Providing fencing to the Open to sky, bathing place areas and special repair works for Sub-Jail at Krishnagiri in Krishnagiri District.

Amount

DI0012: Clean removal of the old cement plastering from the existing walls without damaging the existing structure and surroundings

DI0029: Dismantling, the one course of pressed tiles roof finish in cement mortar carefully without affecting the existing structure

DI0031: Dismantling the damaged broken door/window including the removal of frames, hinges, fastenings and shutters form the existing structure.

DI0037: Dismantling the existing damaged Reinforced Cement Concrete without affecting the adjacent structures, including the hire charges of tools

DI0023: Dismantling the damaged brick/stone masonry works under 3m high in cement mortar walls without affecting the adjacent structures including the cost of required tools.

DI0051: Dismantling the damaged floor finish and dadooing walls in cement mortar with Mosaic tiles/Glazed tiles/Cuddapah slabs without affecting the adjacent structures including the cost of required tools and plants and clearing the debris 2km away from the site

DI0017: Dismantling the existing damaged Plain Cement Concrete without affecting the adjacent structures, including the hire charges of tools and plants, and scaffolding

E0001: Earth work excavation for foundation in all soils and sub-soils to the required depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting, and bailing out water (including Refilling) a) 0 to 2m depth

CSMP0002: Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement using 40 mm gauge hard broken stone jelly

BMP0007: Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) for super structure in the following floors b) In Stilt / Ground Floor

GR0001: Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure or steel M.S grill gate etc.,

FLMP0002: Plastering the top of flooring in CM 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

PLMP0001: Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

PLMP0002: Plastering with CM 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

PLMP0003: Special ceiling plastering in cement mortar 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

WS0276: Supplying, laying, fixing and jointing the following uPVC pipes as per ASTM D-1785 c) 20mm dia ASTM pipe (fully consealed at walls)

SA0002: Supplying and fixing of porcelain wash hand basin (white without pedastal) superior variety of size 550x400mm with all accessories

SAMP0004: Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark In Ground floor.

WS0033: Supplying and fixing of 15mm dia CP Long body Tap of best quality including cost of fittings with required specials, bends, labour for fixing

WS0036: Supplying and fixing of 15mm dia CP short body Tap of best quality including cost of fittings with required specials, bends, labour for fixing etc

WS0006: Supplying, delivery, laying and fixing of ASTM PVC Pipes and specials including cost of pipe and specials with ISI Mark of best quality confirming to IS Specification a) 32mm dia ASTM PVC pipe

b) 25mm dia ASTM PVC pipe

SA0033: Supplying and fixing the following dia PVC (SWR) pipe and relevant specials including packing the joints with rubber lubricant a) 110mm dia PVC SWR pipe including all required PVC specials

b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

WS0002: Supplying and fixing of 110mm dia PVC SWR pipe for Rain water down fall pipe with necessary gratings, shoes, bends, off sets, clamps, teak woods plugs, and of approved quality and including fixing C.I.

SA0048: Supplying and laying of following UPVC Non Pressure pipe (SN8) SDR 34 with ISI mark in Below Ground level charges for earth work a) 110mm dia UPVC Non Pressure pipe

WS0021: Supplying and laying of following dia GI pipe "B" Class of best approved quality including cost of all materials with ISI mark, specials and labour charges for cutting, welding, joints and fixing in position(Above GL) a. 50mm dia GI "B" Class pipe

WS0018: Supplying and laying of GI specials WS0018.V.a: 50mm dia GI Elbow

WS0018.VII.a: 50mm dia GI Hex Nipple

WS0018.VI.a: 50mm dia GI Union

WS0018.III.b: 50mm GI bend

WS0018.I.b: 50mm dia coupling

WS0018.X.a: 50mm GM non return valve

WS0018.IX.d: 50mm dia Gun Metal Gate valve

WS0023: Supplying, laying, fixing and jointing the following UPVC pipes as per IS 4985 (Below G.L) c) 50mm dia UPVC pipe

WS0004: Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylindrical vertical type) for outdoor use having capacity of c) 1000 litres

EL0041: Supplying and fixing of 15 amps 3 pin plug type socket on a suitable MS box 16g thick concealed and covered with 3mm thick laminated hylem sheet

EL0174: Supplying and laying of 8 SWG GI wire on wall below ground levels with necessary ‘U’ Nails, earth work excavation and refilling

EL0214: Providing Earthing station using pipe electrode as per IS 3043 using 2.5m of 40mm and 1.0 m of 20mm B-class GI pipe including earth work excavation

EL0002: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990, 1.1 K.V. grade cable a). Light Point with Ceiling rose

b. Light Point without Ceiling rose

EL0010: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.

EL0026: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug @ Switch Board Itself.

EL0034: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.

EL0190: Run off main with 2 wires of 2.5 Sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark

EL0100.d: 120W LED Street Light Fitting with LED

EL0100.a: 25W LED Street Light Fitting with LED

EL0047: Supplying and fixing of 4 feet 18watts LED tube light with ISI mark including cost of materials and labour fixing.

EL0070: Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite pattern holder of best approved variety and as directed by the departmental officers. (The materials should be got approved from the Executive Engineer before use) a. 9 watts LED bulbs

b) 12 watts LED bulbs

EL0298: Supply and fixing of electro mechanically operated three phase earth leakage circuit breaker/residual current circuit breaker (ELCB/RCCB) combined with over load and short circuit protection having a rupturing capacity of 6 KA with 40 milli amps fixed setting sensitivity and rates for 25 A

EL0078: Supply and delivery of following Electric Ceiling fan with blades and double ball bearing, capacitor, type complete with 300 mm down rods canopies, capacitor, shackle blades with speed regulator Electric fan 1200mm sweep

EL0075: Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator

PA0018: Painting Primer coat using approved quality of white cement over the cement plastered/concrete wall surfaces, ceiling

PA0002: White washing Two coat using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding, thorough scrapping and washing with soap, soda water

PA0001: White washing Three coat using clean shell lime slaked including cost of lime, gum, blue, brushes

PA0047: Painting old walls two coats with ready mixed plastic emulsion paint of first class quality paint of approved colour and shade for outer wall and other similar works with priming coat through scrapping including cost of necessary brushes, labour charges, patty

PA0048: Painting the old walls with two coats of oil bound distemper of approved brand over cement plastered wall surfaces throughly scrapping including cost of paints, putty, brushes, watering, curing

PA0021: Painting the walls with two coats using approved quality of best Oil Bound Distemper over the one coat of putty work including cost of distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements & labour charges

PA0042: Painting New walls two coats with ready mixed plastic Exterier wall emulsion paint of first class quality paint of approved colour and shade for outer wall and other similar works with priming coat

PA0036.a: Painting the old Iron work and other similar works such as PVC / ASTM Pipes, Kerb Stone and grills

PA0025: Painting the old wood work with two coats of approved Ist class synthetic enamel paint including thorough scrapping the old paint using sand paper as required by the departmental officers including cost of material, labour for painting, supplying.

EL0200: Run off main with 4 wires of 4 Sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

J0007: Supplying and fixing of country wood planks upto 30cm wide 25mm thick in end supports to the mangalore roof and any other similar works including labour charges for fixing in position, complying with relevant standard specifications

J0005: Supply and delivery of country wood reepers b) (50x25mm) for purlins and any other similar works.

CSMP0003: Plain cement concrete 1:2:4 (One of cement two of crushed stone sand and four of Hard Broken Stone jelly) (including Mortar Plasticizer (Liquid) at 200ml per bag) using 20mm gauge hard broken stone jelly

PLMP0006: Combination mortor 1:1:6 (One of Cement and One of Lime and Six of Crushed Stone Sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0006: Supplying and fixing of colour Ceramic Tiles Anti skid without corrugated design for flooring and other similar works (Best approved quality, colour and shade shall be got approved from the Executive Engineer before using) over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0005: Supplying and fixing of Colour glazed tiles (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:2 (One of cement and two of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

PA0026: Painting - New "iron work"