Loading…
Loading…
Tender Value
₹5.9 L
EMD Value
₹11,900
Closing Date
13 Oct 2026, 12:00 pm5d left
O/O EXECUTIVE ENGINEER WSS DIV NO. 1 JALANDHAR
O/O EXECUTIVE ENGINEER WSS DIV NO. 1 JALANDHAR
Balance Work for Augmentation Village Tajpur Block Jalandhar East DisttJalandhar Under 15th Finance Commission
2026_WSS_176797_1
Tajpur- 15FC-2026
Open Tender
Civil Works
Percentage
120 days
Tajpur
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
₹11,900
5 Oct 2026
5 Oct 2026
13 Oct 2026
5 Oct 2026
13 Oct 2026
5 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing Strining out PVC pipes 6Kgf Cm2 ISI marked as per ISI-4985 the tranches and laying the same in tranches to correct alignment and gradients , cutting, jointing & testing complete as per specifications for less than 3 mtr. Street width Complete in all respect. Specifications for Manually Excavation including speicals (6kgf/ cm2) Pressure | - | - | - | - |
| 2 | PVC pipe 63 mm o/d (6kgf/ cm2) Pressure | 414 | Mtr | 214 | ₹88,596 |
| 3 | PVC pipe 90 mm o/d (6kgf/ cm2) Pressure | 330 | Mtr | 325 | ₹1,07,250 |
| 4 | Dismantling of cement concrete 80mm thick cement concrete 1:2:4 over 100mm thick C.C. 1:8:16 and making good the same to its original condition complete in all respects. | 414 | Mtr | 530 | ₹2,19,420 |
| 5 | Connection With Existing PVC Pipe including cost of PVC Tee and PVC Saddle Piece and Earth work in excvation & Back Filling complete in all respects. | 5 | Each | 1,920 | ₹9,600 |
| 6 | Dismantling and refixing of 80 mm interlock tiles and making its original condition complete in all respect. | 330 | sqm | 211 | ₹69,630 |
| 7 | Providing proposed water connection to house hold up to wall with providing, laying jointing testing GI pipe lines 15mm i/d = 2.50 mtr, B-Class as per CSR 28.36 (A), (Above GL), Providing & fixing MDPE pipe 15 mm i/d with specials 2.00 mtr (Below GL) including cost of specials such as tees, bends, sockets, elbow, etc. cutting, threading and testing in trenches in the ground and ISI 15 mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with C.I bib cock, 15 mm i/d as per IS: 210 with stainless steel spindle of approved make. | 61 | Nos | 1,630 | ₹99,430 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.50 MB
Tendernotice01.pdf
Additional Documents • 0.48 MB
DNIT01.pdf
Tender Documents • 1.85 MB
BOQ_360345.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .