

as per block

Loading charges on railway wagon and unloading cost on

by road

i) Railway Fair for class 150 for 201 to 225 km (221 KM)

mirzachauki

as per block

by train

by road