SPECIAL REPAIR TO ROAD FROM BACKERY POINT TO WKSP T JUNCTION AND PANIPAT 500M UNDER GE AWC MHOW

Amount

Scrifying or picking up gravelled,macadam or bituminous macadam surface in area not exceeding 400 Sqm and depth not exceeding 100 mm deep and removing to a distance not exceeding 50m and all removed from site etc complete all as specified and directed.

M&L for 75mm thick (compacted thickness) water bound macadam (WBM), with Granite, trap or basalt of grading 2 (63 to 40mm size), spread, rolled and consolidated with 8-10 tonne power roller to required gradient and camber complete all as specified and directed.

M&L for preparing surfaces of WBM surface with wire brushes for removing caked mud etc and sweeping with brooms and finally fanning to clean the surfaces with gunny bags to remove all loose dirt etc and applying evenly a tack coat with bitumenous primer using paving bitumen VG-30 at the rate of 10 kg / 10 sqm over WBM surfaces and M&L for premixed hot mix Asphaltic Semi Dence Concrete using 5.5% binder content (VG-30 Grade paving bitumen) by weight of total mix and with thickness of 30 mm (consolidated Thickness) including rolling with 8 to 10 tonne power road roller to uniform and smooth surface and consolidation to required gradient and camber all as specified and directed. (Note: - (i) Laying shall be done by means of self-propelled mechanical paver, finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing. (ii) Mix shall be obtained from hot mix plant and spreading shell be done by using mechanical paver only)

M&L for preparing surfaces of existing black top surface with wire brushes for removing caked mud etc and sweeping with brooms and finally fanning to clean the surfaces with gunny bags to remove all loose dirt etc and applying evenly a tack coat with bitumenous primer using paving bitumen VG-30 at the rate of 05 kg / 10 sqm over WBM surfaces and M&L for premixed hot mix Asphaltic Semi Dence Concrete using 5.5% binder content (VG-30 Grade paving bitumen) by weight of total mix and with thickness of 30 mm (consolidated Thickness) including rolling with 8 to 10 tonne power road roller to uniform and smooth surface and consolidation to required gradient and camber all as specified and directed. (Note: - (i) Laying shall be done by means of self-propelled mechanical paver, finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing. (ii) Mix shall be obtained from hot mix plant and spreading shell be done by using mechanical paver only)

M&L for premix bituminous macadam (consolidated thickness not more than 75 mm) with 4% binder content of paving bitumen of grade (VG-30) by weight of total mix laid and rolled with 8-10 tonne power roller to required gradient and camber up to outer edges of roads on existing black top surfaces complete all as specified and directed. NOTE: - (i) Cost of testing charges, materials and transportations etc for job mix formula shall be inclusive in the unit rate and no extra payment shall be admissible on this account. (ii) Mix shall be obtained from hot mix plant and spreading shall be done by using mechanical paver only.

Material and labour for repair to pot holes not exceeding 1 Sqm area including sweeping free from dust and mud, water scoring sunken surface in roads, paths etc cutting around edges to at least 25 mm in depth, making good by filling screened and graded road metal watering and well ramming ( including supply of road metal) and making good by applying tack coat @ 10Kg/10Sqm of VG-30 grade paving bituminous binder complete all as specified and directed.

M&L for 100mm thick moorum/ red bajri filling under foundation or pavings laid in layers spread, rolled and consolidation to gradient and camber required including watering complete all as specified and directed.

M&L for marking lines, dashes, arrows, letter etc 15 com wide on bituminous surface with retro reflective thermoplastic road marking paint with reflector sing glass beads @ 250 gms per sqm area conferming to MOST & BIS specification ,of thickness 2.50 to 3.00 mm thick of white/golden/yellow as approved colour/shade and applied with machine as per manufactures instruction including preparation of surface ie cleaning of surface by removing all dust ,dirt,oil grease etc complete all as specified and directed

Supply and fixing in repair CAT Eyes as (Road Stud) 120mm x 90 mm size made of poly carbonate moulded body with electro nically welded prismatic retro range on both sides of maximum retro reflection in wet and dry condition to be fixed with bituminous adhesive BT-69 including removal of existing cat eyes of any description complete all as specified and directed. (Make - 3M/Sun Eyes/Dark Eye)

S&F super delux quality solar stud of Aluminium body including solar- powered by monocrystal solar panel. One high capacity Ni-Cd rechargable battery Approximate 1000 mtrs LEDs- 010mm, 3 pieces each side and total 6 pieces are used for high brightness of different colours back up- 12 hours of comtinous lightening at night. Make - SUNEYES/ Dark Eye / 3M/Alcolite/solar ) complete all as specified & directed.

Demolition cement concrete (unreinfoced) in ground floor and paving n. Exc. 15cm thickness (below or above ground level) complete all as specified & directed.

M&L 80 mm thick Machine Pressed Precast concrete interlocking Paver block glossy finish any shape and size as approved by GE confirming to IS 15656 2006, M-40 grade with grey cement and pigment dry & joints filled over and including 30mm thick fine sand cushioning complete all as specified and directed.

M & L for PCC (1:4:8), type D-2, using 40mm graded stone aggregate in foundation mass concrete and filling any other location complete all as specified and directed.

Demolition of brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L Brickwork with modular sub class 'B' bricks, straight or curved on plan exceeding 6 M mean radius in built in cement and sand mortar 1:6 complete all as specified.

M&L for 10mm thick rendering in cement mortar (1:4) on fair faces of brick walls or concrete surface 15mm thick), mixes with water proofing compound in top layer by weight of cement or as per manufacture instructions, finished even 7 fair without using extra cement all complete all as specified and as directed.

Narayandas Phoolchand Mishra Infrastructures Pvt. Ltd.

Bharadwaj Builders

ram prashad chotelal batham

KAILASH CHANDRA KHANDELWAL