SPECIAL REPAIR TO DRAINAGE SYSTEM AND CERTAIN REVENUE WORKS OF B/R NATURE AT BASOLI UNDER GE BASOLI

Amount

Excavation in trenches not .exceeding 1.5m wide and not exceeding1.5m in depth and getting out in any type of soil, complete all as specified and directed .

Removing excavated material n exc. 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc.25 cm complete all as specified and directed .

Material and labour for PCC 1:4:8 type D-2 using 40 mm graded stone agg as in foundation filling and mass concrete complete all as specified and directed

Material and labour for Walling of Random rubble stone masonary brought to course well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed.

All as per item No 05 above but except stone

Material and labour for Brick work with old size sub class "B" bricks straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Extra over stone walling, built with sand stone for hammer dressing of face stone and dressing of face bed with joint with maximum depression 40mm on face from straight edge held against the dressed surface complete all as specified and directed.

Material and labour for plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in drains or surface channels finished even and fair complete, all as specified and directed.

Extra for fair finished drain or channel 30cm inner girth in cement concrete using extra cement incluing forms, moulds, mitered/stopped ends etc complete all as specified and directed.

Demolition of brick work or stone boulder masonary built in cement mortar incl all quoins, arches, pillasters etc, complete all as specified and directed.

Material and labour for 15mm thick rendering on fair faces of brick wall or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 15mm thick rendering, on other than fair faces of brick work in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 5mm thick rendering, on fair faces of brick work or concrete surface in cement mortar 1:3, finished even and smooth without using extra cement as in ceiling, complete all as specified and directed .

Material and labour for Raised pointing in cement mortar 1:4 to random rubble stone masonary complete all as specified and directed.

Material and labour for M-20 (Nominal mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and stair case slab, in shelves, parapets, railing and like(using 20 mm graded crushed stone aggregate) complete all as specified and directed .

Form work to edges of concrete flats, breaks in floors, openings in concrete walls,floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work all exceeding 10 cm wide but not exceeding 20cm for rough finished flat surfaces of concrete complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slabs, floor slabs etc not exceeding 200mm thick complete all as specified and directed.

Material and Labour for TMT Mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

Material and Labour for TMT mild steelbars 8mm dia and over upto and including 10mm dia as in stirrups, spacers, binders, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

Material and labour for Steel window factory made double shutter and tubular moulded frame of 16 gauge suitable for double shutter as per drg No CEPZ/TD/245/01 sheet 1/1 and CEPZ/TD/246/01 sheet 1/2 (double for mosquito proof one glazed with glazing bars and one gauged without glazing bars ) with side hung shutters including projecting type hinges non friction with 3mm thick 100mm long handle and two Nos tower bolts 100mm long welded on 3.0mm thick MS plate to each window shutter and including hold fast and painting with one shop coat of zinc chrome primer complete all as specified and directed.

Supply and fix for Sheet glass, ordinary quality 3 mm thick and glazing with oil putty in squares n exc 0.5 sq m in each pane complete all as specified and directed.

Supply and fix for pressed steel frames for doors of size 125 x 60 mm, with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , including one shop coat of red oxide, zinc chrome primer and filling of PCC 1:3:6 type C-1 in back of chowkats complete all as specified and directed

Material and labour for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated , complete all as specified and directed.

Supply and fix for Mild steel barrel tower bolts of stove enamelled black, with bright bolt of size 150mm. complete all as specified and directed.

Supply and fix for Mild steel sliding door bolts of size 250mm long with hasp, staples and fixing clips of sheet extruded section and fixing bolts of extruded section. complete all as specified and directed.

Material and Labour for 40mm thick Cement Concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate) as in floor finished even and smooth w/o using extra cement etc., complete all as specified and as directed.

Supply only glass dividing strips 3mm thick complete all as specified and as directed.

Material and Labour for preparation of new plastered surfaces and applying Two coats cement base paint over a coat of primer on walls complete all as specified and directed

Material and labour for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and Labour for preparation of new plastered surfaces and applying two coats of dry distemper over a coat of chalk whiting complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces and applying three coats of white washing on ceiling complete all as specified.

Material and labour for Preparation of new wooden or wood based surfaces of any description not exceeding 10 cms width or girth when unconnected with other painting or when painted in different tint and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

Supply and fixmild steel pressed handle oval type stove enamelled black of size 125mm complete all as directed by Engr-in-charge.

Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rouinded for chamfered angles and throating, as directing complete all as specified and directed .

M&L for providing 75mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling asbestos cement (Corrugated, Semi corrugated, etc,) sheets in roof covering complete all as specified and directed .

Supply and fix for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding/Eaves board to wall, fixed with self tapping screws including dismantling of asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.

Supply and fix for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings. complete all as specified and directed.

M/S YASH PAUL RAINA AND CO

Standard engineers