Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.0 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹4.1 L+₹11,010 (2.77%)Admitted-Finance HIMACHAL PRADESH HP | HAMIRPUR | HIMACHAL PRADESH | 174304 | L2 | Admitted-Finance | |
| 3 | L3₹4.2 L+₹22,020 (5.55%)Admitted-Finance | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Vijay Kumar L2 | Shashi Kumar L3 | Monika Chandel L1 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation, trenches etc. in all kinds of soil such as pick work jumper work, blasting work in soft/hard rock, chiselling in soft/hard rock including wedging out upto all lift, stacking the excavated soil upto all lead clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths, sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth by the Engineer In Charge in all leads and lifts PJ 50% each | 273 | Cum | 460 ₹1,25,580 | 470 ₹1,28,310 | 450 ₹1,22,850 Lowest |
| 2.00Laying, jointing and testing of GMS pipe Medium class of folowing dia (exclding cost of earth work) complete in all respact as per entire satisfaction of Engineer in charge | ||||||
| 2.01 | 80 mm dia Medium Class | 700 | Rmt | 110 ₹77,000 | 120 ₹84,000 | 100 ₹70,000 Lowest |
| 3.00Providing welding & fixing of M.S. Flange i.e. 5% of total joints confirming to IS. 6392-1971 (Latest with upto date amendments) of following tables w›th GMS Tubes in two layers on both Faces to make the joint leak proof (the cost of providing and laying of G.I. pipe to bemeasured and paid for separately). The welding of flanges should confirm to IS 816-1965 with electrodes as per IS: 814:1967 andrequired number of nuts and bolts Confirming to IS:1364. The thickness of gasket not less than 3.00 mm confirming to IS:2712-1965. The work shall be done as per entire satisfaction of Engineer-in-Charge with in all leads and lifts. | ||||||
| 3.01 | M.S Flanges 80 mm dia table-5 | 8 | Joint | 3,010 ₹24,080 | 3,020 ₹24,160 | 3,000 ₹24,000 Lowest |
| 4.00Providing circumferencial Butt welded joints by electrical arc welding to GI Pipes medium/Heavy class, welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 specifications, by using welding electrodes of 2.5mm to 6.3mm of Advani Oerlikon (Adore)- CITOJET/ESAB make, conforming to IS 814-1991, at site of work complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-in-Charge. | ||||||
| 4.01 | 80 mm dia | 120 | Joint | 1,510 ₹1,81,200 | 1,520 ₹1,82,400 | 1,500 ₹1,80,000 Lowest |
Tender Value
₹2.3 L
EMD Value
₹4,601
Closing Date
16 Dec 2025, 5:00 pmClosed
Executive Engineer Jal Shakti Division Bhoranj
Executive Engineer Jal Shakti Division Bhoranj
Dismantling of existing Rising Main 80 mm dia at various RD,s and Laying of New rising main 80 mm dia MC at various RD,s of LWSS Dhirar Paplah phase-II
2025_HPIPH_123280_1
13639-13699 dt 11-12-2025
Open Tender
Civil Works
Item Rate
120 days
Executive Engineer Jal Shakti Division Bhoranj
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
EE Bhoranj
₹4,601
20 Dec 2025
11 Dec 2025
17 Dec 2025
11 Dec 2025
16 Dec 2025
11 Dec 2025
Amount
Excavation in foundation, trenches etc. in all kinds of soil such as pick work jumper work, blasting work in soft/hard rock, chiselling in soft/hard rock including wedging out upto all lift, stacking the excavated soil upto all lead clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths, sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth by the Engineer In Charge in all leads and lifts PJ 50% each
Laying, jointing and testing of GMS pipe Medium class of folowing dia (exclding cost of earth work) complete in all respact as per entire satisfaction of Engineer in charge
80 mm dia Medium Class
Providing welding & fixing of M.S. Flange i.e. 5% of total joints confirming to IS. 6392-1971 (Latest with upto date amendments) of following tables w›th GMS Tubes in two layers on both Faces to make the joint leak proof (the cost of providing and laying of G.I. pipe to bemeasured and paid for separately). The welding of flanges should confirm to IS 816-1965 with electrodes as per IS: 814:1967 andrequired number of nuts and bolts Confirming to IS:1364. The thickness of gasket not less than 3.00 mm confirming to IS:2712-1965. The work shall be done as per entire satisfaction of Engineer-in-Charge with in all leads and lifts.
M.S Flanges 80 mm dia table-5
Providing circumferencial Butt welded joints by electrical arc welding to GI Pipes medium/Heavy class, welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 specifications, by using welding electrodes of 2.5mm to 6.3mm of Advani Oerlikon (Adore)- CITOJET/ESAB make, conforming to IS 814-1991, at site of work complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-in-Charge.
80 mm dia
Vijay Kumar (BID ID -598143)
Shashi Kumar (BID ID -598195)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.23 MB
BOQ_181108.xls
BOQ • 0.23 MB
Form6.pdf
Tender Documents • 0.36 MB
Termsandconditions.pdf
Tender Documents • 0.13 MB
PWD8.pdf
Tender Documents • 5.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .