8362 REPAIR / REPLACEMENT OF JOINERIES, PANELLING, FALSE CEILING AND OTHER CONNECTED WORK RELATED TO HOSPITAL BLDG UNDER AGE BR III SOUTH PUNE

Amount

Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) for metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and as directed.

S&F 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 4mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as spd and as directed.

S&F 6mm thick toughened glass as in hinged doors, partitions, automatic doors structural glazing and similar work including cutting to shape, drilling holes complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking out shuuters from the frame) exc 1.5 sqm and not exc 4.00 sqm each including hold fasts and removing the same from site all complete as directed.

Taking down chowkat or frame with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm inch hold fast and removing the same from the site all as spd and as directed.

Taking down shutters of any description exc 1 sqm but not exc 2 sqm each and removing to store complete all as specified and as directed.

S&F of Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions frames (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, etc. complete all as specified and as directed.

S&F of Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws etc. complete all as specified and as directed by Engr-in-Charge.

S&F of anodised aluminium Deco grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing around the opening, all complete as per requirement and direction of Engineer-in-charge

Supply and Fix in repair following Accessories of Auto sliding doors of OTs in New Command Hospital for efficient and effective performance of the doors complete all as specified & directed by Engineer-in-Charge and as per Manufacturer's Instructions :- (Make :- WIESPL Pune)

Power supply adapter (24v) dc,

Sealing gasket grey mf5 (06 Pcs Set)

Bottom sealing gasket grey mf5 (1.6 Mtr) long

Parfix-3401

Tooth belt 10mm for mak health (5.5Mtr) long

Pulley for dc motor

Runner wheel mf5 complete

Bottom guiders set mak health

Controller sda-04 dcb

Battery (12v, 2.2AH)(06 Pcs Set)

S&F of 25mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber/aluminium frame work complete all as specified and as directed.

S&F powder coated 100mm butt hinges, medium weight, cold rolled mild steel, and fixed complete all as spd & directed.

S&F powder coated 300mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F in repair of powder coated 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F powder coated 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F of powder coated 150mm size aluminium handles, fabricated type, anodised and fixed complete all as specified and as directed.

S&F in repairs of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as spd and as directed.

S&F in repair door closer hydraulically regulated, design No. 2,universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as spd and as directed.

S&F in repair powder coated 100mm butt hinges, medium weight, cold rolled mild steel, and fixed complete all as spd & directed.

S&F in repair powder coated 200mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as spd and as directed.

S&F in repair powder coated 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as spd and as directed.

S&F in repair powder coated 150mm size aluminium handles, fabricated type, anodised and fixed complete all as spd and as directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet with single side prelam PVC sheet used in stead of plain colour PVC sheet & edgs will be painted to match with prelam sheet. reinforced with 19x19mm MS square tube and 1.2mm wall thickness complete all as specified and as directed.

S&F of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges PVC ‘C’ channel having a PVC sheet strip of 20mm widthtuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F of 100mm long stainless steel butt hinges, medium weight and fixed complete all as spd and as directed.

S&F aluminium, anodised, barrel tower bolts of extruded section and fixed, 150mm long complete all as specified and as directed.

S&F in repairs of 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S&F teak wood lipping 6mm thick around 18/19mm veneered particle board complete all as specified and as directed.

M&L for plain fillets 2nd class hardwood. square, rectangular or triangular in section, exc 3.0 & not exc 6.0 sqcm clean sawn, secured with nails or brads complete all as specified and as directed.

S&F in repair 150mm Floor door stopper of aluminium alloy body and tongue, powder coated with hard drawn steel spring, fixed in floor all as spd and as directed.

S&F in repair 150mm Floor door stopper of brass body CP and hard drawn steel spring with hard drawn steel spring, fixed in floor all as spd and as directed.

S&F in repair of brass Locks 4 levers, cupboard, grade I, size 50mm complete all as specified and as directed.

S&F of brass Locks 4 levers, cupboard,grade I, size 50mm complete all as specified and as directed.

S&F in repair of 150mm Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.

S&F in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps 30mm (when open) complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F Seamless calcium silicate ceiling made out of 1800 x 1200 mm size, 8mm thick board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified and as directed. (Note :- Frame work for ceiling shall be measured and paid separately)

S&F exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre of size 595mm X 595mm grid complete all as specified and as directed. (Note :- Frame work for ceiling shall be measured and paid separately)

M&L for 3mm thick Aluminium Composite Panel (ACP) exterior grade (skin thickness 0.25mm) including aluminium anodised frame work of AA 300/5000 series with one core of material of virgin LDPE and coating of kynar 500 resin based PVDF coating (mettallic colour) with joint filling silicon weather proofing of any colour complete all as specified and as directed.

S&F GI powder coated ceiling of size (600mm X 600mm) snap grid frame work for false ceiling with powder coated steel angle 24mm X 24mm fixed to wall, main 'T' with powder coated steel at bottom of size 24mm X 38mm X 3.6m long, Cross 'T' with powder coated steel at bottom of size 24mm X 38mm X 1.2m long and cross 'T' of size 24mm X 38mm X 0.6m long to form a grid of 600mm X 600mm suspended with 4mm dia GI wire at 1200mm c/c including all fittings and fixtures complete all as specified and as directed

S&F Gl powder coated frame work for seamless / snap grid ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having curled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

M&L in repair of 12mm thick calcium silicate Perforated fiber board/ tiles for insulation and accoustic purposes, 60X60cm in size, fixed with nails to timber framework or with staples on snap grid complete all as specified and as directed.

Dismantling structural steel work including doors, gates , framed truss etc. complete and refixing in the same opening after adjusting or easing including replacing pintle hinges, locking devices etc all as specified and as directed with one coat of synthetic enamel paint complete all as spd and as directed.

M&L for mild steel miscellaneous work as in framed work such as barred iron doors, gate etc including pin type hinges, handmade sliding bolt etc with and including hanging complete all as specified & as directed.

M&L for preparating of new steel surfaces and applying two coats of synthetic enamel paint 1st quality over a coat of red oxide primer on steel surfaces exc.10cm width or girth all as specified and as directed.

S&F in repairs fancy type MS curtain rods powder coated 25,, dia with end fittings and fixing brackets of required size (two Nos end brackets and two Nos wall brackets) fixed with wooden gutties and screws ventieal blinds complete all as spd and as directed.

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc. complete all as specified & as directed.

M&L for plastering in cement mortar (1:6), 10 mm thick on brick /surfaces of other than fair face even and smooth without using extra cement complete all as specified & as directed.

M&L for two coats of plastic emulsion paint over a coat of primer incl. two coats of wall care putty complete all as specified and as directed.

Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for.

M&L for 20mm thick polished granite (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10mm thick screed bed in CM 1:3 complete all complete all as specified and as directed.

M&L for 22 to 25mm thick mirror polished kota stone of size 600x600mm over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

S&F Providing precast cement concrete louvres and jallies Type B0,1:2:4 (12.5mm graded graded aggregate) set in CM 1:4, 40mm thick (measured solid), including all mouldings but excluding frame complete all as specified & as directed. (Note :- Precast frame shall be measured separately)

M & L for precast concrete interlocking paver blocks glossy finish with approved shape and size conforming to IS-15658-2006, 60mm thick, M-30 grade with grey cement and pigment laid over & including 75mm thick stone dust/grit complete all as specified and as directed.

M&L for Cement concrete 1:3:6 type C2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as spd and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 25 mm thick color PCC chequered tiles of size 300x300mm in terracotta colour set, jointed & pointed with neat cement slurry mixed with colour laid over cement screed over with grey pigment cement & pigment in floors over 20mm thick screed bed in CM 1:6 complete all as spd and as directed.

M&L for non - skid Ceramic colored tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed bed in CM 1:6 complete all as spd and as directed.

M&L for coloured glazed ceramic tiles in vertical surface 200x 300x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick plaster in CM 1:4 complete all as spd and as directed.

M&L for compressed vitrified tiles of size 605x605x10 mm thk of grade 5 with rectified edges with border tiles of group 25 vc shield tile with matt finish, high abrassion, stain free and scratch proof over cement screed over over 20mm thick screed bed in CM 1:6 complete all as spd and as directed.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repair of horizontal Venetian Blinds of powder coated Aluminum strips or equivalent of approved shade including necessary accessories complete all as specified and as directed.

S&F in repair heavy Duty Aluminium cubicle curtain track size 20mm wide x 30mm high, made of aluminium anodized of 15 microns complete with continuous PVC liner, nylon gliders and hooks, plastic end cap, connecting bridge, overlapping joint connector, wall brackets with matching screws to make up cubicle height to 2100mm clearance from floor level at 1000mm spacing and securely fixed to above slab all strictly in accordance with the manufacturer's instruction complete all as specified & as directed.

M&L for french polishing on old surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with one or more coats all as spd and as directed.

M&L for Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

M/s.BAJRANG CONSTRUCTION