SPECIAL REPAIR TO CERTAIN ROADS AND ROAD FURNITURE AT MINTSD AND SPL REPAIR TO ROAD AT CERTAIN UNITS, OTP LINE AND KT LINE IN AGE B/R-II UNDER GE (SOUTH) PUNE

Amount

Repair to pot holes of any depth not exc. 1 Sqm each incl. sweeping free from dust and mud or water, scoring surfaces in roads, paths etc. cutting around edges to at atleast 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming ( incl.supply of road metal) and making good by applying tack coat @ 5 kg per XSqm putting in pre mixed semi dense asphaltic concrete (design mix) 25 mm consolidated thickness with 5.5% binder content by weight of total mix laid with mechanical paver rolled and compacted to required camber and gradient with 8 to 12 ton power roller complete all as specified.

Scarifying or picking gravelled ,macadam or bituminious macadam surfaces in area exc 400 sqm, exc 50mm and n exc 100mm deep and removing the same to a distance n exc 50m and stacking where directed complete all as specified

M&L for 75mm thick WBM (compacted thickness ) with Granite, trap or Basalt stone coarse aggregate of grading 2 (63 to 40mm size) or of grading 3(50 to 20mm size) rolled and consolidated to gradient and camber required with grnite ,trap or basalt type aggregate 8 to 12 ton power roller complete all as specified & directed.

M&L for Preparing unsurfaced WBM surface of road with wire brushing for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny Bags to remove all loose dirt etc applying evenly a priming tack coat with bitumen primer of bitumen grade VG-10 @ 10.0 kg per 10 sqm complete all as specified & directed.

M&L for providing premix bituminious macadam (consolidated thickness 70 mm) with 4% binder content by weight of total mix using bitumen VG-30 laid rolled and compacted to required camber and gradient with 8 to 12 ton power roller complete all as specified and directed.

M&L for Preparing existing black top surfaces of road with wire brushing for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc applying evenly a priming tack coat with bitumen primer of bitumen grade VG-10 @ 5.0 kg per 10 sqm and providing and laying bituminous premixed semi-dense asphaltic concrete 30 mm thick (consolidated thickness) with 5.5 % paving bitumen of grade VG-30, binder content by weight of total mix, rolled and compacted to required gradieent & camber using 8 to 12 tonne power roller complete all as specified and directed. Note :- Contractor shall submit the authenticated weigh batch receipt as per load material in site duly marked vehicle No

M&L for moorum /red Bajri in spread thickness,rolled, watered and consolidated to gradient and camber complete all a specified and directed.

M & L for Providing and laying at or near ground level factory made kerb stone of M25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve hall not to more than 5 mm), includings making drainage opening wherever required complete. , complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of black top surfaces of road and applying thermo plastic paint 2mm thick retro-reflective thermoplastic road marking paint, as in lines, dashes, arrows, letters etc on roads, pavements and the like exc 10cm width, by mechanical machine white or golden yellow colour complete all as specified and directed .

S&F in repairs plastic Glass Beads Reflectors Cat Eyes made of body materials ABS plastic size 117mmx117mmx23mm reflector 19 or 20 BI glass elements on each side with compressive strength upto 35 tonnes yellow colour body with reflector fixing by epoxy all as specified. Make :- 3M / Dark Eye / Alcolite as approved by GE

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed

M&L for 75mm plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base/ flooring complete all as specified and directed

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade as in floor/pavement laid over 25 mm thick stone dust /sand cushioning, laid dry to the profile over subbase/ hardcore filling complete all as specified and directed.

M&L for cement concrete chequerred tiles with grey cement and pigment of size 30cmx30cmx22mm thick in floor/pavement laid, set jointed and pointed in grey cement and pigment in cement slurry over and including 20 mm thick screed bed in CM (1:6) complete all as specified and directed

M&L for Preparing new Finishing Kerb stone with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coatof exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed →

M/L for PCC 1:2:4 type B1 (using 20mm graded aggregate) as in ccement concrete in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L for RCC 300mm dia concrete pipe NP3 jointed in cement mortar including necessary excavation and earthwok / demoilition of old existing pipe complete all as specified and directed.

M&L for 75m thick PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in floor etc finished even and smooth without using extra cement, spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green including demolition complete all as specified and as directed.

M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound complete all as specified and directed.

S&F in repair solar road stud of size 125x125x25mm with shank of 60mm aluminium alloy shell with 03 LED on each side with compressive strength up to 20 tonnes fixing by epoxy all as specified and directed.

Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 and necessary excavation and earth work complete all as specified and directed

S&F in repairs unbreakable traffic convex mirror of dia 1000mm fixed over & including 50mm bore SS pipe of length 1500mm fixed in ground with PCC 1:4:8 in foundation inlcuding all necessary excavation and earth work complete all as specified and directed.

PAVEWAY CONSTRUCTIONS PRIVATE LIMITED