Special Repair and Maintenace of Transit Accommodation at Kalpeni

Amount

Cement concrete block (machine moulded) masonry in in Foundation and plinth in CM 1:6 (1 cement 6 M sand) with blocks of size 40cmx20cmx15cm.

Cement concrete block (machine moulded) masonry in Superstructure above plinth level in CM 1:6 with blocks of size 40cmx20cmx15cm.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-incharge.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :of area beyond 3 sq. metres

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length.I class Karimaruthu or equivalent (hold fast lugs or dash fastener shall be paid for separately)

Providing and fixing 30 mm thick panelled, glazed or panelled and glazed shutters for doors windows and clerestory windows including anodised aluminium butt hinges with necessary screws. First class Karimaruthu or equivalent

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m²

Steel work welded in built up section / framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer usin’g structural steel etc. as required. In grating, frames, guard bar, ladder, railings, brackets,gates and similar works.

12 mm cement plaster 1:6 (1 Cement 6 M sand)

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications.Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm

Providing and fixing aluminium work for doors,windows,ventilation and partitions with extruded built up standard tubular sections/appropriate Zsections and other sections Power coated aluminium (minimum thickness of powder coating 50 micron)of approved make conforming to IS: 733 and IS : 1285, fixec with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions. at top,bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sectios shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle. Aluminium snap beading for glassing/ panelling. C.P. brass/ stailess steel scrwes. All complete as per Arcitecurals and the direction of engineer- in - charge. (glassing and panelling to be paid seperatily ) : For fixed portion.Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing aluminium work for doors,windows,ventilation and partitions with extruded built up standard tubular sections/appropriate Zsections and other sections Power coated aluminium (minimum thickness of powder coating 50 micron)of approved make conforming to IS: 733 and IS : 1285, fixec with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions. at top,bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sectios shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle. Aluminium snap beading for glassing/ panelling. C.P. brass/ stailess steel scrwes. All complete as per Arcitecurals and the direction of engineer- in - charge. (glassing and panelling to be paid seperatily ) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):with float glass panes of 5.0mm thickness

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With stainless steel cover plate minimum 1.25 mm thickness

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc.complete as per direction of Engineer-in-Charge.Anodized (AC 15 ) aluminium tubular handle bar

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

Providing and fixing factory made UV high gloss plain white color board 3 mm thick for cup boards and bathroom/kitchen cabinets etc. of required size comprising of micro crystalline powder and non toxic additives, the surface with special glaze and flourine paint processing and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-In- Charge. (Note:stainless steel screws shall be paid separately)

Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.

Providing and fixing PVC pipe half round eaves gutter with M.S brackets including bolts and nuts and necessary fitting as per approved brand and manufacture etc ..complete 200 mm(10kg/sqcms)

Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fittings including trenching and re filling etc. External work. 75 mm nominal bore

Sajna Sayed Ponnelam

Nadheem Enterprises

ABDUL SATHAR T T

MOHAMMED FAIROOS SHAH CHERIYA KUNNAMKULAM