Financial BO

Works

Civil Works

Construction of a hot-mix road from Ambedkar Park to the Main Market intersection, via Biriya Baba Turn

Directorate of Local Bodies UP

Npp Tilhar | Shahjahanpur, Uttar Pradesh

Amount: ₹59.7 LCloses: 21 Apr 2026Closed

Timeline

Published1 Apr 2026
Closed21 Apr 2026
Technical Evaluation30 Apr 2026
Financial Evaluation30 Apr 2026
Award—

Bids

Percentage

4 Bids30 Apr 2026

#	Company	Quoted %	Amount	Rank	Status
1	shubhamconstruction L1₹59.7 LAdmitted-Finance	-0.01%	₹59.7 L	L1	Admitted-Finance
2	M/S PRAMOD KUMAR GUPTA L2₹59.7 L+₹596.80 (0.01%)Admitted-Finance	+0.00%	₹59.7 L+₹596.80 (0.01%)	L2	Admitted-Finance
3	M/S SANJEEV KUMAR GUPTA THEKEDAR L3₹60.0 L+₹30,436.82 (0.51%)Admitted-Finance	+0.50%	₹60.0 L+₹30,436.82 (0.51%)	L3	Admitted-Finance
4	M/s Shri Ganesh Enterprises Not Admitted-Fee/PreQual/Technical MOH HUSAINPURA SHAHJAHANPUR	-	-	-	Not Admitted-Fee/PreQual/Technical Not Complied with technical specification

Tender Value

₹59.7 L

EMD Value

₹6.0 L

Closing Date

21 Apr 2026, 5:00 pmClosed

Tender Inviting Organisation

Name

Executive Officer

Address

Npp tilhar

Work Description

Construction of a hot-mix road from Ambedkar Park to the Main Market intersection, via Biriya Baba Turn

Tender Information

Tender ID

2026_DOLBU_1132360_2

Reference Number

641/NPPT/2025-26

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Period of Work

90 days

Location

Npp Tilhar

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

2 documents required · 2 mandatory

Fee/PreQual/Technical

RequiredTechnical Bid (.pdf)

Finance

RequiredFinancial Bid (.xls)

Fee & Financial Details

Tender Fee Amount

₹7,292

Tender Fee Exemption Allowed

Yes

Tender Fee Payable To

Npp

EMD Fee Amount

₹6.0 L

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

30 Apr 2026

Published

1 Apr 2026

Bid Opening

22 Apr 2026

Download Starts

1 Apr 2026

Download Ends

21 Apr 2026

Submission Starts

1 Apr 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (6 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Laying and Jointing PVC Pipe. Heading
1.01	Providing and applying tack coat with VG_10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with machanical broom .	-	Sqm	-	-
1.02	Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 grade @ 4.50% minimum as per job mix , transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT & H Specifications Clause 505 complete in all respects. Grade II	-	Sqm	-	-
1.03	Providing and applying tack coat with VG_10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with machanical broom .	-	Sqm	-	-
1.04	Providing and laying bituminious concrete with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.40% as per job mix and filler, transporting the hot mix to work site,laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT & H Specifications Clause 507 complete in all respects.	1	Cum	-	-
1.05	Providing & laying of hot applied thermo plastic compound 5.0 mm thick including reflect rising glass beads @ 500 gm per Sq.M. area, thickness of 5.00 mm is exclusive of surface applied glass beads as per IRC 35 including cost of all materials, labor, machineries, T & P etc. required for proper completion of work including all other charges and taxes. The finished surface to be level, uniform and free from streaks and holes as per MORT&H specification No. 803..8.13	-	Sqm	-	-
14.02	Providing & laying of hot applied thermo plastic compound 2.5 mm thick including reflect rising glass beads @ 250 gm per Sq.M. area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35 including cost of all materials, labor, machineries, T & P etc. required for proper completion of work including all other charges and taxes. The finished surface to be level, uniform and free from streaks and holes as per MORT&H specification No. 803.	-	Sqm	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.03 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Bid Opening

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 23.30 MB

Work Item Documents

BOQ_2113369.xls

BOQ • 0.30 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

shubhamconstruction

L1₹59.7 LAdmitted-Finance

M/S PRAMOD KUMAR GUPTA

L2₹59.7 L+₹596.80 (0.01%)Admitted-Finance

M/S SANJEEV KUMAR GUPTA THEKEDAR

L3₹60.0 L+₹30,436.82 (0.51%)Admitted-Finance

M/s Shri Ganesh Enterprises

Not Admitted-Fee/PreQual/Technical

MOH HUSAINPURA SHAHJAHANPUR

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Laying and Jointing PVC Pipe. Heading
1.01	Providing and applying tack coat with VG_10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with machanical broom .	-	Sqm	-	-
1.02	Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 grade @ 4.50% minimum as per job mix , transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT & H Specifications Clause 505 complete in all respects. Grade II	-	Sqm	-	-
1.03	Providing and applying tack coat with VG_10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with machanical broom .	-	Sqm	-	-
1.04	Providing and laying bituminious concrete with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.40% as per job mix and filler, transporting the hot mix to work site,laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT & H Specifications Clause 507 complete in all respects.	1	Cum	-	-
1.05	Providing & laying of hot applied thermo plastic compound 5.0 mm thick including reflect rising glass beads @ 500 gm per Sq.M. area, thickness of 5.00 mm is exclusive of surface applied glass beads as per IRC 35 including cost of all materials, labor, machineries, T & P etc. required for proper completion of work including all other charges and taxes. The finished surface to be level, uniform and free from streaks and holes as per MORT&H specification No. 803..8.13	-	Sqm	-	-
14.02	Providing & laying of hot applied thermo plastic compound 2.5 mm thick including reflect rising glass beads @ 250 gm per Sq.M. area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35 including cost of all materials, labor, machineries, T & P etc. required for proper completion of work including all other charges and taxes. The finished surface to be level, uniform and free from streaks and holes as per MORT&H specification No. 803.	-	Sqm	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Laying and Jointing PVC Pipe. Heading

1.01

Providing and applying tack coat with VG_10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with machanical broom .

Sqm

1.02

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 grade @ 4.50% minimum as per job mix , transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT & H Specifications Clause 505 complete in all respects. Grade II

Sqm

1.03

Providing and applying tack coat with VG_10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with machanical broom .

Sqm

1.04

Providing and laying bituminious concrete with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.40% as per job mix and filler, transporting the hot mix to work site,laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT & H Specifications Clause 507 complete in all respects.

Cum

1.05

Providing & laying of hot applied thermo plastic compound 5.0 mm thick including reflect rising glass beads @ 500 gm per Sq.M. area, thickness of 5.00 mm is exclusive of surface applied glass beads as per IRC 35 including cost of all materials, labor, machineries, T & P etc. required for proper completion of work including all other charges and taxes. The finished surface to be level, uniform and free from streaks and holes as per MORT&H specification No. 803..8.13

Sqm

14.02

Providing & laying of hot applied thermo plastic compound 2.5 mm thick including reflect rising glass beads @ 250 gm per Sq.M. area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35 including cost of all materials, labor, machineries, T & P etc. required for proper completion of work including all other charges and taxes. The finished surface to be level, uniform and free from streaks and holes as per MORT&H specification No. 803.

Sqm