CERTAIN REPAIR TO B/R ITEMS AT HQ 133 WE, CE 31 ZONE AND OTHER AOR OF AGE B/R III AT BB CANTT, SRINAGAR.

Amount

M&L for reinforced cement concrete, nominal mix (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in ornamental columns in any shape and designs as approved by user, pillars, piers, posts, struts and their foundation, incl demolition of RCC pillars/colns with bases or concrete of any description, complete all as specified and directed.

M&L for 50mm thick designed/ ornamental cement plaster, on fair faces of brick or concrete surfaces in CM (1:3) in layers of suitable thickness (each layer scratched with scratching tool) finished fair & even (including necessary formwork and everything required for same like providing nails @ 10 Nos, 40mm long nalis/ Sqm, chicken wiremesh etc) and carving grooves/ design as approved by user complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling of old roof sheets (any description, any thickness), complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling of old roof sheets (any description, any thickness), complete all as specified and directed.

Dismantling timber scantlings 40 sqcm and over in section, in any position, complete all as specified and directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., Fe 410 -W (Grade E-250) quality - A complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S&F Mild steel TMT bars 5 mm dia and over upto and including 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns (of any shape and ornamental designs), stanchions and their foundation for fair finished surfaces of concrete complete all as specified and directed.

M&L for Granite (of any type) 18-20mm thick machine cut, as in floors and skirting, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including 15 mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L for Khatamband pattern false ceiling design as approved by GE with ornamental wood work made out of 6 mm thick deodar wood, cutting holes for ceiling lights and having two coats of varnish over a coat of natural wood primer incl dismantling of old ceiling of any description and thickness. The Khatamband to be fixed over 12 mm thick BWR plywood over timber scantling frame work of size 600 mm x 600 mm with second class hardwood 100 mm x 75 mm as main joist and 50 mm x 50 mm secondary joist fixed with nails/screws and finally finishing with french polish (two or more coats), complete all as specified and directed.

S&F Hollow PVC Wall lining/panelling on walls/ceiling consisting of 5mm thick Plain colour PVC sheet incl all PVC sheet fillet of width 20mm 'L' & 'U' for wall paneling inclusive of fixing on to wall/ceiling incl dismantling of old wall panels/ceiling, complete all as specified and directed.

M&L for 10-12 mm thick 1st class soft wood Australian wooden wall paneling incl fillets & cornices, fasterners and all other accessories over 6 mm thick BWR plywood fixed over necessary timber scantling and frame work incl two coat of varnishing, french polishing and prepration complete all as specified and directed. Note:- Rates for dismantling old panelling/boarding of any description and disconnecting of electrical boards, DBs, switches or any other electrical appliances etc and installation after completion of work shall also be included in the quoted rate.

S&F 12 mm thick gypsum ceiling boards including anodised aluminium snap grid frame work of size 605x605mm and 6mm dia GI hangers with fixing accessories for false ceiling as per manufacturer's instruction and dismantling of old ceiling of any description / thickness complete all as specified and directed.

Taking down chowkats or frames not exc. 1.5 sqm each (area) with shutters (without taking off shutters from the frames), complete all as specified and directed.

Taking down chowkats or frames exc. 1.5 sqm but not exc 4 sqm each (area) with shutters (without taking off shutters from the frames), complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each (area), complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as spd.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors (incl ornamental and intricate design); ladders; framed balusters; walk ways; railings; framework of water tanks and similar work, including dismantling old iron complete all as specified and directed.

S&F factory made 35mm thick plain framed, panelled shutter (two panel) with lock rail (2nd class HW rail and style) and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F Second class hard wood for plain solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F 150mm size alumnium anodised handles cast type complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 200 mm long, complete all as specified and directed.

S&F 100 mm size butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for precast cement concrete type (1:3:6) hollow block masonry ( using 16mm graded crushed stone aggregate) exc. 10 cm in width and setting in cement mortar (1:6) including demolition of block masonry, complete all as specified and directed.

S&F wooden Jafri 35mm x 10mm laths (fixed straight or diagonally) in two way trellis work of second class softwood with 50mm spaces in the clear, including 75mm x 50 mm fillet (notched to take ends of laths) all round clean swan including dismantling old jafri (trellis work - two way), complete all as specified and directed.

M&L for rendering 15mm thick in cement plaster on fair faces of brick or concrete surface in CM (1:4) finished fair & even, complete all as specified and directed.

M&L for Pre Polished Green Marble work 18 to 20mm thick in steps, jambs, pillars, windowcills, cooking platforms, CB shelves and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of sotone including dismantling of old stone slabs, complete all as specified and directed.

M&L for Vitrified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tile laid over and including 15 mm thick Screed bed or bedding layer of mortar in CM (1:4) for laying floor finishes incl dismantling of floor tiles of any description, complete all as specified and directed.

M&L for Vitrified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, in skirting / vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tile laid over and including 10 mm thick backing coat in CM (1:3) including dismantling of wall tiles of any description, complete all as specified and directed.

S&F in repair/ replacement Aluminium Composite Panel (ACP) Sheet 3 mm thick including suitable GI /Steel framework and everything required, fixed to gates, pillars etc as per manufacturer instructions, complete all as specified and directed.

S&F in repair/ replacement Stainless steel letters of any height or description/thickness as per user requirement fixed to walls, tiles/sheets or any other surfaces using suitable fixing arrangement complete all as specified and directed.

S&F in repair/ replacement Vitreous China One Piece EWC, white including all accessories, seat cover, bolts, flushing cistern, complete all as specified and directed.

S&F in repair/ replacement Vitreous China Urinal, Half stall type, white incl waste pipe, coupling, CP Urinal spreader and all accessories, complete all as specified and directed.

S&F in repair 15 mm bore angle valve/stop valves, CP Fancy type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repair/ replacement 12 mm thick Toughned glass as in hinged doors, partitions automatic doors, logo plates and similar work including cutting to shape, drilling holes required, complete all as specified and directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed , complete all as specified and directed.

M&L for providing etching (design / opaque) to toughened glass of any description, complete all as specified and directed.

M&L for Brick work with sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM (1:6) including demolition of brickwork built in cement mortar in any position, complete all as specified and directed.

S&F in repair, PVC low level cistern 10 lir capacity, valveless, syphonic action type with float, handle incl 32mm dia flush pipe of polyethylene of low or high density or PVC & bracket etc, complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in repair 15 mm bore Pillar taps, CP Fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repair 15 mm bore Bib taps, CP Fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repair 15mm bore WHB mixer, for mixing hot or cold water, brass, CP, fancy type, with capstan head handles, screwed down high pressure, screwed for iron pipe or for brass ferrule of 15mm dia, complete all as specified and directed.

S&F aluminium powder coated (thickness of powder coating not less than 50 micron) partitions made of the following specifications:- (Net external size of partition shall be measured and paid. Following items shall be included in quoted unit rate.) (a) Aluminium frame powder coated (Vertical and horizontal members) @ not exceeding 1.20 m distance both ways of hollow section 100 mm x 44 mm x 1.60 mm thick. (b) Lower portion of partition shall be fixed with 12 mm thick particle board fixed with suitable aluminium beading clips and EPDM beading (rubber) and all other accessories. (c) Upper portion of partition shall be fixed with 5 mm thick glass (as per user requirement) fixed with suitable aluminium beading clips and EPDM beading (rubber) and all other accessories (d) Dismantling of old unservicable partitions of any description and any thickness (AC sheets, wooden particle boards with wooden frame etc). (e) Repair to the jamb, cills and all sides around the ventilator shall be included in the quoted unit rate. The repaired surfaces to be finishes to match with the existing surfaces like tiles, plastering etc.

S&F in repair/ replacement aluminium powder coated (thickness of powder coating not less than 50 micron) sliding window made of the following specifications:- (Net external size of window shall be measured and paid. Following items shall be included in quoted unit rate.) (a) Aluminium frame powder coated all around of hollow section 100 mm x 44 mm x 1.60 mm thick. (b) Provn of 03 trade runners of size 92 x 31.75 x 1.10 mm. (c) Provn of glazed sliding shutters (02 Nos) of section 44 mm x 18 mm x 1.25 mm provided with 3.50 mm thick glass with suitable EPDM beading and locking clips arrangement. (d) Provn of 01 No gauzed shutter of Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm with suitable EPDM beading and locking clips arrangement. Section of shutter as per para (c) above of this item. (e) Aluminium powder coated grill of weight not less than 2.60 Kg/Sqm on external side with suitable frame/aluminium runner to be fixed on the window frame. (f) Repair to the jamb, cills and all sides around the ventilator shall be included in the quoted unit rate. The repaired surfaces to be finishes to match with the existing surfaces like tiles, plastering etc.

S&F in repair/ replacement aluminium powder coated (thickness of powder coating not less than 50 micron) ventilators made of the following specifications:- (Net external size of ventilator shall be measured and paid. Following items shall be included in quoted unit rate.) (a) Aluminium frame powder coated stiles, bottom, top and middle rail of hollow section 50 mm x 25 mm x 1.80 mm thick. (b) Lower portion of ventilator shall be fixed with 3 mm thick pin headed glass fixed with suitable aluminium beading clips and EPDM beading (rubber). (c) Upper portion shall be fixed with aluminium powder coated louver guides fixed with 3 mm thick pinheaded glass with suitable EPDM beading incl suitable handle and clips. (d) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with suitable frame in upper panel. (e) Repair to the jamb, cills and all sides around the ventilator shall be included in the quoted unit rate. The repaired surfaces to be finishes to match with the existing surfaces like tiles, plastering etc.

M&L for aluminium anodised powder coated (thickness of powder coating not less than 50 micron) sections of approved and required size for door / windows frames or chowkats / partitions / shutters, sliding channels / tracks etc including jointing cleats, MS nut & bolts or steel screws, dash fasteners, rowel plug for fixing of screws in wall or floor etc, including dismantling old frames complete all as specified and as directed.

S&F in repair/ replacement Anodised aluminium powder coating of any colour (thickness or powder coating not less than 50 micron) door shutters, aluminium section weighing not less than 0.55 kg/ m including necessary joining cleats, glazing clips, EPDM beading, handles 2 Nos & 03 x hinges 100 mm in each door, anodised aluminum snap beading, screws etc and 12 mm thick particle board in lower panel ad 5 mm thick glass in upper panel, complete all as specified and as directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M&L for 75 mm thick Cement concrete (1:4:8) type D2, (using 20mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6), type C-2, (using 40mm graded crushed stone aggregate) as in plinth protection, finished concrete surfaces even and smooth without using extra cement and filling joints with bitumastic filling in proportion bitumen and coarse sand mixture. 1:2 complete all as specified and directed.

M&L for treatment to sunken portions of toilets by demolition of existing treatment of any description and thickness (incl tiles, concrete, sanitary fittings etc), removal rubbish outside MoD land, 10 mm thick plaster in CM 1:4 with water proofing liquid conplast 421 of Make - Fosroc or equivalent as specified and applying one coat of each Nittoproof 100 and Nittoproof 120 of Ms Fosroc or equivalent as specified on plastered surface and rendering again 10 mm plaster in cement mortar 1:4 mixed with conplast 421 of Ms Fosroc or equivalent in sunken portion and CI pipe joints shall be filled/jointed with mixture of cement, fine sand and Nittoproof 130 of Ms Fosroc or equivalent as specified and provide hole in the wall to fix 20 mm dia GI spout 600 mm long and PCC 1:5:10 using brick bats filling in sunken portion and finished top layer with 75 mm thick PCC in 1:2:4 type B1 (using 20mm graded crushed stone aggregates) to receive tiles all as specified. Note: Plan area (Length x Breadth) of floor shall only be measured and paid.

M&L for Glazed ceramic tiles in vertical surface 300x 450x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including cement mortar rendering (if reqd in any portion) & dismantling floor, hearth or wall tiling (but not backing), removing rubbish off the premises, complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tile laid over and including 15 mm thick screed bed in CM (1:4) & dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises, complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors incl all Tees, elbows, sockets etc fittings, complete all as specified and directed.

M&L for wooden prelaminated flooring of size 1200 x 200 x 8-10 mm thick including cornices & fillets fixed with adhesive, cushion & any other accessory reqd as per manufacturer's instructions and dismantling of old wooden flooring alongwith its fittings, complete all as specified and directed.

Notes :- An amount of Rs. 1,28,285.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.

M/S Paradise Constructions (BID ID -3301246)

M/S SK ATLANTIC ENTERPRISES (BID ID -3300855)

Alishan Builders (BID ID -3306536)

M/S Vivek Gupta and Co (BID ID -3300294)

M/S AIJAZ ENTERPRISES (BID ID -3300800)

M/S SHIMAR STAR GLACIER (BID ID -3305854)

M/S Tajamul Ah Buchh (BID ID -3301238)