SPECIAL REPAIRS TO BLDG NO P-78 AND P-82 OF SMQs AND PROVN OF CERTAIN SANCTIONED MAJOR REVENUE AND MINOR WORKS AT HQTC (U) BANGALORE

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out and removing rubbish up to a distance of 50 metersoutside the periphery of the area etc complete all as specified and directeted.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation,etc or for shafts wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard/dense soil etc complete all as specified and directeted.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm etc complete all as specified and directeted.

Spreading and levelling earth filling in floors in layers and well ramming including watering as required etc complete all as specified and directeted.

M& L for sand cushioning including watering for floor and Interlocking tiles complete all as specified and directed

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point in soils etc complete all as specified and directeted.

M&L for Hard core of guage n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface etc complete all as specified and directeted.

M&L Moorum /red bajri filling in floors or pavings, laid in layers n exc 15 cm thick, spread, levelled and rammed including watering, etc complete all as specified and directeted.

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded aggregate as in foundationetc complete all as specified and directeted.

M&L for Plain Cement Concrete Type C1 , 1:3:6 (using 40 mm graded stone aggregate) for foundations, filling mass concrete etc and the like including use and waste of form work,weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directeted.

M&L for PCC type C 2, 1:3:6 type (using 40 mm graded stone aggregate) as in surface channels and drain etc complete all as specified and directeted.

M&L for Plain Cement Concrete Type B0 , 1:2:4 (using 12.5 mm graded stone aggregate) cast in situ in cills and other similar bands, plinth courses, parapets, copings, hold fast ,bed plates ,filling hollow section of pressed steel frame and the like including use and waste of form work,weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directeted.

M&L PCC 1:2:4, type B1 (using 20 mm graded stone aggregated) as in copping incl necessary form work etc complete all as specified and directeted.

M&L for Pre-cast cement concrete block masonry with solid blocks type C1, 1:3:6 ( 20 mm graded aggregate) exc. 10 cm in width and setting in mortar 1:6, complete etc complete all as specified and directeted.

M&L RCC 1:2:4, type B1 (using 20 mm graded stone aggregate as in pre-cast cover slabs for manholes incl necessary form work etc complete all as specified and directeted. (Reinforcement will be measured & paid separately)

M&L PCC 1:2:4, type B1 (using 20 mm graded stone aggregated) as in benching to manholes etc etc complete all as specified and directeted.

M&L for Providing pre-cast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type C1, 1:3:6 ( 20 mm graded aggregate) and setting in Cement mortar 1:4 , etc complete all as specified and directeted.

M&L for Reinforced Cement Concrete type A1, 1:1.5:3 (using 20 mm graded stone aggregate) for foundations, footing, plinth beams, bases for columns etc.complete all as specified & directed. (Reinforcement shall be measured and paid for separately)

M&L for Reinforced cement concrete type A1, 1:1.5:3 (using 20 mm graded stone aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directeted. (Reinforcement shall be measured and paid for separately)

M & L for reinforced cement concrete type A1, 1:1.5:3 (using 20 mm graded stone aggregate) in beams, cantilevers, lintels over 1.5 m span etc complete all as specified and directeted.(Reinforcement shall be measured and paid for separately)

M&L for Reinforced cement concrete type A1, 1:1.5:3 ( using 20mm graded aggregate ) as in column, pillars, piers, posts and struts complete all as specified & directed. (Reinforcement shall be measured and paid for separately)

Cutting holes exc 100 sqcm but n.exc 250 sqcm into or through cement concrete slabs, chajjas, etc. reinforced or otherwise etc complete all as specified and directeted.

Supply only liquid water proofing compound of approved quality. (Make : CICCO NO.1/SIKA/ACCO PROOF).

M&L for 25 mm thick Damp Proof Course in cement concrete 1:2:4, Type B-0 ( 12.5 mm graded aggregate) to horizontal or vertyical surfaces including necessary formwork etc complete all as specified and directeted.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc l0cm girth in brick walls etc complete all as specified and directeted.

Cutting holes in Stone masonery walls exc half brick but n. exc full brick wall in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required etc complete all as specified and directeted.

Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and directeted.

Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floorslabs, landings,chajjas and similar work; not excee ding 200mm thick(Horizontal or sloping) in chajjas; flat rough finished surfaces of concrete etc complete all as specified and directeted.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc complete all as specified and directeted.

Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc complete all as specified and directeted.

Use and waste of Formwork to edges of concrete flats, treads, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide,etc complete all as specified and directeted.

M&L 2nd class hard wood Plain fillets. square, rectangular or triangular, exc 13 Sqcm & n. exc 25sqcm in section, clean sawn, secured with screws etc complete all as specified and directeted.

S & F of 2nd class HW plain chowkhats and framed, rebated on the solid rounded or chamfered put together with glue pinned at jointsetc complete all as specified and directeted.

S&F 35 mm thick factory made 2nd Class Hard wood Glazed and skeleton shutter open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc, size of members of shutters etc complete all as specified and directeted.

S & F 35 mm thick factory made flash shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and directeted.

Taking down of chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frames) and set aside or removing from site etc complete all as specified and directeted.

Taking down of chowkats or frames exc 1.5 sqm but n. exc 4 sqm each (without taking off shutters from the frames) and set aside or removing from site etc complete all as specified and directeted.

Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each etc complete all as specified and directeted.

Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each and refixing in same opening after easing and adjusting etc complete all as specified and directeted.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing etc complete all as specified and directeted.

S&F Factory Made Solid PVC Moulded Door Shutter,with particle board core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing etc complete all as specified and directeted.

S & F 200 mm length of aluminium anodised barrel tower bolts of extruded section and fixed etc complete all as specified and directeted.

S & F 150 mm alluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed etc complete all as specified and directeted.

S & F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy etc complete all as specified and directeted.

S & F 100mm mild steel butt hinges, medium weight, cold rolled etc complete all as specified and directeted.

S & F 100mm Stainless steel butt hinges, medium weight, to PVC door etc complete all as specified and directeted.

S & F in repair 300 mm size mild steel rat tail rod pattern springs including roller and roller plate etc complete all as specified and directeted.

S & F 100 mm long Extruded brass handles, fabricated type polished etc complete all as specified and directeted.

S & F Powder coated fancy type Stainless Steel curtain rod 25mm dia with suitable SS brackets with suitable woodenround base and fency type end top matching to curtain rod of make as approved by GE etc complete all as specified and directeted. [ Additional supporting bracket shall be provided if length is exceeding 1.2m and rate quoted shall include for the same ]

S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodised etc complete all as specified and directeted.

S & F Mortice lock, brass 4 Lever vertical type, size 100 mm etc complete all as specified and directeted.

M&L wire netting of stainless steel wire 1.4mm dia and size of mesh 25mm fixed with tinned tacks of stainless steel wire staples etc complete all as specified and directeted.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directeted.

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples incuding necessary wooden beading etc complete all as specified and directeted.

S & F Stainless steel clip on auto closing panel concealed hinges thickness 15-22 mm for full overlay door 0 degree crank for cupboard door etc complete all as specified and directeted.

S & F stainless steel telescopic channel ball bearing drawer channel 500 MM with loading capacity: 45Kgs etc complete all as specified and directeted.

S & F CP Stainless Steel (SS 304) wire basket drawer of size 420 x 485 x100 mm (Cuttlery Box ) etc complete all as specified and directeted. Make: Hettich / Godrej/ Kutchina

S & F CP Stainless Steel (SS 304) wire basket drawer of size 420 x 485 x150 mm (Cup and Soucer rack ) etc complete all as specified and directeted. Make: Hettich / Godrej/ Kutchina

S & F CP Stainless Steel (SS 304) plain wire basket drawer of size 420 x 485 x 200 mm etc complete all as specified and directeted. Make: Hettich / Godrej/ Kutchina

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and directeted.

M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directeted.

M & L for Mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and bindingwith and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directeted.

M & L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directeted.

S & F mild steel trussed, purlins, fencing posts,crane gantries rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat section) Conforming to Fe-290 Gde E-165 including distance pieces, cleats , nut & bolt any size & length etc complete all as specified and directeted.

S & F Welded steel wire fabric supplied and fixed complete to wood or steel members weight n exc 4 Kg /Sqm etc complete all as specified and directeted.

S&F Powder coating (minimum thickness of powder coating 50 micron) aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directeted.

S&F Powder coating (minimum thickness of powder coating 50 micron) anodised aluminium sliding window and ventilator shutters, aluminium sections weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings etc complete all as specified and directeted. (Note : sheet Glass and SS wiremesh shall be measured & paid separately). .

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge.

S & F in repairs 18 mm thick veneered decorative plywood, grade 1( with BWR resin), with decorative face veneers on both faces fixed with screws to timber frame work for built in cupboards, shelves,almirahs etc all as specified and as directed by Engineer in Charge.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including a 15 mm thick screed bed of cement mortar (1:6) all as specified and directed.

M & L for Machine cut kota stone slab flooring 20-25mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick rendering in cement morter (1:4) all as specified and directed.

M&L Granite slab work 18 to 20mm thick in floors steps, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade over & including screed bed 15mm thick in CM 1:6 including cutting recess opening for the sink portion and embedding complete all as specified and directed by Engineer-in-Charge.

M & L for Granite (of any type) stone slab 18-20 mm thick [table rubbed and polished] machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone vertical surfaces with 10 mm thick rendering in cement morter (1:4) etc complete all as specified and directeted.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directeted.

M&L for Grinding with carborandum stones of 120 grit fitted in the machine in first phase and further second phase with carborandum of grit 220 to 350 and Oxalic acid powder shall then be dusted at 33 grams per square meter on the surface and the surface rubbed with machine fitted hessian bobs or rubbed hard with pad of woolen rags to kota stone slab, marble tiles, granite stone, terrazzo tiles etc. as in floor/ skirtng etc including cleaning the surfaces etc complete all as specified and directeted.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) for sub base to floor/Plinth protection including finishing the surface even and fair complete all as specified and directed.

M&L for 75 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) for hardstanding including finishing the surface even and fair complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:4:8 type D2 using 40mm graded aggregate as in sub base etc complete all as specified and directeted.

M&L for 40 mm thick PCC (1:2:4), type B1 (Using 20 mm graded stone aggregate) as in flooring, etc complete all as specified and directeted.

M&L for 25 mm thick PCC 1:2:4 type B 0(using 12.5 mm graded stone aggregate) including finishing the surface even and fair etc complete all as specified and directeted.

M&L for coloured non skid ceramic tiles 8 to 10 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, in floors etc. set and jointed in neat cement slurry over and including a 15 mm thick screed bed in cement mortar (1:6) and pointed with white or Coloured cement to match etc complete all as specified and directeted.

M&L for coloured non skid ceramic tiles 8 to 10 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, on vertical surfaces for skirting, set and jointed in neat cement slurry and pointed in whiteor coloured cement to match including 10 mm thick rendering in cement mortar (1:4) for backing of tiles etc complete all as specified and directeted.

M&L Coloured Glazed Ceramic tiles 450 x 300 x7-8/ 600 x 300 x 7-8mm thick on vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick backing coat in CM 1:4 etc complete all as specified and directeted.

M&L non skid ceramic tiles(Coloured) 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exceeding 0.11 sqm, in in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed 15mm thick in CM 1:6 etc complete all as specified and directeted.

M&L non skid ceramic tiles(Coloured) 7 to 8mm thick (square/rectangular) area of each tile exc 0.11sqm but n.exc 0.18 sqm, in in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed 15mm thick in CM 1:6 etc complete all as specified and directeted.

M&L of Machine pressed precast concrete glossy finish interlocking paverblock any shape and size confirming to IS 15658-2006of 60 mm thickness, M-35 Grade and pointed with grey cement mixed with pigment to match etc complete all as specified and directeted.

All as per item No 87 here in above but except paver block, using / re - laying old servicable inter locking paver block including taking down old paver block, levelling the surface as required at site etc complete all as specified and directeted.

M&L coloured chequered cement concrete tiles 30cmx30cmx25mm thick machine pressed set, jointed and pointed in neat cement slurry and pointed with mixture of grey cement and white cement in equal proportions with pigment in floors laid over and including 15mm thick screed bed in cement mortar 1:6 etc complete all as specified and directeted.

M&L for preparing of old chequered tiled surfaces / existing footpath by removing all the caked mud with wire brushes and cleaning surfaces with necessary acid and description not otherwise described and applying one coat of weather proof tile guard apex paint of equivalent of any colour etc complete all as specified and directeted.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directeted.

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement. Including mixing of water proofing compound wherever required as per manfactural instructions etc complete all as specified and directeted. ( WPC shall be measured and paid separately)

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:6, finished even and smooth with out using extra cement etc complete all as specified and directeted.

M&L for Rendering 10mm thick on brick work or concrete surface in cement mortar 1 : 6 and finished even and smooth without using extra cement etc complete all as specified and directeted.

M&L for Rendering 10 mm thick in CM 1:3 in ceiling on concrete surfaces finished even and smooth without using extra cement etc complete all as specified and directeted.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directeted.

M&L preparation of newly plastered surfaces of walls and applying through mechnical means two coats of oil bound distember (white or tined) over a coat of approved primer to obtain uniform surfaces including making good the surface etc complete all as specified and directeted.

M&L preparation of newly plastered surfaces of walls and applying through mechnical means two coat of exterior emulsion paint over one coat of primer on etc complete all as specified and directeted.

M&L for preparing of new plastered ceiling surfaces and applying three coats of white wash etc complete all as specified and directeted.

M&L for preparing new plastered surfaces and applying through mechanical means two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls etc complete all as specified and directeted.

M&L for preparing new plastered surfaces of walls and applying through mechanical means two coats of oil bound distemper over a coat of alkali resistant primer over and including applying 2 mm thickness wall careputty to prepair the surface even and smooth etc complete all as specified and directeted.

S & F 4.80mm thick sheet glass ordinary quality and glazing with EPDM rubber/ neoprene gasket etc exc 0.50 Sqm in each panes etc complete all as specified and directeted.

M&L Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer etc complete all as specified and directeted.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts as reqd etc complete all as specified and directeted.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheeting 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/J hooks and bolts as reqd etc complete all as specified and directeted.

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer etc complete all as specified and directeted.

S&F Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws etc complete all as specified and directeted.

S&F Tubes, ‘Medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 20 mm bore pipe line, etc complete all as specified and directeted.

S&F Tubes, ‘Medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm bore concealed pipe line, including cutting holes or grooves in brick wall/rcc and making good with cement mortar 1:3, etc complete all as specified and directeted.

S & F in repairs PP-R Ball valves 32 mm for outer dia of piper (brass insert) as per requirement of the sites crewed both ends for iron pipe or for unions etc complete all as specified and directeted.

Taking up or down 15mm dia steel tubing connections, including cleaning for re-fixing or removal to store etc complete all as specified and directeted.

Taking up or down 20 mm dia steel tubing connections, including cleaning for re-fixing or removal to store etc complete all as specified and directeted.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long etc complete all as specified and directeted.

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws etc complete all as specified and directeted.

Dismantling water tanks exc 500 ltrs and n exc 1000 ltrs etc complete all as specified and directeted.

S&F Rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylindrical vertical with closed top ) hoisted and fixed in position all as specified, including 20 mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe etc complete all as specified and directeted.

S&F 15mm long body bib taps long shank cast copper alloy with crutch or butterfly hadle secrwed for iron piper or for brass ferrule etc complete all as specified and directeted.

S&F in repairs 15mm long body bib taps long shank cast copper alloy with crutch or butterfly hadle secrwed for iron pipe or for brass ferrule etc complete all as specified and directeted.

S&F in Single lever wash basin mixer fancy type with capasten head chromium plated screwed down high pressure with without lettered 'Hot' or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed etc complete all as specified and directeted.

S&F premium quality 15mm bore central hole basin mixer with regular spout without popup waste system etc complete all as specified and directeted. make : Cera, Somany or equivalent.

S&F in Brass CP wall mixer fancy type for mixing hot & cold water chromium plated screwed down high pressure with for iron pipe with long screwed shanks and fly nuts screwed for iron pipe and fixed etc complete all as specified and directeted.

S & F Stop valve / Angle cock 15mm bore fancy type chromium plated screwed down high pressure, screwed both ends for iron pipe or for unions etc complete all as specified and directeted.

S & F in repairs stop valve / Angle cock 15mm bore fancy type chromium plated screwed down high pressure, screwed both ends for iron pipe or for unions etc complete all as specified and directeted.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore etc complete all as specified and directeted.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore etc complete all as specified and directeted.

S&F in standard PVC waste coupling pipe 32mm dia.,complete for sink etc complete all as specified and directeted.

S & F in repairs Waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms /40mm-60 gms) etc complete all as specified and directeted.

S & F towel rail 20mm dia chromium plated including 600mm long including brackets, screws and wooden/plastic cleats etc complete all as specified and directeted.

S&F 15mm bore PVC connection pipe 450mm long with PTMT nuts at both ends etc complete all as specified and directeted.

S & F in repairs PVC connection 15mm size 450mm long with PTMT nuts etc complete all as specified and directeted.

S &F chromium pated shower rose 125mm size with or without swivel joints, any size including fixing to 15 mm bore steel pipe or union etc complete all as specified and directeted.

S&F Health faucet with 1.5mm flexible chromium plated tube and hook fixed to angle valve etc complete all as specified and directeted.

S & F Vitreous china wash down water closet (Pedestal pattern, ETWC), white (including fixing bolts, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directeted.

S&F Table top wash hand basin Vitreous china, light colour / white of size 565mmx420mmx140mm including brass chromium plated waste coupling, chain, plug, porcelain rubber stopper, brackets, 32mm bore PVC waste pipe of appropriate length ilcluding making necessary connections etc complete all as specified and directeted. Make - Hindware/Cera/Neycer

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc complete all as specified and directeted.

S & F in repairs Stainless steel kitchen plate rack of size 750mm x 600mm x 250mm, made of 1mm thick stainless steel sheet etc complete all as specified and directeted. [Make: Prayag/ Nirali/ Jayna/ Neelkant]

S&F Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 standard PVC waste pipe 32mm dia., for WHB/Kitchen sink etc complete all as specified and directeted.

Taking down drain water pipes including all fittings any size and pattern with fittings etc complete all as specified and directeted.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm bore etc complete all as specified and directeted.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore etc complete all as specified and directeted.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore etc complete all as specified and directeted.

S&F PVC (SWR) bends any radius 110mm bore etc complete all as specified and directeted.

S&F PVC (SWR) bends any radius with access doors 110mm bore etc complete all as specified and directeted.

S&F PVC (SWR) bends any radius 75mm bore etc complete all as specified and directeted.

S&F PVC (SWR) bends any radius with access doors 75mm bore etc complete all as specified and directeted.

S&F PVC (SWR) junction single, (Single T) equal or unequal with access door 75 mm bore etc complete all as specified and directeted.

S&F PVC (SWR) junction single, (Single T) equal or unequal with access door 110 mm bore etc complete all as specified and directeted.

S&F PVC (SWR) vent cowl 110mm bore etc complete all as specified and directeted.

S&F PVC (SWR) vent cowl 75mm bore etc complete all as specified and directeted.

S&F PVC (SWR) floor trap 75mm dia outlet, plain/hole with grating including jointing with solvent cement etc complete all as specified and directeted.

S&F in repairs PVC (SWR) floor trap 75mm dia outlet, plain/hole with SS grating including jointing with solvent cement etc complete all as specified and directeted.

M&L for Cement Concrete 1:3:6 type C-2 as concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150 mm dia SWG pipe etc complete all as specified and directeted.

S&F 150mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointed as etc complete all as specified and directeted.

M&L salt glazed stone wave gully traps square or rounded mouthed type & fix 150 x 150 mm fixed in cement concrete etc complete all as specified and directeted.

M&L in repairs salt glazed stone wave gully traps square or rounded mouthed type & fix 150 x 150 mm fixed in cement concreteetc complete all as specified and directeted.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 100 mm bore pipes, etc complete all as specified and directeted.

M&L for Forming Contraction (Dummy) joints 75mm deep x 10mm wide, filled with sealing compound, grade 'A' etc complete all as specified and directeted.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.,disposal of unserviceable materials, debris and rubbish to a distance etc complete all as specified and directeted.

Demolition of cement concrete(unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) etc complete all as specified and directeted.

Demolition of reinforced cement concretein roofs, floors, beams, stair case, landing, chajjs and similar suspended work etc complete all as specified and directeted.

Dismantling structural steel work including doors, gates and similar works but excluding framed truss etc complete all as specified and directeted.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directeted.

Removing demolished material i.e. building materials, concrete, stone masonary, debris, tree roots, trunk, branches of any size etc. to a distance of 30Km or beyond, out of premises of metropolitan area, including loading, unloading by manually or by mechanical means (JCB) and to be transported through tractor-trolly or tipper and stacking at the destination as and when directed by Engineer-in-Charge during execution.

Point wiring with cable of PVC insulated FRLS copper multistranded conductor 1.5 sqmm 1100 volts grade in and including heavy grade PVC Casing Caping ISI marked with all accessories and fixing arrangements on wall/ceiling/floor etc. including fixing top cover /PVC junction boxes fixing on wall surface for housing switches/sockets/regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :-

One light controlled by one single pole 5 Amps switch

One Ceiling fan point controlled by one single pole 5 Amps switch

One Exhaust fan point controlled by one way switch

One 3 pin socket point 5 Amps on independent board.

One 3 pin socket point 5 Amps on Same board.

All as per item No 165.00 here-in-before but using copper conductor 2.5 sqmm PVC insulated unsheathed FRLS cable with copper conductor size 2.5 sqmmm PVC insulated unsheathed continuous earth continuity for 3 pin 15 amps switch socket outlet independently etc complete all as specified and directeted.

Supply and fixing LED lights fitting 4 feet, 1 x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling roseetc complete all as specified and directeted.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size etc complete all as specified and directeted.

Supply and fixing modular swich one way 6 Amps, 230 volts etc complete all as specified and directeted.

Supply and fixing modular swich one way 16 Amps one module, 230 volts etc complete all as specified and directeted.

Supply and fixing modular socket, 6 Amps 2/3 pin combined two module, 230 volts etc complete all as specified and directeted.

Supply and fixing modular socket, 6 A/16 Amps 2/3 pin combined two module, 230 volts etc complete all as specified and directeted.

Supply and fixing of modular type fan regulator upto 300 watts with 5 step speed control for fans any sweep 1200 mm/1400 mm etc complete all as specified and directeted.

Supply and fixing modular white cover suitable with frame 1/2 module etc complete all as specified and directeted.

Supply and fixing modular white cover suitable with frame 3 module etc complete all as specified and directeted.

Supply and fixing modular white cover suitable with frame 4 module etc complete all as specified and directeted.

Supply and fixing modular white cover suitable with frame 6 module etc complete all as specified and directeted.

Supply and fixing modular metal flush board 1/2 module etc complete all as specified and directeted.

Supply and fixing modular metal flush board 3 module etc complete all as specified and directeted.

Supply and fixing modular metal flush board 4 module etc complete all as specified and directeted.

Supply and fixing modular metal flush board 6 module etc complete all as specified and directeted.

Supply and fixing of DB, SPN 8 ways, single door type etc complete all as specified and directeted.

Supply and fixing PVC ceiling rose 65 x 50 mm surface type with 3 terminals etc complete all as specified and directeted.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) etc complete all as specified and directeted.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers etc complete all as specified and directeted.

Sub main wiring with Two single core PVC insulated FRLS cable with copper conductor multistranded 1100 volts grade 2.50 sqmm in and including non-metallic rigid PVC casing and capping and accessories and fixing arrangements fixed to surface on wall, floor or ceiling etc including 2.50 sqmm PVC insulated FRLS multistranded copper earth continuity conductor and connecting to main earth dolly etc complete all as specified and directeted. Note : One run of earth continuity conductor,one run of PVC casing capping and two run of copper conductor together taken as one length for measuring unit length.

Sub main wiring with Two single core PVC insulated FRLS cable with copper conductor multistranded 1100 volts grade 4.00 sqmm in and including non-metallic rigid PVC casing and capping and accessories and fixing arrangements fixed to surface on wall, floor or ceiling etc including 4.00 sqmm PVC insulated FRLS multistranded copper earth continuity conductor and connecting to main earth dolly etc complete all as specified and directeted. Note : One run of earth continuity conductor,one run of PVC casing capping and two run of copper conductor together taken as one length for measuring unit length.

Supply & fix of MCB SP 6 to 32 Amps 240 volts 10 KA rupturing capacity etc complete all as specified and directeted.

Supply & fix MCB SPN 32 to 40 Amps 240 volts 10 KA rupturing capacity etc complete all as specified and directeted.

SIGNATURE INFRASTRUCTURES(E DHARANI KUMAR REDDY)

NANDI CONSTRUCTIONS

OM ENTERPRISES

G K CONSTRUCTIONS