1179/EE/MCBGARH/2020

Amount

CROSS TRAINER DIMENSIONS: - 1320mm (Length) x 600mm (Width) x 1750mm. (Height). SAFE AREA: - 1.77 x 1.2Mtr. Cross trainer equipment made from “B” Class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. The main frame Pipes are of 80NB “B” Class G.I. Pipe with single bend pipe with 250mm radius. The bottom support of M.S. round plate of Ø250 mm & 10mm thick. The Handle Frame is made up of 25NB “B” Class G.I. Pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 N “B” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 1.2 mm thickness and 20mm x 40mm CRC square pipes of 1.2mm thickness. To build structure bushes are used which are made from M.S.seamless pipe of 60mm OD. With 5 mm thickness. The footrests are made from Aluminum casting material of size 130 mm X 310mmX5mm thickness and mounted on M.S. Plate of Size 130mmx310mmx3mm thick Closing Caps are made up of high quality Fiber reinforced Plastic material. Pins used of Diameter 35mm, 25mm, and 17mm are made up from bright material. The Bearings used are of “6007” , “6205” and “6203” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts and bolts are used for assembly. The powder coating is done with Pure Polyester powders of Ackzonoble or Berger Paints with 60 to 70 Micron thickness. A16 , A 24 mm circlips are used for assembly. Bolt M8X16 mm and Nylock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust.

Seated Puller DIMENSIONS: - 1900mm (Length) x 740mm (Width) x 1920mm. (Height). SAFE AREA:- 1.2Mtr x 3Mtr Seated puller equipment made up of “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters The center pipe is of 100NB made from “B” Class G.I. pipe. Bottom support is of M.S. round plate of Ø 250 mm & 10mm thickness is welded. All linkages are made up of 25NB “B” class G.I. pipe. The handle frame is of 32NB “B” class G.I. pipe. The seat frame is of 32NB “B” class G.I. pipe, To build structure bushes are used which are made from seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class. Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 1.2 mm thickness and 20mm x 40mm CRC square pipes of 2mm thickness. Foundation cover Closing Cap is made from FRP Material with 0.7 mm Thickness. The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.Closing Caps are made up of high quality Fiber reinforced Plastic material. Pins used of Diameter 25mm and 17mm are made up from bright material. The bearings used are of “ 6205” and “6203” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts & bolts are used for assembly. The cerclips used for assembly are of A16. The powder coating done with Pure Polyester powders of Ackzonoble or Berger Paints with 60 to 70 micron thickness.

SKY WALKER DIMENSIONS: - 1720mm (Length) x 630mm (Width) x 1750mm.(Height) SAFE AREA: - 2.7Mtr x 1.6Mtr. Sky Walker Equipment made from “B” class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. The main frame pipe is of 80mm NB made from “B” Class G.I. Material which is bend at the radius of 250mm. The leg movement frame is of 50 x 50mm x 3mm thick CRC square pipe. Sleeves are made up of 100 mm OD M.S. pipe with thickness 5mm. This results in easy replacement of bearings, pins and handle. The handle frame is of 25mm NB made from “B” Class G.I. pipe.The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class. Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Two foundations are provided for rigid support. The footrests made from Aluminum casting material of size 130 X 310 X 5mm. Closing Caps are made up of high quality Fiber reinforced Plastic material. The pins used are made up of Ø 25mm bright material. Pins are fixed at the outer end with M8 grub screws and Dia.8mm SS ball. The bearings used are “6205zz” are permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts & bolts are used for assembly. The cerclips used for assembly are of A24 type. The powder coating is done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness.

SEATING & STANDING TWISTER DIMENSIONS: - 1700mm (Length) x 540mm (Width) x 1250mm. (Height). SAFE AREA: - 3 Mtr x 1Mtr. Seating & Standing Twister equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters The Center Pipe is of 100mm NB made from “B” Class G.I. Round Pipe. The M.S. round plate of Ø250 mm & 10mm thickness is welded at bottom Handle sleeve pipe of 125mm OD with thickness 5mm provided for easy assembly, replacement and maintenance. The bottom frame of the Seating & Standing twister is of 32 NB, 50 NB, and 25 NB made from “B” class G.I. pipe. The handle frame of Seating & Standing twister is 25 NB & Foot resting frame of seating side is made from “B” class G.I. pipe of 25mm NB. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class, Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRCA square pipes of 3mm thickness. The Twister plate fitted on the bottom frame is made up of M.S. Round Plate of size 300mm diameter and 10mm thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. The Pins used are made up of Ø 35 mm bright material. The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts & bolts are used for assembly. The powder coating is done by Pure Polyester powder of Berger Paint with 60 to 70 micron thickness.

SHOULDER BUILDER DIMENSIONS: - 900mm (Length) x 900mm (Width) x 1580mm (Height). Safe Area:- 1.9Mtr X 1.9Mtr Shoulder Builder Equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeter. The Center Pipe is of 100mmNB made from “B” Class G.I. pipe, and the bottom support of M.S. Round plate of 250 mm diameter & 10mm thickness. The handle movement frame is of 25mm NB made from “B” Class G.I. pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80mm NB”B”or “B” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angle of 1.2 mm thickness and 20mm x 40mm CRC square pipe of 1.2mm thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. The pins used are made up of Ø 25 mm of bright material. The bearing used is “6201zz” & “6205zz” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nut bolts are used for assembly. The cerclips used for assembly is of A 24. The nylon bush is used for handle knob.The powder coating done with Pure Polyester powder of Ackzonoble or Berger Paints with 60 to70 micron thick.

McCROMIK Industries

Satender kumar