Balance works of main entrance gate of Jambu Zoo including side flanks stair cases electric work whitewashing stabilization of wall stone by fixing fasteners etc ornamental railing along the lake boundary facing the main road railing of orien

Amount

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class deodar wood

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class deodar wood

Providing and fixing Float glass panes 5 mm thick glass pane (weighing not less than 12.50 kg/sqm)

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :150x10 mm

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :100x10 mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.10.25.1 In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.(Ornamental Gate)

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil :

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) including all leads lift carriage complete job

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including all leads lift carriage complete job

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all leads lift carriage complete job

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Centring and shuttermg including strutting, propping etc. and removal of form for· Foundations: footings, bases of columns etc. for mass concrete.

Centring and shuttermg including strutting, propping etc. and removal of form for Columns, pillars, piers, abutments, posts and struts.

Centring and shuttermg including strutting, propping etc. and removal of form forLintels, beams, plinth beams, girders, bressumers and centilevers.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick

Applying priming coats with primer of approved brand and manufacture,having low VOC (Volatile Organic Compound) content With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) including all leads lift carriage complete job

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) including all leads lift carriage complete job

15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 fine sand) including all leads lift carriage complete job

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete including all leads lift carriage complete job

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 m height,backing filled with a grout of average 12 mm thick cement mortar 1:3 ( 1cement: 3 coarse sand) including pointing in white cement mortar 1:2 ( 1 White cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete : (To be secured to the backing by means of cramps which shall be paid for separately):Red/White Sand Stone - Exposed face fine dressed with rough backing.30mm thick including all leads lift carriage complete job

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) Powder coated aluminum (minimum thickness of powder coated 50 microns)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing and fixing MS Ornamentasl Railing/Grill

Providing and fixing Stainless stell Railing grade 304 in stairs complete job with plate and pillar

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.10.25.1 In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. Mm FRLS PVC insulated copper conductor single core cable for loop earthing as required

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) way (4 + 12), Double doorquired

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supply anf fixing of SPN in existing MCBDB complete with connections testing and commissioning etc. as required 32 AMP SPN

Supply anf fixing of SPN in existing MCBDB complete with connections testing and commissioning etc. as required 40 AMP SPN

Supply anf fixing of SPN in existing MCBDB complete with connections testing and commissioning etc. as required 63 AMP SPN

Supply,Installation testing and commisioning of IP2000 Al Batten 20-22W +- 1Wt LED surface mounted 4 ft system lumen efficency of 100/m/w PF 20.9 THD<20%CCT 6500k CR180.the LED should have life of 50000 burning Houv20/L70.The input voltage should have 150v to 270v.The fixture should have inbuilt protection of 2kv certification -LM79 and LM 80.The test report should be from Govt approved Lab/inhouse NABL Lab.

Supply,Installation testing and commisioning of cubical type outdoor LT Panel Board suitable for 415 v-3 phase 4 wire 50Hz AC supply system including incoming,outgoing,bus bars etc as required as per the following description(P-55) main LT Panel

Incomer - MCCB 125A FP 36KA with Adj Thermal and Adj Magnetic release with Extendable ROM Lev=L05 = 100%

OutGoing - Manual changeover 125 Amp FP 415v Ac-23 Duty

MCCB 100 AFP 36 KA with Adj,Thermal Adj. magnetic release with extendable ROH

M.C.C.B 63 A.F.P 36KA with Adj thermal & Adj magnetic release with Extendable ROH LCU=Lex=100% (size of wiring for C7 S-2.5 Sqm size of wiring for voltage sensing metring 4.00 Sqmm size of wiring of all push buttons indicator lamp 1.5 Sqmm types of wire PVC insulated 1100 v grade multistrand copper conductor flexible FR-LSH Hinged door. Earthing device mounted hinged door connected to cubicles body by means of 2.5 sqmm green copper flexible wire. The complete pannel shall be made out of 2.00mm CRCA sheet including frame/pourtions/doors etc gland plate complete.

Supply and fixing of focus light & LED floodlight made up of pressure dia cast alluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection system effeiciency=110/125 LPW 10Kv SPD inlcuded on existing platform in cages LFLN 120-CDL/60-M of crompton or equivalent make of philips, wipro, orient, complete.

Providing and fixing of steel cage structure as per requirement at site wis MS Angle of 25x25x4mm framed structure and MS mesh of size 25x25mm with proper locking arrangement complete size (1'-6"x1'-6"x1'-6") and four legs of 1'-3" grouted in cement concrete block.

Supply and fixing surface LED lights of crompton/wipro/anchor/osram/havells or equivalent make (18 watt)

Providing and fixing 8'x8'x4" M.S pole connection box including MCB of 10 Amp with of and proper clamping system with locking arrangement includes welding, making cable connection and floodlight connection with 2.5 sqm CV wire.

Earthing with copper earth plate 600x600x3mm thick including copper nut and bolt and providing masanory enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc with charcoal/coke and salt as required.

Supply and laying 25mmx 5mm copper strip of 0.5 meter below ground as strip earth electrode including connection/terminating with nut, bolt, spring, washer etc as required complete job in 40mm dia G.I pipe as required

Supply and laying of one number P.V.C insulated and PVC sheathed/XLPE power cable of 1.1kv armour of alluminium cable encased in 2.5' D ribbon flexible PVC house pipe act as a conduct for cable of Havells, KCE, Anchor, Finolex, Polycab or equivalate make in dug out trenches. they job includes digging out trenches 40cm down and laying cable inluding refilling of trench and joining complete. 3.5 c x 95 sqm

Supply and laying of one number P.V.C insulated and PVC sheathed/XLPE power cable of 1.1kv armour of alluminium cable encased in 2.5' D ribbon flexible PVC house pipe act as a conduct for cable of Havells, KCE, Anchor, Finolex, Polycab or equivalate make in dug out trenches. they job includes digging out trenches 40cm down and laying cable inluding refilling of trench and joining complete. 4.0 c x 16 sqm

Supply and laying of one number P.V.C insulated and PVC sheathed/XLPE power cable of 1.1kv armour of alluminium cable encased in 2.5' D ribbon flexible PVC house pipe act as a conduct for cable of Havells, KCE, Anchor, Finolex, Polycab or equivalate make in dug out trenches. they job includes digging out trenches 40cm down and laying cable inluding refilling of trench and joining complete. 2.0 c x 10 sqm

Providing and fixing of fastner HRDCR2 10x140mm stainless steel A2 grade countevsunk anchor with polymide sleev for fixing upto 40mm thick to wall minimum embedment depth in base ,aterial (Brick/concrete)should be 70mm including the cost of shuttering and scajfolding required and fitting the gaps of the drilled holes,if any with filler as specified by the engineer incharge the cost shall also include the refixing of stone with concrete mortar 1:2 in case they come out during the process of mechanical drilling (Brass)

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 m height,backing filled with a grout of average 12 mm thick cement mortar 1:3 ( 1cement: 3 coarse sand) including pointing in white cement mortar 1:2 ( 1 White cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete : (To be secured to the backing by means of cramps which shall be paid for separately):Red/White Sand Stone - Exposed face fine dressed with rough backing.30mm thick

Mohd Arshad Beigh

joydeep wali