Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹56.9 LAdmitted-Finance | -6.25% | ₹56.9 L | L1 | Admitted-Finance |
Tender Value
₹60.7 L
EMD Value
₹1.2 L
Closing Date
13 Mar 2026, 6:00 pmClosed
GM RSRDC LTD JAIPUR
GM RSRDC LTD SETU BHAWAN, JHALANA DOONGARI, JAIPUR
Supply, installation, testing and commissioning of Kitchen Equipments at CSOI, HCM RIPA, Jaipur
2026_RSRDC_543547_1
RSRDCC NIT 748/2025-26 Dated 27.02.2026
Open Tender
Civil Works - Buildings
Percentage
90 days
CSOI, HCM RIPA
PLEASE REFER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹1,180
PD RSRDC UNIT V JAIPUR THROUGH NEFT/RTGS/IMPS
₹1.2 L
24 Mar 2026
4 Mar 2026
18 Mar 2026
4 Mar 2026
13 Mar 2026
5 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | SITC of Stainless steel 304 grade PICK UP WORK COUNTER with sink and three side covering and two Overhead Shelf with Heating element. | 2 | EACH | 52,296 | ₹1,04,592 |
| 2 | Overall dimension : 1500X700X850 (LXWXH) mm
Sink size : 450X450X250 mm made up of SS 304 grade with Mixer faucet (make T&S or aluids or equivalent), coupling and waste pipe.
Top of table to be made in 16 SWG Stainless steel AISI 304 Grade sheet bent 50mm & 12mm all sides, nicely edge-cut, welded & braised and to be covered on 3 side with same sheet.
TOP FRAME made with corner angle frame of 38X38X3mm SS 304 grade and apron should be attached with SS Stiffner of size 12X25X100X25X12.
2 Nos. OVER HEAD SHELF of size 1500X300 mm & 50mm high back splash placed at 350mm intervals made of 1.2mm thick SS304 grade sheet bent 25mm & 12mm all sides with HEATING ELEMENT supporting on 25 MM 4 Nos. square pipe.
Counter Base Legs made up of 40X40X1.2 MM SS 304 grade PIPE and BULLET TYPE ADUJSTABLE BUSH.
ALL MATERIAL AISI SS 304 including sheet, pipe, angle, nut & bolt.
Undershelf made of 1.2MM SHEET WITH 12X25X100X25X12 mm undershelf stiffner.
Approved make of SS 304 grade sheet of Jindal, Tata, SAIL or equivalent. | 0 | Each | 0 | ₹0 |
| 3 | SITC of GARBAGE BIN 120 LTR capacity | 5 | EACH | 7,316 | ₹36,580 |
| 4 | Overall dimension : 48X55X92CM
PRIMARY MATERIAL 100% VIRGIN HIGH DENSITY POLYETHYLENE HDPE, BODY UV STABILIZED POLYETHYLENE WITH SOLID RUBBERIZED WHEEL and paddle operated lid.
APPROVED MAKE NILKAMAL/ CAMBRO OR EQUIVLENT | 0 | Each | 0 | ₹0 |
| 5 | SITC of DISH STORAGE CABINET WITH HOT SLIDING DOOR | 4 | EACH | 39,798 | ₹1,59,192 |
| 6 | Overall dimension : 1500X350X850 (LXWXH) mm
Top of table to be made in 16 SWG Stainless steel AISI 304 Grade sheet bent 50mm & 12mm all sides, nicely edge-cut, welded & braised and to be covered on 3 side with same sheet.
TOP FRAME made with corner angle frame of 38X38X3mm SS 304 grade and apron should be attached with SS Stiffner of size 12X25X100X25X12.
Counter Base Legs made up of 40X40X1.2 MM SS 304 grade PIPE and BULLET TYPE ADUJSTABLE BUSH.
ALL MATERIAL AISI SS 304 including sheet, pipe, angle, nut & bolt.
2 nos. Undershelf made of 1.2MM sheet supported on 12X25X100X25X12 mm undershelf stiffner with 2nos. insulated double skin sliding doors of 1.2mm thick SS sheet .
Approved make of SS 304 grade sheet of Jindal, Tata, SAIL or equivalent. | 0 | Each | 0 | ₹0 |
| 7 | SITC of DISH STORAGE CABINET WITH HOT SLIDING DOOR | 1 | EACH | 44,288 | ₹44,288 |
| 8 | Overall dimension : 2400X350X850 (LXWXH) mm
Top of table to be made in 16 SWG Stainless steel AISI 304 Grade sheet bent 50mm & 12mm all sides, nicely edge-cut, welded & braised and to be covered on 3 side with same sheet.
TOP FRAME made with corner angle frame of 38X38X3mm SS 304 grade and apron should be attached with SS Stiffner of size 12X25X100X25X12.
Counter Base Legs made up of 40X40X1.2 MM SS 304 grade PIPE and BULLET TYPE ADUJSTABLE BUSH.
ALL MATERIAL AISI SS 304 including sheet, pipe, angle, nut & bolt.
2 nos. Undershelf made of 1.2MM sheet supported on 12X25X100X25X12 mm undershelf stiffner with 2nos. insulated double skin sliding doors of 1.2mm thick SS sheet .
Approved make of SS 304 grade sheet of Jindal, Tata, SAIL or equivalent. | 0 | Each | 0 | ₹0 |
| 9 | SITC of PICK UP UNDER COUNTER REFRIGERATOR with overhead shelves | 2 | EACH | 1,02,309 | ₹2,04,618 |
| 10 | REFRIGERATOR SIZE 1800X750X850mm
Capacity - 526 Ltr. (400W)
1.6 MM THICKNESS TOP WITHOUT BACK SPLASH,
ALL MATERIAL AISI 304 GRADE
0.9mm thick SS 304 grade sheet at back and base
SIX REMOVABLE & ADJUSTABLE SHELVES
THREE DOOR 304 INSULTAION DOUBLE SKIN DOOR
DOOR OPENING 400MM X600MM for placing of BAKING TRAY ,
AMBIENT TEMP 43 degree celcius TEMP WITH AIR COOLED OR AUTO DEFROST.
REFEGRATION GAS R-134 A with compressor and all necessary accessories complete.
DIGITAL READ OUT THERMOMETER, TIME DEALY AUTO START, FORCED DRAFT COOLING, condensing cooling light, defrost indicator, fan running indicator, high low temperature alarm.
50 MM PU FOAM ON ALL SIDE
2 Nos. OVER HEAD SELF of size 1500X300 mm & 50mm high back splash placed at 350mm intervals made of 1.2mm thick SS304 grade sheet bent 25mm & 12mm all sides with HEATING ELEMENT supporting on 25 MM 4 Nos. square pipe.
Counter Base Legs made up of 40X40X1.2 MM SS 304 grade PIPE and BULLET TYPE ADUJSTABLE BUSH.
APPROVED MAKE WILLIAMS BLR /HOSHIZAKI OR EQUIVALENT | 0 | Each | 0 | ₹0 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.31 MB
agrement.pdf
Tender Documents • 0.45 MB
AnnexureABCD_RTPPAct2012_AnnexureC.pdf
Tender Documents • 0.10 MB
various_Circulars_Office_Orders.pdf
Tender Documents • 0.32 MB
TenderDocument.pdf
Tender Documents • 1.01 MB
spltc.pdf
Tender Documents • 0.20 MB
LayoutofKitchen.pdf
Tender Documents • 0.33 MB
pdbankdetails.pdf
Tender Documents • 0.04 MB
BOQ_969306.xls
BOQ • 3.46 MB
corrigendumto_modifieddates05032026.pdf
PDF • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .