REPAIR TO INTERNAL WATER SUPPLY, SANITARY FITTINGS AND REPAIR/REPLACEMENT OF EXISTING ROOF TREATMENT AND CONNECTED EXTERNAL REPAIR WORKS IN CERTAIN OTM ACCN AT ZONE-I AREA AT JAIPUR MIL STN

Amount

Taking up or down steel tubing and connections of 15mm bore, fixed on walls, ceiling, floors etc.

Taking up or down steel tubing and connections of 20mm bore, fixed on walls, ceiling, floors etc.

Taking up or down steel tubing and connections of 25mm bore, fixed on walls, ceiling, floors etc.

Fixing only old steel tubing and connections of 15mm bore in new or old positing, in walls, ceiling, floors, trenches including fittings if any required. Note - Old pipe retrieved shall be re-issued.

Fixing only old steel tubing and connections of 20mm bore in new or old positing, in walls, ceiling, floors, trenches including fittings if any required. Note - Old pipe retrieved shall be re-issued.

M&L GI tubing medium grade 15mm bore with & including all fittings fixed on wall, ceiling complete all as specified & as directed.

M&L GI tubing medium grade 20mm bore with & including all fittings fixed on wall, ceiling complete all as specified & as directed.

M&L GI tubing medium grade 25mm bore with & including all fittings fixed on wall, ceiling complete all as specified & as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in stone, concrete block or slab wall.

S&F as in repair 15mm bore bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S & F in repairs 15mm bore bib tap fancy type chromium plated cost copper alloy with crutch or butter fly handle screwed down for iron pipe and fixed complete.

S&F as in repair fancy type pillar tap cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore.

S & F in repair stop valves cast copper alloy, fancy type chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions in 15 mm bore

S&F as in repair 15mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S&F as in repair 20mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S&F as in repairs stainless steel grating doom 100mm dia all as directed.

S & F in repair brass chromium plated shower rose 125mm size with swivel joint suitable for fixing with 15 mm bore pipe ncluding shower arm 15mm bore size with bend of 45 degree with flange

Dismantling old unserviceable RCC / PVC water tank capacity exc 250 and not exc 500 ltrs & removal from site complete all as directed

Dismantling old unserviceable RCC / PVC water tank capacity exc 500 and not exc 1000 ltrs & removal from site complete all as directed

S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.

S&F 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.

Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc tank capacity exc 250 and not exc 500 ltrs

Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc tank capacity exc 500 and not exc 1000 ltrs

S&F Ball PTMT valve, high pressure, with polythene float and flynut complete, screwed for iron pipe 20mm bore or brass ferrule and fixed complete all as specified and as directed.

S&F as in repair Ball PTMT valve, high pressure, with polythene float and flynut complete, screwed for iron pipe 20mm bore or brass ferrule and fixed complete all as specified and as directed.

S&F as in repair PVC valveless syphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified.

S&F as in repair vitreous china squatting pan (Orissa pattern) water closet (white) size 580mm x 440mm with integral foot rests (excluding flushing cistern and flush pipe) complete including connection to trap and flushing pipe antisyphonage pipe etc including provision of PCC (1:7:12) type F2 in filling complete all as specified.

S & F in repairs Vitreous China wash down water closet pan (Pedestal pattern), white including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device.

S&F as in repair vitreous china bowl type urinal flat back, size of 465mm x 355mm x 265mm (minimum) white including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with & including 60 mm long brass screws, pointing around urinal back in cement, with & including PTMT grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia complete all as specified.

S&F as in repair vitreous china wash hand basin white flat back of size 550mm x 400mm including a pair of cast iron brackets embedded in PCC 1:3:6 type C-1 blocks of size 10 x 7.5 x15 cm with & including 32 mm dia PVC waste pipe and 32mm chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed complete all as specified.

S&F as in repair cast iron floor trap of 75mm bore, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified & as directed.

S & F in repair PVC connections 450mm long suitable for 15mm bore GI pipe including PTMT nuts on both sides complete

Dismantling of cast iron drain pipes 100mm dia, jointed in cement mortar and taking out of trenches if required.

Dismantling of cast iron drain pipes 75mm dia, jointed in cement mortar and taking out of trenches if required.

S & F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors,100mm bore sand cast pipe

S & F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors, 75mm bore sand cast pipe

S & F as in repair Cast Iron soil cowl 100 mm dia

S & F as in repair Cast Iron bends (any radius) 100 mm dia with oval access doors

S & F as in repair Cast Iron bends (any radius) 75 mm dia with oval access doors

S & F as in repair 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete

S & F in repair Stack clamps out of 25mm by 3mm flat iron and 8mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof for 100 /75 mm bore pipe

S & F in repair 110mm bore PVC soil, waste and rainwater (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including necessary mild steel flat iron clamps at joints for fixing with wall complete incl taking down old unserviceable pipes

Dismentaling of floor hearth or wall tiling incl cement mortar bedding( but not backing) and rubbishof the premises

M & L coloured non skid joint free ceramic tiles 300x300x7 to 8mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as approved and directed

M & L glazed coloured ceramic tiles 300x200x7 mm thick, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4 complet all as approved and directed

M & L glazed coloured joint free ceramic tiles 400x400x7mm to 8 mm thick, as in floor set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM 1:6.

Vitrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set over 15mm thick screed in CM 1:6 jointed in neat cement slurry and pointed in white or coloured cement to match ,light shade.

Vitrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm,on vertical surfaces such as skirting, dados and risers to steps ,wall etc set over 10 mm thick cement plaster in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match colour of the tile.

M&L scrapping roof surface with wire brushes and washing with water etc including taking down old cement plaster, PCC of any thickness, description in any situation ,position and roof treatment any type for making good to receive new roof treatment any type. and removal of same from site to out side of Md land complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:4 on stone masonry or on other than fair face of brick surface, mixed with WPC @ 3% by weight of cement surface,finished even & smooth without using extra cement complete all as specified. Note :- Water Proofing compound shall be measured and paid separately as "Supply only"

M&L applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cum per Sqm.

Supply only integral waterproofing compound ISI marked.

M&L padding in PCC 1:2:4 type B-0 (using 12.5mm size graded stone aggregates) laid to average consolidated thickness of 50mm to provide a finished slope of 1:30 finished even and smoth without using extra cement.

M&L screed bed or bedding layer or mortar 15mm thick over roof finishes in CM 1:4 with WPC finished even and smooth w/o using extra cement.

M&L painted cement plastered surfaces with one coat of cold applied bituminous primer @ 0.40 ltr/Sqm conforming to IS-33894 and laying APP based polymeric membrane not less than 3mm thick, weighing not less than 3.5kg/sqm, reinforced with polyester non woven fabric (weighing not less than 150gms/sqm) and upper side of the membrane thermally insulated with white mineral gravel, uniformly embedded during manufacturing process shall only be used. It shall be laid by torch application. Side over laps shall be 75mm and the end lap shall be 100mm and all over laps and joints shall be sealed by torch application. For parapets, membrane shall be taken to a height of minimum 60cm and then inserted inside the parapet groove. This shall be finished by a membrane flashing.

M&L preparing new surfaces APP based polymeric membrane roof top exc 10cm width or girth and applying two coats of aluminium paint complete as directed.

Taking down cement plaster or cement lime plaster/ tiles, stone of any descrption on PCC/ stone surface/ brick surfaces of wall or ceiling including raking outs joint hacking for key scrubbing down with water etc

M & L rendering 10mm thick on concrete surfaces on ceiling in CM (1:3) finished even and smooth without using extra cement.

M & L rendering 15mm thick on stone masonary surfaces or surface other than fair faces of brick work on wall in CM (1:6) finished even and smooth without using extra cement.

M&L rendering 10 mm thick on fair faces of brick surfaces in CM(1:6) finished even and smooth with out using extra cement

M & L Preparing new plastered surfaces and applying three coats of white wash on ceiling

M & L Preparing new plastered or unplastered surfaces and applying two coats of cement base paint on walls

M & L Preparing new plastered surfaces and applying two coats of oil bound distemper over priming plastered surfaces with alkali resistant priming paint

M&L Preparing old decorated surface of walls including brooming down & cleaning the surfaces and applying one coat of cement base paint of any tint all as specified.

M&L preparing old decorated surface of walls including brooming down and cleaning the surfaces and applying one coat of distemper (Oil emulsion) of approved tint all as directed.

M&L Preparing old decorated surface and applying one coat of white wash on ceiling surface.

M&L preparing old painted wooden surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint of approved tint all as specified and directed.

M&L preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

Demolition of stone or brick masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles

M&L for brick work with sub-class 'B' bricks or fly ash brick, straight or curved on plan exc 6m mean radius built in In cement mortar 1:6

Demolition of stone slab and tiles of any description or thickness laid dry or laid dry and pointed as in floors, approans etc.

M & L 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregates in sub base complete

M & L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and no pigment laid over 25mm thick sand cushion layer complete

M & L chequred cement concrete tiles 25cmx25cm x25mm thick with grey cement and pigment in floors etc set jointed and pointed in neat cement slurry over and incl 15mm thick screed in CM (1:6) all as approved and directed

M & L PCC blocks or slabs 150 mm thick (1:2:4) mix type B-1 using 20 mm graded aggregated with plain or interlocking joints as directed complete in walls setting in CM (1:6).

M&L make good the edge of chajja/facia in proper shape i.e plum with rich cement mortar 1:2 and providing 10mm thick plaster in CM 1:4 including matching the surface with existing finished complete all as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pin/spring/ clip complete

S & F 3mm thick plain sheet glass ordinary quality and glazing with oil putty in sqaures not exc 0.5 sqm in each pane.

S&F plain sheet glass 5.5 mm thick ordinary quality fixed with and incl rubber gasket area not exc 0.5 sqm in each pane complete to aluminium door/window or partition wall.

M&L for running welding to mild steel hinges coming out from steel frame( rates to be included for filling material and work place is segregated)

S & F mild steel framed work as in door frame of angle or other section and fixed with angle cleats and connecting plates etc of Gde E-165 (Fe-290) Note:- Cost of welding butt hinges to the door frame deemed to included in quoted rate

M&L Two coats of synthetic enamel paint to steel surfaces over red oxide primer exc 10 CM in width or girth including preparation of steel surfaces.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m and above including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 nos in each door, hinges, anodised aluminium snap beading screws etc. as in repairs complete all as specified.

M&L for 09 mm thick prelaminated particle board interior grade, prelaminated both side with decorative choice lamination fixed with screw .

S & F brass mortice lock verticle type size 65mm, 4 levers with escutcheon plates and two keys fixed in aluminium frame.

M & L double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed

S&F Door closer aluminium anodized extruded section body hydraulically regulated designation No-3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg as in repairs.

S&F Aluminium beads with rubber gasket 20mm width as in repairs.

S & F alvanised mild steel wire cloth 0.63 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples as in repair to replace the old wire mesh.

S & F in repair brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges

S&F as in repair cromium plated brass toilet paper roll holder with flap complete as per Jaquar Cat Part No AKP-35753P

S&F as in repair cromium plated brass hand shower (health faucet) with 8mm dia 1.00m long flexible tube and wall hook as per Jaquar cat Part No ALD-573.

S&F Soap dish, Vitreous China white, approximate size 160x160x90mm

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

S&F Corner Glass shelf 300 mm make Gesign cat part No GS 300 fixed in repair

Two way Bib taps fancy type cromium plated long body cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule,long body,15 mm make cera Cat Part No FWC 9100 A fixed in repair

Supply & fix EWC seat cover colourd match to WC

S&F as in repair Chromium plated jet spray suitable for EWC, complete all as specified

S&F in repair15 mm bore CP Angle valve cast copper alloy screwed down high pressure with capastan head, screwed both ends for iron pipe or for unions. Make - Jaquar, Seiko, Hindware.

M&L Shelf of PTMT fixed with and including Chromium plated brass screws and wooden / platic cleats (minimum weight 300gms)

M&L rendering 15 mm thick on fair faces of brick surfaces in CM(1:6) finished even and smooth with out using extra cement

Schedule of Credit

M/S S R CONSTRUCTION

parmanand & company

M/S Mohan Lal Gupta

J.J.ENGINEERING

UNIVERSAL INFRAPROJECT PVT LTD

Shiv Construction Company

SWAMI CONSTRUCTION