REPAIR / MAINT OF FILTRATION PLANT, CHLORINATION PLANT, SWIMMING POOL AND OTHER MISC ITEMS FOR WATER SUPPLY INSTALLATION AT ARTY CENTRE AND AOP AREA UNDER GE NASIK ROAD.

Amount

Supply only Suction sweeper Brush.

Supply only M seal in 200 Gms Packs.

Supply only MS Nuts & bolts with washers of various sizes 5/8’’x 3’’ long and 1/2’’x 3’’ long( Heavy Duty) .

Supply only PVC Flexible Bangadi Pipe Heavy duty of size 50mm (ISI Marked).

Supply only Hawksaw blades heavy duty

Supply only Dustin Cloth (cotton) of size 30x30 cm (as per sample)

Supply only bearing grease Heavy duty and high performance AP-3 in 10 kg container.

Supply only 3 mm thick rubber gasket paking.

All as per Item No. 08.00 above but 6 mm thick

Supply only 10 mm thick Graphite gland packing PTFE lowest coefficient to friction,high thermal conductivity self lubricate.

All as per Item No. 10.00 above but 12 mm thick

All as per Item No. 10.00 above but 14 mm thick

All as per Item No. 10.00 above but 16 mm thick

Supply only Holdtite plus ptfe tape (12 mm x10 m)

Supply only holdtite white liquid sealant for GI pipe in 500 gram container

Supply & fix 300 mm mechanical joint ISI marked for spigot end pipe.

All as per Item No. 16.00 above but 250 mm

All as per Item No. 16.00 above but 200 mm

All as per Item No. 16.00 above but 150 mm

All as per Item No. 16.00 above but 100 mm

All as per Item No. 16.00 above but 80 mm

Dismantling the Chlorine Plant Make Declibac including Single Phase Pump motor upto 1 Hp capacity. Transporting to a workshop for repair, repair of the plant including spare parts which required & reflexing same on its original site after repair all as directed by Engr-in-charge.

Supply only Pig Lead all as specified and direced.

Supply only Lead wool all as specified and direced.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out in soft loose soil all as specified and directed

Returining, filling in including spreading, levelling watering and well ramming in layer not exce 25 cm, all as specified and directed

Removing excavated soil to a distance not exce 50 mtr and deposited where directed at a level not exceding 1.5 mtr abvoe the starting point all as specified and directed.

Taking up or down 15 mm dia GI Tubing and connections including cleaning for refixing or removal to store or for sch of credit.

All as per Item No. 28.00 above but 20 mm dia

All as per Item No. 28.00 above but 25 mm dia

All as per Item No. 28.00 above but 40 mm dia

All as per Item No. 28.00 above but 50 mm dia

All as per Item No. 28.00 above but 80 mm dia

Refixing old GI Tubing and connection in New or old position (walls, Ceiling, Floors etc) of size 15 mm dia.

All as per Item No. 34.00 above but 20 mm dia

All as per Item No. 34.00 above but 25 mm dia

All as per Item No. 34.00 above but 40 mm dia

Laying only old serviceable removed GI Tubing from site and connection in New or old position (in trenches) of size 20 mm.

All as per Item No. 38.00 above but 25 mm

All as per Item No. 38.00 above but 40 mm

All as per Item No. 38.00 above but 50 mm

Supply and laying GI tubing medium grade with all fittings and fixed complete laid in trenches of size 15 mm.

All as per Item No. 42.00 above but 20 mm

All as per Item No. 42.00 above but 25 mm

All as per Item No. 42.00 above but 40 mm

All as per Item No. 42.00 above but 50 mm

Supply and laying GI tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of size 15 mm dia.

All as per Item No. 47.00 above but 20 mm dia

All as per Item No. 47.00 above but 25 mm dia

All as per Item No. 47.00 above but 40 mm dia

All as per Item No. 47.00 above but 80 mm dia

Removing 20 mm dia Unserviceable Gate valve/stop valve of water supply lines, closing the opening with plug or preparing for new as required necessary fitting complete and deposited to E/M store yard.

All as per Item No. 52.00 above but 25 mm dia

All as per Item No. 52.00 above but 40 mm dia

All as per Item No. 52.00 above but 50 mm dia

Supply and fix 20 mm dia Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe and fixed with required necessary GI fittings complete.

All as per Item No. 56.00 above but 25 mm dia

All as per Item No. 56.00 above but 40 mm dia

All as per Item No. 56.00 above but 50 mm dia

Supply and laying 300mm dia bore Ductile Iron Pipes K-9 (tyton joint) with spigot and socket ends centrifugally cast in any length with rubber tyton ring joint laid in trenches.

All as per Item No. 60.00 above but 250mm dia bore

All as per Item No. 60.00 above but 200mm dia bore

All as per Item No. 60.00 above but 150mm dia bore

All as per Item No. 60.00 above but 100mm dia bore

All as per Item No. 60.00 above but 80mm dia bore

Supply & Fixing 80 mm dia bore CI Sluice Valve of following size both end flanged and drilled, bonnet wedge stuffing box, gland thrust plate, hand wheel made out of grey CI, confirming to IS 14846/2000 and its fitting suitable for hydraulic pressure 15Kg/Sqmm, PN 1.6, Marked complete with all lead, lift and fixing including cost of nuts and bolts etc. all as specified and directed.

All as per Item No. 66.00 above but 100 mm dia bore

All as per Item No. 66.00 above but 150 mm dia bore

All as per Item No. 66.00 above but 200 mm dia bore

All as per Item No. 66.00 above but 250 mm dia bore

All as per Item No. 66.00 above but 300 mm dia bore

Supply & fixing Brass Float valve 15/20 mm for pipe fitting with synthetic rubber washer suppied with brass rod, full flow design (ISI marked)

Supply & fixing MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 kA suitable for isolation all as specified and directed

Supply & fixing MCCB of 100A, 4 pole, thermal adjustable 0.8 to 1In, With Breaking capacity 36 kA suitable for isolation all as specified and directed.

Supply & Fix MCCB 4 Pole, 415 V, Adjustable type, 400 Amps with breaking capacity 36 kA suitable for isolation all as specified and directed

All as per Item No. 75.00 above but 250 Amps

All as per Item No. 75.00 above but 160 Amps

Supply & fixing MCCB of 125A, 4 pole, thermal adjustable 0.8 to 1In, With Breaking capacity 36 kA suitable for isolation all as specified and directed.

Supply & fixing MCCB of 125A, 4 pole, thermal adjustable 0.8 to 1In, With Breaking capacity 25 kA suitable for isolation all as specified and directed.

Supply & fixing MCCB of 125A, 4 Pole, adjustable type, with breaking capacity 16 kA suitable for isolation all as specified and directed.

Supply & fixing MCCB of 100A, 4 Pole, adjustable type, with breaking capacity 16 kA suitable for isolation all as specified and directed.

Supply & fixing Energy efficient LED Street/Roadway light with smart sensor luminaire, high PF, 45W, energy saving and enviromental friendly long life versatile pressure die cast aluminium housing, clear toughned glass, IP 66 protection, 240V, intelligent smart sensor based auto dimmable with dimming option of 100% to 30% of the rated wattage on sensing of movement/ occupancy, within 8 meter radies, more than 110 lumens/watt complete using 2.5 Sqmm, PVC insulated (unsheathed) three core cable, 1100V grade with aluminium conductor from junction box to light fitting all as specified and directed.

All as per Item No. 82.00 above but 60 W.

All as per Item No. 82.00 above but 90 W.

supply and fixing of Energy efficient LED Flood light Luminaire, high PF, 80W, energy saving enviromental friendly long life versatile pressure die cast housing IP 66 protection,240V,completeusing 4 Sqmm, PVC insulated (Unsheathed) Two core armoured cable, 1100V grade with aluminium conductor (Upto 1.0 RM), complete including testing & commissioning.

All as per Item No. 85.00 above but 200 W.

Supply & Fix LED aviation light fitting with comprising of aluminium housing with polycarboante enclosure, IP 66 protection complete all as specified and directed.

Supply & fix of LED 10W integral decorative bollard mushroom and shaped with polymer diffuser and B22 bulb holder and 10W LED bulb with IP 65 protection complete with PCC Work 1:2:4 of adequate size for installed of bollard fitting complete all as specified and diralected by Engr-in-Charge.

Supply & Fixing electronic driver upto 36W for 2x2 Fitting suitable for surface/recess mounted LED fitting of any make and type, all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavyduty) with aluminium conductor, 11000 volts Earthed, grade cross sectional area 95 sq. mm

Supply & Fixing Sheet metal enclosure (factory made), TPN Vertical Distribution Boards (MCCB incomer) IP43 protection Double Door : Plain 4 Way with 200 Amps rated busbar all as specified and directed.

Supply and fixing MCB SP, 6-32 Amp rating 10KA, AC 240 V complete all as specified

Supply and fixing MCB SPN, 32 Amp rating 10KA, AC 240 V complete all as specified

Supply & fix MCCB 3 Pole 415 V fixed type, 36 Amp with breaking capacity 16 KA, suitable for isolation all as specified and directed

Supply & fix High density polyethylene (HDPE) pipe of pressure rating 6Kg per sqcm for cable of 90mm dia

Supply & fixing in replacement of angle iron frame any size and plain MS sheet any thickness and size for chamber cover at site requirement complete including removing of old chamber cover, fixing of new cover, welding works, painting work, redoxide primer, PCC work in this item rate all asspecified and directed by Engr-in-charge.

Demolition of Brick work or stone/boulder masonry, built in CM including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles.

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc in patches.

M&L for works with fly ash bricks, straight or curved or plain exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.

M&L for Cement plaster for mortar 15mm thick for laying floor finishes cement plaster 1:6 complete all as specified and directed by Engr-in-charge.

Demolition of PCC of any description above / below ground level exceeding 15cm complete all as specified and directed by Engr-in-Charge

M&L for PCC 1:4:8 type D2 using 40mm graded aggregate for pole / struts foundation etc all as specified and dierected

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate for coping including necessary form work and fair finishing of exposed surface of concrete all as specified and dierected

NOTE :- AMOUNT OF SCHEDULE OF CREDIT RS. 33,300.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

N K ASSOCIATES

Bidder Name

N K ASSOCIATES

MAHIMA CONSTRUCTION