Chainlink mesh

RBR-FNDN-1- ( I-A-i ) In ordinary soils, up to 3.00 Mts depth below GL by Manual means: Earthwork excavation in all kinds of soil for structures as per drawings and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material, dressing of sides and bottom as per Technical Specification 305 MoRD / 304 MoRTH and as directed by the departmental officer including protecting the existing utility services wherever it is possible during the execution and taking all precautionary measures in the restricted areas for structures including divertion of traffic and backfilling in trenches with excavated suitable material and disposal of remaining earth upto a lead of 50 m, including all incidental and operational charges etc., complete for structures by manual means. For structures upto 3m depth below GL by Manual Means for Pedastals (0.45x0.45m)

Plain Cement concrete M7.5 (1:4:8) using 40 mm metal with concrete mixture. All work upto plinth level P.C.C for Footing

Providing Vibrated Cement Concrete ( 1:3:6 ) CC Mix usng 20 mm metal size HBG crushed stone graded metal and fine aggregate conforming to table 1000-2 of MoRT&H including cost, seigniorage conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500,1700, 2200 (4th Revision) and as directed by the Engineer-in-Charge

Supply & Fixing of 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete TBSP-G.I-12 for pedastall

Supply, Fabrication and Fixing of Structural steel using all kinds of material viz., flats, tubes or any other sections as per the design approved by the authority including cost of conveyance of all material, loading & unloading charges, Labour charges for fabricating steel works including cost of welding rods, power charges, including cost of fixing in position and any other incidental charges etc. complete for finished item of work as directed by the Engineer in Charge for hold fast for GI Nipple 25*3mm

Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979 - PVC Coated - 2½"x2½" (63 mm x 63 mm) - 8 Gauge

Drilling of 16 Nos through holes of 12mm dia to G.I pipe including cost & conveyance of all material & Labour charges ELEC-9.4.20

Supply and Fixing G.I.Nuts, Bolts and Washers each set including cost & conveyance of material & labour charges etc. complete ELEC-9.4.21 for hold fast

RBR-TSRA-7 : Painting Two Coats on Steel Surfaces : Painting primer coat with red oxide paint on steel surfaces after through cleaning of surface and then painting two coats of ready mixed Synthetic Enamel in all shades Grade - I / Polyurethane full gloss Enamel (IS - 13213) paints having VOC (Volatile Organic Compound) content less than 30 grams/ Lit. to give an even shade as per drawing and Technical Specification Clause 1701 MORD.