Design Detailed EnggManufactureSupplyETC of 230/110KV AIS SS with ICTs, SWGs, CP,SAS, Control Room, Civil Works at Muppandal in TveliRegion on Total Turnkey under PkgVI of MNRE,KfW funding of GECII Project.

Amount

Schedule I

Schedule II

Schedule III

Applicable GST Amount (Total GST Amount) @18%

Description of Work / Item(s)

Amount

Design of control room building including design calculation for analysis of entire control room building, foundation, electrification and Electrical layout drawing, water line, sewer line, storm water drainage etc. complete.

Clearing scrub jungle and disposing away from site including cost of labour, lead, lift, etc., complete.

Clearing Juliflora Jungle with Uprooting and disposing away from site including cost of labour, lead, lift, etc., complete.

Surveying and marking the site including cost of lime powder, marking thread, wooden pegs, brick piller for corners including cost of materials lead, lift, labour etc. complete.

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales,murram, gravel, stoney earth and earth mixed with small size boulders SS.20.B

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Soft disintegrated rock, laterite, soft rock or kankar, not requiring blasting.

Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in medium rock and dense medium rock not requiring blasting

Supply and filling with M-sand for foundation & basement including cost of materials, watering, consolidation etc. with leads, lifts etc. complete

Providing anti termite treatment in 4 stages I) immediate after earth work excavation and before laying foundation concrete II) after refiling for sides of foundation III) Before laying of flooring concrete IV) outside of basement upto 1.0m alround the building using termite 250ml for 5 lit of water etc. complete.

PCC M10 using 12mm to 20mm metal without formwork including cost of materials, Labour charges, curing charges, lead, lift etc. complete

PCC M15 using 12mm to 20mm metal without formwork including cost of materials, Labour charges, curing charges, lead, lift etc. complete

RCC M25 mix using 12mm to 20mm HBS metal (machine crushed) without formwork including cost, labour, materials, lead, lift, curing, etc., complete. But excluding cost of steel reinforcement (By using mixer machine and vibrator). RAFT

RCC M30 mix using 12mm to 20mm HBS metal (machine crushed) with formwork including cost labour materials lead lift curing etc complete. But excluding cost of steel reinforcement (By using mixer machine and vibrator). COLUMN

Column Upto basement

Column in Ground floor

Column in First floor

Column in Second floor

RCC M30 mix using 12mm to 20mm HBS metal (machine crushed) with formwork including cost labour materials lead lift curing etc complete but excluding cost of steel reinforcement (By using mixer machine and vibrator) GRADE BEAM

RCC M30 mix using 12mm to 20mm HBS metal (machine crushed) with formwork including cost labour materials lead lift curing etc complete but excluding cost of steel reinforcement (By using mixer machine and vibrator) PLINTH BEAM

RCC M30 mix using 12mm to 20mm HBS metal (machine crushed) with formwork including cost labour materials lead lift curing etc complete but excluding cost of steel reinforcement (By using mixer machine and vibrator). LINTEL

Lintel in Ground Floor

Lintel in First floor

Lintel in Second floor

RCC M30 mix using 12mm to 20mm HBS metal (machine crushed) with formwork including cost labour materials lead lift curing etc complete but excluding cost of steel reinforcement (By using mixer machine and vibrator). SUNSHADE & LOFT

Sunshade & Loft in Ground Floor

Sunshade & Loft in First floor

Sunshade & Loft in Second floor

RCC M30 mix using 12mm to 20mm HBS metal (machine crushed) with formwork including cost labour materials lead lift curing etc complete but excluding cost of steel reinforcement (By using mixer machine and vibrator). ROOF SLAB

Ground floor 125mm thick

Ground floor 150mm thick

First floor 125mm thick

First floor 150mm thick

Second floor 125mm thick

RCC M30 mix using 12mm to 20mm HBS metal (machine crushed) with formwork including cost labour materials lead lift curing etc complete but excluding cost of steel reinforcement (By using mixer machine and vibrator). ROOF BEAM

Roof Beam in Ground floor

Roof Beam in First floor

Roof Beam in Second floor

RCC M30 mix using 12mm to 20mm HBS metal (machine crushed) with formwork including cost labour materials lead lift curing etc complete but excluding cost of steel reinforcement (By using mixer machine and vibrator). PRE CAST SLAB

RR masonry in CM 1:6 mix using hard blue granite stone for foundation and basement including cost of labour materials lead lift curing etc complete.

Pointing with CM 1:3 mix for RR masonry including cost of materials labour lead lift etc complete

Brickwork in CM 1:5 mix using IInd class chamber burnt brick of size 9"x 4 1/4"x 2 3/4" including cost of materials labour lead lift curing etc complete.

Brick work Upto basement

Brick work in Ground Floor

Brick work in First Floor

Brick work in second Floor

Brickwork in CM 1:3 mix using IInd class chamber burnt brick of size 9"x 4 1/4"x 2 3/4" including cost of materials labour lead lift curing etc complete.

Brick work in Ground Floor

Brick work in First Floor

Plastering in CM 1:5 mix, 12mm thick including cost of materials, labour, curing, lead, lift etc. complete

Plastering in CM 1:3 mix, 12mm thick including cost of materials, labour, curing, lead, lift etc. complete

Plastering in CM 1:3, 20mm thick including cost of materials, labour, curing, lead, lift etc. Complete

Filling basement with exacated earth including cost of materials, lead, lifts, watering, well ramming etc, complete.

Providing Reinforcement for R.C.C. Works including cost of steel and lead, lift, labour for cutting, bending and Placing reinforcement as per plan and Tying with binding wire and including Cost of binding wire, labour and work at levels etc.

Supply and fixing in position of double leaf anodised aluminium glazed main door using door outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and divider and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M with std.quality hydraulic floor spring, automatic door closer, rubber beedings, hinges, handle, etc., with 5.50mm thick sun cool glass, etc., complete.

Manufacturing and fixing in position of single leaf anodised aluminium partially glazed door using 100x44x2mm box section for frame and 95x44x2mm for shutter bottom style and 65x44mm section for other side style with glazing clips rubber beadings hinges handle, hydraulic door closer etc & bottom with 12mm thick one side laminated MDF duratuff exterior Board and top with 5mm thick CGL make cooling glass etc complete.

Supply and fixing UPVC (Un-Plasticized Polyvinyl chloride) windows of casement type (Open) from the profile the size of outer frame 60mmx58mm and shutter profile are reinforcement with GI/1mm 125GsM and 100% corrosion free, the profiles are multi-chambered sections with wall thick of 2mm EPDM rubber covered with over all the edges of frame and shutter the shutter will be provided with espag multi power point locks and also it operates as handle. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the EE before use on work cost of all materials, lead, lift etc., complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 8mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (blackcolour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned. Radiations pin headed or Pin headed/Fluted/Figured glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The ventilator should be got approved from the Executive Engineer befoe use on work and as per specifications

Supplying and fabricating, fixing of steel door using 40x40x6mm M.S. Angle for door frame and in shutter with 35x35x5mm unequal M.S. Sheet as per plan and fabricating and fixing and painting with a coat of red oxide and finishing two coats of enamelled paint etc. including cost of materials lead lift etc complete as per standard drawing and specification

Supplying and fabricating, fixing of steel Window using 40x40x6mm M.S. Angle for door frame and in shutter with 35x35x5mm unequal M.S. Sheet as per plan and fabricating and fixing and painting with a coat of red oxide and finishing two coats of enamelled paint etc. including cost of materials lead lift etc complete as per standard drawing and specification

Supplying and fixing of PVC door shutter made of chamber solid plastic sections of size 200mmx20mm thick and PVC extracted shutter frame of size 24mmx50mm including necessary hard make PVC shutters including cost of anodised aluminium fittings as per drawing and specification including cost of materials lead lift etc complete.

Supplying, fabricating and fixing in position of Grills using square rod, MS flat etc, including cost of materials, lead, lift, labour, painting with one coat of best quality red oxide paint etc., complete .

Supplying and fixing of fire rated (2 hours) door as approved make including cost of material, labour, transport charge, etc., complete.

Flooring with Eurocon tiles 20mm thick of approved quality embedded in CM 1:3, and pointing with same coloured grout powder For portico including cost of cement, materials,curing, labour, lead and lift etc., complete.

Flooring with vertified tiles of size 600x600x10mm over CM 1:3, 20 mm and pointed with white cement including cost of materials, lead.lift etc complete.

Flooring with non-slippery ceramic tiles over CM 1:3, 20 mm and pointed with white cement including cost of materials, lead, lift etc complete.

Providing decorative terracota tiles over CM 1:3, 20mm thick and pointed with white cement including cost of material, labour, transport charge, etc., complete.

Providing and laying in position of ceramic acid resistance tiles over a bed of 20 mm thick CM 1:3, including pointing with acid resistant cement mortar for flooring in battery room including cost of materials, lead, lift etc complete.

Dadooing walls with galzed tiles over CM 1:3, 20 mm and pointed with white cement including cost of materials, lead.lift etc complete.

Granolithic cement concrete M15 mix for floor finish 20 mm thick using stone chippings of 10 mm size and below.including cost of materials, labour, lead, lift etc complete

Providing Weathering course of pressed tiles 200x200x20mm using CM 1:3,12mm thick and pointing with same mortor mixed with Crude oil1 10% by weight of cement over Brickjelly concrete of 80mm thick with the ratio of 32:12:5 (No sand) to required slope and beaten with wooden beats including cost of materials, curing etc. complete.

Providing Damp proof course using cement mortar 1:3, 20mm thick with water proofing compound including cost of materials lead lift etc., complete

White washing two coats using white cement including cost of materials, labour, lead, lift etc. complete

Painting two coats with approved interior/exterior emulsion paint over one coat of white cement primer & wall putty for inside/outside wall including cost of materials, labour, lead, lift etc including scaffolding etc. complete

Painting with two coats acid proof paint of approved colour over a priming coat of white cement including cost of materials, labour, lead, lift etc complete for interior walls.

Fixing of bore well point by well qualified geologist labour T & P including lead lift etc complete as directed by the department engineer at site.

Drilling of borewell of size 160mm dia in classification of soils including hard rocks using Power RIG, Hamer RIG, charges for transporting the power Rig to site, operation charges lead, lifts, labour, etc, complete.

Supplying, and fixing of 150mm dia PVC perforated pipe of 10kg/cm² pressure for bore well including cost of lead,lift labour,materials etc.,complete

Supplying, and fixing of 150mm dia PVC casing pipe of 10kg/cm² pressure for bore well including cost of lead,lift labour,materials etc.,complete

Supplying, and fixing of 110mm dia PVC casing pipe of 10kg/cm² pressure for bore well including cost of lead,lift labour,materials etc.,complete

Supplying and fixing of 3 phase 5 HP compressor pump with motor and accessories of approved ISI make as directed by site engineer including cost of materials, handling charges, lead, lift, etc. complete

Supplying and erection of 3 phase 3 HP submersible multi stage electrical motor and pump of approved brand with related accessories as per ISI in respect including oil level indicator switch board with 3 Nos. test lamp, 3 Nos. fuse carrier, 1 No. 15AMPS DPIC switch with L&T make starter with guard and providing earthing to main with no. 8 tinned copper wire rod and 6' long 40mm dia GI pipe for earthing and earth pit filled with charcoal and salt as per standard spectification and laying motor bed by concrete with placing motor over bed, labour charge for placing motor over bed including cost of materilas lead and lift etc, complete as driected by the department engineer at site.

Supplying and erection of 2HP mono block 3 phase electrical motor of approved brand with accessories including oil level indicator switch board with 3 Nos. test lamp, 3 Nos. fuse carrier, 1 No. 15AMPS DPIC switch with L&T make starter with guard and providing earthing to main with no.8 tinned copper wire rod and 6' long 40mm dia GI pipe for earthing and earth pit filled with charcoal and salt as per standard spectification and laying motor bed by concrete with placing motor over bed including cost of materilas, labour, lead and lift etc, complete

Supplying & wiring with 2x4 Sq.mm. flat type submersible cable of approved ISI make for connecting the submersible motor and to the panel board and clamping with the PVC pipe with suitable clamps inside the borwell including cost of materials, labour, lead, lift etc., complete as directed by the department engineer at site.

Supplying and fixing of HDPE Pipe 10kg/cm² of fine/flow ISI make with connecting specials including cost of materials, welding, lead, lift, etc., complete

32mm dia HDPE pipe

25mm dia HDPE pipe

Supplying and fixing of 32 mm dia 10kg/cm² PVC pipe including the cost of materials,l ead, lift, etc.,complete

Supplying and fixing of 25 mm dia 10kg/cm² PVC pipe including the cost of materials,lead,lft,etc.,complete

Supplying and fixing of 15 mm dia 10kg/cm² PVC air pipe including the cost of materials,lead,lft,etc.,complete

Supplying and erection of 15 mm dia GI 'B' class pipe for delivery outside bore coupling bend labour for cutting threading fixing and tigtening etc. complete.

Supplying and fixing in position 160 mm dia PVC soil pipe- 6kg/sq.cm [Finolex or equivalent] with special clamps & PVC shoe at bottom including the cost of materials, labour, lead, lift, T&P, etc., complete

Supplying and fixing in position 3 Phase of 33 Amps L & T starter coil type bush button type including cost of labour, transport etc. complete.

Supplying and fixing in position of gun metal gate valve approved make of best quality including cost of materials lead lift labour etc complete.

32mm dia

25mm dia

15mm dia

Supplying and fixing in position of Gun Metal Wheel valve approved make of best quality including cost of materials lead lift labour etc complete.

32mm dia

25mm dia

15mm dia

Supplying and fixing in position of 15 mm dia Brass chromium plated bib cock of ISI make approved quality including cost of material, labour, transport charge, etc., complete.

Supplying and fixing of Brass chromium plate shower and Nickle control valve including cost of material, labour, transport charge, etc., complete.

Supplying and fixing in position white glazed Flat back urinal - Size 455 x 350mm of approved make and quality [Parryware - equivalent] and with PVC pipe connection [Kohinoor], 32mm PVC waste pipe, 12/15mm GM wheel valve ISI, fixing the urinal to the valve with necessary TW plugs, brass screws etc, connecting to the water main including the cost of materials labour, lead, lift, T&P etc. complete.

Providing PVC downfall pipe using 110mm dia 6KSC PVC pipe and PVC clamp line supreme etc including fixing SWR washer type door bend and shoe in correct postion and connecting from the roof slab including cost of materials labour transport lead lift etc complete including SWR accesries and washers.

Supplying and fixing 100x75mm PVC floor trap with one PVC door bend, shoe of 50mm dia including cost of materials lead lift etc complete

Providing PVC door bend 50mm dia including fixing in position cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing 110mm dia PVC Bend including cost of materials, labour lead lift, etc. Complete

Supplying and fixing 110mm dia PVC TEE including cost of materials, labour lead lift, etc. Complete

Supplying and fixing of European Water Closet with "P" or "S" Trap with Double Flapped Seat and Seat Cover with Brass Hinges and 10 litre capacity PVC Low Level Flusing Tank with internal fittings including cost of materials and leads, lifts, labours for fixing etc., complete.

Supplying and fixing of Indian type water closet with foot rest combined set 20” size white glazed parry ware with “P” or “S” trap including cost of materials and leads, lifts, labours for fixing etc., complete.

Supplying and fixing of wash hand basin size 550x450mm of white glazed with C.I. brackets c.p.pillar tap and connection of water inlet and waste water connection 12mm wheel value soap container and fixing of 5mm thick mirror best quality etc.complete

Supplying and fixing of approved quality of brass chromium plated towel rod 60cm long and 20mm dia with brackets including cost of materials lead lift etc complete

Supplying and fixing of 110mm dia PVC pipe, cowl for ventilating shaft., to a height of 10' length with proper B.W. with C.M.1:5mix plastering 12mm thick including cost of materials,lead, lift etc. Complete.

Supplying and fixing of one side polished 50mm thick Cuddappa slab for cupboards including cost of materials lead lift etc. complete

Providing inspection chamber with manhole cover depth varying from 0.75 to 1.5m including cost of materails lead lift etc complete.

Cast Iron (Heavy duty) 0.45x0.45 m

Cast iron (Heavy duty) 0.60 x 0.60 m

Supplying and fixing of 1000 litre capacity PVC tank ISI make approved quality including cost of material, labour transport charge GI nipple, GI union, for fixing etc, complete.

Supplying and fixing of 6mm thick chequered plate for the cable duct cover including the cost of materials,lead lift, etc, complete

Fabrication and erection of Name Board of vinyal sticker laminated in alco panel using 18 gauge M.S. sheet with outer in suitable angle and stiffener at the rear side of MS flat including the cost of materials,lead lift, etc, complete

Supplying and fixing black granite stone Engraved Design detail and fixing in wall at entrance, Digital wall clock 2 Nos, floor coir mat 2000x600 for Entrance 1000x500 - 2 No. for office of approved make and quality including the cost of materials, leads, lifts etc., complete

Wiring with 2x1.5 sq.mm PVC insulated SC unsheathed copper conductor cable 1100 v grade in suitable PVC rigd pipe on wall and ceiling with reputed make switch boxes earthwire connection in 14 SWG TC wire (For Electronic regulator) including cost of wire, labour lead etc. complete. For light point / Fan point

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick hylum sheet cover for 5 A 3 Pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Plug point.

wiring with 2 x 4 sqmm (56x0.3) PVC insulated single core unsheathed copper cable 1100 v grade in suitable PVC rigd pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150x100x63 mm TW Swich box with 3mm thick hylem sheet for 15 A 3 PIN non interlocking CS plug with continuous earth wire 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point

Supply and fixing of 3 phase 4 wire 4 way ICDB of 16A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connections on suitable angle iron frame work etc. complete with PWD earthing.

Supply and fixing of 32 A TPN Metal clad switch on suitable angle iron frame work with MS cable entry box with PWD earthing

Supply and run of 4 of 4 sqmm PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire 14 SWG TC wire and making good of the concealed portion with painting of suitable colour

Supply and fixing of single LED type fitting with electronic choke and condenser with conduit pipe suspension from the ceiling with PVC unsheathed Copper leads from terminal to the fittings with LED tube

Supply and fixing of 4'x40 W Twin type Mirror optic suspension type fitting (Philips /Crompton / Wipro or euivalent) complete with louvers cover complete with copper chokes and condensor with conduit pipe suspension, with PVC unsheathed copper leads from the terminals to the fittings with flu. tubes.

Supply and fixing of W.T bulk head fitting (Philips / Bajaj or equivalent) suitable for LED lamp with guard and 1No 8W LED bulb.

Supplying and fixing 70-75W LED lamp single fittings with reputed make including cost of materials, lead, lift, etc., complete

Supply and fixing of fancy glass shade and 18W CFL for BH point.

Supply and fixing of 1400 mm (56") AC ceiling fan complete with stepped electronic 300 W regulator with 1.0m down rod on the existing clamp

Supply and fixing of 1200 mm (48") AC ceiling fan with stepped electronic 300W regulator with 1.0 meter down rod on the existing clamp.

Supply and fixing of 375 mm (15") sweep (heavy duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supplying and fixing of RCCB safe trip of approved ISI make, 25amps with suitable box including cost of materials labour, lead, lift, etc., complete

supply and fixing of Horizontal type 4 way pole neutral MCB distribution board in sheet steel enclosure with40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection.The MCBDB and MCB's should be with ISI mark)

Earthing as per PWD standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work.

Supplying and fixing of split Air Conditioner (3 phase -2 Ton capacity) of approved make (Dikin or equivalent) with accessories including stabilizer (V-guard) with reputed make including cost of materials, leads, lift, fixing charges, etc., complete as per standard specification complete.

Supply and fixing of 20 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in flush with wall with earth connection (For AC plug)

Supplying and laying of 4 core 16 Sqmm copper PVC armoured LTUG cable including cost of cable, lead, lift, labour charge, etc., complete.

Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 Amps per way with 63 A TPN MC switch with suitable trunking box MS cable entry and internal connection in suitable angle iron frame work,with earth connections.

Supplying and fixing of 4 pole 32 Amps Isolator 1 No with MCB box 4 pole including terminal block for testing purpose at relay and CC room, cost of materials, lead, lift, labour charge, etc., complete.

Supplying and fixing 5/8" copper tube for connecting AC panel to AC out door unit including cost of materials, lead, lift, labour charge, etc., complete.

Supplying and laying 25 mm dia PVC pipe @10 kg/cm² of approved quality for AC unit water drain pipe including cost of materials, lead, lift, labour charge, etc., complete.

Laying and fixing of Controflex (slicagel) compound in around ventilator for protection of rain water including cost of materials, lead, lift, labour charge, etc., complete.

Supplying and fixing of 100mm dia. stoneware pipe with open joint and covered with pan tiles including cost of materails lead lift etc complete.

Supply & fixing marble partition of 25 mm thick 600 mm wide and 1200 mm high including necessary cement mortar with white cement concrete for urinals as directed by department Engineer at site

Supplying &Fixing of buzzers with 5A bell push switch etc complete.

Providing opening for cable, AC duct / water pipe line etc in brick work/RCC in building and retaining wall& cable duct including cost of machinaries labour etc complete as directed by dept engineer at site.

Brick wall

RCC work

Supplying and fixing of vertical blinds in window including cost of accessories, transport, fixing charges etc complete.

Supplying and fixing musical quartz type Wall Clock of size 30 x 30 cm of approved quality such as Ajantha / Seiko/ Citizen or equivalent including transport, fixing charges etc complete.

Manufacturing and fixing of pull and push type rolling shutter of 18 gauge as per standard specification and as directed by the eanginner at site with all locking arrangements including cost of all materials, labour, lead, lift, etc. complete

Supplying, fabrication and fixing of G.I/M.S angle of various sizes of required length including cost of materials, labours, lead, lift, etc. complete

Providing casing pipe line for laying cable to breaker plinths with 110 mm dia PVC pipe 6 kg/cm2 including all specials and cost of all material, lead, lift, etc., complete as per standard specification.

Painting exposed faces of angles with two coats of enamel paint over one coat of primary coat including cost of materials, labours, lead, lift, etc. complete

Supplying, Fabricating and fixing Aluminum partition partly glazed & partly paneled (600x600mm) with 12mm thick MDF Board both side melamine finish and 5.5mm thick Machine Frosted float glass ( Mode, Saint Gobin or equivalent ) using aluminum box section 63x37mm @ 0.85kg/m and for bottom section 95x45mm and 2mm thick including cost of materials, labour, lead, lift, T & Ps etc complete. In accordance with ISI 1868, 1962 specification for an average anodic film thickness not less than 5 microns and the materials should be got approved from the Executive Engineer before use.

Supplying and fixing of Steel ladder using 50mmx50mmx6mm MS double angle for two sides and steps including cost of materials leads, lifts, labour, primer coat, fixing charges etc, complete

Supplying and fixing in position of Chromium coated hand rail of 75mm pipe to height of 1000 mm and support of 25mm above square /round including cost of materials, labour, lead, lift, T&P etc. complete

Supplying & fixing of 100X50mm channel for seating control panel including cost of materials, cutting the channel to the required length and welding grip rods for the rails,transport charges,labour for fixing and handling etc.,complete.

Providing false flooring by using 600x600mm size fully interchangeable panels with 1mm fire retardant floor grade anti-static laminate/ESD Laminate-PVC/Conduit/Dissipative PVC on a semi- Automated lamination with bonding of steel structure of approved colour and PVC beading along the edges with the provision of perforated panel, grating panel, vision panel, koldlok, grommet of required sizes etc over the pedestal which consist of 75x75x3.50m thick galvanized epoxy polyester coated MS Base plate die-pressed orbitally riveted to a 100mm long 19mm dia rolled formed stud and check nuts for level adjustment and arresting vertical movement. The pedestal head consist of an anti-vibration PVC Cap for panel location. The sub structure assembly shall be suitably anchored to the floor with suitable adhesive and the under structure system consists of stringers of size 21x32x1.2x570 to form grid of 600x600mm including materials, labour for preparation of surfaces wastages, lead and lift, grouting the system with anchor fastener, providing ramp and landing in the entry finished with the antistatic laminate panel etc., complete as per the specifications and drawings and as directed by Engineer.

Providing false ceiling by using 10.0mm thick perforated gypsum board in panels using 6mm GI rod suspender ,16 gauge aluminium "T" and "L" including materials, labour, lead and lift etc., complete.

Supplying and fixing in position sun control polyester flim, reflective type 75 microns thick (gareware or equivalent ) including the cost of materials, labour, lead, lift, T&P, etc. Complete.

Supplying and sticking the name / designation stickers in doors identifying the rooms including cost of material, labour etc. complete.

Supplying furnitures manufactured by TANSI or any other ISI make including cost of materials, transport, lead lift labour etc complete (Sample to be approved by Department Engineer)

Steel Almirah of size 61/2'x3'x11/2" with four shelves forming five compartment

Steel S type chair with arm

Three drawer steel table with sun mica top of size 1200x750x750mm

Steel side rack open type 1100x400x1200mm

Steel half bench 1200x400x600mm

Revolving chair

Operator table 6'x5'

PVC Nylon chair of approved quality

Steel stool

Providing locking arrangements with 6 lever Godrej lock with 3 keys including cost of materials, labour, lead and lift etc., complete.

Providing projected border of 7.50cm width on top of wall in CM 1:3, 12mm thick including cost of material labour, lead, lift, curing etc., complete.

Providing projected border of 20cm width on top of wall in cm 1:3, 20mm thick including cost of material labour, lead, lift, curing etc., complete.

Supplying and spreading of 40mm HBG metal including cost of labour for spreading, lead, lift, etc. complete.

Hire charges for JCB for levelling the site including cost of hire charges,fuel charges, labour lead and lift etc. complete.

Supply and Filling with gravel including cost and conveyance of gravel to work site, laying, handling charges and filling in layers, necessary consolidation and other incidental charges etc., complete

Clearing scrub jungle and disposing away from site including cost of labour, lead, lift, etc., complete.

Clearing Juliflora Jungle with Uprooting and disposing away from site including cost of labour, lead, lift, etc., complete.

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales,murram, gravel, stoney earth and earth mixed with small size boulders SS.20.B

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Soft disintegrated rock, laterite, soft rock or kankar, not requiring blasting.

Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in medium rock and dense medium rock not requiring blasting

Providing shoring, shuttering and removing the same after concreting including cost of materials lead lift etc complete.

Dewatering charges per hour including hire charges for 10/15HP Diesel motor with pump cost of materials, Labour, lead, lift etc. complete

PCC M10 using 12mm to 20mm metal without formwork including cost of materials, Labour charges, curing charges, lead, lift etc. complete

RCC M25 mix using 12mm to 20mm HBS metal (machine crushed) without formwork including cost, labour, materials, lead, lift, curing, etc., complete. But excluding cost of steel reinforcement (By using mixer machine and vibrator). RAFT

RCC M30 mix using 12mm to 20mm HBS metal (machine crushed) with formwork including cost labour materials lead lift curing etc complete but excluding cost of steel reinforcement (By using mixer machine and vibrator) Plinth

Plastering in CM 1:3 mix, 12mm thick including cost of materials, labour, curing, lead, lift etc. complete

Providing Reinforcement for R.C.C. Works including cost of steel and lead, lift, labour for cutting, bending and Placing reinforcement as per plan and Tying with binding wire and including Cost of binding wire, labour and work at levels etc.

Colour washing two coats using approved cement paint over one coat of primer including cost of materials, labour, lead, lift etc. complete

Assembling of template for 230kv & 110kv tower, structure & equipment plinth including cost of material, transport of template lead lift etc., complete

Providing pipe type earthing using 32mm dia G I pipe 3m length drilling with 6mm dia holes staggered at 230mm interval ,top falttened and providing 17.5m dia hole 2nos.fabrication of earth strip including cost of pipe,GI 7/3.55 E.wire 3.00 m length including labour, lead, lift etc. complete.

Supplying, fabricating, galvanising tower parts as per ISS or relavent standards and specification including cost of materials, galvansing charges, and transporting charges to site store, furnishing test certificate etc., complete.

Supplying and transport of various size of ISI GI bolt & nut and washer as per the IS standards and approved by competent authority before erection as per the requirement to site including cost of materials,labour, lead, lift, etc., complete

Supplying and fabrication of foundation bolt with various sizes of required length including threading with 3 No. of GI nut & washers and fixing in position as directed by Engineer including material, labour, lead, lift, etc., complete.

Labour charges for erection of towers including sorting out of tower parts tightening, punching of bolts and nuts and rectification of defects if any during erection cost of materials, labour, lead, lift, etc., complete.

Painting with anticorrosive paint two coats including cost of materials, lead, lift, etc., complete

Clearing scrub jungle and disposing away from site including cost of labour, lead, lift, etc., complete.

Clearing Juliflora Jungle with Uprooting and disposing away from site including cost of labour, lead, lift, etc., complete.

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales,murram, gravel, stoney earth and earth mixed with small size boulders SS.20.B

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Soft disintegrated rock, laterite, soft rock or kankar, not requiring blasting.

Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in medium rock and dense medium rock not requiring blasting

Supply and filling with M-sand for foundation & basement including cost of materials, watering, consolidation etc. with leads, lifts etc. complete

PCC M10 mix using 12mm to 20mm metal without formwork including cost of materials, Labour charges, curing charges, lead, lift etc. complete

PCC M15 using 12mm to 20mm metal without formwork including cost of materials, Labour charges, curing charges, lead, lift etc. complete

RCC M25 mix using 12mm to 20mm HBS metal (machine crushed) without formwork including cost, labour, materials, lead, lift, curing, etc., complete. But excluding cost of steel reinforcement (By using mixer machine and vibrator). RAFT

RCC M30 mix using 12mm to 20mm HBS metal (machine crushed) with formwork including cost labour materials lead lift curing etc complete. But excluding cost of steel reinforcement (By using mixer machine and vibrator). COLUMN

Column Upto basement

Column in Ground floor

RCC M30 mix using 12mm to 20mm HBS metal (machine crushed) with formwork including cost labour materials lead lift curing etc complete but excluding cost of steel reinforcement (By using mixer machine and vibrator) GRADE BEAM

RCC M30 mix using 12mm to 20mm HBS metal (machine crushed) with formwork including cost labour materials lead lift curing etc complete but excluding cost of steel reinforcement (By using mixer machine and vibrator) PLINTH BEAM

RR masonry in CM 1:6 mix using hard blue granite stone for foundation and basement including cost of labour materials lead lift curing etc complete.

Pointing with CM 1:3 mix for RR masonry including cost of materials labour lead lift etc complete

Brickwork in CM 1:5 mix using IInd class chamber burnt brick of size 9"x 4 1/4"x 2 3/4" including cost of materials labour lead lift curing etc complete.

Brick work in Ground Floor

Plastering in CM 1:5 mix, 12mm thick including cost of materials, labour, curing, lead, lift etc. complete

Plastering in CM 1:3 mix, 12mm thick including cost of materials, labour, curing, lead, lift etc. complete

Providing of Granular Sub base using Grade I materials of table 400 - 1 of Morth with minimum CBR spreading in uniform layers with motor grader on prepared surface, mix in by place method at OMC and compacting with Vibratory Roller to achieve the desired density including Labour charges etc, complete as per technical specification and as directed by the departmentals

Wet Mix Macadam (Table 400-13) Providing laying spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in machanical mix plant carriage of mixed Material by tipper to site,laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per clause 406 of MORTH VTh Revision specification No 111,112,406 & 900

Providing concrete road with R.C.C M20 using 12 to 20 mm HBS metal with form work including cost of materials lead and lifts etc.complete.

Providing Reinforcement for R.C.C. Works including cost of steel and lead, lift, labour for cutting, bending and Placing reinforcement as per plan and Tying with binding wire and including Cost of binding wire, labour and work at levels etc.

Providing expansion joint for road concrete as per specification in both direction using prevalid aspheltics pad 20 mm thick to full width and depth of 150mm thick including cost of materials, labour, curing, leads, and lifts, etc., complete.as per standard specification.

Supplying, fabricating and fixing in position of Grills using square rod, MS flat etc, including cost of materials, lead, lift, labour, painting with one coat of best quality red oxide paint etc., complete .

Colour washing two coats using approved cement paint over one coat of primer including cost of materials, labour, lead, lift etc. complete

Supplying, fabrication and fixing of G.I/M.S angle of various sizes of required length including cost of materials, labours, lead, lift, etc. complete

Supplying and fixing of 10 gauge best Quality GI Barbed wire 8 rows horizontal at equal spacing including cost of eye bolt, nut for tightening with Y shaped fencing post and other binding materials etc. complete as directed by the engineer.

Painting exposed faces of angles with two coats of enamel paint over one coat of primary coat including cost of materials, labours, lead, lift, etc. complete

Clearing scrub jungle and disposing away from site including cost of labour, lead, lift, etc., complete.

Clearing Juliflora Jungle with Uprooting and disposing away from site including cost of labour, lead, lift, etc., complete.

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales,murram, gravel, stoney earth and earth mixed with small size boulders SS.20.B

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Soft disintegrated rock, laterite, soft rock or kankar, not requiring blasting.

Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in medium rock and dense medium rock not requiring blasting

Providing shoring, shuttering and removing the same after concreting including cost of materials lead lift etc complete.

Dewatering charges per hour including hire charges for 10/15HP Diesel motor with pump cost of materials, Labour, lead, lift etc. complete

PCC M10 using 12mm to 20mm metal without formwork including cost of materials, Labour charges, curing charges, lead, lift etc. complete

PCC M15 using 12mm to 20mm metal without formwork including cost of materials, Labour charges, curing charges, lead, lift etc. complete

PCC M15 using 12mm to 20mm metal with formwork including cost of materials, Labour charges, curing charges, lead, lift etc. complete

PCC M20 using 20mm metal without formwork including cost of materials, Labour charges, curing charges, lead, lift etc. complete

RCC M25 mix using 12mm to 20mm HBS metal (machine crushed) without formwork including cost, labour, materials, lead, lift, curing, etc., complete. But excluding cost of steel reinforcement (By using mixer machine and vibrator). RAFT

RCC M30 mix using 12mm to 20mm HBS metal (machine crushed) with formwork including cost labour materials lead lift curing etc complete but excluding cost of steel reinforcement (By using mixer machine and vibrator) Plinth

Brickwork in CM 1:5 mix using IInd class chamber burnt brick of size 9"x 4 1/4"x 2 3/4" including cost of materials labour lead lift curing etc complete.

Brick work Upto basement

Plastering in CM 1:3 mix, 12mm thick including cost of materials, labour, curing, lead, lift etc. complete

Providing Reinforcement for R.C.C. Works including cost of steel and lead, lift, labour for cutting, bending and Placing reinforcement as per plan and Tying with binding wire and including Cost of binding wire, labour and work at levels etc.

Supplying, fabricating and fixing in position of Grills using square rod, MS flat etc, including cost of materials, lead, lift, labour, painting with one coat of best quality red oxide paint etc., complete .

Colour washing two coats using approved cement paint over one coat of primer including cost of materials, labour, lead, lift etc. complete

Supplying, fabrication and fixing of G.I/M.S angle of various sizes of required length including cost of materials, labours, lead, lift, etc. complete

Supplying and fixing of 50sqmm chainlink fence of 12 gauge with standard width and height including tensioning at corner post with bolts and nuts including cost of materials, labours, lead, lift, etc. complete.

Suplying and labour for unwinding, laying and tensioning of 7.5x 2.5 cm 10 guage GI weldmesh fencing to a height of 1.80m as per standard specification and as instructed by the engineer at site including cost of materials, G.I binding wire, J bolt etc., labour,lead, lift, etc. complete.

Supply and Fixing of M.S rail (90 lbs) for transformer plinth including cutting the rail to the required length and welding grip rods for the rails,transport charges,labour for fixing and handling etc.,complete.

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Soft disintegrated rock, laterite, soft rock or kankar, not requiring blasting.

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Soft disintegrated rock, laterite, soft rock or kankar, not requiring blasting.

Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in medium rock and dense medium rock not requiring blasting

PCC M10 12mm to 20mm metal without formwork including cost of materials, Labour charges, curing charges, lead, lift etc. complete

RCC M25 using 12mm to 20mm HBS metal (machine crushed) without formwork including cost, labour, materials, lead, lift, curing, etc., complete. But excluding cost of steel reinforcement (By using mixer machine and vibrator). RAFT

RCC M30 using 12mm to 20mm HBS metal (machine crushed) with formwork including cost labour materials lead lift curing etc complete. But excluding cost of steel reinforcement (By using mixer machine and vibrator). COLUMN

Column Upto basement

Column in Ground floor

RCC M30 12mm to 20mm HBS metal (machine crushed) with formwork including cost labour materials lead lift curing etc complete but excluding cost of steel reinforcement (By using mixer machine and vibrator) GRADE BEAM

RCC M30 using 12mm to 20mm HBS metal (machine crushed) with formwork including cost labour materials lead lift curing etc complete but excluding cost of steel reinforcement (By using mixer machine and vibrator). PRE CAST SLAB

RCC M30 using 12mm to 20mm HBS metal (machine crushed) with formwork including cost labour materials lead lift curing etc complete but excluding cost of steel reinforcement (By using mixer machine and vibrator) Plinth

RR masonry in CM 1:6 mix using hard blue granite stone for foundation and basement including cost of labour materials lead lift curing etc complete.

Pointing with CM 1:3 mix for RR masonry including cost of materials labour lead lift etc complete

Brickwork in CM 1:5 mix using IInd class chamber burnt brick of size 9"x 4 1/4"x 2 3/4" including cost of materials labour lead lift curing etc complete.

Brick work Upto basement

Brick work in Ground Floor

Plastering in CM 1:5 mix, 12mm thick including cost of materials, labour, curing, lead, lift etc. complete

Plastering in CM 1:3 mix, 12mm thick including cost of materials, labour, curing, lead, lift etc. complete

Providing Reinforcement for R.C.C. Works including cost of steel and lead, lift, labour for cutting, bending and Placing reinforcement as per plan and Tying with binding wire and including Cost of binding wire, labour and work at levels etc.

Colour washing two coats using approved cement paint over one coat of primer including cost of materials, labour, lead, lift etc. complete

Supply and laying interlocking concrete paver of approved make with M40 grade concrete block with minimum thickness of 80mm and providing minimum 100mm thick Quarry dust cushion below the pavers and completing the same as per direction including cost of materials, labour, lead, lift, curing, etc. complete.

Supplying and filling of Quarry dust including cost of materials, spreading, watering, lead, lift etc. complete

Supplying and fixing in position of gun metal gate valve approved make of best quality including cost of materials lead lift labour etc complete.

32mm dia

25mm dia

15mm dia

Supplying and fixing in position of Gun Metal Wheel valve approved make of best quality including cost of materials lead lift labour etc complete.

32mm dia

25mm dia

15mm dia

Supplying and fixing in position of 15 mm dia Brass chromium plated bib cock of ISI make approved quality including cost of material, labour, transport charge, etc., complete.

Supply and fixing of 600mm dia RCC spun pipe NP 3 for road crossing drains wherever necessary including cost of all material, labour for laying, lead, lift etc. complete as directed by the engineer at site.

Providing casing pipe line for laying cable to breaker plinths with 110 mm dia PVC pipe 6 kg/cm2 including specials and cost of material, lead, lift, etc., complete as per standard specification.

Providing weep holes including cost of PVC pipes 25/40 mm dia of suitable length, labour for fixing them in position etc complete

Providing opening for cable, AC duct / water pipe line etc in brick work/RCC in building and retaining wall& cable duct including cost of machinaries labour etc complete as directed by dept engineer at site.

RCC work

Providing rain water recharge bore holes by drilling of 300 mm dia bore hole 6.00 m depth and filling the holes with hard broken stone of size 40 m as directed by engineer at site including the cost of materials, lead, lift, labour, T&P etc complete.

Supplying, fabrication and fixing of G.I/M.S angle of various sizes of required length including cost of materials, labours, lead, lift, etc. complete

Providing casing pipe line for laying cable to breaker plinths with 110 mm dia PVC pipe 6 kg/cm2 including all specials and cost of all material, lead, lift, etc., complete as per standard specification.

Refilling with excavated earth other than sand in layers of 150mm thick, including charges for spreading watering, consolidation as per standard speclification and as directed by the Engineer at site including Labour charges lead and lifts etc., complete.

Supplying and fixing readymade earth collars of size 60 cm inner dia with 30 cm height and shell thickness of 50 mm with cover slab including cost of materials, transport to site, labour, lead, lift, etc., complete as per standard specification.

Drilling 4½" dia hole in brick wall and fixing 110 mm dia PVC pipe @6 kg/cm² in wall for providing cables for out door condencing unit including cost of materials, lead, lift, labour charge, etc., complete.

Drilling 2" dia hole in brick wall and fixing 50 mm dia PVC pipe @6 kg/cm² in wall for providing cables for out door condencing unit including cost of materials, lead, lift, labour charge, etc., complete.

Supplying and laying 100, 50mm and 20mm dia B Class GI pipe for air pipe connecting borewell to motor including earthwork excavation, refilling necessary fittings, materials, labour, lead and lift etc., complete as directed by the department engineer at site.

20mm dia GI pipe

50mm dia GI pipe

100mm dia GI pipe

Supplying and spreading of 25mm HBG metal including cost of labour for spreading, lead, lift, etc. complete.

Hire charges for JCB for levelling the site including cost of hire charges,fuel charges, labour lead and lift etc. complete.

PCC M20 using 20mm HBS metal for concreting the Pre cast curb stone slab for road including cost of materials, labour, lead, lift, etc complete as per the specification and drawing. But excluding cost of steel reinforcement.

Labour charges for transporting aligning and fixing of Precast curb stone slab along the road side as directed by the site engineer including labour for earth work excavation, lead, lift and refilling the trench etc complete

Supplying and spreading of well gravel for low lying area including labour for consolidation, lead, lift, etc. complete.

Supply and filling of earth without clay from approved quarry to work site for filling the yard and low laying area including cost of earth, conveyance, consolidation and other incidental charges etc complete as per standard specification.

Supply and Filling with gravel including cost and conveyance of gravel to work site, laying, handling charges and filling in layers, necessary consolidation and other incidental charges etc., complete

Labour charges for transporting from casting yard to curing tank,curing tank to cable duct, aligning and laying of RCC pre cast slab as directed by the site engineer including labour lead lifts etc complete

Supply and Fixing in position of colour coated roofing sheets with lining enamel with standard thickness 0.50mm and required sizes over the fabricated and erected truss with the provision of hook arrangements, including cost of materials, transporting, Labour charges, welding charges, cutting charges, drilling holes with provision of GI bolt, nut and washers of required sizes for holding sheet leads and lifts etc., complete and placing in position as per the specification and drawings and as directed by Engineer.

Supplying of GI 20mm dia 'J' Bolt & Nut and washer as per IS standards and sample to be approved by competent authority before fixing the roof sheet including cost of material, transport charges, lead lift labour etc complete.

Description of Work / Item(s)

Amount

Transformers

Supply of 230/110kV, 100 MVA Auto transformer with OLTC and NFIPS with RTCC panel & all accessories.

11kV/433 V, Station Transformer - 250 KVA - with HG Fuse set, 11kV LAS and GI structure materials complete set 4way FRP/ GI pillar box, 11kV (1250A) Isolator (5No's) with Insulator for Station Transformer with suitably rated RMU with FRTU including suitably rated HT cables between RMU to station Transformer and termination kits and LT supply cable, accessories and arrangement. FO communication cables with necessary media converter for integrity FRTU in RMU with SAS accessories. (With ingress protection IP-52) fencing for 11kV yard with gate as per the instruction of site Engineer

DG SET 250KVA, 433 V, 3 Ph Diesel Generator Set with all accessories, battery, exhaust pipes with suitable thermal insulation, AMF panel, power cables & all consumables.

Circuit Breakers

245kV, 2000 A, 50KA/3Sec, SF6 Circiut Breaker 220V DC Control with all accessories including mounting structure G.I.Foundation Bolt and standing ladder arrangements.

145kV, 2000 A, 40 KA, SF6 Circiut Breaker 220 V DC Control with all accessories including mounting structure G.I.Foundation Bolt and standing ladder arrangements.

Measurement Transformers

245kV, 2000 A, 50 KA, 5 Core Single phase Outdoor Current Transformer (Ratio 2000-1200-800/1A) with Terminal Connectors. G.I.support Structure, Hot Dip Galvanising Steel Foundation Bolt (1No. Junction Box for 3Nos CT's)

145kV, 2000 A, 40 KA, 5 Core Single phase Outdoor Current Transformer (Ratio 2000-1200-600-300/1A) with Terminal Connectors, G.I.Support Mounting Structure, Hot Dip Galvanising Steel Foundation Bolt (1No. Junction Box for 3Nos CT's)

245kV, 200 VA, 50KA 230KV/√3/110 V /√3, Potential Transformer with Terminal Connectors, G.I.Support Structure, Hot Dip Galvanising Steel Foundation Bolt (1No. Junction Box for 3Nos PT)

145 KV, 200 VA, 110KV/ √3/110V/√3, Potential Transformer with Terminal Connectors, G.I.Support Structure, Hot Dip Galvanising Steel Foundation Bolt (1No. Junction Box for 3Nos PT)

Lightining Arrestors

216 KV, 10KA Station Type Lightning Arrestor with surge Monitor, Terminal connectors and all accessories G.I.Support Structure Hot Dip Galvanising Steel Foundation Bolt

96 KV, 10KA Station Type Lightning Arrestor with surge Monitor, Terminal connectors and all accessories G.I.Support Structure Hot Dip Galvanising Steel Foundation Bolt

Isolators

245 KV, 2000 A, 50 KA, Horizontal Centre Rotating Double Brake with Single earth switch- 440V AC Motor operated with 220V DC Control, 1No MOMD for Main Blade and 1No MOMD for earth switch with Support Insulator, TC and all accessories complete

245 KV, 2000 A, 50 KA, Horizontal Centre Rotating Double Brake without earth switch- 440V AC Motor operated with 220V DC Control, 1No MOMD for Main Blade with G.I.Support Structure Hot Dip Galvanising Steel Foundation Bolt with Support Insulator, TC and all accessories complete

245 KV, 2000 A, 50 KA, Horizontal Centre Rotating Double Brake without earth switch - 440 V AC Motor operated with 220 V DC Control, 1No MOMD for Main Blade for Higher elevation with Support Insulator, TC and all accessories complete

145 KV, 2000 A, 40 KA, Horizontal Centre Rotating Double Brake with Single earth switch- 440 V AC Motor operated with 220 V DC Control, 1No MOMD for Main Blade and 1No MOMD for earth switch including G.I.Support Structure, Hot Dip Galvanising Steel Foundation Bolt with Support Insulator, TC and all accessories complete

145 KV, 2000 A, 40 KA, Horizontal Centre Rotating Double Brake without earth switch- 440 V AC Motor operated with 220 V DC Control, 1No MOMD for Main Blade including G.I.Support Mounting Structure Hot Dip Galvanising Steel Foundation Bolt with Support Insulator, TC and all accessories complete

Supply of Iron and Steels as per latest IS 2062

RS Joist 200*100mm

M.S.Chequred plate 6mm

M.S.Channel 125*65mm

M.S.Channel 100*50mm

M.S.Angle 75*75*6mm

M.S.Angle 65*65*6mm

M.S.Angle 50*50*6mm

Supply and provision of M8, M10, M12 and M16 (full /Half thread) G.I.bolt and nuts of various sizes including plate/ spring washers as required and as directed by the field engineer.

Steel Bolt and Nut, Spring Washer and Flat washer of reputed make of various size for use to all power connectors

Earthing Supply of Earthing Steels as per latest IS 2062

M.S.Flat 75*12mm

M.S.Flat 65*10mm

M.S.Flat 50*8mm

M.S.Rod 40mm

Supply and provision of TERRAC Chemical Compound mixed with site soil in Earth pits for Power Transformer, 5kg per Bag, (Qty Rqt.30kG/ 6m pit). wherever required as directed by the field engineer.

Supply and provision of 12/25x3mm flexible braided copper/ copper flats as required and as directed by the field engineer.

Supply & Crimping of Copper Lugs of Suitable sizes as required and as directed by the field engineer.

Supply and providing of 450-600mm dia, 300mm height, 36mm thick cement collar for identification of earth electrode location as directed by the field Engineer

Insulators, conductors and busbars

245kV, Solid core Insulator G.I.Support Structure with Hot Dip Galvanising Steel Bolt with Terminal connectors and seating clamps

145kV, Solid core Insulator G.I.Support Structure Structure with Hot Dip Galvanising Steel Bolt with Terminal connectors and seating clamps

230kV Solid core insulator

110kV Solid Core Insulator

11kV, 120 KN Ordinary Strain Disc Insulator

75mm Dia Aluminium Bus Bar with welding sleeve

50mm Aluminium Busbar

ACSR Zebra Conductor

Cables

Armoured Copper Control Cable 14C X 4mm2

Armoured Copper Control Cable 8C X 4mm2

Armoured Copper Control Cable 4C X 4mm2

Armoured Copper Control Cable 20C X 2.5mm2

Armoured Copper Control Cable 14C X 2.5mm2

Armoured Copper Control Cable 8C X 2.5mm2

Armoured Copper Control Cable 4C X 2.5mm2

Armoured Copper Control Cable 2C X 2.5mm2

LT Power cable 4C x 120mm2 AL

LT Power cable 4C x 25mm2 AL

LT Power cable 2C x 16mm2 AL

ADSS-48 fibre optic cable with accessories including erection of ADSS

Armoured Copper Cable 2x35mm2

Control & Relay panels

Control & Protection Panel for 230/110KV Auto Transformers with SAS

Control & Protection Panel for 230KV Feeders 220 V DC

Control & Protection Panel for 230KV Bus Coupler Bay 220 V DC

230KV Bus Bar Protection Panel 220 V DC

230KV Synchronizing cum Islanding Panel 220 V DC (SAS)

Control & Protection Panel for 110KV Feeders 220 V DC

Control and Protection Panel for 110KV Bus Coupler bay

110KV Bus Bar Protection Panel

Synchronising cum Islanding Panel for 110KV bays

Spares for Control and Protection panel and for SAS

Substation Automation system for 230/110KV AIS

AC Panel for 230kV SS

Battery, Charger, Jn Boxes

220V DC, 300AH, Station Battery with Single tier teak wood stand with all accessories

220V, 60A Float/ Boost Battery Charger with Potential free contacts for all indications for SAS interface and Change over switch.

48V DC, 250 AH, Station Battery with stand Single tier and with all accessories

48V, 80 A Float / Boost Battery Charger with Potential free contacts for all indications for SAS interface and Change over switch.

200A DC change over switch with panel (1 panel for 4 Switches)

220 V DC Distribution Board with MCB's with one control panel each for change over arrangement of charger supply

48V DC Distribution Board with MCB's for 230kV SS

LT 433 V, AC Distribution Board with MCB's with LT Circuit Breaker Control and Change over switch for 400 KV SS

Outdoor 433 V AC Distribution Cubic with 20Nos, 32A MCB's and 10Nos, 16A MCB's, with weather proof FRP cabinet for all equipments/ Isolators.

Outdoor 220 V DC Distribution Cubic with 30Nos, 32A MCB's with weather proof FRP cabinet for all equipments/ Isolators/ ICT's and Reactors.

Outdoor 433V AC Distribution Cubic with 10Nos, 32A MCB's with weather proof FRP cabinet for bkr.

Supply and fixing of Hylem board 8/10 mm thick wherever required as directed by the field engineer.

Supply and fixing Fuse unit of reputed make with ISI as directed by the field engineer including drilling & fixing.

HRC Backlite Fuse units

Porcelain rewirable fuse unit

Supply and fixing of HRC fuse of reputed make as directed by the field engineer.

Supply and fixing of MCB of Havells/ Schneider/ MDS/ Reputed make with ISI mark wherever required as directed by the field engineer.

32 AMPS - 3 phase, 4 pole

63 AMPS - 3 phase, 4 pole

16 AMPS - single phase, single pole

Supply and fixing of Terminal blocks as directed by the field engineer.

Regular type (Non-disconnecting)

Disconnecting type (Link type)

Communication Equipments

8command Digital Protection Coupler (Including Remote end stations).

Hybrid Optic Line Terminal equipment (OLTE) with STM 16/4/1 optical interface cards and 1G/10G MPLS - TP optical/ electrical interface cards with integrated cross connect Multiplexers.

EPAX for PLCC system for 48Subscripers and 16Trunks (48S/16T)

Telephone Cable (4 Pair - 14Nos, each with 500 Mtrs.)

Telephone for CC

Commissioning of SAS

Power Connectors Supply of Aluminium Power Connectors/ Clamps/ Fittings with SS Bolts and Nuts, including frieght etc., confirming to IS as per the drawing and specification.

Double Tension String assembly with strain clamp for Twin Zebra ACSR 225mm Spacing with 6-bolted tension fitting

Double Tension String assembly with strain clamp for Single Zebra ACSR with 6-bolted tension fitting

Bolted Type Suspension fitting for 230kV Twin Zebra

Bolted Type Suspension fitting for 110kV Twin Zebra

Switch End Clamp for Zebra

Switch End Clamp for Twin Zebra

Switch End Clamp for 75 mm bus bar

Switch End Clamp for 50 mm bus bar

Switch End Clamp for mink

Corona Bell for 50mm Bus Bar

Corona Bell for 75mm Bus Bar

Free end Clamp for 75mm Bus Bar

Free end Clamp for 50mm Bus Bar

Joint Clamp for 75mm Bus Bar

PG Clamp for Zebra

Reducer Clamp for 75 mm Bus to Zebra

Reducer Clamp for 50 mm Bus to Zebra

Seating Block for 75mm Busbar

Spacer Clamp for Twin Zebra with 225mm Spacing

T Clamp for 50mm bus to Zebra

T Clamp for Double Zebra to 75 mm Bus

T Clamp for Single Zebra to 75 mm Bus

T Clamp for Twin Zebra to Twin Zebra

T Clamp for Twin Zebra to Single Zebra

T clamp for Zebra to Zebra (C Type fired boltless wedge connector )

Aluminium 'C' Type wedge connectors Zebra to Zebra

Yard Lighting Materials

Supply and erection of Yard light pole 5.5mtr. Grounting type, stepped tubular pole with Double Bracket with one coat of redoxide and aluminium paint

Supply & Erection of yard light fuse unit mounting box of size 200x200x150mm (BxHxD) out of 18 SWG (1.22mm) M.S Sheet including primer paint as per Drawing including the Supply, Fabrication and Erection of Box fixing Flat using 50x8MSF, Two coat of enamel paints, provided with 16/20A rewirable Porcelain Fuse carrier unit, 16A Bakelite connectors including its cost materials, consumables, frieght, etc and as directed by the field engineer on site requirements. (The box shall be vermin proof, shall be provided with sturdy hinges, with provision for cable entry and locking arangements).

Supply and erection of Compact make street light fitting with 150W, 240V CGL/PHILIPS or reputed make LED Lamp.

Supply and Erection of switch yard Lighting & Lightning Master (LLM) as per specification and design including all materials and consumables using LED technology for arriving lux 30 for 230kV SS AIS

Fire Extinguishers

Mechanical foam type fire extinguisher trolly mounted 60 Ltrs capacity with complete set with hose and air induction nozzle and all accessories strictly confirming to latest issue of IS 13386/1992 with ISI certification

Mechanical foam type portable 9ltrs capacity fire extinguisher with initial charge complete with chromium plated GI Cap, High pressure nylon braided discharge hose, nozzle and all accessories strictly confirming to latest issue of IS 10204/2001 with ISI certification

Dry chemical Power Cylindrical shape fire extinguisher with initial charge complete with rubber or braided hose dry powder level indicator and all accessories strictly confirming to the latest issue of IS specified with ISI certification Fire extinguisher DCP type trolley mounted 25KG capacity with accessories

Dry chemical Power Cylindrical shape fire extinguisher with initial charge complete with rubber or braided hose dry powder level indicator and all accessories strictly confirming to the latest issue of IS specified with ISI certification Fire extinguisher DCP type Portable 9KG capacity

Dry chemical Power Cylindrical shape fire extinguisher with initial charge complete with rubber or braided hose dry powder level indicator and all accessories strictly confirming to the latest issue of IS specified with ISI certification Fire extinguisher DCP type Portable 6KG capacity

Manufacturing and supply of Fire bucket of 10 litre capacity made out of 26(0.46) SWG MS Sheet painted with white & red enamel paint inside & outside respectively : bottom of bucket shall be U shaped outside of the bucket shall be written as Fire in English & tamil in white enamel paint, including cost of all materials

Manufacturing and supply of sand drum made out of size 580mm dia and 420 mm height with conical cover made out of tin sheet provided with handle including the cost of barrel, sand and consumables as directed by the field engineer

Fire stand suitable to Battery Room

Supply and erection of Fire protection alarm system for Main control room building, Cable gallery with smoke detectors and wherever necessary

Fire fighting equipments Display Boards and first aid safety chart boards as required.

First Aid Box and Artificial Respiration kit as required.

Scientific Instruments

Industrial grade True RMS Digital Multimeter (AC/DC)

Digital Mini clamp meter (for mA current measurement range 20mA - 200mA - 2 - 20A) with all standard accessories, functions and features enabled

Handheld Digital clamp meter (True RMS AC/DC currents upto 2000 A)

1kV Analog Megger (Hand Operated)

5kV Digital Insulation Tester

Digital Earth resistance clamp on meter

On Line Earth Tester (Auto Earth tester)

Thermo vision camera with accessories

Automatic Battery Discharge kit

Transformer Oil BDV kit

Ferruling Machine with all standard accessories, functions and features enabled

DFR (digital fault recorder) system with PMU (phasor measurement unit) complete (2Dia for this SS and 1 Dia for Samugarengapuram end)

Work station for Distance Fault Recorder (1No for this SS and 1No for Samugarengapuram end)

Tong Tester (200 mA-20 Amps-200 Amps)

Tong Tester (Upto 2000 Amps) AC

Primary Injection Kit (2000 Amps Continuous)

Station Auxilliaries

Electrical Insulation Anti skid Rubber mat 2000*1000*10mm

Supply and fixing of godrej 6 lever navtol lock with triplicate keys for A.B.Switches and for any other purpose including the cost of ring and key token as directed by the field engineer.

GI Ladder type Cable Tray 2.5m L, 0.3m W and 2mm thickness with coupling plate and bolt nuts

GI Ladder type Cable Tray 2.5m L, 0.45m W and 2mm thickness with coupling plate and bolt nuts

GI Ladder type Cable Tray 2.5m L, 0.60m W and 2mm thickness with coupling plate and bolt nuts

Red oxide Paint of reputed make for painting of all Earth Raisers and MS materials

Aluminium Paint wherever necessary

Anti Corrossive black paint of reputed make for painting of all joints in Earth Raiser connections and Earth mats

Enamel Paint of reputed make of various colours for colour coding painting of Bottom of all structures, equipments and name boards as per field requirement

Reflector sticker of reputed make for colour coding of all equipments and structures

T&P Furniture

PC & Software

Aerial Hydraulic scissor Man Lift Ladder of 15m Height

30feet Aluminium alloy trolley tiltable tower extension ladder

Aluminium self supporting Ladder 10 feet Length

Discharge rod made of hard PVC, copper flat and 6sq.mm cable

Earth Rod made of hard PVC, copper flat and 6sq.mm cable

Rubber gloves as per IS standard

Rubber gauntlets as per IS standard

Rechargeable high beam torch light as per standard

Digital clock for GPS Time calibration

Portable Emergency Lamp - Rechargable Type

Emergency lamp wall mounted with Battery backup

LED Bulb (20Watts of Higher) for emergency lighting of Control Room

3KVA, UPS for emergency lighting of control room

Supply of Wedge clamp fixing & releasing Kit with accessories

Tools Kit complete (DE Spanner, Ring Spanner, Cutting plier, hammer set etc.,)

Supply and erection of Visual monitoring system for monitoring complete switchyard and control room for day and night for monitoring of the entire switch yard area and for security purpose.

Supply and fixing of LC/ Key Board/ Earth Mat & Earth Electrode layout of size 3000 X 1500mm out of 75X25mm Alu. Frame embedded with 12mm pre laminated wood particle board using screw on rear 2Nos plain class of 5mm thick fixed with metal roller moving on Aluminium Channel with on front with locking arrangement LG class piece should be fastended on the glass shutters for opening and closing wall clamp made out of 6mm MS plate should be provided on as per drawing along with hook for key with token and as directed by the field engineer including cost of all materials.

Supply & Erection of Identification board for all equipments, earth pits, slogan, danger boards etc.,

Supply of Solar Panels on top of Control room

Description of Work / Item(s)

Amount

Transformers

Labour charges for erection of 100 MVA, 3 phase, 50Hz, 230/110KV YNaod11 Auto Transformer with RTCC Panel and all accessories, Terminal connectors and clamps and with Neutral CT for enabling REF protection and using PLC to control Fans, Pumps and OLTC with RTCC and must be compatible with the SAS System equipments for Nitrogen Injection Fire Protection Systems including FRLS cables, accessories, Heat Sensor for Fire Detectors Spare Nitrogen Cylinder Regulator Assembly.

Labour charges for erection of 11kV/433V, 250KVA Station transformer (including structure) with 4way FRP pillar box and with suitably rated SCADA ready RMU (RRLL configuration) with FRTU including suitably rated HT cable between RMU to station transformer and termination kit and LT supply cable, accessories and arrangements, FO communication cable with necessary media converters for integrating FRTU in RMU with SAS.

Erection, Testing and commissioning of 250kVA, 433V, 3 phase diesel Generator set with all accessories, battery, exhaust pipes with suitable thermal insulation, panel, power cables & all consumables.

Circuit Breakers

Labour charges for erection of 245kV, 2000A, 50KA, SF6 Circiut Breaker 220V DC Control with all accessories, with Terminal connectors and clamps including mounting structure G.I.Bolt and standing ladder arrangements.

Labour charges for erection of 145kV, 2000A, 40KA, SF6 Circiut Breaker 220V DC Control with all accessories, with Terminal connectors and clamps including mounting structure G.I.Bolt and standing ladder arrangements.

Measurement Transformers

Labour charges for erection of 245kV, Single phase Outdoor Current Transformer, Potential Transformer with Terminal Connectors and clamps. G.I.support Structure, Hot Dip Galvanising Steel Bolt (1No. Junction Box for 3Nos Measurement Transformers)

Labour charges for erection of 145kV, Single phase Outdoor Current Transformer, Potential Transformer with Terminal Connectors and clamps. G.I.support Structure, Hot Dip Galvanising Steel Bolt (1No. Junction Box for 3Nos Measurement Transformers)

Lightning Arrestor

Labour charges for erection of 216kV, 10KA Station Type Lightning Arrestor with surge Monitor, Terminal connectors and clamps and all accessories G.I.Support Structure Hot Dip Galvanising Steel Bolt

Labour charges for erection of 96kV, 10KA Station Type Lightning Arrestor with surge Monitor, Terminal connectors and clamps and all accessories G.I.Support Structure Hot Dip Galvanising Steel Bolt

Isolators

Labour charges for erection of 245kV, 2000 A, 50 KA, Horizontal Centre Rotating Double Break with Single earth switch- 440 V AC Motor operated with 220 V DC Control, 1No MOMD for Main Blade and 1No MOMD for earth switch in the elevated tower Structure with Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

Labour charges for erection of 245kV, 2000 A, 50 KA, Horizontal Centre Rotating Double Break without earth switch- 440 V AC Motor operated with 220 V DC Control, 1No MOMD for Main Blade in the elevated tower Structure with Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

Labour charges for erection of 245kV, 2000A, 50KA, Horizontal Centre Rotating Double Break without earth switch- 440 V AC Motor operated with 220 V DC Control, 1No MOMD for Main Blade with G.I.Support Mounting Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

Labour charges for erection of 145kV, 2000 A, 40 KA, Horizontal Centre Rotating Double Break with Single earth switch- 440 V AC Motor operated with 220 V DC Control, 1No MOMD for Main Blade and 1No MOMD for earth switch including G.I.Support Structure, Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

Labour charges for erection of 145kV, 2000 A, 40 KA, Horizontal Centre Rotating Double Break with out earth switch- 440 V AC Motor operated with 220 V DC Control, 1No MOMD for Main Blade including G.I.Support Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

Labour charges for hot dip galvanising of mild steel materials including transport, lead, lift,etc., complete wherver required as directed by field engineer

Labour, machinery consumables for the Fabrication of steel structures

Heavy section (14kg/m and above)

Light section (below 14 kg/m)

Labour for the Erection of Fabricated steel structures

Heavy section (14kg/m and above)

Light section (below 14kg/m)

Earthing

Labour, machinery, consumables for fabrication, erection of earthmat, earth connection, earth electrode, earthspike (including sharpening of earth spike) including labour for excavating and refilling of earth/ trench for earthmat, cable, etc., of any size/ depth narrow excavation as directed by the field engineer.

Providing Earth bore 140/150 mm dia using power rig or 100/125 mm dia using hand bore set including the labour, lead, lift etc., sedimentary strata of clay & sand stone shale pebbles boulders etc., for earth Pits with supply and providing of Bentonite powder (Sodium Bentonite) 5Kg/ Mtr depth of the bore mixed with low resistivity earth as directed by the field Engineer (Earth to be supplied by the contractor)

Insulators, Conductors and Busbars

Labour for erection of 245kV, Solid core Insulator G.I.Support Structure with Hot Dip Galvanising Steel Bolt with Terminal connectors and seating clamps.

Labour for erection of 145kV, Solid core Insulator G.I.Support Structure with Hot Dip Galvanising Steel Bolt with Terminal connectors and seating clamps

Labour for the Erection of Strung bus and all related hardwares, fittings, clamps including Meggering, hoisting of insulators, and consumables and as directed by the field engineer.

230kV Single Conductor Strung Bus/phase

230kV Double Conductor Strung Bus/phase

110kV Double Conductor Strung Bus/phase

Labour for the erection of Insulator single pole stack for supports Uprights/ Underhang including Meggering & other consumables and as directed by the field engineer.

Labour for the erection of Busbar including suitable Modifications of End Clamps, providing holes wherever necessary as directed by the field engineer.

75mm (1 length)

75mm (with bend)

50mm (1 length)

Labour for the Erection of Jumper/ Droppers using Moose/ Zebra/ panther Conductors including Modification of End clamps, providing holes etc wherever necessary as directed by the field engineer.

Labour for the erection of Junction Boxes for CT, PT, CVT, LVT, AC Distribution box, Yardlight box, change over switch including fabrication of clamping arrangements as directed by the field engineer

Labour for the Erection of Control Panels including consumables as directed by the field engineer.

Simplex type/AC/DC/C&R Panel of Non-Grid type, Battery Chargers, Single feeder Control/ Relay Panels of Grid type (P&C)

Double feeder Control/ Relay of Grid type (P&C)

Labour for Erection of Battery set including two coats of painting of Acid proof paint on wooden stand and neatly stacking the Battery cells and fixing of connecting plates.

220V DC, 300AH

48V DC, 250AH

Labour, Consumables for the Initial filling and First Charging of the Battery to the required AH input and thereafter atleast 3cycles of Charge/ Discharge of the Battery set till the battery is charged to its full Capacity as directed by the field Engineer.

220V DC, 300AH

48V DC, 80AH

Installation, Testing & Commissioning of complete SAS for 230/110kV SS (Comprising 33 Electrical bays, inclusive of training by a registered agency).

Labour charges for laying of LT Alu. UG Power cable 4x25, 4x240 & 4x120 Sq.mm in duct/ trench providing Glands at both ends and termination with necessary sockets as directed by the field engineer.

Labour for laying of cable in duct/ trench/ clamping on structures - neat laying in the ducts with identification tags plastic token in all duct corners for easy identification of cables including fabrication of clamps and fixing at uniform intervals as directed by the field engineer

Up to 8 Core

Above 8 Core

Labour Charges for laying of Control/ Yardlight cable by digging cable trench of size 0.3 x 0.6m filling with for depth of 0.2m covering with one layer of country bricks and refilling with excavated earth and including cost of sand and bricks etc

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field engineer.

Termination of cable core end dressed neatly including the cost of cable socket (lug) ferrules, sleeves, tags, ties, stropes, etc., as directed by the field engineer. (No.of core ends in unit of 1000).

Erection of GI Ladder type Cable Tray of various sizes with coupling plate and bolt nuts including transporting and alignment

Erection of Armoured Fiber Optic Cable with all the accessories for connectivity between Outdoor SAS Process interface panel and control & protection panels, Digital Substation Automation System and wherever required.

Erection and commissioning of ADSS (24 fibre) cable with HDPE pipe and accessories from gandry towers to control room for feeders.

Digital Protection coupler with E1 interface (8 command type) for Muppandal 230 KV SS end - 2Nos and Remote end SS- 2Nos

EPAX - 16S/16T

Supply of paint of reputed make (i.e Asian, Dulux, Nerolec paint) and labour for first primer coat of painting using Red oxide paint including consumables after proper surface preparation using appropriate machinery to remove rust/ scales etc as directed by the field engineer

Supply & Labour charges for two coats of enamel painting in any substation structures, steels, etc and wherever required including the cost of reputed make paints and other consumables as directed by the field engineer.

Labour charges for writing details in any finished surface/ board including cost of enamel paints and other consumables as directed by the field engineer.

Supply and erection of Vinyl Sticker cutting/ Printing on Vinyl Sticker/ Foam board to be used for main equipment, slogan, name board & any other purpose of required sizes as directed by the field engineer.

Supply and erection of "B" class G.I.pipe for extension of tandem/ down pipe for A.B.Switches and for any other work required as directed by the field engineer.

40mm Dia

50mm Dia

Supply & Erection of Chain link fencing wire as per IS and of size 50-60mm window of 10swg as required and as directed by the field engineer

Supply and fixing of godrej 6 lever navtol lock with triplicate keys for A.B.Switches and for any other purpose including the cost of ring and key token as directed by the field engineer.

ESHSCost Schedule

Resources allocated to ESHS management

Drafting and updating the ESHS documentation, reporting, inspections

Implementation of the Health and Safety Plan: Meetings, health care centre, medical check ups, emergencies and evacuations, safety protective equipment, hygiene

Accommodation, drinking water, meals and transportation of staff(*) (*) : The Bidder shall detail the financial conditions of the supply of accommodation, meals and transport to its staff:  Accommodation  Meals  Transport

Training and local recruitment management costs

Protection of adjacent areas, biodiversity,prevention of erosion and wastewater management

Traffic, noise and atmospheric emissions management, land take

Waste and hazardous products management

Vegetation clearing and site rehabilitation

Erection of Solar Panels on top of Control room

AH POWER CONSTRUCTION PRIVATE LIMITED (BID ID -966211)

AH POWER CONSTRUCTION PRIVATE LIMITED (BID ID -966211)

AH POWER CONSTRUCTION PRIVATE LIMITED (BID ID -966211)

AH POWER CONSTRUCTION PRIVATE LIMITED (BID ID -966211)