Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.3 LAccepted-Finance | L1 | Accepted-Finance L1 Bidder | |
| 2 | L1₹32.3 LAccepted-Finance | L1 | Accepted-Finance L1 Bidder | |
| 3 | L2₹32.3 L+₹255.04 (<0.01%)Accepted-Finance | L2 | Accepted-Finance L2 Bidder | |
| 4 | L3₹35.3 L+₹3.0 L (9.26%)Accepted-Finance | L3 | Accepted-Finance L3 Bidder | |
| 5 | L4₹37.1 L+₹4.9 L (15.1%)Accepted-Finance | L4 | Accepted-Finance L4 Bidder |
Tender Value
₹40.3 L
EMD Value
₹80,660
Closing Date
31 Aug 2023, 4:00 pmClosed
EXECUTIVE ENGINEER WSMP DIV SGR
SOURA SRINAGAR
CONSTRUCTION OF 0.50 LAC GALLONS UNDERGROUND SUMP WITH OPERATOR QUARTER FOR MIGRANT COLONY ZEWAN WSS MIGRANT COLONY ZEWAN (UNDER UT CAPEX)
2023_PHE_225522_2
SHORT E-NIT NO. 20/WSMP OF 2023-24 DT.20.08.2023
Open Tender
Civil Works - Water Works
Item Rate
60 days
ZEWAN
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,000
EXECUTIVE ENGINEER WSMP DIV SGR
₹80,660
Yes
8 Sept 2023
8 Aug 2023
1 Sept 2023
8 Aug 2023
31 Aug 2023
8 Aug 2023
Amount
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :
Providing and laying of dry stone soling in foundation/trenches hand packed and consolidated by hand ramming. (Subject to actual quantities during execution).
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: i. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. i. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. i. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) .
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with. i. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. i. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. i. Mild steel and medium tensile steel bars.
Providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers:
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: i. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : i. Cement mortar 1:6 ( 1 cement : 6 coarse sand)
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): i. Second class kail wood
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. i. 40mm thick with 20 mm nominal size stone aggregate.
Centering and shuttering including strutting, propping etc. and removal of form for: i. Foundations, footings, bases of columns etc. for mass concrete.
ii. Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.
iii. Columns, piers, abutments, pillars, posts and struts.
iv. Lintel, beams, plinth beams, girders, bressumers and cantilevers.
v. Arches, domes, vaults upto 6 m span. Suspended floors, roofs, landings, balconies and access platforms.
Extra for shuttering in circular work (20% of respective centering and Shuttering items). i. Foundation
ii. Walls
iii. Beams
iv. Suspended Floors
12mm Cement plaster of mix: i. 1 : 4 ( 1 cement : 4 fine sand).
Finishing walls with 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. i. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
Dry random rubble masonry with hard stone in foundation and plinth: i. With bond stone (Quarry).
Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: i. Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture
Providing and fixing of MS lid/Ladder/Locking arrangement incl cost of Link Locks for Gate/MS Lid /Sluice Chamber to Service Resorvior.
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. i. Fixed to steel windows by welding
Providing & fixing of Sluice Valve/regulatory valves ZOLOTO Made including cutting of pipes/ P/F of MS flanges incl cost of nuts bolts & washers complete job. i. 150mm dia Sluice Valve.
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. i. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. (M.S. tube).
Providing sanitary and plumbing works viz; fixing Indian type WC, flushing cistern, stain less steel sink, necessary PVC/ GI pipes, 1000L triple Layer Tanky all fittings in toilet and kitchen including all necessary acessorories of Plumbing/sanitary work all as complete job.
Providing elecrification job complete including cost of wiring, switches , Boards etc. Complete Job.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. i. In colour such as White, Ivory, Grey, Fume Red Brown
Providing & fixing of MS Flanged joints including Cutting of threads, Cost of nuts bolts & washers / Welded Joints including hire charges of Welding Machine /Generator (For Wash Out/Overflow Grid & Sluice Valve Fixing). i. 150mm MS Flanged Joints
ii. Welded Joints 150mm
Providing & fixing aluminum Harware viz Hinges Tower Bolts etc.
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete (On steel work).
Providing/Fabricating/Fixing of MS Fittings Viz Bends, Tees , Double Collars ,Tail Pieces of suitable degrees to be fabricated from 6mm/8mm thick MS plate as per the requirement at site. This also includes welding charges ,cutting , threading etc. .The work should be leak proof .This item aslo including lead clauking , Red Oxide primer coat, cost of spun yarn Complete Job.
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). i. Second kail wood (35mm thick).
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. i. Particle Board 12mm thick a. Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 12823 marked
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. i. Second class Kail wood (30mm thick)
Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. i. With Galvanized M.S. Wire gauge with wire of dia 0.63 mm a. With 2nd class teak wood beading 62x19 mm
Carriage of material from various sources upto actual site of work by mechanical transport. i. Cement and Steel for an avg. lead of 10Kms.
ii. Sand for an avg. lead of 15Kms.
iii. Aggregate 20mm nominal size for an avg. lead of 5Kms.
iv. Aggregate 40mm nominal size for an avg. lead of 5Kms.
v. Stone Soling for a avg. lead of 5Kms
vi. Bricks for an avg. lead of 5Kms.
SHEIKH IMRAN
KAWDARIE CONSTRUCTIONS
MUZAFFAR AHMED BHAT
M/S VALLEY STAR ENTERPRISES
Kay and Q Infrastructures Private Limited
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .