PROPOSED CONSTRUCTION OF PATTAN PANCHAYAT OFFICE BUILDING AT IN KUKANUR T.P. LIMIT.

PROPOSED CONSTRUCTION OF PATTAN PANCHAYAT OFFICE BUILDING AT IN KUKANUR T.P. LIMIT.

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Earth work excavation for Foundation In all kinds of soils Depth upto 1.5 m by manual means for all Build- ings, Bridges, Retaining walls, Abutment Piers and such similar works as per drawing and tech...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Foundation works. The granite/trap/basalt crushed graded...

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(PWD Common Sr- 2023-24. Vol-3 .Page no:9.Item No: 5.4)

Providing and laying in position Reinforced cement concrete M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates for all Sub structures of building, Irrigation works, Sub structur...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and laying in position Reinforced cement concrete M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates for all Sub structures of building, Irrigation works, Sub structur...

Providing and laying in position Reinforced cement concrete M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates for all Sub structures of building, Irrigation works, Sub structur...

Providing and laying in position Reinforced cement concrete M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates for all Super structures of building , Road works, Water works, Ir...

Providing and laying in position Reinforced cement concrete M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates for all Super structures of building , Road works, Water works, Ir...

Providing and laying in position Reinforced cement concrete M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates for all Super structures of building , Road works, Water works, Ir...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, sc...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and si...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

Providing and fixing bright finished brass hanging type floor Door stopper with necessary screws, etc. complete.(PWD Vol-2 Common Sr- 2023-24.Page No:105,Item No:12.58)

Providing and fixing Chromium plated brass night latch of approved,quality including necessary screws etc. complete.(PWD Vol-2 Common Sr- 2023-24.Page No:105,Item No:12.61)

Providing and fixing Chromium plated brass handles of 100/125 mm with necessary screws etc. complete

Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms.(PWD Vol-2 Common Sr- 2023-24.Page No:105,Item No:12.64)

Providing and fixing bright finished brass tower bolts (barrel type) 200x10mm with necessary screws etc. complete :(PWD Vol-2 Common Sr- 2023-24.Page No:109,Item No:12.76.2)

Providing and fixing bright finished brass tower bolts (barrel type) 150x10mm with necessary screws etc. complete .(PWD Vol-2 Common Sr- 2023-24.Page No:109,Item No:12.76.3)

Providing and fixing bright finished brass tower bolts (barrel type) 100x10mm with necessary screws etc. complete .(PWD Vol-2 Common Sr- 2023-24.Page No:109,Item No:12.76.4)

Providing and fixing ISI marked 125x65x2.12 mm M.S. pressed butt hinges bright finished with necessary screws etc.(PWD Vol-2 Common Sr- 2023-24.Page No:107,Item No:12.68.1)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing & fixing of 3 track x 2-panel sliding windows made out of multichambered UPVC(Matching to RAL9016) sections and with minimumTiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) ...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners whereverrequired smooth rendering, providing and removing scaffolding, incl...

Providing and applying white cement based putty of average thick- ness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per ...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions ...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...

Providing and laying Black Lapotra Granite stone flooring in linear as wellas curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm ...

Applying one coat of water thinnable Cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...

Finishing walls with Premium Acrylic Smooth exterior paint withSilicone additives with pure Acrylic Resin, UV resistant, dirt & pick upresistant, Alkali & Water resistant of required shade: New work T...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m2 over an under coat of primer applied 0.80 ltr/10 m² of approved brand and manufacture incl...

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:

1. The surface to be polished is...

Providing and laying in position Reinforced cement concrete M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates for all Sub structures of building, Irrigation works, Sub structur...

Providing and laying in position Reinforced cement concrete M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates for all Sub structures of building, Irrigation works, Sub structur...

Providing and laying in position Reinforced cement concrete M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates for all Super structures of building , Road works, Water works, Ir...

Providing and laying in position Reinforced cement concrete M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates for all Super structures of building , Road works, Water works, Ir...

Providing and laying in position Reinforced cement concrete M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates for all Super structures of building , Road works, Water works, Ir...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, sc...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and si...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

Providing and fixing bright finished brass hanging type floor Door stopper with necessary screws, etc. complete.(PWD Vol-2 Common Sr- 2023-24.Page No:105,Item No:12.58)

Providing and fixing Chromium plated brass night latch of approved,quality including necessary screws etc. complete.(PWD Vol-2 Common Sr- 2023-24.Page No:105,Item No:12.61)

Providing and fixing Chromium plated brass handles of 100/125 mm with necessary screws etc. complete

Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms.(PWD Vol-2 Common Sr- 2023-24.Page No:105,Item No:12.64)

Providing and fixing bright finished brass tower bolts (barrel type) 200x10mm with necessary screws etc. complete :(PWD Vol-2 Common Sr- 2023-24.Page No:109,Item No:12.76.2)

Providing and fixing bright finished brass tower bolts (barrel type) 150x10mm with necessary screws etc. complete .(PWD Vol-2 Common Sr- 2023-24.Page No:109,Item No:12.76.3)

Providing and fixing bright finished brass tower bolts (barrel type) 100x10mm with necessary screws etc. complete .(PWD Vol-2 Common Sr- 2023-24.Page No:109,Item No:12.76.4)

Providing and fixing ISI marked 125 65 2.12 mm M.S. pressed butt hinges bright finished with necessary screws etc.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners whereverrequired smooth rendering, providing and removing scaffolding, incl...

PROPOSED CONSTRUCTION OF PATTAN PANCHAYAT OFFICE BUILDING AT IN KUKANUR T.P. LIMIT. (CONTINUED WORK)

Providing & fixing of 3 track 2 panel sliding windows made out of multichambered UPVC(Matching to RAL-9016) sections and with minimumTiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) a...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and applying white cement based putty of average thick- ness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per ...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions ...

Providing and Applying PU based Elastomeric Liquid Applied PU Wa- terproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proo...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...

Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm...

Applying one coat of water thinnable Cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is...

Providing and laying in position Reinforced cement concrete M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates for all Sub structures of building, Irrigation works, Sub structur...

Providing and laying in position Reinforced cement concrete M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates for all Super structures of building , Road works, Water works, Ir...

Providing and laying in position Reinforced cement concrete M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates for all Super structures of building , Road works, Water works, Ir...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, sc...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and si...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

Providing and fixing bright finished brass hanging type floor Door stopper with necessary screws, etc. complete.(PWD Vol-2 Common Sr- 2023-24.Page No:105,Item No:12.58)

Providing and fixing Chromium plated brass night latch of approved,quality including necessary screws etc. complete.(PWD Vol-2 Common Sr- 2023-24.Page No:105,Item No:12.61)

Providing and fixing Chromium plated brass handles of 100/125 mm with necessary screws etc. complete (PWD Vol-2 Common Sr- 2023-24.Page No:105,Item No:12.62)

Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms.(PWD Vol-2 Common Sr- 2023-24.Page No:105,Item No:12.64)

Providing and fixing bright finished brass tower bolts (barrel type) 200x10mm with necessary screws etc. complete :(PWD Vol-2 Common Sr- 2023-24.Page No:109,Item No:12.76.2)

Providing and fixing ISI marked 125x65x2.12 mm M.S. pressed butt hinges bright finished with necessary screws etc.(PWD Vol-2 Common Sr- 2023-24.Page No:105,Item No:12.68.1)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing & fixing of 3 track 2 panel sliding windows made out of multichambered UPVC(Matching to RAL9016) sections and with minimumTiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) an...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners whereverrequired smooth rendering, providing and removing scaffolding, incl...

Providing and applying white cement based putty of average thick- ness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per ...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions ...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...

Applying one coat of water thinnable Cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is...

Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit...

Supplying heavy gauge PVC conduit pipe B87 mm dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The co...

groove cutting in the wall Supplying heavy gauge PVC Conduit Pipe dia mm

thick with suitable size bends, metal junction boxes adhesive

paste etc., by groove cutting in the wall and fixing by bracing

groove cutting in the wall Supplying heavy gauge PVC Conduit Pipe dia mm

thick with suitable size bends, metal junction boxes adhesive

paste etc., by groove cutting in the wall and fixing by bracing

Supplying and fixing PVC/metal conduit Deep junction box 20mm dia 2mm thick

Supplying and fixing PVC/metal conduit Deep junction box 25mm dia 2mm thick

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire)...

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire)...

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire)...

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire)...

Wiring for lighting/power circuit 1.5 sqmm

Wiring for lighting/power circuit 2.5 sqmm

Wiring for lighting/power circuit 4 sqmm

Wiring for lighting/power circuit 6 sqmm

Wiring for lighting/power circuit 10 sqmm

Supplying and flush mounting powder coated / galvanized

metal box suitable for mounting modular switch plates. The

box should be firmly flush mounted after due groove cutting

in Brick/Stone/C.C wall 1...

Supplying and flush mounting powder coated / galvanized

metal box suitable for mounting modular switch plates. The

box should be firmly flush mounted after due groove cutting

in Brick/Stone/C.C wall 4...

Supplying and flush mounting powder coated / galvanized

metal box suitable for mounting modular switch plates. The

box should be firmly flush mounted after due groove cutting

in Brick/Stone/C.C wall 6...

Supplying and flush mounting powder coated / galvanized

metal box suitable for mounting modular switch plates. The

box should be firmly flush mounted after due groove cutting

in Brick/Stone/C.C wall 8...

Supplying and flush mounting powder coated / galvanized

metal box suitable for mounting modular switch plates. The

box should be firmly flush mounted after due groove cutting

in Brick/Stone/C.C wall 1...

Supplying and flush mounting powder coated / galvanized

metal box suitable for mounting modular switch plates. The

box should be firmly flush mounted after due groove cutting

in Brick/Stone/C.C wall 1...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc.,complete on the existing me...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc.,complete on the existing me...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc.,complete on the existing me...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc.,complete on the existing me...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc.,complete on the existing me...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc.,complete on the existing me...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary

wooden or rawl plugs using NF screws with Remote. Ding Dong Bell

Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary

wooden or rawl plugs using NF screws with Remote. Extra length of GI pipe of class B 19...

Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary

wooden or rawl plugs using NF screws with Remote. Supplying And Fixing Metal Fan Box wi...

Supplying and fixing regular MCB distribution boards on wall

wood board flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB s single phase 3 ph...

Supplying and fixing regular MCB distribution boards on wall

wood board flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB s single phase 3 ph...

Supplying and fixing 6-32Amps SP miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with

Short circuit b...

Supplying and fixing 40 Amps DP miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with

Short circuit br...

Supplying and fixing 50-63Amps TPN miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON OFF, energy cross-3 with Short circuit...

Supplying, fixing and wiring Residual current circuit breaker RCCB 240 450V up to 300mA sensitivity on existing wood panel board. 40 Amps 2 pole

Supplying, fixing and wiring Residual current circuit breaker RCCB 240 450V up to 300mA sensitivity on existing wood panel board. 63 Amps 4 pole

EARTHING Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reduc...

Supplying and running of GI Copper strips 25x3mm GI strip for groundingconnections, using necessary fixing materials as required.

ELECTRICAL FIXTURES Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI 80. Power

Input: 220-240V 5060Hz...

ELECTRICAL FIXTURES Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI 80. Power

Supply of round/square recess/surface mounted rolling type LED Down light with LED square or round down light 10-12W.W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated pr...

Supplying capacitor type 48 Sweep 1200mm Regular model ceiling fan complete with down rod blades, shackle, canopies etc. for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS...

Supplying exhaust fan of 1440 RPM of 300mm 12 size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Supplying, erecting, testing & commissioning of 1.5KVA OFF LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete.

Supplying, installation, testing & commissioning of 12Volts

75 AH batteries in poly propylene container for D.G. sets. Low

maintenance batteries, plate type.

Concealed Conduit System Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metal PVC junction boxes, adhesive paste etc., and running

before concre...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metal PVC junction boxes, adhesive paste etc., and running

before concre...

groove cutting in the wall Supplying heavy gauge PVC Conduit Pipedia mm

thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U ...

groove cutting in the wall Supplying heavy gauge PVC Conduit Pipe dia mm

thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U...

Supplying and fixing PVC/metal conduit Deep junction box 20mm dia 2mm thick

Supplying and fixing PVC/metal conduit Deep junction box 25mm dia 2mm thick

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 1.0 sqmm (Earth wire)...

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire)...

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire)...

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire)...

Wiring for lighting/power circuit Wiring for lighting/power circuit using one of FRLS PVC

insulated 1100V grade, multistrand copper wire with low

conductor resistance single core in open or concealed

Wiring for lighting/power circuit Wiring for lighting/power circuit using one of FRLS PVC

insulated 1100V grade, multistrand copper wire with low

conductor resistance single core in open or concealed

Wiring for lighting/power circuit Wiring for lighting/power circuit using one of FRLS PVC

insulated 1100V grade, multistrand copper wire with low

conductor resistance single core in open or concealed

Wiring for lighting/power circuit Wiring for lighting/power circuit using one of FRLS PVC

insulated 1100V grade, multistrand copper wire with low

conductor resistance single core in open or concealed

Wiring for lighting/power circuit Wiring for lighting/power circuit using one of FRLS PVC

insulated 1100V grade, multistrand copper wire with low

conductor resistance single core in open or concealed

Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The

box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 1-3...

Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. Thebox should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 4-5 ...

Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The

box should be firmly flush mounted after due groove cutting in Brick/Stone C.C wall 6 W...

Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The

box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 8 W...

Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The

box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 10-...

Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The

box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 16-...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc.,complete on the existing me...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc.,complete on the existing me...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc.,complete on the existing me...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc.,complete on the existing me...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc.,complete on the existing me...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc.,complete on the existing me...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall S...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6...

Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Ding Dong Bell

Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Extra length of GI pipe of class B 19...

Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Supplying And Fixing Metal Fan Box wi...

MCB DB Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single...

MCB DB Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single...

Supplying and fixing 6-32Amps SP miniature circuit breakers on existing MCB distribution boards using necessary fixing materials

and 'C' Type curve, indicator ON/OFF, energy cross-3 with

Short circuit...

Supplying and fixing 40 Amps DP miniature circuit breakers on existing MCB distribution boards using necessary fixing materials

and 'C' Type curve, indicator ON/OFF, energy cross-3 with

Short circuit ...

Supplying and fixing 50-63Amps TPN miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circu...

Supplying, fixing and wiring Residual current circuit breaker RCCB 240 450V up to 300mA sensitivity on existing wood

panel board. 40 Amps 2 pole

Supplying, fixing and wiring Residual current circuit breaker RCCB 240 450V up to 300mA sensitivity on existing wood

panel board. 63 Amps 4 pole

Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning

hours & 70 lumen maintenance with CRI 80. Power Input 220-240V @ 50/60Hz & Power factor 0....

Supplying of feet PVC Batten with integrated LED tube with high quality diffuser with Life of 25000 burning

hours & 70 lumen maintenance with CRI 80. Power Input: 220-240V 50/60Hz & Power factor 0.9 a...

Supply of round square recess surface mounted rolling type LED Down light with LED square or round down light 10-12W.W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated pr...

Supplying capacitor type 48 Sweep 1200mm Regular model ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to IS...

Supplying exhaust fan of 1440 RPM of 300mm 12 size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.

Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Supplying, erecting, testing & commissioning of 1.5KVA OFF LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding

batteries and wiring complete.

Supplying, installation, testing & commissioning of 12Volts

75 AH batteries in poly propylene container for D.G. sets. Low

maintenance batteries, plate type.

Providing and fixing floor mounted, white vitreous china single piece,double traps syphonic water closet of approved brand/make, shape,size and pattern including integrated white vitreous china cister...

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including paintingof fittings and brackets, cutting and making good the wal...

Providing and fixing Stainless Steel A ISI 304 18 8 kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good...

Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. wall mixer

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...

Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs...

Providing and fixing toilet paper holder C.P. brass

Providing and fixing 8 mm dia C.P. S.S. Jet with flexible tube upto 1metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. Jet with fl...

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40mm dia

Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling,...

Providing and fixing 100 mm sand cast Iron grating for gully trap.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore

Providing and fixing brass stop cock of approved quality : 20 mm nominal bore

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 32 mm nominal bore

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality screwed end 50 mm nominal bore

Providing and fixing gun metal non- return valve of approved quality screwed end 32 mm nominal bore Horizontal

Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length 20 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore, weighing not less than 32 g

Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology.

Supply of Gunmetal Ball Valve of Non rising stem, screwed in bonnet,inside screw, integral seats, screwed female ends to IS:554/ BS 21/ ISO7, Unbreakable sheet metal Handwheel, confoming to IS:778 Cla...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013with latest amendments ended with integral sockets with ISI mark andconveying to worksite, rolling and lowering into trenches, laying true ...

Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013with latest amendments ended with integral sockets with ISI mark andconveying to worksite, rolling and lowering into trenches, laying true ...

Supply and delivery at site special moulded variety PVC couplers as perIS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and withits latest amendments 32mm dia PVC couplers

Supply and delivery at site special moulded variety PVC couplers as perIS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and withits latest amendments 50mm dia PVC couplers

Supply and delivery at site special moulded variety PVC couplers as perIS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and withits latest amendments 75mm dia PVC couplers

Supply and delivery at site special moulded variety PVC couplers as perIS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and withits latest amendments 110mm dia PVC couplers

Supply and delivery at site special moulded variety PVC elbows as perIS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 32 mm dia PVC Elbows

Supply and delivery at site special moulded variety PVC elbows as perIS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 50 mm dia PVC Elbows

Supply and delivery at site special moulded variety PVC elbows as perIS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 75 mm dia PVC Elbows

Supply and delivery at site special moulded variety PVC elbows as perIS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 110 mm dia PVC Elbows

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 32 mm dia PVC Tee

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 50 mm dia PVC Tee

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 75 mm dia PVC Tee

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 110 mm dia PVC Tee

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 32 mm dia PVC Bend

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 50 mm dia PVC Bend

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 75 mm dia PVC Bend

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 110 mm dia PVC Bend

Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 32 mm dia PVC SERVICE SADDLES

Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 50 mm dia PVC SERVICE SADDLES

Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 75 mm dia PVC SERVICE SADDLES

Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 110 mm dia PVC SERVICE SADDLES

Supply and delivery at site special moulded variety PVC reducer as perIS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 32 mm dia PVC REDUCER

Supply and delivery at site special moulded variety PVC reducer as perIS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 50 mm dia PVC REDUCER

Supply and delivery at site special moulded variety PVC reducer as perIS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments75 mm dia PVC REDUCER

Supply and delivery at site special moulded variety PVC reducer as perIS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 110 mm dia PVC REDUCER

Providing and installing at site of work P.V.C. pipes including cost ofpipes and specials and labour, including lowering into trenches, layingtrue to line, level and perfect linking at joints leak pro...

Providing and installing at site of work P.V.C. pipes including cost ofpipes and specials and labour, including lowering into trenches, layingtrue to line, level and perfect linking at joints leak pro...

Lowering, laying true to line and level of PVC Ringtite / PVC Pipes and cuts of pipes wherever necessary including jointing of pipes and specials with jointing of approved type, with all labour with e...

Lowering, laying true to line and level of PVC Ringtite / PVC Pipes and cuts of pipes wherever necessary including jointing of pipes and specials with jointing of approved type, with all labour with e...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and fixing floor mounted, white vitreous china single piece,double traps syphonic water closet of approved brand/make, shape,size and pattern including integrated white vitreous china cister...

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including paintingof fittings and brackets, cutting and making good the wal...

Providing and fixing Stainless Steel A ISI 304 18 8 kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good...

Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. wall mixer

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...

Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs...

Providing and fixing toilet paper holder : C.P. brass

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. Jet with ...

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40mm dia

Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling,...

Providing and fixing 100 mm sand cast Iron grating for gully trap.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore

Providing and fixing brass stop cock of approved quality : 20 mm nominal bore

Providing and fixing Brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 32 mm nominal bore

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality screwed end 50 mm nominal bore

Providing and fixing gun metal non- return valve of approved quality screwed end 32 mm nominal bore Horizontal

Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length 20 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore, weighing not less than 32 g

Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology.

Supply of Gunmetal Ball Valve of Non rising stem, screwed in bonnet,inside screw, integral seats, screwed female ends to IS:554/ BS 21/ ISO7, Unbreakable sheet metal Handwheel, confoming to IS:778 Cla...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013with latest amendments ended with integral sockets with ISI mark andconveying to worksite, rolling and lowering into trenches, laying true ...

Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013with latest amendments ended with integral sockets with ISI mark andconveying to worksite, rolling and lowering into trenches, laying true ...

Supply and delivery at site special moulded variety PVC couplers as perIS 7834/ 1987 and fabricated as per IG124 1984 with ISI mark and withits latest amendments 32mm dia PVC couplers

Supply and delivery at site special moulded variety PVC couplers as perIS 7834/ 1987 and fabricated as per IG124 1984 with ISI mark and withits latest amendments 50mm dia PVC couplers

Supply and delivery at site special moulded variety PVC couplers as perIS 7834/ 1987 and fabricated as per IG124 1984 with ISI mark and withits latest amendments 75mm dia PVC couplers

Supply and delivery at site special moulded variety PVC couplers as perIS 7834/ 1987 and fabricated as per IG124 1984 with ISI mark and withits latest amendments 110mm dia PVC couplers

Supply and delivery at site special moulded variety PVC elbows as perIS 7834/ 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments 32 mm dia PVC Elbows

Supply and delivery at site special moulded variety PVC elbows as perIS 7834/ 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments 50 mm dia PVC Elbows

Supply and delivery at site special moulded variety PVC elbows as perIS 7834/ 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments 75 mm dia PVC Elbows

Supply and delivery at site special moulded variety PVC elbows as perIS 7834/ 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments 110 mm dia PVC Elbows

Supply and delivery at site special moulded variety PVC tee as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments 32 mm dia PVC Tee

Supply and delivery at site special moulded variety PVC tee as per IS 7834 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 50 mm dia PVC Tee

Supply and delivery at site special moulded variety PVC tee as per IS 7834 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 75 mm dia PVC Tee

Supply and delivery at site special moulded variety PVC tee as per IS 7834 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 110 mm dia PVC Tee

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 32 mm dia PVC Bend

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 50 mm dia PVC Bend

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 75 mm dia PVC Bend

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 110 mm dia PVC Bend

Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 32 mm dia PVC SERVICE SADDLES

Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 50 mm dia PVC SERVICE SADDLES

Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 75 mm dia PVC SERVICE SADDLES

Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments110 mm dia PVC SERVICE SADDLES

Supply and delivery at site special moulded variety PVC reducer as perIS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 32 mm dia PVC REDUCER

Supply and delivery at site special moulded variety PVC reducer as perIS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 50 mm dia PVC REDUCER

Supply and delivery at site special moulded variety PVC reducer as perIS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 75 mm dia PVC REDUCER

Supply and delivery at site special moulded variety PVC reducer as perIS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 110 mm dia PVC REDUCER

Providing and installing at site of work P.V.C. pipes including cost ofpipes and specials and labour, including lowering into trenches, layingtrue to line, level and perfect linking at joints leak pro...

Providing and installing at site of work P.V.C. pipes including cost ofpipes and specials and labour, including lowering into trenches, layingtrue to line, level and perfect linking at joints leak pro...

Lowering, laying true to line and level of PVC Ringtite / PVC Pipes and cuts of pipes wherever necessary including jointing of pipes and specials with jointing of approved type, with all labour with e...

Lowering, laying true to line and level of PVC Ringtite / PVC Pipes and cuts of pipes wherever necessary including jointing of pipes and specials with jointing of approved type, with all labour with e...

Providing and fixing white vitreous china flat back half stall urinal

of size 580x380x350 mm with white PVC automatic flushing cistern,with fittings, standard size C.P. brass flush pipe, spreaders wit...