Loading
Loading…
Loading…
Tender Value
₹4.6 Cr
EMD Value
₹9.1 L
Closing Date
27 Jul 2026, 12:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKS
13 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N=Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Important Note :- For Detail Regarding Financial Eligibility Criteria, Please visit Para No 2.2 of INSTRUCTIONS TO TENDERER & CONDITIONS OF CONTRACT of Approved Tender Document.
Technical Eligibility Criteria: The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, OR Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, OR One similar work each costing not less than the amount equal to 60% of advertised value of the tender. Note:-Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. The similar work mean having experience of the following types of works. Electrification / Rewiring of Service or Residential building / Yard / HT / LT substation work / HT / LT cable work / street lighting / platform or building lighting management / circulating area Lighting / Electrical overhead power supply work / Electrical pump work etc. Important Note:- For Detail Regarding Technical Eligibility Criteria, Please visit Para No 2.2 of INSTRUCTIONS TO TENDERER & CONDITIONS OF CONTRACT of Approved Tender Document
11 conditions · 6 needing a document upload
As mentioned in the Tender Document No. PUNE_ELECT_G_26_07
Copy of PAN Card
Copy of GST registration certificate
Tender form (First Sheet) as per Annexure-I
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
As mentioned in the Tender Document No. PUNE_ELECT_G_26_07
Tender document with Guidelines, Special conditions & Scope of work and GCC April 2022 with all advance correction slips are attached with tender
As per Railway Board Letter No. 2026/W-III/GCC/2(e-BG) (3533120) dated 16.06.2026, Indian Railways has introduced the acceptance of Electronic Bank Guarantees (e-BGs) for Earnest Money Deposit (EMD), Performance Guarantee (PG), Security Deposit (SD), Retention Money, and Advance Payment Guarantees through the integrated IREPS-NeSL platform. Accordingly, all contractors are advised to submit EMD, Performance Guarantee (PG), Security Deposit (SD), Retention Money, and Advance Payment Guarantees, wherever applicable, through the integrated IREPS-NeSL system. For detailed formats, conditions, and procedures governing the acceptance and submission of Electronic Bank Guarantees (e-BGs), bidders/contractors are advised to refer to the Railway Board's instructions and the relevant appendices/documents enclosed with the tender."
Replacement of existing over aged electrical luminaires, ceiling fans, wires, cables including other electrical assets of Pune station
PUNE_ELECT_G_26_07
PUNE_ELECT_G_26_07
Open
Works - General
18 Months
Pune, Maharashtra
₹0
₹9.1 L
27 Jul 2026
2 Jul 2026
13 Jul 2026
234 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 3,79,94,000.06 | ||
| details. | Item Breakup for | — | — | ||
| Supply and erection (including cleating on walls/trusses/pole or laid in provided trench /pipe) of 4 core 10 sqmm, AL conductor, XLPE insulated PVC sheathed armoured 1.1 KV grade cable. | — | — | — | 50,685 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection (including cleating on walls/trusses/pole or laid in provided trench /pipe) of 4 core 16 sqmm, AL conductor, XLPE insulated PVC sheathed armoured 1.1 KV grade cable. | — | — | — | 84,168 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection (including cleating on walls/trusses/pole or laid in provided trench /pipe) of 4 core 35 sqmm, AL conductor, XLPE insulated PVC sheathed armoured 1.1 KV grade cable. | — | — | — | 1,90,232 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection (including cleating on walls/trusses/pole or laid in provided trench /pipe) of 4 core 50 sqmm, AL conductor, XLPE insulated PVC sheathed armoured 1.1 KV grade cable. | — | — | — | 1,84,290 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection (including cleating on walls/trusses/pole or laid in provided trench /pipe) of 4 core 120 sqmm, AL conductor, XLPE insulated PVC sheathed armoured 1.1 KV grade cable. | — | — | — | 4,31,665 | |
| details. | Item Breakup for | — | — | ||
| Provision and erection of 2.5 to 16 sqmm LT cable end termination kit | — | — | — | 8,432.8 | |
| details. | Item Breakup for | — | — | ||
| Provision and erection of 25 to 50 sqmm LT cable end termination kit | — | — | — | 5,318.1 | |
| details. | Item Breakup for | — | — | ||
| Provision and erection of 70 to 120 sqmm LT cable end termination kit | — | — | — | 2,928.4 | |
| details. | Item Breakup for | — | — | ||
| Supply and laying of 50 mm (OD) DWC pipe with ISI mark, conforming to IS, along with necessary connecting sockets, couplings, tees of the same material, required for underground/track crossing/road crossing portion of cable laying as directed by the Engineer-in- Charge | — | — | — | 22,294 | |
| details. | Item Breakup for | — | — | ||
| Supply and laying of 90 mm (OD) DWC pipe with ISI mark, conforming to IS, along with necessary connecting sockets, couplings, tees of the same material, required for underground/track crossing/road crossing portion of cable laying as directed by the Engineer-in- Charge | — | — | — | 39,280 | |
| details. | Item Breakup for | — | — | ||
| Supply and laying of G.I. perforated cable tray of size 300 mm (width) x 50 mm (depth) x 2 mm (thickness), including necessary coupler plates, nuts, bolts, and other fixing hardware, complete in all respects and as directed by the Engineer-in-Charge | — | — | — | 2,78,703 | |
| details. | Item Breakup for | — | — | ||
| Point wiring for light point/ fan point/ exhaust fan point/ call bell point in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLS grade copper wire, modular type switch, earthing and required accessories as per specification | — | — | — | 9,77,175.5 | |
| details. | Item Breakup for | — | — | ||
| Wiring for plug on board with Switch socket, copper wiring and earthing as per specification | — | — | — | 60,868.5 | |
| details. | Item Breakup for | — | — | ||
| Point wiring for independent plug in PVC trunking (casing capping) with1.5 sq.mm (2+1E )FRLS grade copper wire, modular type switch, earthing and required accessories as per specification. | — | — | — | 93,559.4 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of 6/16 A modular switch socket (5 in 1) | — | — | — | 6,082.24 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of 1.5 sqmm single-core, multi-stranded, flexible, 1100 V grade, FRLS-grade PVC insulated copper wire, ISI marked and conforming to IS:694-1990 or latest, including laying in existing conduit or casing-capping as directed by the Engineer-in-charge | — | — | — | 3,38,118 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of 2.5 sqmm single-core, multi-stranded, flexible, 1100 V grade, FRLS-grade PVC insulated copper wire, ISI marked and conforming to IS:694-1990 or latest, including laying in existing conduit or casing-capping as directed by the Engineer-in-charge | — | — | — | 5,03,182 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of 4.0 sqmm single-core, multi-stranded, flexible, 1100 V grade, FRLS-grade PVC insulated copper wire, ISI marked and conforming to IS:694-1990 or latest, including laying in existing conduit or casing-capping as directed by the Engineer-in-charge | — | — | — | 78,660 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of 6.0 sqmm single-core, multi-stranded, flexible, 1100 V grade, FRLS-grade PVC insulated copper wire, ISI marked and conforming to IS:694-1990 or latest, including laying in existing conduit or casing-capping as directed by the Engineer-in-charge | — | — | — | 1,52,415 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of 6.0 sqmm 4-core, multi-stranded, flexible, 1100 V grade, FRLS-grade PVC insulated copper wire, ISI marked and conforming to IS:694-1990 or latest, including laying in existing conduit or casing-capping as directed by the Engineer-in-charge | — | — | — | 14,49,000 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of backlit angular/batten/holder or ceiling rose | — | — | — | 57,094.8 | |
| details. | Item Breakup for | — | — | ||
| Supply and laying of 25 mm dia. heavy-duty PVC conduit/pipe, ISI-marked and conforming to IS:9537 or latest, including all required accessories such as rawl plugs, saddles, screws, tees, junction boxes, etc., complete as directed by the Engineer-in-Charge | — | — | — | 1,88,381.2 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of single phase, 230 V, 300 mm sweep, 3 blade exhaust fan, metal blade and body of the exhaust fan should be powder coated, approximate speed 1350 RPM. The exhaust fan is to be fixed with required size 6 mm thick plywood frame along with required hardware at desired location. | — | — | — | 64,909.8 | |
| details. | Item Breakup for | — | — | ||
| Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 450 mm. 1400 RPM complete erected in position as per requirement | — | — | — | 58,721.7 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of Energy efficient BLDC Wall mounting Fan 400 mm sweep Oscillating type Max input power 35 watts or less, Air delivery 70 cu. meter / minute (minimum) 03 steps speed with remote control suitable to work on 230 V, 50 Hz AC Supply | — | — | — | 48,042.3 | |
| details. | Item Breakup for | — | — | ||
| Supplying and erecting air circulator 600 mm. sweep oscillating type, wall mounting 1440 RPM without speed regulator, overheat protection unit, totally enclosed, flame proof motor suitable for 230/250 volts single phase, 50 cycles A.C. supply, core lead wire and with moisture proof treatment to winding and with 'E' class insulation | — | — | — | 4,00,986 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of Super Efficient Electric Ceiling Fan with Electronic Regulator/Remote for 1200 MM size (48 inch) three Blades ,power consumption <= 35 watts, in. Air Delivery 220 m3/min or more ,Motor type Brushless DC (BLDC) with down rod and standard accessories (Minimum Warrantee - 2 years) | — | — | — | 16,40,898 | |
| details. | Item Breakup for | — | — | ||
| Supply, fixing,testing & commissioning of decorative type super energy efficient BEE 5 star rated BLDC ceiling fan 1200mm (48 inch) sweep with down rod and standard accessories fan as per sample approved & as per specifications (Minimum Warrantee - 2 years) | — | — | — | 9,67,269 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of Super Efficient Electric Ceiling Fan with Electronic Regulator/Remote for 1400 MM size (56 inch) three Blades ,power consumption <= 35 watts, in. Air Delivery 245 m3/min or more ,Motor type Brushless DC (BLDC) with down rod and standard accessories (Minimum Warrantee - 2 years) | — | — | — | 5,22,376 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of 10 Watt 2 feet led batten fitting with connection and necessary fixing arrangements as per site requirement. | — | — | — | 62,080 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of 20 W LED Tube light Fitting, 4ft with IP 20 complete with connection and necessary fixing arrangements as per site requirement | — | — | — | 64,730 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of 40 Watt LED Tube Light with IP 20 complete with connection and necessary fixing arrangements as per site requirement | — | — | — | 5,20,855 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of 18 W, 1ft. x 1ft. recess/ surface mounted led panel light made from extruded aluminium housing frame with PMMA/polycarbonate diffuser, to operate on 230 V AC 50 HZ with IP 20 protection complete as per specification | — | — | — | 1,94,132 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of 36 W, 2ft. x 2ft. recess/ surface mounted slim led panel light made from extruded aluminium housing frame with PMMA/ polycarbonate diffuser to operate on 230 V AC50 HZ with IP 20 protection complete as per specification | — | — | — | 5,24,340 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of 50 W LED Mid Bay/Well Glass Luminaire with reflector, pressure die-cast aluminium housing, epoxy powder-coated finish, opal polycarbonate diffuser, efficacy 110 lm/W, CCT 5700K, CRI 70, PF 0.95, THD <10%, driver efficiency >85%, beam angle 120°, IP65 protection, with inbuilt short circuit/open load/reverse polarity protection | — | — | — | 1,42,69,120 | |
| details. | Item Breakup for | — | — | ||
| Supply, Fixing, testing and commissioning of decorative gate light made up of high grade unbreakable polycarbonate material suitable for 20 Watt LED lamp B22 base complete as per IS & IE rules and site requirement prior approval of sample. | — | — | — | 1,29,453 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of LED street light luminaire 45W, IP 66, housing shall be pressure diecasted aluminium alloy with higher thermal conductivity corrosion resistant, powder coated, toughened transparent glass cover, secondary lens optics complete as per specification | — | — | — | 1,22,167.5 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of 150W highbay LED fitting with lamp ,round type, Lux>=120Lm/Watt ,Protection IP 65, duly connected complete with accessories as per specification | — | — | — | 3,04,143.75 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of 200 W LED flood light, Ingress protection IP 66 ,High Power LED, pressure dia-cast housing and heat sink in aluminium extrusion ,high efficiency toughened lamp cover, secondary lens optics complete ,white colour as per specification | — | — | — | 9,02,660.22 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of 350 W LED flood light, Ingress protection IP 66 ,High Power LED, pressure dia-cast housing and heat sink in aluminium extrusion ,high efficiency toughened lamp cover, secondary lens optics complete, white colour as per specification | — | — | — | 10,11,267.5 | |
| details. | Item Breakup for | — | — | ||
| Design ,supply, erection, testing & commissioning of USB Power charger HUB/Device enclosed inside the frame on the top, 5.2VDC / 8 Amp, 8 Ports (vertical) with reversible compability. Input Voltage: 110-290V AC, 1.5 Mtrs. Cable length, Blue coloured LED display for Current & Voltage at each port & smart chip for calibrating the Current required on each powerport. Metal Holder attached with USB device to keep 8 Mobile Phone. Size 580mm X 400 mm X 2 mm thick. | — | — | — | 3,30,883.52 | |
| details. | Item Breakup for | — | — | ||
| Design, supply, erection, testing and commissioning of LED station name board with Individual English letter | — | — | — | 71,526.42 | |
| details. | Item Breakup for | — | — | ||
| Design, supply, erection, testing and commissioning of LED station name board with Individual Devanagari letter for Hindi & Marathi | — | — | — | 1,41,696.32 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of water cooler, Storage Capacity-150 Litres, Cooling Capacity- 150Litres/hr, Eco friendly refrigerant, Stainless steel tank, energy efficient compressor conforming to IS:1475 (part-1):2001 (Reaffirmed 2007) | — | — | — | 7,33,314 | |
| details. | Item Breakup for | — | — | ||
| Design, fabrication, supply and erection of stainless steel safety cage for battery charger / water cooler etc | — | — | — | 4,82,940 | |
| details. | Item Breakup for | — | — | ||
| Supply, installation, testing and commissioning of 25 liter capacity vertical Geyser. Geyser shall be ISI Marked as per 2082(part-I)/1983 with latest amendment, 5 star rated, rated power input 2000 watts, 230v, single phase , 50 Hz, AC made of ultra-thick super cold rolled steel plates with wall mounted accessories. | — | — | — | 51,298.32 | |
| details. | Item Breakup for | — | — | ||
| Supply, Erection, testing and commissioning of 2 KVA on line UPS with 120 minutes back up, inbuilt isolation transformer, including batteries and suitable trolley/battery rack | — | — | — | 2,33,095.2 | |
| details. | Item Breakup for | — | — | ||
| Supply, erection, testing, and commissioning of 1 Ton portable air conditioner, having cooling capacity of approx. 3500 W (12000 BTU/hr), suitable for 230V, 50Hz, single-phase AC supply, equipped with energy-efficient rotary compressor, using eco-friendly refrigerant, with LED display, thermostat control, dehumidifier function, 3-speed fan, low-noise operation, and castor wheels for easy mobility, complete with all standard accessories. Make: Blue Star Model PC12DB / CRUISE Model PQ1W12 or equivalent approved model | — | — | — | 69,990.4 | |
| details. | Item Breakup for | — | — | ||
| Supply, erection, testing, and commissioning of 1.5 Ton inverter type high wall Split Air Conditioner with remote, having copper coil, eco-friendly refrigerant, and minimum 5-star BEE rating. Unit shall conform to IS:1391 or latest and have ISEER 5. Includes 3 metre copper piping with insulation and electrical cable. Warranty: 1 year on machine, 10 years on compressor, and 5 years on PCB. Complete in all respects | — | — | — | 5,03,697.8 | |
| details. | Item Breakup for | — | — | ||
| Supply, installation, testing, and commissioning of 2.0 Ton inverter type high wall Split Air Conditioner with remote, conforming to IS:1391 (Part 2) or latest, ISEER 5. Unit shall have 5- star BEE rating or higher, 100% copper coil, suitable for R-410A or latest eco-friendly refrigerant. Includes 6 metre copper piping with insulation and electrical cable. Warranty: 1 year on machine, 10 years on compressor, and 5 years on PCB. Complete in all respects | — | — | — | 7,03,893.8 | |
| details. | Item Breakup for | — | — | ||
| SETC of hard copper refrigerant piping size 12.7 mm for suction line (1/2 inches). with 19/13 mm closed cell insulating material class O for insulating the copper pipe lines. The piping system must be supported at suitable distance. Rates to include necessary accessories, fittings, supporting system as required. | — | — | — | 1,92,056 | |
| details. | Item Breakup for | — | — | ||
| SETC of hard copper refrigerant piping size size 6.3 mm for liquid line (1/4 inches) with 19/13 mm closed cell insulating material class O for insulating the copper pipe lines. The piping system must be supported at suitable distance. Rates to include necessary accessories, fittings, supporting system as required | — | — | — | 1,92,056 | |
| details. | Item Breakup for | — | — | ||
| SETC of hard copper refrigerant piping size 15.8 mm for suction line (5/8 inches) with 19/13 mm closed cell insulating material class O for insulating the copper pipe lines. The piping system must be supported at suitable distance. Rates to include necessary accessories, fittings, supporting system as required. | — | — | — | 1,92,056 | |
| details. | Item Breakup for | — | — | ||
| SETC of hard copper refrigerant piping size 9.5 mm for liquid line (3/8 inches) with 19/13 mm closed cell insulating material class O for insulating the copper pipe lines. The piping system must be supported at suitable distance. Rates to include necessary accessories, fittings, supporting system as required. | — | — | — | 1,92,056 | |
| details. | Item Breakup for | — | — | ||
| SETC of powder coated metallic wall mounting stand suitable for outdoor unit (1.5 ton/2 ton) | — | — | — | 11,517.4 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of 4 Core 2.5 sq.mm, Multistrand Copper Conductor, PVC Insulated Flexible cable, suitable up to 1100 Volts, Conforming to IS 694 or latest | — | — | — | 23,465 | |
| details. | Item Breakup for | — | — | ||
| Supply, installation, testing and commissioning of 20 Amp. Plug with socket and 20 Amp MCB SP with plastic enclosure (for surface mounting) complete with all associated accessories as per specification | — | — | — | 7,837.4 | |
| details. | Item Breakup for | — | — | ||
| Provision of core cutting. | — | — | — | 31,003.4 | |
| details. | Item Breakup for | — | — | ||
| Supply and fixing of 25 mm PVC drain pipe as per specification | — | — | — | 23,064 | |
| details. | Item Breakup for | — | — | ||
| Supplying, fixing and commissioning 2 pole RCBO up to 25A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100 mA sensitivity and short circuit and earth leakage trip indication as per specification | — | — | — | 12,70,098.72 | |
| details. | Item Breakup for | — | — | ||
| Supplying, fixing and commissioning 4 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100 mA sensitivity and short circuit and earth leakage trip indication as per specification | — | — | — | 82,832 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of MCB ,4 Pole, 40 A, Type B or C tripping characteristics, rated 240/415 V AC, with a minimum breaking capacity of 10 kA, suitable for mounting in distribution boards or enclosures, conforming to IS/IEC 60898-1(latest edition) | — | — | — | 23,992.35 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of MCCB, 4 Pole, 63 A, 415 V AC, 50 Hz, with 25 kA breaking capacity (Ics = 100% of Icu), equipped with adjustable thermal-magnetic release, suitable for mounting in electrical panels or enclosures, conforming to IS/IEC 60947-2 (latest edition) | — | — | — | 97,350 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of MCCB, 4 Pole, 100 A, 415 V AC, 50 Hz, with 25 kA breaking capacity (Ics = 100% of Icu), equipped with adjustable thermal-magnetic release, suitable for mounting in electrical panels or enclosures, conforming to IS/IEC 60947-2 (latest edition) | — | — | — | 1,57,320 | |
| details. | Item Breakup for | — | — | ||
| Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB/TP MCB/FP MCB/RCCB/RCBO complete erected on provided angle iron/GI frame as directed by the Engineer-in-charge | — | — | — | 9,628.8 | |
| details. | Item Breakup for | — | — | ||
| Supplying & erecting triple pole and neutral distribution board (TPNDB), suitable for SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on provided iron/GI frame (horizontal busbar type) as per specification | — | — | — | 42,320.7 | |
| details. | Item Breakup for | — | — | ||
| Supplying & erecting triple pole and neutral distribution board (TPNDB), suitable for 4 pole MCCB as incomer & outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles), with door, 1.2mm thickness, surface/flush mounted, on provided iron/GI frame (vertical busbar type) as per specification | — | — | — | 1,37,051.1 | |
| details. | Item Breakup for | — | — | ||
| Supplying & erecting triple pole and neutral distribution board (TPNDB), suitable for 4 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles), with door, 1.2mm thickness, surface/flush mounted, on provided iron/GI frame (vertical busbar type) as per specification | — | — | — | 1,88,823.6 | |
| details. | Item Breakup for | — | — | ||
| Supply, installation, testing and commissioning of control panel for automation of Platform lighting arrangement as per specification | — | — | — | 7,30,090.56 | |
| details. | Item Breakup for | — | — | ||
| Supply, fabrication, erection, testing and commissioning of out door LT distribution panel with 250A 02 Nos 4 pole MCCB for incoming and 200 Amp 4 pole MCCB 04 Nos and 100 amp 4 pole MCCB 04 Nos and 63 Amp 4 ple MCCB 04 nos for outgoing, LED indicator for each feeder and Multifunction meter for each feeder with required CT. | — | — | — | 2,98,301.13 | |
| details. | Item Breakup for | — | — | ||
| Supply, fabrication erection, testing, commissioning and replacement of LT distribution panels with 400 A 02 Nos 4 pole MCCB for incoming and 250 Amp 4 pole MCCB 4 Nos and 125 Amp 4 Nos and 63Amp 4 pole MCCB 4 Nos for outgoing, LED indicator for each feeder and multi function meter for each feeder with required CT. | — | — | — | 3,19,652.08 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of cable junction box 250x200x100 mm size with metric knockouts for cable entry with IP 65 protection | — | — | — | 3,33,347.4 | |
| details. | Item Breakup for | — | — | ||
| Supplying and erecting 16 m (clear height) High Mast (Top-150mm, Bottom- 360mm) with lowering and raising motorized unit, lantern carriage assembly suitable for max. 8 nos. luminaries and its control gear box, lightning finial arrangement for fixing aviation light and foundation bolts on provided foundation as per approved specification (excluding luminaries). | — | — | — | 2,57,885.59 | |
| details. | Item Breakup for | — | — | ||
| Making M-20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 16 m raising lowering high mast) | — | — | — | 31,166 | |
| details. | Item Breakup for | — | — | ||
| Supplying and erecting Outdoor Stand Mounted Feeder Pillar for high mast of the same manufacturer with 63A TPN MCB incomer, single dial timer switch, 45A TP contactor for automatic switching of luminaries, 2 no's 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables erected in min. 14 SWG CRCA sheet box powder coated with supporting angles, self-lock, gasket and slanting top erected with CC foundation complete. | — | — | — | 1,63,184.65 | |
| details. | Item Breakup for | — | — | ||
| Supply, fixing, testing and commissioning of 5 mtr height decorative pole with single arm, complete with bracket and necessary foundation arrangements. | — | — | — | 6,02,181.6 | |
| details. | Item Breakup for | — | — | ||
| Supply, erection, testing and commissioning of LED Post top 65 Watt with spun aluminium housing for lamp and reflector assembly with clear polycarbonate cover and IP 65 protection. | — | — | — | 3,15,918.4 | |
| details. | Item Breakup for | — | — | ||
| Supply of erection of 5 Meter length octagonal pole hot dip galvanized with 130MM bottom A/F &70 MM top A/F with 1 Meter long hot dip galvanized single arm standard bracket including foundation as per requirement. | — | — | — | 72,249.25 | |
| details. | Item Breakup for | — | — | ||
| Supplying and erecting 2A SP MCB. | — | — | — | 6,742.25 | |
| details. | Item Breakup for | — | — | ||
| Supplying , erecting , testing and commissioning of Astronomical Street Light Timer with setting of 15 calendar year in weather proof box enclosure in CR sheet 16 SWG, painted, with locking arrangement suitable for Universal time switch with 25 AMP contactor coil voltage 230 volt and 32 AMP, MCB 3 pole having inbuilt short circuit indication (flag) rating 20 A - 32 A for incoming supply, duly wiring for system | — | — | — | 39,357.12 | |
| details. | Item Breakup for | — | — | ||
| Supply, erection, testing and commissioning of 11 KW/15 HP Open well Three phase mono submersible pump, ISI marked (IS 14220:2018), OEM verified with BEE star energy rating:3 star or above, operating on 415 V/50 Hz. | — | — | — | 1,13,212.92 | |
| details. | Item Breakup for | — | — | ||
| Supply, erection, testing and commissioning of Automatic control panel for 3 Ph, 415 volt, A.c. Submersible/ centrifugal pump set upto 20 HP as per specification | — | — | — | 33,976.8 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of Nylon rope with 16 MM, 3 Strand, un-spliced, with higher load and breaking capacity and as per IS 4572:2014 or latest | — | — | — | 3,896 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of ISI marked 3 Core, 4 sq.mm, flexible multi stranded flat copper cable, PVC insulated and sheathed ,suitable to use for submersible pump and conforming to IS-694 latest | — | — | — | 19,669 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of B class 65 MM GI pipe with accessories (bend coupling, Tee, flange etc) | — | — | — | 50,096.5 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of Heavy-duty Non-Return Valve, 65 mm dia. as per IS specification. | — | — | — | 14,719.14 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of Heavy-duty Sluice Valve, 65 mm dia. as per IS specification. | — | — | — | 16,224.08 | |
| details. | Item Breakup for | — | — | ||
| Provision of GI strip of 25 x 3 mm size | — | — | — | 11,002.5 | |
| details. | Item Breakup for | — | — | ||
| Supply and laying of 10 SWG GI wire. | — | — | — | 1,505 | |
| details. | Item Breakup for | — | — | ||
| Provision of pole earthing with 20 mm dia 'B' class 1.28 mtr long GI pipe | — | — | — | 12,183.25 | |
| details. | Item Breakup for | — | — | ||
| Provision of earthing with 40 mm dia 'B' class 2.5 mtr long GI pipe | — | — | — | 6,788.9 | |
| details. | Item Breakup for | — | — | ||
| Supply, erection, testing & commissioning of maintenance free & Permanent earthing. | — | — | — | 1,40,496.5 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of Rubber mat upto 22 KV tested with chequered top of size 6'x3'x16 mm thick with ISI mark | — | — | — | 11,700 | |
| details. | Item Breakup for | — | — | ||
| Fabrication ,supply and erection of MS channel/angle/ flat etc. for cross-arm/clamp fan hook, anchor fastner etc., complete as directed by the Engineer-in-Charge | — | — | — | 54,549 | |
| details. | Item Breakup for | — | — | ||
| Fabrication ,supply and erection of GI items (GI pole, Channel, angle, flat, clamps nut bots, fan hook, fastener, street light bracket, GI wire Etc.), complete as directed by the Engineer-in- Charge | — | — | — | 96,915 | |
| details. | Item Breakup for | — | — | ||
| Provision of CC 1:2:4 in foundation with 25 mm graded stone along with excavation in hard soil or soil with concrete or tar layer etc. as directed by the Engineer-in-Charge | — | — | — | 13,892.85 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of cast iron cable marker | — | — | — | 11,287 | |
| details. | Item Breakup for | — | — | ||
| Chiseling and refilling of wall/ceiling appropriate depth and width for concealed wiring, cable and DB switch board etc. as directed by the Engineer-in-Charge | — | — | — | 9,970 | |
| details. | Item Breakup for | — | — | ||
| Cutting of road / concrete / wall as per specification as directed by the Engineer-in- Charge | — | — | — | 12,507 | |
| details. | Item Breakup for | — | — | ||
| Cable trench covers | — | — | — | 1,00,999.6 | |
| details. | Item Breakup for | — | — | ||
| Reinforced concrete for foundation, cable trench and baffle wall as directed by the Engineer-in-Charge | — | — | — | 3,06,892.4 | |
| details. | Item Breakup for | — | — | ||
| Brick work as directed by the Engineer-in-Charge | — | — | — | 76,099.68 | |
| details. | Item Breakup for | — | — | ||
| Plastering of brick work as directed by the Engineer-in-Charge | — | — | — | 9,094.5 | |
| details. | Item Breakup for | — | — | ||
| Making of cable trench of suitable width and required depth with excavation and back filling of excavated earth in hard soil or soil with concrete/tar layer or track crossing or road crossing portion, as directed by the Engineer-in-Charge | — | — | — | 99,108 | |
| details. | Item Breakup for | — | — | ||
| Dismantling of existing catenaries wire (6 run) system including all associated accessories, MS structure etc. complete and make site as original. Released material handing over to concerned depot | — | — | — | 23,040 | |
| details. | Item Breakup for | — | — | ||
| Dismantling of High Mast 16 Mtrs complete in all respect with foundation & transport the release material to concerned SSE as directed by the Engineer-in-Charge | — | — | — | 29,074.85 | |
| details. | Item Breakup for | — | — | ||
| Dismantling of point wiring for Light & Fan including fitting & transportation to Rly.depot as directed by the Engineer-in-Charge | — | — | — | 1,78,240 | |
| details. | Item Breakup for | — | — | ||
| Dismantling of existing MDB including disconnection of cable, including loading, unloading and transportation as directed by the Engineer-in-Charge | — | — | — | 4,053.2 | |
| details. | Item Breakup for | — | — | ||
| Dismantling/Removing and Rerouting of existing aluminium conductor armored cables from 4-300 sq mm X 4 core, with clamping and by removing M. S. cable clamp as directed by the Engineer-in-Charge | — | — | — | 39,720 | |
| details. | Item Breakup for | — | — | ||
| Supply and installation of BIS-listed semi-automatic stainless steel preventive device with UL-approved clean agent gas with auto/manual reverse stainless steel valve, having a capacity of 4 kg and made of stainless steel 304 grade with Indian Railways logo on each unit and conform to the specification IS 15683:2018 or latest (To be inspected by RITES) Make & Model: NASA 400 MAR or similar as approved Warranty Period : Upto 30 months from the date of supply | — | — | — | 35,000 | |
| details. | Item Breakup for | — | — | ||
| Supply and installation of BIS-listed semi-automatic stainless steel preventive device with UL-approved clean agent gas with auto/manual reverse stainless steel valve, having a capacity of 6 kg and made of stainless steel 304 grade with Indian Railways logo on each unit and conform to the specification IS 15683:2018 or latest (To be inspected by RITES) Make & Model: NASA 600 MAR or similar as approved Warranty Period : Upto 30 months from the date of supply | — | — | — | 56,000 | |
| details. | Item Breakup for | — | — | ||
| Supply of Telescopic ladders 19.5 Ft(6.0 meter) Extension Portable, Telescoping Foldable/Extendable Aluminium Ladder with stabilizer Bar I Ladder for Home and Industrial use, 15 steps ,EN 131 Certified ,Silver, weight capacity 150kg and above. | — | — | — | 10,384 | |
| details. | Item Breakup for | — | — | ||
| Supply of closed hight : 20 feet , extended hight : 35 feet , Aluminium wall extension ladder manufactured from Aluminium C - SECTION OF 67 mm(L) X 31 mm(W) X 3.5 mm(T) confirming to HE- 30 Grade T - 6 temper as per IS: 733 and Aluminium 25.4 mm diameter round corrugated step placed at 305 mm distance center to center with Aluminium LM - 6 catcher to lock ladder at every rung , nylon rope and pulley. Overall width of ladder 530 mm. Ladder fabricated by expanding and flaring runs with stiles of the ladder for 100 % twist proof and unbreakable performance. Make- Skyward, Sumer, S J lADDERS OR SIMILAR Warranty Period : Upto 30 months from the date of supply | — | — | — | 14,077.4 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ApprovedTBPUNE_ELECT_G_26_07.pdf
ATTACHMENT
ANNEXUREVVA.pdf
ATTACHMENT
ANNEXURE-I.pdf
ATTACHMENT
ANNEXURE-VIA.pdf
ATTACHMENT
ANNEXURE-VIB.pdf
ATTACHMENT
eBGforEMDandPGinworkscontracts16062026.pdf Acceptance of eBG for work contract
ATTACHMENT
GCCApril2022withCorrectionslips1to11.pdf
ATTACHMENT
eBGforEMDandPGinworkscontracts16062026.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .