Annual repairing, maintenance and operation for electro-mechanical accessories of the pump sets installed in storm drainage pumping plant Gr-06 (1) Rajapur Old, Gr-06 (2) Rajapur New Gr-06 (3) Mandiri Old & Gr-06 (4) Mandiri New under Patna West (Mech.), Works Division, BUIDCo, Patna for the session 2026-27

NIT No.-1 /Mech/PW/2026-27 Group-06

Name of Work:- Annual repairing, maintenance and operation for electro-mechanical accessories of the pump sets installed in storm drainage pumping plant Gr-06 (1) Rajapur Old, Gr-06 (2) Rajapur New Gr-06 (3) Mandiri Old & Gr-06 (4) Mandiri New under Patna West (Mech.), Works Division, BUIDCo, Patna for the session 2026-27.

Estimated Cost (Rs.) 34505263

Earnest Money (Rs.) 690200

Time of initial inspection & Testing of thorough repaired all machineries. 15 th May 2026

Cost of BOQ (Rs.) 23600

To be filled by the Bidder

1 Name of the Contractor/Bidder

2 Address of the Cotractor/Bidder

Gr-06 (1) Name of Work :- Estimate for the work of Annual Repairing, maintenance & operation of electro-mechanical accessorries of the pump sets installed in storm drainage pumping plant at Rajapur Old for monsoon 2026 for the year 2026-27.

Sl. No. Particular of work Unit Qty Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Complete repairing and overhauling of 350 HP VT pump set no.1 as per Annexure-1 P/Job 1

2 Complete repairing and overhauling of 350 HP VT pump set no.1 as per Annexure-2 P/Job 1

3 Cost for Repairing and overhauling of 2 nos electric motors by dismantaling the motors, double coat varnishing, heating, loop repairing, replacement of the damaged bearing, assembling with all required consumable materials and testing on load as per Annexure-3 P/Job 1

4 Cost for Supplying, installation, fitting & testing of 2x350 HP VT motor of star delta pannel board as per Annexure-4 P/Job 1

5 Cost for cleaning, servicing, greasing and repairing of flap valve as per Annexure-5 P/Job 1

6 Cost for complete repairing and servicing of 498 HP diesel Engine as per Annexure-6 P/Job 1

7 Complete repairing and overhauling of 498 HP pump set of diesel engine As per Annexure-7 P/Job 1

8 Cost for servicing, cleaning, greasing and repairing of AB switch and DP structure of 11 KV electric substation as per Annexure-8 Per job 1

9 Cost for cleaning and Desilting of sumps as per Annexure-9 . P/Job 1

10 Cost for Providing & installation of New water level Gauge as per direction of Engineer-in-charge . P/Job 2

11 Cost for Complete Reparing ,Overhauling ,Servicing & Functionlity of 10 Ton Manual Chain pulley block Over head crane mounted on DPS as Per Direction of Engineer-in-Charge. P/Job 1

12 Cost for Providing & Laying of 240 Sq.mm 3.5 core copper armoured Cable for 2x350 HP starter to motor with required Jointing kit as per Direction of Engineer -In Charge (make - KEI/Polycab/Havells). 40 m

13 Cost for outdoor cable end terminations heat shrink type LT cable jointing kit suitable for 240 mm2 cable with providing gas cylinder kit etc. As per Direction of E/I. 2 each

14 Cost for providing & installation of New M.S. grating (double coat painting) with requird size & shap of m.s channel & m.s flat (thick 10 mm) as per direction of Engineer-in-charge at S/D/P/P. Per job 1

15 Cost for Deployment of 4 nos. x 3 shifts sweepers for removing floating materials from sump, cleaning the premises, taking out the garbages from pump impeller and miscellaneous work during the monsoon period 1st june 2026 to 15th Oct 2026 and 02 no. x 1 shift from 16th Oct.2026 to 31.03. 2027 & 1st April' 26 to 31th Marchy' 2026 during rest period. each 2100

16 Cost for Deployment of 2 nos. x 3 shifts Highly skilled technician cum pump operators during the monsoon period 1st june 2026 to 15th Oct. 2026 and 01 nos. x 3 shift from rest period (16.10.2026 to 31.03.2027) & (1st April' 26 to 31th March' 2026) ( The no. of pump operators may increase as per situation arisen due to heavy rain fall). each 1506

17 Maintenance of miscllenious work of Electro-machineries for the period of (01.04.26 to31.03.27) at DPS. The Bidder shall be totally responsible for proper Functioning of DPS with immediate minor & major work repairing like burning of motor, transformer, maintenance of new supply pump & transformer per annum, panel, starter, bearing replacing, cleaning of Campus, Sprinking of Bleaching Powder, pump operation, Functionality of Sluice gate & any other equipments installed or to be install should be Functional in this DPS, Proper flood light, fan, rabber mat, Log Book, ABC store press (4 kg-02nos) & carbon dioxide (4kg-02nos) type fire extingusher required for safety purpose, spray Painting, misc.type of all civil releted work, light wiring, exhaust fan, Name Plate of buidco, wall painting, Recharge of CCTV, availability of 24 hrsx365 days in sufficient quantity of saftey materials, black stone (ballast) transportation and loading, unloadingof any equipment/material, repairing of Civil structure during emergency for water draining as per Direction of E/I. Per job 1

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

2 Cost for providing all labours, tools and tackles at site for opening and taking out discharge tee, column pipe, bowl mouth assembly, etc of 350 HP VT pump from sump p/job 1

3 Cost for opening and dismantling of bowl mouth assembly of 350 HP VT pump, taking out pump shaft, upper & lower bowl mouth, impeller, upper and lower bushes, etc in workshop. p/job 1

4 Cost for checking of top shaft & line shaft on lathe for straightness and straightening the same on hydraulic press machine. each 3

5 Cost for remetalling & rethreading at both ends of top & line shaft upto 3" length. each 3

6 Cost for making and supplying line shaft holder bronze bearing bush of size ID 75 mm OD 90 mm Length 170 mm each 1

7 Cost for making and supplying motor stool bronze bush of size ID 75 mm oD 90 mm length 180 mm each 1

8 Cost for making and fitting of SS 416 threaded barrel shaft coupling by cutting and making internal thread of size ID 73 mm OD 105 mm Length 200 mm each 3

9 Cost for making and supplying under bowl top side bronze bush of size ID 101 mm OD 117 mm Length 150 mm each 1

10 Cost for making and supplying under bowl bottom side bronze bush of size ID 101 mm OD 112 mm Length 180 mm each 1

11 Cost for making and supplying bell mouth bronze bush of size ID 101 mm OD 114 mm Length 350 mm each 1

12 Cost for making, supplying and fitting SS 316 Key of size 120 mm long x 22 mm wide x 10 mm thick for impeller and coupling. each 2

13 Cost for making, supplying and fitting steel coupling bolts as per size and sample. each 8

14 Cost for repairinging of ratchet plate by doing CI welding, grinding & finishing and making 11 nos. sharp edges of proper size and sample by grinding machine. p/job 1

15 Cost for reassembling of pump accessories such as bowl mouth bush, impeller, pump shaft, etc in bowl housing in the work shop. p/job 1

16 Cost for supplying of nitrle rubber oil seal 100 x 130 x 13 Each 2

17 Cost for transportation of pump and its accessories from Rajapur Old pump house to workshop and back to pump house including all cost of labour charge for loading & unloading. p/job 1

18 Cost for scratching old paint of column pipe and discharge pipe and doing one coat primer with red oxide and painting two coats with black Japan paint. p/job 1

19 Cost for supplying and fitting SS bolts & nuts with plane & spring washers of size 20 mm dia.110 mm long for column pipes. Make - TVS each 48

20 Cost for supplying and fitting SS bolts & nuts with plane & spring washer of size 20 mm dia. X 85 mm long for bowl assembly. Make - TVS each 58

21 Cost for supplying and fitting SS bolts & nuts with plane & spring washer of different sizes 27 mm dia. X 130 mm long for bearing holder & delivery line. Make - TVS each 24

22 Cost for supplying and fitting rubber insertion sheet of size 1/8" thick (black) p/kg 25

23 Cost for fitting materials such as cotton waste - 10 kg, gland packing - 3 kg, emery paper- 12 sheets, K oil - 10 ltrs., etc required at the time of fitting of pump. p/job 1

24 Cost for supplying and filling mobil P/Ltr 30

25 Cost for fitting of pump accessories and lowering such as column pipe, bowl mouth assembly, discharge tee line shaft, all spider bushes, etc into the sump. p/job 1

26 Cost for placing of motor on its base, doing coupling of motor & pump, doing all electric connection of motor and testing the pump on load. p/job 1

27 Deduct : Cost of Scrap materials Bronze p/kg -25

28 Deduct : Cost of Scrap materials Stainless steel p/kg -10

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing labour, tools and tackles at site for opening all coupling bolts of 350 HP VT motor and pump and all the electrical connections of motor, taking down motor from its base by top lifting of motor from motor stool and stacking the motor at proper place. p/job 1

2 Cost for providing all labours, tools and tackles at site for opening and taking out discharge tee, column pipe, bowl mouth assembly, etc of 350 HP VT pump from sump. p/job 1

3 Cost for opening and dismantling of bowl mouth assembly of 350 HP VT pump, taking out pump shaft, upper & lower bowl mouth, impeller, upper and lower bushes, etc in workshop. p/job 1

4 Cost for checking of top shaft & line shaft on lathe for straightness and straightening the same on hydraulic press machine. each 3

5 Cost for remetalling & rethreading at both ends of top & line shaft upto 3" length. each 3

6 Cost for making and supplying line shaft bearing holder bronze bush of size ID 75 mm OD 90 mm Length 170 mm each 2

7 Cost for making and supplying stuffing box bronze bush of size ID 75 mm OD 90 mm Length 180 mm each 1

8 Cost for making and fitting of SS 416 threaded barrel shaft coupling by cutting and making internal thread of size ID 73 mm OD 105 mm Length 200 mm each 3

9 Cost for making and supplying under bowl top side bronze bush of size . ID 101 mm OD 117 mm Length 150 mm each 1

10 Cost for making and supplying bell mouth bronze bush of size ID 101 mm OD 114 mm Lebgth 350 mm each 1

11 Cost for making and supplying under bowl bottom side bronze bush of size ID 101 mm OD 112 mm Length 180 mm each 1

12 Cost for making, supplying and fitting SS 316 Key of size 120 mm long x 22 mm wide x 10 mm thick for impeller and coupling. each 2

13 Cost for making, supplying and fitting steel coupling bolts as per size and sample. each 6

14 Cost for repairinging of ratchet plate by doing CI welding, grinding & finishing and making 11 nos. sharp edges of proper size and sample by grinding machine. p/job 1

15 Cost for reassembling of pump accessories such as bowl mouth bush, impeller, pump shaft, etc in bowl housing in the work shop. p/job 1

16 Cost for supplying of nitrle rubber oil seal 100 x 130 x 13 Each 2

17 Cost for transportation of pump and its accessories from Rajapur Old pump house to workshop and back to pump house including all cost of labour charge for loading & unloading. p/job 1

18 Cost for scratching old paint of column pipe and discharge pipe and doing one coat primer with red oxide and painting two coats with black Japan paint. p/job 1

19 Cost for supplying and fitting SS bolts & nuts with plane & spring washer of different sizes 27 mm dia. X 130 mm long for bearing holder & delivery line. Make - TVS each 48

20 Cost for supplying and fitting SS bolts & nuts with plane & spring washer of size 20 mm dia. X 85 mm long for bowl assembly. Make - TVS each 72

21 Cost for supplying and fitting SS bolts & nuts with plane & spring washers of size 20 mm dia.110 mm long for column pipes. Make - TVS each 24

22 Cost for supplying and fitting rubber insertion sheet of size 1/8" thick (black) p/kg 25

23 Cost for fitting materials such as cotton waste - 8 kg, gland packing - 3 kg, emery paper- 12 sheets, K oil - 10 ltrs., etc required at the time of fitting of pump. p/job 1

24 Cost for supplying and filling mobil P/Ltr 20

25 Cost for fitting of pump accessories and lowering such as column pipe, bowl mouth assembly, discharge tee line shaft, all spider bushes, etc into the sump. p/job 1

26 Cost for placing of motor on its base, doing coupling of motor & pump, doing all electric connection of motor and testing the pump on load. p/job 1

27 Deduct : Cost of Scrap materials Bronze p/kg -27

28 Deduct : Cost of Scrap materials Stainless steel p/kg -12

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of VT motor & pump and all the electrical connections of motor, taking down motor from its base by top lifting of motor from motor base and stacking the motor at proper place. p/job 2

2 Cost for complete opening of VT motor part by part & taken out of top & bottom bearing from bearing houshing and repairing of bearing houshing with weilding with C.I electrode, turning, and finishing as required shape and size. p/job 2

3 Cost for greasing the bearing of motor and varnishing,heating & taping of enamelled copper winding wire including required materials like grease and varnish-6 lit.etc. p/job 2

4 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place etc. p/job 2

5 Cost for providing all labours, tools and tackles at site for fitting of VT motor on foundation base and refitting nut bolts & testing also. each 2

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for supplying and fitting of following for LT distribution Panel board of 350 HP pump :-

(i) Digital VAF + PF meter. Each 4

2 Cost for supplying and fitting followings for 2x350 HP starter for standby and pannel :-

(i) Cost of supplying & fitting of MNX 700 amp. contactor Each 3

(ii) Cost of supplying & fitting of MNX 550 amp. contactor Each 3

(iii) Cost for supply of timer 0-30 sec. type PCN KRTCN 11*0 for AC current Each 2

(vi) Cost for supply of lock with key for panel boards and starters. nos 6

(vi) Push bottom nos 2

(vii) Digital Amm meter nos 2

(vi) Digital volt meter nos 2

Cost for supplying of all labours skill tecnisian and tools of fitting of above spear startes, doing connection of cable and testing of load of side job 1

3 Cost for supplying and fitting followings in the FASD of starter of 350 HP pump sets are i. HRC Fuse - 06 nos. ii. MCCB 1000 amp - 2 nos iii. TP contactor 220 volt control-01 no. iv.ON/OFF Switch- 02 nos v. flat cable -01 viii.Relay meter ( control line) - 01, ix.Auto switch- 01,x. Relay meter (MPR) - 01 ,xi. single phase preventer- 01,xii. Four step self starting relay- 01,xiii. Amp volt control meter- 01, xiv.MCB- 04 way 63 amp - 01,xv. 63 amp single phase - 04 no. , xvi.2 amp - 6 no.xvii contractor model LC1E 1201, 4 pole 12 amp- 6 nos.xviii LED- 15 nos. xix 110 volt,LED - 06 nos, 440 volt including of supplying APFC panel as required capacity. P/Job. 2

4 Deduct : cost of scrap copper. P/kg -3

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing all labours tools and tackles at site for opening and dismantling of lifting gear unit mechanisms, cleaning with K. oil, greasing all the gears and resetting the same including all consumable materials such as K. oil, grease, cotton waste, mobil, etc and replacing all the bolts and nuts of TVS make. each 2

2 Cost for supplying all labours, tools and tackles at site for taking out damaged and broken wire rope of size 5/8" dia. and supplying and fitting new wire rope. p/m 10

3 Cost for supplying and fitting 'U' clamp suitable for fastening 5/8" dia. wire rope. each 6

4 Cost for supplying all labours, tools and tackles at site for lifting plate of flap valves from outlet and supplying and fitting 3/4" x 8" long steel pin shaft in flap valve. each 4

5 Cost for miscellaneous work such as closing leakages in flap valves caused due to floating materials in the valves with the help of diver before starting of pumping machineries during flood situation in Ganga river. p/job 1

6 Deduct : Cost of Scrap materials M.S. each -1

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing all technicians, tools and tackles at site for servicing of 498 HP diesel engine of VT pump no-3 and replacement of under noted spares. P/job 1

2 Lub Oil 5 ltr. Each 1

3 Lub Oil 20 ltr. Each 1

4 Lub oil filter Each 1

5 Fuel filter spin on P/kg 1

6 Fuel filtre 5 Ltr. With 'O' ring P/kg 1

7 Coolant 5 ltr. Each 1

8 Air filter set p/set 2

9 Fuel flexible pipe set P/kg 1

10 Set of hoses P/kg 1

11 NONC switch P/kg 1

13 Cost of repairing of the leakages of radiator by changing the damaged copper tubes or repairing by gas welding and changing of raditor frame , rubber pads atc all complete and testing on load. P/job 1

14 Cost towards supplying and fitting of 12 Volt 20 plate 1500 mAh capacity fully charged Exide or reputed make battery deducting the cost of old battery. Each 2

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 498 HP pump from motor and all electrical connection of motor and opening all nut and bolt of pump casing, bearing housing and taking out of bearing housing together with impeller coupling and pump shaft. P/job 1

2 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. P/job 1

3 Cost for remetalling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labours, tools & tackles etc. P/job 1

4 Cost for making, supply and fitting of bronze nush including cutting. Turning, polishing and finishing of size 100 mm ID x 122 mm OD x 220 mm Length Each 1

5 Cost for supply and fitting of S cylindercal roller bearing no. SKF 3322 A equivalent for 498 HP pump with GST, CP and Labour Cess. Each 2

6 Cost for supply and fitting of spherical Roller bearing no. SKF 3322 a equivalent for 498 HP Electric pump with GST,CP & labour cess etc Each 1

7 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. p/set 1

8 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. p/job 1

9 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. p/job 1

10 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. p/set 1

11 Cost for fitting consumable materials such as grease, gland packing 5/8", cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. p/job 1

12 Cost for supplying al labours, tools & tackles at size for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing on unload. P/job 1

13 Providing all labours, tools, tackles for installation of 498 HP C/F pump on foundation,refitting nut-bolt & testing on unload at DPS. P/job 1

14 Cost for supplying and fitting bolts and nuts of different sizes with washer including labours, tools & tackles. P/kg 10

15 Cost for supplying and fitting SS coupling bolt as per size and sample including labours, tools & tackles Each 10

16 Deduct: Cost of scrap materials stainless steel P/kg -2

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing all labours, tools and tackles at site for opening and dismantling of 400 Amp. AB switch such as male & female contact, knife type contact, cleaning & washing each component with petrol properly and resetting them all complete job. P/job 2

2 Cost for supplying & fitting following spares. :-

(i) Post insulator. Each 6

(ii.) Net fuse for 400 Amp. AB switch. (1 pcs =3 nos.) Each 2

(iii). Copper wire 6 SWG. P/kg 8

(iv). GI bolts & nuts with washer of different sizes P/kg 2

(v). Knife type male & female contact 11 kv 400 Amp. AB switch. ( 1 Pcs = 3 nos) Each 2

(vi) Lightening arrestor for 11 KV sub station p/set 3

(vii) Tinned copper fuse wire 20 no. P/kg 0.5

(viii) Rabit conductor for connection of main incoming feeder. P M 10

3 Cost for providing all labours, tools & tackles at site for supplying and laying 25 mm x 3 mm G.I. flat from lightening arrestor to the earth station including the cost of G.I. flat, G.I. bolts & nuts , etc all complete. P/kg 15

4 Cost for providing all labours, tools and tackles at site for opening and dismantling all electrical connections of HT and LT of 500 KVA transformer. P/job 2

5 Cost for opening the top cover and other equalizing pipes of transformer for fitting and tightening of HT & LT studs and draining of transformer oil and stacking of transformer oil in container. P/job 2

6 Cost for supplying and fitting following with GST, CP & Labour Cess :-

(i) LT stud of copper Each 6

(ii) LT bush Each 6

(iii) HT stud of copper Each 6

(iv) HT bush Each 6

(v) Rubberized gasket Each 6

(vi) Transformer oil P/ltr. 60

7 Cost for tightening of HT & LT studs, refilling of transformer oil and fitting of top cover with ruberised gasket and re-installing equalizing pipes, etc all complete work. P/job 2

8 Cost for filtration of transformer oil. (both transformers contain 555 ltrs.) P/ltr. 1050

9 Cost for PVC sleeving suitable to withstand 11 KV power supply for sleeving of 6 SWG jumpher wire p/mtr 30

10 Cost for doing cable socketing including the cost of 240 mm² cable socket and all requisite insulating materials such as glass tape, PVC tape, empire Tape, etc. Each 24

11 Cost for providing all materials such as cable gland, cable clamp, G.I. pipe, labours tools and tackles at site for laying of cable from transformers to panel boards for connection with ACBs of panel boards. P M 100

12 Deduct : Cost of Scrap materials Copper P/kg -10

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for supplying all labours, tools and suitable tackles for cleaning and desiliting of filled and choked sump tank, approach channel and inlet chamber etc of different pumping station and to lift and disposal of all soils and foreign materials all complete as per specification and direction of E/I at site. p/m³ 282.38

(ii) Inlet chamber –

(iii) Approach channel –

(iv) Outlet channel –

2 Supplying all labours, tools and tackles for cleaning and extracting floating materials from the approach channel and bye pass drain outlet channel etc. P/m² 326.36

(i) Approach channel –

(ii) Outlet channel –

(iii) By Pass drain

3 Cost for providing all materials , tools for making diversion bandh near bye pass drain with help of sand filled Plastic bags and placing the sand in proper stake and making water tight to divert the flow of water for desilting etc all complete as per direction of E.I. in pumping plant . p/bag 292

4 Labour charge for taking out sand bags from drain of sump after desilting of bandh after the completion of desilting work in Antaghat pumping plant. p/bag 292

5 Cost for supplying all labour, tools, tackles at site for lift and disposal of soils and foreign materials to a lead of 15 KM all complete with loading and unloading charge all complete. (70% of silt taken out) P/m³ 197.6

Gr-06 (2) Estimate for the work of Annual Repairing, maintenance & operation of electro-mechanical accessorries of the pump sets installed in storm drainage pumping plant at Rajapur new monsoon 2026 for the Year 2026-27.

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for Complete repairing and overhauling of 425 HP VT pump set as per annexure-1 P/job 1

2 Cost for Complete repairing and overhauling of 425 HP VT pump set as per annexure-2 P/job 1

3 Cost for Complete repairing and overhauling of 350 HP VT pump set as per annexure-3 P/job 1

4 Cost for Complete repairing and overhauling of 220 HP VT pump set as per annexure-4 P/job 1

5 Cost for servicing of panel boards rotor controller starter and OCB of 350 HP VT pump set and servicing of panel board, starter of 2x425 HP & 1 x 220HP VT pump set as per annexure-5 P/job 1

6 Cost for cleaning, servicing, greasing and repairing of flap valve as per annexure-6 . P/job 1

7 Cost for servicing & filteration of T- oil of 1 x 500 KVA & 3 x 800 KVA out door transformers as per annexure-7 P/job 1

8 Cost for servicing, cleaning, greasing and repairing of AB switch and DP structure of 11 KV electric substation as per annexure-8 P/job 1

9 Cost for cleaning and Desilting of sumps as per annexure-9 P/job 1

10 Cost for Providing & installation of New water level Gauge as per direction of Engineer-in-charge . P/Job 1

11 Cost for Making Bamboo gratings of size 12'x12'-08 nos.(approx) made of 12' (approx) long 2.5'' dia bamboo with gap of 2.5'', with nails ans S.S. wire for fixing and installation in the sumps inlet at storm Drainage Pumping Plant, as Per annexture-10 P/Job 1

12 Cost for Providing & Installation of New M.S gratings (Double Coat painting)with required size & Shape of M.S Channel & M.S Flat (Thick 10 mm)as Per Direction of Engineer- in -Charge at storm Drainage Pumping Plant. P/Job 1

13 Cost for Complete Reparing ,Overhauling ,Servicing & Functionlity of 10 Ton Manual Chain pulley block Over head crane mounted on DPS as Per Direction of Engineer-in-Charge. P/Job 1

14 Earthing with copper earth plate 600mmx600mmx3mm thick imcluding accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. (but without charcoal/coke and salt as required)(BCD SOR 3.5) P/Job 4

15 Cost for Deployment of 6 nos. x 3 shifts sweepers for removing floating materials from sump, cleaning the premises, taking out the garbages from pump impeller and miscellaneous work during the monsoon period 1st june 2026 to 15th Oct 2026 and during rest period 02 no. x 1 shift from 01.4.2026 to 31.05.2026 & 16th Oct.2026 to 31.03. 2027 ..(The no. of sweeper may increase as per situation arisen due to heavy rain fall). shift 2922

16 Cost for Deployment of 2 nos. x 3 shifts Highly skilled technician cum pump operators during the monsoon period 1st june 2026 to 15th Oct 2026 and during rest period 01 no. x 3 shift from 01.4.2026 to 31.05.2026 & 16th Oct.2026 to 31.03. 2027 (The no. of pump operators may increase as per situation arisen due to heavy rain fall). shift 1506

17 Cost for Providing & Laying of 240 Sq.mm 3.5 core copper armoured Cable for 2x350 HP starter to motor with required Jointing kit as per Direction of Engineer -In Charge (make - KEI/Polycab/Havells). Per m 10

18 Cost for Providing & Laying of 240 Sq.mm 3.5 core aluminium armoured Cable for 2x350 HP starter to motor with required Jointing kit as per Direction of Engineer -In Charge (make - KEI/Polycab/Havells). Per m 40

19 Cost for rep. of slippring unit and rotor controller starter S/F of terminal point, connection lead, carbon brush and carbon holder & of 1x 350 HP VT pump etc. each 1

20 Maintenance of miscllanious work of all Electro machineries for the period of (01.04.2026 to 31.03.2027) at DPS. The Bidder shall be totally responsible for Proper Functioning of DPS with immediate minor & major work repairing like burning of motor, transformer,Maintenance of new supply pump & transformer per annum, panel, starters, bearing replacing, Cleaning of Campus, Sprinkling of Bleaching Powder, Pump operation, Functionality of Sluice gate & any other equipments installed or to be install should be Functional in this DPS, , proper flood light, fan, chair, rubber mat, Log book ABC store press ( 4 kg - 02 nos)& Carbon dioxide (4 kg- 02 nos.) type fire extingusher required for safety purpose, Spray Painting, misc type of all civil releted work, light wiring, exhaust fan,Name plate of buidco.wall painting, Recharge of CCtv ,availability of 24 hrsx 365 days in sufficient quantity of saftey materials,black stone (ballast) transportation and loading, unloading of any equipment/material, repairing of Civil structure during emergency for water draining as per Direction of E/I. Payment will be made only if work other than the above 19 items is done. P/Job 1

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing labour, tools and tackles at site for opening all coupling bolts of 425 HP VT motor and pump and all the electrical connections of motor, taking down motor from its base by top lifting of motor from motor stool and stacking the motor at proper place. p/job 1

2 Cost for providing all labours, tools and tackles at site for opening and taking out discharge tee, column pipe, bowl mouth assembly, etc of 425 HP VT pump from sump p/job 1

3 Cost for opening and dismantling of bowl mouth assembly of 425 HP VT pump, taking out pump shaft, upper & lower bowl mouth, impeller, upper and lower bushes, etc in workshop. p/job 1

4 Cost for checking of pump shaft, head shaft & line shaft on lathe for straightness and straightening the same on hydraulic press machine. each 3

5 Cost for remetalling & rethreading at both ends of pump & line shaft. each 4

6 Cost for making and supplying line shaft bronze bush of size ID 81 m OD 95 mm Length 175 mm each 2

7 Cost for making and supplying stuffing box bronze bush of size ID 81 mm OD 95 mm Length 175 mm each 1

8 Cost for making and fitting of SS 416 shaft coupling by cutting and making internal thread of size ID 78 mm OD 115 mm Length 220 mm each 2

9 Cost for making and supplying lower bearing bush for discharge bowl of size ID 100 mm OD 118 mm Length 180 mm p/job 1

10 Cost for making and supplying upper discharge bowl bearing bush of size ID 100 mm OD 117 mm Length 140 mm p/job 1

11 Cost for making M.S. check nut of size 140 mm OD x 80 mm ID x 80 mm long. each 1

12 Cost for making, supplying and fitting SS 316 Key of size 120 mm long x 22 mm wide x 10 mm thick for impeller and coupling. each 2

13 Cost for making, supplying and fitting steel coupling bolts as per size and sample. each 16

14 Cost for repairing of ratchet plate by doing CI welding, grinding & finishing and making 11 nos. sharp edges of proper size and sample by grinding machine p/job 1

15 Cost for reassembling of pump accessories such as bowl mouth bush, impeller, pump shaft, etc in bowl housing in the work shop. p/job 1

16 Cost for transportation of pump and its accessories from Rajapur New pump house to workshop and back to pump house including all cost of labour charge for loading & unloading. p/job 1

17 Cost for scratching old paint of column pipe and discharge pipe and doing one coat primer with red oxide and painting two coats with black Japan paint. p/job 1

18 Cost for supplying and fitting SS bolts & nuts with washer of different sizes. each 15

19 Cost for supplying and fitting rubber insertion sheet of size 1/8" thick (black) p/kg 40

20 Cost for supplying and fitting of roller bearing SKF- 29324 M each 1

21 Cost for supplying and fitting ball bearing SKF- 6040 each 1

22 Cost for fitting materials such as cotton waste - 8 kg, gland packing - 2 kg, emery paper- 10 sheets, K oil - 8 ltrs., etc required at the time of fitting of pump. p/job 1

23 Cost for supplying and filling mobil P/Ltr 20

24 Cost for fitting of pump accessories and lowering such as column pipe, bowl mouth assembly, discharge tee line shaft, all spider bushes, etc into the sump. p/job 1

25 Cost for placing of motor on its base, doing coupling of motor & pump, doing all electric connection of motor and testing the pump on load. p/job 1

26 Deduct : Cost of Scrap materials Bronze p/kg -14

27 Deduct : Cost of Scrap materials Stainless steel p/kg -25

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing labour, tools and tackles at site for opening all coupling bolts of 425 HP VT motor and pump and all the electrical connections of motor, taking down motor from its base by top lifting of motor from motor stool and stacking the motor at proper place. p/job 1

2 Cost for providing all labours, tools and tackles at site for opening and taking out discharge tee, column pipe, bowl mouth assembly, etc of 425 HP VT pump from sump p/job 1

3 Cost for opening and dismantling of bowl mouth assembly of 425 HP VT pump, taking out pump shaft, upper & lower bowl mouth, impeller, upper and lower bushes, etc in workshop. p/job 1

4 Cost for checking of pump shaft, head shaft & line shaft on lathe for straightness and straightening the same on hydraulic press machine. each 3

5 Cost for remetalling & rethreading at both ends of pump & line shaft. each 4

6 Cost for making and supplying line shaft bronze bush of size ID 81 mm OD 95 mm Length 175 mm each 2

7 Cost for making and supplying stuffing box bronze bush of size ID 81 mm OD 95 mm Length 175 mm each 1

8 Cost for making and fitting of SS 416 shaft coupling by cutting and making internal thread of size ID 78 mm OD 115 mm Length 220 mm each 2

9 Cost for making and supplying lower bearing bush for discharge bowl of size ID 100 mm OD 118 mm Length 180 mm p/job 1

10 Cost for making and supplying upper discharge bowl bearing bush of size ID 100 mm OD 117 mm Length 140 mm p/job 1

11 Cost for making M.S. check nut of size 140 mm OD x 80 mm ID x 80 mm long. each 1

12 Cost for making, supplying and fitting SS 316 Key of size 120 mm long x 22 mm wide x 10 mm thick for impeller and coupling. each 2

13 Cost for making, supplying and fitting steel coupling bolts as per size and sample. each 16

14 Cost for repairing of ratchet plate by doing CI welding, grinding & finishing and making 11 nos. sharp edges of proper size and sample by grinding machine. p/job 1

15 Cost for reassembling of pump accessories such as bowl mouth bush, impeller, pump shaft, etc in bowl housing in the work shop. p/job 1

16 Cost for transportation of pump and its accessories from Rajapur New pump house to workshop and back to pump house including all cost of labour charge for loading & unloading. p/job 1

17 Cost for scratching old paint of column pipe and discharge pipe and doing one coat primer with red oxide and painting two coats with black Japan paint. p/job 1

18 Cost for supplying and fitting SS bolts & nuts with washer of different sizes. each 20

19 Cost for supplying and fitting rubber insertion sheet of size 1/8" thick (black). p/kg 40

20 Cost for supplying and fitting of roller bearing SKF- 29324 M each 1

21 Cost for supplying and fitting ball bearing SKF- 6040 each 1

22 Cost for fitting materials such as cotton waste - 8 kg, gland packing - 2 kg, emery paper- 10 sheets, K oil - 8 ltrs., etc required at the time of fitting of pump. p/job 1

23 Cost for supplying and filling mobil. P/Ltr 20

24 Cost for fitting of pump accessories and lowering such as column pipe, bowl mouth assembly, discharge tee line shaft, all spider bushes, etc into the sump. p/job 1

25 Cost for placing of motor on its base, doing coupling of motor & pump, doing all electric connection of motor and testing the pump on load. p/job 1

26 Deduct : Cost of Scrap materials Bronze p/kg -13

27 Deduct : Cost of Scrap materials Stainless steel p/kg -22

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing labour, tools and tackles at site for opening all coupling bolts of 350 HP VT motor and pump and all the electrical connections of motor, taking down motor from its base by top lifting of motor from motor stool and stacking the motor at proper place. p/job 1

2 Cost for providing all labours, tools and tackles at site for opening and taking out discharge tee, column pipe, bowl mouth assembly, etc of 350 HP VT pump from sump p/job 1

3 Cost for opening and dismantling of bowl mouth assembly of 350 HP VT pump, taking out pump shaft, upper & lower bowl mouth, impeller, upper and lower bushes, etc in workshop. p/job 1

4 Cost for checking of pump shaft, head shaft & line shaft on lathe for straightness and straightening the same on hydraulic press machine. each 3

5 Cost for remetalling & rethreading at both ends of line shaft. each 3

6 Cost for supply and fitting O ring of different size p/mt 40

7 Cost for making , supply and fitting line shaft bronze bush of size ID 81 mm OD 95 mm Length 155 mm each 2

8 Cost for making and supplying stuffing box bronze bush of size ID 81 mm OD 95 mm Length 175 mm each 1

9 Cost for making and fitting of SS 416 shaft coupling by cutting and making internal thread of size ID 75 mm OD 100 mm Length 180 mm each 1

10 Cost for making and supplying upper bearing bush for discharge case of size ID 81 mm OD 96 mm Length 90 mm p/job 1

11 Cost for making and supplying lantern ring of size ID 81 mm OD 115 mm Length 42 mm p/job 1

12 Cost for supply and fitting of SS 416 pump shaft sleeve each 1

13 Cost for supply and fitting of distance sleeve as per sample and size each 1

14 Cost for supply and fitting of bearing bush for bearing housing each 1

15 Cost for supplying and fitting following :-

(i) Stuffing box packing. each 1

(ii) Key for shaft sleeve. each 1

(iii) Key for pump shaft. each 1

(iv) Rubber coupling bush. each 1

(v) Steel coupling bolts. each 6

(vi) Ratchet pin SS 410 each 6

16 Cost for repairing of ratchet plate by doing CI welding, grinding & finishing and making 12 nos. sharp edges of proper size and sample by grinding machine. p/job 1

17 Cost for reassembling of pump accessories such as bowl mouth bush, impeller, pump shaft, etc in bowl housing in the work shop. p/job 1

18 Cost for transportation of pump and its accessories from Rajapur New pump house to workshop and back to pump house including all cost of labour charge for loading & unloading. p/job 1

19 Cost for scratching old paint of column pipe and discharge pipe and doing one coat primer with red oxide and painting two coats with black Japan paint. p/job 1

20 Cost for supplying and fitting SS bolts & nuts with washer of different sizes. each 96

21 Cost for supplying and fitting rubber insertion sheet of size 1/8" thick (black). p/kg 20

22 Cost for supplying and fitting of roller bearing SKF- 29324 M each 1

23 Cost for supplying and fitting ball bearing SKF- 6040 each 1

24 Cost for fitting materials such as cotton waste - 5 kg, grease -3 kg gland packing - 2 kg, emery paper- 10 sheets, K oil - 8 ltrs. etc required at the time of fitting of pump. p/job 1

25 Cost for supplying and filling mobil. P/Ltr 10

26 Cost for fitting of pump accessories and lowering such as column pipe, bowl mouth assembly, discharge tee line shaft, all spider bushes, etc into the sump. p/job 1

27 Cost for placing of motor on its base, doing coupling of motor & pump, doing all electric connection of motor and testing the pump on load. p/job 1

28 Deduct : Cost of Scrap materials Bronze p/kg -8

29 Deduct : Cost of Scrap materials Stainless steel p/kg -16

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing labour, tools and tackles at site for opening all coupling bolts of 220 HP VT motor and pump and all the electrical connections of motor, taking down motor from its base by top lifting of motor from motor stool and stacking the motor at proper place. p/job 1

2 Cost for providing all labours, tools and tackles at site for opening and taking out discharge tee, column pipe, bowl mouth assembly, etc of 220 HP VT pump from sump p/job 1

3 Cost for opening and dismantling of bowl mouth assembly of 220 HP VT pump, taking out pump shaft, upper & lower bowl mouth, impeller, upper and lower bushes, etc in workshop. p/job 1

4 Cost for checking of pump shaft, head shaft & line shaft on lathe for straightness and straightening the same on hydraulic press machine. each 4

5 Cost for remetalling & rethreading at both ends of pump & line shaft. each 4

6 Cost for making and supplying line shaft bronze bush of size ID 63 mm OD 72 mm Length 125 mm each 2

7 Cost for making and supplying stuffing box bronze bush of size ID 63 mm OD 75 mm Length 125 mm each 1

8 Cost for making and fitting of SS 416 shaft coupling by cutting and making internal thread of size ID 59 mm OD 85 mm Length 170 mm each 3

9 Cost for making and supplying lower bearing bush for discharge bowl of size ID 69 mm OD 82 mm Length 200 mm p/job 1

10 Cost for making, supplying and fitting SS 316 Key as per sample and size for impeller and coupling. each 3

11 Cost for making, supplying and fitting steel coupling bolts as per size and sample. each 10

12 Cost for repairing of ratchet plate by doing CI welding, grinding & finishing and making 11 nos. sharp edges of proper size and sample by grinding machine p/job 1

13 Cost for reassembling of pump accessories such as bowl mouth bush, impeller, pump shaft, etc in bowl housing in the work shop. p/job 1

14 Cost for transportation of pump and its accessories from Rajapur New pump house to workshop and back to pump house including all cost of labour charge for loading & unloading. p/job 1

15 Cost for scratching old paint of column pipe and discharge pipe and doing one coat primer with red oxide and painting two coats with black Japan paint. p/job 1

16 Cost for supplying and fitting SS bolts & nuts with washer of different sizes. each 144

17 Cost for supplying and fitting rubber insertion sheet of size 1/8" thick (black) p/kg 25

18 Cost for fitting materials such as greese- 4 kg, cotton waste - 5 kg, gland packing - 2 kg, emery paper- 10 sheets, K oil - 5 ltrs. etc required at the time of fitting of pump. p/job 1

19 Cost for supplying and filling mobil P/Ltr 12

20 Cost for fitting of pump accessories and lowering such as column pipe, bowl mouth assembly, discharge tee line shaft, all spider bushes, etc into the sump. p/job 1

21 Cost for placing of motor on its base, doing coupling of motor & pump, doing all electric connection of motor and testing the pump on load. p/job 1

22 Cost for supplying of 'O' ring of different sizes made of neoprene rubber as per sample. each 14

23 Cost for supplying of rachet pin each 4

24 Deduct : Cost of Scrap materials Bronze p/kg -11

25 Deduct : Cost of Scrap materials Stainless steel p/kg -30

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing all labours tools and tackles at site for servicing LT distribution panel board by decarbonising its all contact joints, bushes washing with petrol, proper insulating of cable terminal with requisite kind of tapes and repair its all internal wiring of VT pump set. P/Job. 1

2 Cost for opening and taking out old slip ring unit from motor and washing all the components of slipring unit such as carbon holder carbon brush, etc. P/job. 1

3 Cost for supplying & fitting following :-

(i) Carbon holder Each 5

(ii) Carbon brush Tr-V Each 10

(iii) Round bakelite tube 1'-3" long Each 3

(iv) Heat proof glass wire of size 70 mm² for slip ring unit 2 mtrs. Long P/M 6

(v) Slip ring for 350 HP pump set Each 1

4 Cost for providing all labours, tools and tackles and experienced electrician at site for opening of rotor controller starter and OCB of 350 HP VT pump set. P/Job. 1

5 Cost for supplying, fitting and replacing of following damaged spares of rotor controller starter and OCB of 350 HP VT pump set. :-

A - Rotor controller starter

(i) Fixed copper contact. Each 6

(ii) Moving copper contact Each 6

(iii) Half round copper contact Each 4

(i) Fixed copper contact 'A' Each 6

(ii) Fixed copper contact 'B' Each 6

(iii)Moving copper contact Each 6

(iv)V'- bar copper contact Each 3

(v) Arcing copper contact for 'V' - bar Each 6

6 Cost for supplying and fitting of following for LT distribution Panel board of 350 HP pump :-

(i) Volt metre (0-500) Volt. Each 1

(ii) Ampere Metre (0-1000) Amp Each 1

(iii) CT coil 1000/5 Each 3

(iv) LED pilot lamp standard 24-240 V AC/DC Colour R/Y/G/A Each 4

(v) Selector switch for Amp. & Volt meters Each 2

(vi) Cost for supplying & filling transformer oil in the rotor controller P/ltrs. 20

7 Cost for doing cable socketing of heat proof cable with copper cable socket and required insulating materials. Each 6

8 Cost for cutting and removing old and damaged aluminium cable socket of panel board, rotor controller starter, MCCB, ACB & motor and doing cable socketing of 240 mm² cable including the cost of cable socket and required insulating materials. Each 24

9 Cost for providing all labours, tools & tackles at site for opening & dismantling all internal wiring, copper bus bars of 1 x 220 HP pump sets panel board, removing dust and vermins by blowing machine, cleaning and washing all the internal joints & components with petrol and greasing them properly and resetting, all complete job. P/job 1

10 Cost for providing all labours, tools & tackles at site for opening & dismantling all internal wiring, copper bus bars of 2 x 425 HP pump sets panel board, removing dust and vermins by blowing machine, cleaning and washing all the internal joints & components with petrol and greasing them properly and resetting, all complete job. P/job 2

11 Cost for supplying and fitting following in the 425 HP pump set panel:

(i) CT coil 500/5 Each 3

(ii) CT Coil 1000/5 Each 6

(iii) LED pilot lamp standard 12-240 V AC Colour R/Y/G/A Each 8

(iv) 3Ph VAF + PF, Class 1, 1A Each 3

(v) Push Button ON / OFF Switch Each 2

12 Cost for providing all labours, tools suitable tackles & an electrician for opening and dismantling the starters of 1 x 220 HP pump sets by opening and dismantling all the contactors, timer, overload relay, etc, cleaning the starter by blowing air to remove dust & vermins, washing all the components with petrol, resetting the starter by replacing burnt & damaged contactors and their accessories, tapping all the bus bars by rapping pvc tape including the cost of pvc tape , petrol etc. all complete job. P/job 1

13 Cost for supplying & fitting following for 220 HP starter :-

(i) Cost for supply of LC1FDP300A contactor for delta connection. Make - C&S . Each 1

(ii) Thermal overload relay with relay setting range 315-500 Amp. LR1F500. Make - C&S Each 1

(iii) Timer TA2DS2 (0-30 SEC) Make - C&S Each 1

14 Cost for complete repairing and changing of spare parts of APFC panel ( 7% reactor) are 200 KVAR- 01 no , TP 50 KA 800 amp MCCB- 1 no , C.T coil - 600/5 amp - 03 no. MCB 32 amp(TP) - 3 no. Wire 2.5 sq. mm - 01 coil, Power controller - 01 no. , Rotary handle - 01 no, speader - 01 set etc for proper controlling of power factor and also preventing power losses from transformer. Each 1

15 Cost for providing all labours, tools, suitable tackles and an electrician for opening and dismantling of 1000 Amp. ACB of 2x425 HP pump sets, cleaning all the moving & fixed contacts with petrol and greasing them properly as well as setting the male & female contacts and replacing burnt bakelite terminals, all complete job. P/job. 2

16 Cost for supplying and fitting followings in the soft starter of 350 HP pump sets are i. HRC Fuse - 06 nos. ii. MCCB 1000 amp - 2 nos iii. TP contactor 220 volt control-01 no. iv.ON/OFF Switch- 02 nos v. soft starter control kit - 01 vi. Soft starter display kit board - 01 vii. soft starter display cable 29 p/38 p flat cable -01 viii.Relay meter ( control line) - 01, ix.Auto switch- 01,x. Relay meter (MPR) - 01 ,xi. single phase preventer- 01,xii. Four step self starting relay- 01,xiii. Amp volt control meter- 01, xiv.MCB- 04 way 63 amp - 01,xv. 63 amp single phase - 04 no. , xvi.2 amp - 6 no.xvii contractor model LC1E 1201, 4 pole 12 amp- 6 nos.xviii LED- 15 nos. xix 110 volt,LED - 06 nos, 440 volt p/job 1

17 Cost for providing all labours, tools suitable tackles & an electricians for opening and dismantling the starters of 2 x 425 HP pump sets by opening and dismantling all the contactors, timer, overload relay, etc, cleaning the starter by blowing air to remove dust & vermine, washing all the components with petrol, resetting the starter by replacing burnt & damaged contactors and their accessories, tapping all the bus bars by rapping pvc tape including the cost of pvc tape & petrol, etc. all complete job. P/job 2

18 Cost for supply of followings for starers of 2 x 425 HP pump sets with 10% CP & 1% Labour Cess. :-

(i) Contactor MNX 650 Each 1

(ii) AC coil of MNX650 & MNX 550 Amp. Contactors. Each 1

(iii) AC coil of LC1FDP500A. Contactors. Each 1

(iv) Cost for supply of overload relay with 630-1000 Amp. LR1F1000. Make - C&S Each 2

(v) Cost for supply of timer 0-30 sec. type PCN KRTCN 11*0 for AC current make - BCH Each 2

19 Cost for cutting and removing old and damaged Copper & aluminium cable socket of panel board & starters and doing cable socketing of 240 mm² cable of 2 x425 HP & 1 x 220 HP panel & starters including the cost of cable socket and required insulating materials Each 27

20 Deduct : Cost of Scrap materials Copper P/Kg -4

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing all labours tools and tackles at site for opening and dismantling of lifting gear unit mechanisms, cleaning with K. oil, greasing all the gears and resetting the same including all consumable materials such as K. oil, grease, cotton waste, mobil, etc and replacing all the bolts and nuts of TVS make. Each 15

2 Cost for supplying all labours, tools and tackles at site for taking out damaged and broken wire rope of size 5/8" dia. and supplying and fitting new wire rope. P/M 75

3 Cost for supplying and fitting 'U' clamp suitable for fastening 5/8" dia. wire rope. Each 12

4 Cost for supplying all labours, tools and tackles at site for lifting plate of flap valves from outlet and supplying and fitting 3/4" x 8" long steel pin shaft in flap valve. Each 6

5 Cost for miscellaneous work such as closing leakages in flap valves caused due to floating materials in the valves with the help of diver before starting of pumping machineries during flood situation in Ganga river. P/job. 1

6 Deduct : Cost of Scrap materials M.S. P/Kg -8

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing all labours, tools and tackles at site for opening and dismantling all electrical connections of HT and LT of 500 KVA transformer. P/job 4

2 Cost for opening the top cover and other equalizing pipes of transformer for fitting and tightening of HT & LT studs and draining of transformer oil and stacking of transformer oil in container. P/job 4

3 Cost for supplying and fitting following :-

(i) LT stud of copper Each 12

(ii) LT bush Each 12

(iii) HT stud of copper Each 10

(iv) HT bush Each 10

(v) Rubberized gasket Each 4

(vi) Transformer oil P/ltr. 90

4 Cost for tightening of HT & LT studs, refilling of transformer oil and fitting of top cover with ruberised gasket and re-installing equalizing pipes, etc all complete work. P/job 4

5 Cost for filtration of transformer oil.(both transformers contain 470 ltrs.) P/ltr. 1500

6 Cost for PVC sleeving suitable to withstand 11 KV power supply for sleeving of 6 SWG jumpher wire p/mtr 60

7 Cost for doing cable socketing including the cost of 300 mm² cable socket and all requisite insulating materials such as glass tape, PVC tape, empire Tape, etc. Each 60

8 Cost for cutting and removing old and damaged cable socket of LT cable of transformer and doing cable socketing including the cost of 240 mm² cable socket and all requisite insulating materials such as glass tape, PVC tape, empire Tape, etc. Each 62

9 Deduct : Cost of Scrap materials Copper P/kg -4

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing all labours, tools and tackles at site for opening and dismantling of 400 Amp. AB switch such as male & female contact, knife type contact, cleaning & washing each component with petrol properly and resetting them all complete job. P/job 4

2 Cost for supplying & fitting following spares. :-

i. Post insulator. Each 12

ii. Bus bar insulator. Each 36

iii. Horn gap fuse. ( 1 pcs = 3 nos.) Each 4

iv. Net fuse for 400 Amp. AB switch. (1 pcs =3 nos.) Each 4

v. Copper wire 6 SWG. P/kg 12

vi. GI bolts & nuts with washer of different sizes P/kg 12

vii. Knife type male & female contact for 400 Amp. AB switch. ( 1 Pcs = 3 nos) Each 4

viii. Bus bar socket 1" dia. size. Each 15

ix. Bus bar T-connector 1" dia. size. Each 12

x Aluminium pipe of dia 1'' suitable for 11KV electric supply p/mtr 30

xi Lightening arrestor for 11 KV sub station p/set 6

xii Fuse wire 19 no. P/kg 1.5

xiii Rabit conductor for connection of main incoming feeder. P M 20

3 Cost for providing all labours tools and tackles at site for supplying of new 400 Amp. 11 KV grade AB switch for fitting on DP of main incoming feeder. Each 4

4 Cost for providing all labours tools and tackles at site for supplying of new 600 Amp. 11 KV grade AB switch for fitting on DP of main incoming feeder. Each 2

5 Cost for providing all labours, tools & tackles at site for opening and taking out old and damaged AB switch of main incoming feeder from DP and fitting, fixing anmd testing new AB switch. P/jobS 4

6 Cost for supply of 2 nos. M.S. channel of size 75 mm x 40 mm x 2.5 M for fitting of lightening arrestor. P/kg 35

7 Cost for supply of clamps for fitting the channel on DP. Each 6

8 Cost for supply of M.S. clamp for fitting of lightening arrestor & 600 Amp. AB switch on M.S. channel. Each 5

9 Cost for providing all labours, tools & tackles at site for fitting and fixing the lightening arrestor on DP by making three nos. hole in the channel, fitting the lightening arrestor on M.S. channel with clamps, fitting the M.S. channel on DP with clamp, all complete work. P/job 2

10 Cost for supply of 11 KV discharge rod Each 6

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for supplying all labours, tools and suitable tackles for cleaning and desiliting of filled and choked sump tank, approach channel and inlet chamber etc of different pumping station and to lift and disposal of all soils and foreign materials all complete as per specification and direction of E/I at site. p/m³ 522

(ii) Inlet chamber

(iii) Approach channel

Underground outfall drain joining River Ganga & Rajapur new pumping plant outfall

2 Supplying all labours, tools and tackles for cleaning and extracting floating materials from the approach channel and bye pass drain outlet channel etc. p/m² 551.75

(ii) By Pass drain

(iii) Approach channel

(iv) Outlet channel

3 Cost for providing all materials , tools for making diversion bandh near bye pass drain with help of sand filled Plastic bags and placing the sand in proper stake and making water tight to divert the flow of water for desilting etc all complete as per direction of E.I. in Rajapur new pumping plant . p/bag 292

4 Labour charge for taking out sand bags from drain of sump after desilting of bandh after the completion of desilting work in Rajapur new pumping plant. p/bag 292

5 Cost for supplying all labour, tools, tackles at site for lift and disposal of soils and foreign materials to a lead of 15 KM all complete with loading and unloading charge all complete. (70% of silt taken out) p/m³ 365.4

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for making and supplying bamboo gratings of size 12" long made of half 12' long x 2.5" dia. Bamboo having gaps of 2.5" between two consecutive bamboos including labours, tools & tackles. Each 8

2 Cost for M.S. Wirse for fastening of bamboo gratings into sump. P/Kg 10

3 Cost for providing all labours, tools and tackles at site for fitting, fixing and binding bamboo gratings into sump. Each 10

Gr-06 (3) Estimate for the work of Annual Repairing, maintenance & operation of electro-mechanical accessorries of the pump sets installed in storm drainage pumping plant at Mandiri old monsoon 2026 for the Year 2026-27.

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Complete repairing and overhauling of 350 HP VT pump set no.1 as per Annexure-1 Per job 1

2 Complete repairing and overhauling of 175 HP VT pump set no.2 as per Annexure-2 Per job 1

3 Cost for Repairing and overhauling of 2 nos electric motors by dismantaling the motors, double coat varnishing, heating, loop repairing, replacement of the damaged bearing, assembling with all required consumable materials and testing on load as per Annexure-03 P/Job 1

4 Cost for repairing & servicing of panel boards and starter of 1X 350 HP & 1x 175 HP VT pump set as per Annexure-4 Per job 1

5 Cost for servicing & filteration of T- oil of 1 x 300 KVA & 1x 500 KVA out door transformers as per Annexure-5 Per job 1

6 Cost for servicing, cleaning, greasing and repairing of AB switch and DP structure of 11 KV electric substation as per Annexure-6 Per job 1

7 Cost for complete repairing and servicing of 198 HP diesel Engine as per Annexure-7 Per job 1

8 Complete repairing and overhauling of 198 HP diesel engine pump set and its accessories (As per Annexure-8) P/Job 1

9 Cost for cleaning and Desilting of . sumps as per Annexure-9 Per job 1

10 Cost for Making Bamboo gratings of size 12'x12'-08 nos.(approx) made of 12' (approx) long 2.5'' dia bamboo with gap of 2.5'', with nails ans S.S. wire for fixing and installation in the sumps inlet at storm Drainage Pumping Plant as Per Annexure-10 P/Job 1

11 Cost for Providing & Laying of 185 Sq.mm 3.5 core copper armoured Cable for pump (if required) starter to motor with required Jointing kit as per Direction of Engineer -In Charge (make - KEI/Polycab/Havells). Per m 10

12 Cost for Complete Reparing ,Overhauling ,Servicing & Functionlity of 10 Ton Manual Chain pulley block Over head crane mounted on DPS as Per Direction of Engineer-in-Charge. P/Job 1

13 Cost for Providing & Installation of New M.S gratings (Double Coat painting)with required size & Shape of M.S Channel & M.S Flat (Thick 10 mm)as Per Direction of Engineer- in -Charge at storm Drainage Pumping Plant. P/Job 1

14 Cost for cleaning, servicing, greasing and repairing of flap valve as per annexure-11 P/job 1

15 Earthing with copper earth plate 600mmx600mmx3mm thick imcluding accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. (but without charcoal/coke and salt as required)(BCD SOR 3.5) Per job 2

16 Cost for Deployment of 4 nos. x 3 shifts sweepers for removing floating materials from sump, cleaning the premises, taking out the garbages from pump impeller and miscellaneous work during the monsoon period 1st june 2026 to 15th Oct 2026 and during rest period 02 no. x 1 shift from 01.4.2026 to 31.05.2026 & 16th Oct.2026 to 31.03. 2027 ..(The no. of sweeper may increase as per situation arisen due to heavy rain fall). shift 2100

17 Cost for Deployment of 2 nos. x 3 shifts Highly skilled technician cum pump operators during the monsoon period 1st june 2026 to 15th Oct 2026 and during rest period 01 no. x 3 shift from 01.4.2026 to 31.05.2026 & 16th Oct.2026 to 31.03. 2027 (The no. of pump operators may increase as per situation arisen due to heavy rain fall). shift 1506

18 Maintenance of miscllanious work of all Electro machineries for the period of (01.04.2026 to 31.03.2027) at DPS. The Bidder shall be totally responsible for Proper Functioning of DPS with immediate minor & major work repairing like burning of motor, transformer,Maintenance of new supply pump & transformer per annum, panel, starters, bearing replacing, Cleaning of Campus, Sprinkling of Bleaching Powder, Pump operation, Functionality of Sluice gate & any other equipments installed or to be install should be Functional in this DPS, , proper flood light, fan, chair, rubber mat, Log book ABC store press ( 4 kg - 02 nos)& Carbon dioxide (4 kg- 02 nos.) type fire extingusher required for safety purpose, Spray Painting, misc type of all civil releted work, light wiring, exhaust fan,Name plate of buidco.wall painting, Recharge of CCtv ,availability of 24 hrsx 365 days in sufficient quantity of saftey materials,black stone (ballast) transportation and loading, unloading of any equipment/material, repairing of Civil structure during emergency for water draining as per Direction of E/I. Payment will be made only if work other than the above 17 items is done. P/Job 1

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing labour, tools and tackles at site for opening all coupling bolts of 350 HP VT motor and pump and all the electrical connections of motor, taking down motor from its base by top lifting of motor from motor stool and stacking the motor at proper place. p/job 1

2 Cost for providing all labours, tools and tackles at site for opening and taking out discharge tee, column pipe, bowl mouth assembly, etc of 350 HP VT pump from sump. p/job 1

3 Cost for opening and dismantling of bowl mouth assembly of 350 HP VT pump, taking out pump shaft, upper & lower bowl mouth, impeller, upper and lower bushes, etc in workshop with GST, CP & Labour Cess. p/job 1

4 Cost for checking of top shaft & line shaft on lathe for straightness and straightening the same on hydraulic press machine with GST, CP & Labour Cess. each 3

5 Cost for supply and fitting O ring of different size p/mt 40

6 Cost for remetalling & rethreading at both ends of top & line shaft upto 3" length with GST, CP & Labour Cess. each 3

7 Cost for making and supplying line shaft holder bronze bearing bush of size ID 75 mm OD 90 mm Length 170 mm each 1

8 Cost for making and supplying motor stool bronze bush of size ID 75 mm OD 90 mm Length 180 mm each 1

9 Cost for making and fitting of SS 416 threaded barrel shaft coupling by cutting and making internal thread of size ID 73 mm OD 105 mm Length 200 mm each 3

10 Cost for making and supplying under bowl top side bronze bush of size ID 101 mm OD 117 mm Length 150 mm each 1

11 Cost for making and supplying under bowl bottom side bronze bush of size ID 101 mm OD 112 mm Length 180 mm each 1

12 Cost for making, supplying and fitting SS 316 Key of size 120 mm long x 22 mm wide x 10 mm thick for impeller and coupling with GST, CP & Labour Cess. each 2

13 Cost for making, supplying and fitting steel coupling bolts as per size and sample with GST, CP & Labour Cess. each 8

14 Cost for repairinging of ratchet plate by doing CI welding, grinding & finishing and making 11 nos. sharp edges of proper size and sample by grinding machine with GST, CP & Labour Cess. p/job 1

15 Cost for reassembling of pump accessories such as bowl mouth bush, impeller, pump shaft, etc in bowl housing in the work shop with GST, CP & Labour Cess. p/job 1

16 Cost for supplying of nitrle rubber oil seal 100 x 130 x 13 with GST, CP & Labour Cess. Each 2

17 Cost for transportation of pump and its accessories from Mandiri Old pump house to workshop and back to pump house including all cost of labour charge for loading & unloading with GST, CP & Labour Cess. p/job 1

18 Cost for scratching old paint of column pipe and discharge pipe and doing one coat primer with red oxide and painting two coats with black Japan paint with GST, CP & Labour Cess. p/job 1

19 Cost for supplying and fitting SS bolts & nuts with washer of different sizes with GST, CP & Labour Cess. each

20 Cost for supplying and fitting SS bolts & nuts with plain & spring washers of size 22 mm dia. X 100 mm long for bowl mouth assembly with GST, CP & Labour Cess.. Make - TVS. each 64

21 Cost for supplying and fitting rubber insertion sheet of size 1/8" thick (black) with GST, CP & Labour Cess. p/kg 25

22 Cost for fitting materials such as cotton waste - 8 kg, gland packing - 2 kg, emery paper- 10 sheets, K oil - 8 ltrs., etc required at the time of fitting of pump with GST, CP & Labour Cess. p/job 1

23 Cost for supplying and filling mobil with GST, CP & Labour Cess. P/Ltr 20

24 Cost for fitting of pump accessories and lowering such as column pipe, bowl mouth assembly, discharge tee line shaft, all spider bushes, etc into the sump. p/job 1

25 Cost for placing of motor on its base, doing coupling of motor & pump, doing all electric connection of motor and testing the pump on load. p/job 1

26 Deduct : Cost of Scrap materials Bronze p/kg -21

27 Deduct : Cost of Scrap materials Stainless steel p/kg -13

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing labour, tools and tackles at site for opening all coupling bolts of 175HP/VT motor and pump and all the electrical connections of motor, taking down motor from its base by top lifting of motor from motor stool and stacking the motor at proper place. p/job 1

2 Cost for providing all labours, tools and tackles at site for opening and taking out discharge tee, column pipe, bowl mouth assembly, etc of 175 HP/VT pump from sump p/job 1

3 Cost for opening and dismantling of bowl mouth assembly of 175 HP VT pump, taking out pump shaft, upper & lower bowl mouth, impeller, upper and lower bushes, etc in workshop with GST, CP & Labour Cess. p/job 1

4 Cost for checking of pump shaft, head shaft & line shaft on lathe for straightness and straightening the same on hydraulic press machine with GST, CP & Labour Cess. each 3

5 Cost for remetalling & rethreading at both ends of pump & line shaft upto 3" length with GST, CP & Labour Cess. each 4

6 Cost for making and supplying line shaft bronze bush of size . ID 56 mm OD 65 mm Length 125 mm each 2

7 Cost for making and supplying stuffing box bronze bush of size ID 56 mm OD 65 mm length 100 mm each 1

8 Cost for making and fitting of SS 416 threaded barrel shaft coupling by cutting and making internal thread of size . ID 53 mm OD 76 mm Length 145 mm each 1

9 Cost for making and supplying bottom side bronze bush of bowl mouth bowl of size . ID 69 mm OD 82 mm Length 130 mm p/job 1

10 Cost for making and supplying top side bronze of bowl mouth of size . ID 69 mm OD 145 mm Length 130 mm p/job 1

11 Cost for making M.S. check nut as per sample and size with GST, CP & Labour Cess. each 1

12 Cost for making, supplying and fitting SS 316 Key as per sample and size for impeller and coupling with GST, CP & Labour Cess. each 3

13 Cost for making, supplying and fitting steel coupling bolts as per size and sample with GST, CP & Labour Cess. each 8

14 Cost for making, supplying and fitting rubber coupling bush as per size and sample with GST, CP & Labour Cess. each 8

15 Cost for repairing of ratchet plate by doing CI welding, grinding & finishing and making 11 nos. sharp edges of proper size and sample by grinding machine with GST, CP & Labour Cess. p/job 1

16 Cost for making holes as per shaft diameter of motor &pump in cluding making key way groove as well as making 8 nos. holes as per fitting of coupling bolts with GST, CP & Labour Cess. p/job 1

17 Cost for supply of thrust angular bearing no. - 29322 E of SKF make including all GST, CP & Labour cess.. each 1

18 Cost for supply of deep groove ball bearing no. - 6020 of SKF make including all GST, CP & Labour cess. each 1

19 Cost for supply of nitrle rubber oil seal of size 85 x 68 x 13 with GST, CP & Labour Cess. each 2

20 Cost for reassembling of pump accessories such as bowl mouth bush, impeller, pump shaft, etc in bowl housing in the work shop with GST, CP & Labour Cess. p/job 1

21 Cost for transportation of pump and its accessories from Mandiri Old pump house to workshop and back to pump house including all cost of labour charge for loading & unloading with GST, CP & Labour Cess. p/job 1

22 Cost for scratching old paint of column pipe and discharge pipe and doing one coat primer with red oxide and painting two coats with black Japan paint with GST, CP & Labour Cess. p/job 1

23 Cost for supplying and fitting MS bolts & nuts with plane & spring washer of size 20 mm dia. X 85 mm long for bowl assembly with GST, CP & Labour Cess.. Make - TVS each 50

24 Cost for supplying and fitting MS bolts & nuts with plane & spring washer of different sizes (20 mm dia.110 mm long - 48 nos.; 27 mm dia. X 130 mm long - 24 nos.) for bearing holder & delivery line with GST, CP & Labour Cess. each 50

25 Cost for supplying and fitting rubber insertion sheet of size 1/8" thick (black) with GST, CP & Labour Cess. p/kg 25

26 Cost for fitting materials such as greese- 4 kg, cotton waste - 5 kg, gland packing - 2 kg, emery paper- 10 sheets, K oil - 5 ltrs. etc required at the time of fitting of pump with GST, CP & Labour Cess. p/job 1

27 Cost for supplying and filling mobil with GST, CP & Labour Cess. P/Ltr 10

28 Cost for fitting of pump accessories and lowering such as column pipe, bowl mouth assembly, discharge tee line shaft, all spider bushes, etc into the sump. p/job 1

29 Cost for placing of motor on its base, doing coupling of motor & pump, doing all electric connection of motor and testing the pump on load. p/job 1

30 Cost for supplying of 'O' ring of different sizes made of neoprine rubber as per sample with GST, CP & Labour Cess. each 5

31 Deduct : Cost of Scrap materials Bronze p/kg -20

32 Deduct : Cost of Scrap materials Stainless steel p/kg -22

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of VT motor & pump and all the electrical connections of motor, taking down motor from its base by top lifting of motor from motor base and stacking the motor at proper place. p/job 2

2 Cost for complete opening of VT motor part by part & taken out of top & bottom bearing from bearing houshing and repairing of bearing houshing with weilding with C.I electrode, turning, and finishing as required shape and size. p/job 2

3 Cost for greasing the bearing of motor and varnishing,heating & taping of enamelled copper winding wire including required materials like grease and varnish-6 lit.etc. p/job 2

4 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place etc. p/job 2

5 Cost for providing all labours, tools and tackles at site for fitting of VT motor on foundation base and refitting nut bolts & testing also. each 2

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing all labours tools and tackles at site for servicing LT distribution panel board by removing dust & vermin by electric blowing machine, decarbonising its all contact joints, bushes washing with petrol, proper insulating of cable terminal with requisite kind of tapes and repair its all internal wiring of 350 & 175HP/VT pump set with GST, CP & Labour Cess. P/Job. 2

2 Cost for supplying and fitting of following for LT distribution Panel board of 350 & 175 HP pump with GST, CP & Labour Cess. :-

(i) Digital VAF + PF meter. Make - L&T & HPL (price list attached) Each 4

(ii) CT coil 1000/5 Each 3

(iii) CT coil 500/5 Each 3

(iv) LED pilot lamp standard 12-240 V AC Colour R/Y/G/A Each 12

(v) Cost for supply and fitting of 3 Pole, 415 v, 50 Hz DTH 800 MCCB having current rating 630 Amp. & breaking capacity 50 KA including GST, C.P. & Labour cess in the outgoing feeder of panel board of 175 HP pump set . Make - L&T Each 1

(vi) Cost for supplying, making & fitting 6 nos. copper bus bar of size 40 mm x 5 mm x 6 m long for faclitating fastening of cable terminals of incomming & outgoing feeders of MCCB. P/job. 1

3 Cost for providing all labours, tools and tackles at site for opening and diasmantling all male and female contacts of 1000 Amp. ACBs of 350 HP and 175 HP pump sets, cleaning and washing all contacts with petrol, greasing them properly and resetting, all complete job with GST, CP & Labour Cess. Each 2

4 Cost for providing all labours, tools & tackles at site for opening & dismantling fully automatic star-delta of 175 HP starter contactors & bus-bars, cleaning the box by remopving dust & vermins by blowing air with blower, washing all components with petrol for ready for repair with GST, CP & Labour Cess. P/job. 1

5 Cost for supplying & fitting following for 175 HP starter with GST, CP & Labour Cess. :-

(i) Cost for supply of LC1FDP330A contactor for delta connection. Make - C&S. Each 1

(ii) Thermal overload relay with relay setting range (315-500)A -LR1F500. Make - C&S Each 1

(iii) Timer TA2-DS2 (0-30 Sec). Make - C&S Each 1

(iv) AC coil of LC1FDP330A. Contactors. Each 1

(v) Selector switch. Each 1

(vi) Push Button ON / OFF Switch Each 1

(vii) Procelein insulator Each 12

(viii) Brass bolts & nuts with washer of different sizes P/kg 2

(ix) Cost for supply of 18 M x 40 mm x 5 mm copper flat for making bus-bars for starter P/job. 1

6 Cost for providing all labours, tools & tackles at site for opening & dismantling fully automatic star-delta of 350 HP starter contactors & bus-bars, cleaning the box by remopving dust & vermins by blowing air with blower, washing all components with petrol for ready for repair with GST, CP & Labour Cess. P/job. 1

7 Cost for supplying and fitting followings for 350 HP standby starter and pannel with GST, CP & Labour Cess.:-

(i) Contactor MNX 650 Make - L&T (Base cost- 99350.00) Each 2

(ii) Cost for supply of overload relay with 630-1000 Amp. LR1F1000. Make - C&S Each 1

(iii) Cost for supply of timer 0-30 sec. type PCN KRTCN 11*0 for AC current . Make - BCH Each 1

(iv) AC coil of MNX650 Amp. Contactors. Make - L&T Each 1

(v) Selector switch. Each 1

(vi) Push Button ON / OFF Switch Each 1

(vii) Cost for supply of 2.5 sq. mm flexible copper wire for repair of internal wiring of all the panel boards & starters P/coil 1

(viii) Cost for supply of lock with key for 350 HP & 175 HP panel boards and starters. P/set 8

8 Cost for complete repairing and changing of spare parts of APFC panel ( 7% reactor) are 200 KVAR- 01 no , TP 50 KA 800 amp MCCB- 1 no , C.T coil - 600/5 amp - 03 no. MCB 32 amp(TP) - 3 no. Wire 2.5 sq. mm - 01 coil, Power controller - 01 no. , Rotary handle - 01 no, speader - 01 set etc for proper controlling of power factor and also preventing power losses from transformer. P/job. 1

9 Cost for cutting and removing old and damaged Copper cable socket of panel board & starters and doing cable socketing of 185 & 240 mm² cable including the cost of cable socket and required insulating materials with GST, CP & Labour Cess. Each 30

10 Deduct : Cost of Scrap materials Copper P/Kg -5

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing all labours, tools and tackles at site for opening and dismantling all electrical connections of HT and LT of 300 KVA & 500 KVA transformer with GST, CP & Labour Cess. P/job 2

2 Cost for opening the top cover and other equalizing pipes of transformer for fitting and tightening of HT & LT studs and draining of transformer oil and stacking of transformer oil in container with GST, CP & Labour Cess. P/job 2

3 Cost for supplying and fitting following with GST, CP & Labour Cess. :-

(i) LT stud of copper Each 4

(ii) LT bush Each 4

(iii) HT stud of copper Each 4

(iv) HT bush Each 4

(v) Rubberized gaskit Each 2

(vi) Transformer oil P/ltr. 200

4 Cost for PVC sleeving suitable to withstand 11 KV power supply for sleeving of 6 SWG jumpher wire. P/mtr 5

5 Cost for 6 SWG copper wire for H.T. connections of transformer to AB switch. p/mtr 6

6 Cost for tightening of HT & LT studs, refilling of transformer oil and fitting of top cover with ruberised gaskit and reisnstaling equalizing pipes, etc all complete work with GST, CP & Labour Cess. P/job 2

7 Cost for filtration of transformer oil.(300 KVA transformer contains 340 ltrs. & 500 KVA transformer contains 825 ltrs. Of T. oil) with GST, CP & Labour Cess. P/ltr. 1165

8 Cost for supplying making and fitting of 16 nos. extension bus bars each of length 2' made of copper strips of size 75 mm x 8 mm x 10 M for connection of cables to the transformers. P/job 1

9 Cost for cutting and removing old and damaged cable socket of LT cable of transformer and doing cable socketing including the cost of 240 mm² cable socket and all requisite insulating materials such as glass tape, PVC tape, empire Tape, etc with GST, CP & Labour Cess. Each 26

10 Deduct : Cost of Scrap materials Copper P/kg -5

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing all labours, tools and tackles at site for opening and dismantling of 400 Amp. AB switch such as male & female contact, knife type contact, cleaning & washing each component with petrol properly and resetting them all complete job with GST, CP & Labour Cess. P/job 2

2 Cost for supplying & fitting following spares with GST, CP & Labour Cess. :-

i. Post insulator. Each 4

ii. Horn gap fuse set. ( 1 pcs = 3 nos.) Each 2

iii. Net fuse for 400 Amp. AB switch. (1 pcs =3 nos.) Each 2

iv. Copper wire 6 SWG. P/kg 5

v. GI bolts & nuts with washer of different sizes P/kg 2

vi. Knife type male & female contact for 400 Amp. AB switch. ( 1 Pcs = 3 nos) Each 1

vii. Fuse wire 19 SWG. P/kg 0.5

vii. Rabit conductor for connection of main incoming feeder. P/ M 15

3 Cost for supply of M.S. clamp for fitting of lightening arrestor on M.S. channel with GST, CP & Labour Cess. Each 3

4 Deduct : Cost of Scrap materials Copper P/kg -2

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing all labours, tools, tackles and an experienced mechanic at site for servicing of 198 HP diesel engine of Greaves make by checking of fuel pump, oil pump, decarbonisation of engine cylinder head and testing of engine on unload and load, etc, all complete with GST, CP & Labour Cess. P/job 1

2 Cost for supplying and fitting following with GST, CP & Labour Cess.:-

(i) Air filter Each 1

(ii)Diesel filter set P/set 1

(iii)Lubricating oil filter Each 2

(iv) Set of Hoses p/set 1

(v) Fuel Flexible pipe p/set 1

(vi) Fuse 24V Assly Each 1

(vii) Coolant 5 ltr cane P/cane 1

(viii) V Belt 1280 Each 3

(ix) Relay in electrical panel Each 2

(x) Solenoid 24 Volt Each 1

(xi) Lube Oil 20Ltr P/cane 1

(xii) Head Gasket Each 1

(xiii) Set of joint Each 1

(xiv) Set of sealing ring P/set 1

(xv) Set of Hose clip Each 1

(xvi) Magnetic Pickup P/set 1

(xvii) Battery Terminal Each 4

3 Cost for repairing the leakages in exhaust system by dismantaling the exhaust manifolds and providing the gasket sets and nut bolts and testing on load. P/Job. 1

4 Cost for dismantaling the power take off system, providing and fitting of cluch set with pressure plate and testing on load at site. P/Job. 1

5 Cost for checking of leakages in radiator in workshop and repairing of leakages in radiator by replacing damaged portion of copper tube and repairing leakages by soldering of reparable copper pipes with GST, CP & Labour Cess. P/Job. 1

6 Cost repairing of electrical panel of diesel engine by repalcing all burnt and damaged electrical wires and fuses and ckecking the electrical panel including the cost of labour and electricians with GST, CP & Labour Cess. P/Job. 1

7 Cost for repairing and servicing of self starter with all materials with GST, CP & Labour Cess. P/job 1

8 Cost for alternator repairing & servicing with GST, CP & Labour Cess. P/job 1

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 198 HP pump from motor and all electrical connection of motor and opening all nut and bolt of pump casing, bearing housing and taking out of bearing housing together with impeller coupling and pump shaft. P/job 1

2 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. P/job 1

3 Cost for remetalling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labours, tools & tackles etc. P/job 1

4 Cost for making, supply and fitting of bronze nush including cutting. Turning, polishing and finishing of size 100 mm ID x 122 mm OD x 220 mm Length Each 1

5 Cost for supply and fitting of S cylindercal roller bearing no. SKF 3322 A equivalent for 198 HP pump with GST, CP and Labour Cess. Each 2

6 Cost for supply and fitting of spherical Roller bearing no. SKF 3322 a equivalent for 198 HP Electric pump with GST,CP & labour cess etc Each 1

7 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. p/set 1

8 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. p/job 1

9 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. p/job 1

10 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. p/set 1

11 Cost for fitting consumable materials such as grease, gland packing 5/8", cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. p/job 1

12 Cost for supplying al labours, tools & tackles at size for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing on unload. P/job 1

13 Providing all labours, tools, tackles for installation of 198 HP pump on foundation,refitting nut-bolt & testing on unload at DPS. P/job 1

14 Cost for supplying and fitting bolts and nuts of different sizes with washer including labours, tools & tackles. P/kg 10

15 Cost for supplying and fitting SS coupling bolt as per size and sample including labours, tools & tackles Each 10

16 Deduct: Cost of scrap materials stainless steel P/kg -2

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for supplying all labours, tools and suitable tackles for cleaning and desilting. p/m³ 108.16

2 Supplying all labours, tools and tackles for cleaning and extracting floating materials from the approach channel and bye pass drain outlet channel etc. p/m² 92.41

3 Cost for supplying all labours, tools, tackles at site for lift and disposal of soil and foreign materials to a lead of 15 KM all complete with loading and unloading charge all complete. (70% of silt taken out) p/m³ 75.71

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for making and suppling bamboo gratings of size 12' wide x 12' long made of half 12' long x 2.5" dia. bamboo having gap between two bamboo 2.5" including labours, tools & tackles. Each 8

2 Cost for M.S. wire for fastening of bamboo gratings into sump. p/kg 7

3 Cost for providing all labours, tools and tackles at site for fitting, fixing and binding bamboo gratings. Each 7

Sl. No. Particulars of Work Unit Qty. Rate Amount (in Rs.)

1 Cost for providing all labours tools and tackles at site for opening and dismantling of lifting gear unit mechanisms, cleaning with K. oil, greasing all the gears and resetting the same including all consumable materials such as K.oil, grease, cotton waste, mobil, etc and replacing all the bolts and nuts of TVS make with GST, CP & Labour cess. Each 15

2 Cost for supplying all labours, tools and tackles at site for taking out damaged and broken wire rope of size 5/8" dia. and supplying and fitting new wire rope with GST, CP & Labour cess. P/M 50

3 Cost for supplying and fitting 'U' clamp suitable for fastening 5/8" dia. wire rope with GST, CP & Labour cess. Each 12

4 Cost for supplying all labours, tools and tackles at site for lifting plate of flap valves from outlet and supplying and fitting 3/4" x 8" long steel pin shaft in flap valve with GST, CP & Labour cess. Each 6

5 Cost for miscellaneous work such as closing leakages in flap valves caused due to floating materials in the valves with the help of diver before starting of pumping machineries during flood situation in Ganga river with GST, CP & Labour cess. P/job. 1

6 Deduct : Cost of Scrap materials M.S. P/kg -8

Gr-06 (4) Estimate for the work of Annual Repairing, maintenance & operation of electro-mechanical accessorries of the pump sets installed in storm drainage pumping plant at Mandiri new monsoon 2026 for the Year 2026-2027.

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for Complete repairing and overhauling of 220 HP VT pump set as per annexure-1 P/job 1

2 Cost for Complete repairing and overhauling of 425 HP VT pump set as per annexure-2 P/job 1

3 Cost for Complete repairing and overhauling of 422 HP VT pump set as per annexure-3 P/job 1

4 Cost for Complete repairing and overhauling of 422 HP VT pump set as per annexure-4 P/job 1

5 Cost for Repairing and overhauling of 4 nos electric motor as per Annexure-05 P/Job 1

6 Cost for repairing & servicing of panel boards and starter of 2X 422 HP, 1 x 425 HP , 1 x 220 HP pump set as per annexure-06 P/job 1

7 Cost for cleaning, servicing, greasing and repairing of flap valve as per annexure-07 P/job 1

8 Cost for servicing & filteration of T- oil of 3 x 800 KVA & 1 x 500 KVA out door transformers as per annexure-08 P/job 1

9 Cost for servicing, cleaning, greasing and repairing of AB switch and DP structure of 11 KV electric substation as per annexure-09 P/job 1

10 Cost for cleaning and Desilting of sumps as per annexure-10 . P/job 1

11 Cost for Making Bamboo gratings of size 12'x12'-08 nos.(approx) made of 12' (approx) long 2.5'' dia bamboo with gap of 2.5'', with nails ans S.S. wire for fixing and installation in the sumps inlet at storm Drainage Pumpinng as Per annexture-11 P/Job 1

12 Cost for Complete Reparing ,Overhauling ,Servicing & Functionlity of 20 Ton Manual Chain pulley block Over head crane mounted on DPS as Per Direction of Engineer-in-Charge. P/Job 1

13 Cost for Providing & Installation of New M.S gratings (Double Coat painting)with required size & Shape of M.S Channel & M.S Flat (Thick 10 mm)as Per Direction of Engineer- in -Charge at storm Drainage Pumping Plant. P/Job 1

14 Earthing with copper earth plate 600mmx600mmx3mm thick imcluding accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. (but without charcoal/coke and salt as required)(BCD SOR 3.5) P/job 2

15 Cost for Providing & Laying of 240 Sq.mm 3.5 core copper armoured Cable from starter to motor with required Jointing kit as per Direction of Engineer -In Charge (make - KEI/Polycab/Havells). Per m 10

16 Cost for removing rotten delivery of 350 HP and making and fabricating new delivery of storm drainage pumping plant as per annexure-12 Per job 1

17 Cost for Deployment of 5 nos. x 3 shifts sweepers for removing floating materials from sump, cleaning the premises, taking out the garbages from pump impeller and miscellaneous work during the monsoon period 1st june 2026 to 15th Oct 2026 and during rest period 02 no. x 1 shift from 01.4.2026 to 31.05.2026 & 16th Oct.2026 to 31.03. 2027 ..(The no. of sweeper may increase as per situation arisen due to heavy rain fall). shift 2511

18 Cost for Deployment of 2 nos. x 3 shifts Highly skilled technician cum pump operators during the monsoon period 1st june 2026 to 15th Oct 2026 and during rest period 01 no. x 3 shift from 01.4.2026 to 31.05.2026 & 16th Oct.2026 to 31.03. 2027 (The no. of pump operators may increase as per situation arisen due to heavy rain fall). shift 1506

19 Maintenance of miscllanious work of all Electro machineries for the period of (01.04.2026 to 31.03.2027) at DPS. The Bidder shall be totally responsible for Proper Functioning of DPS with immediate minor & major work repairing like burning of motor, transformer,Maintenance of new supply pump & transformer per annum, panel, starters, bearing replacing, Cleaning of Campus, Sprinkling of Bleaching Powder, Pump operation, Functionality of Sluice gate & any other equipments installed or to be install should be Functional in this DPS, , proper flood light, fan, chair, rubber mat, Log book ABC store press ( 4 kg - 02 nos)& Carbon dioxide (4 kg- 02 nos.) type fire extingusher required for safety purpose, Spray Painting, misc type of all civil releted work, light wiring, exhaust fan,Name plate of buidco.wall painting, Recharge of CCtv ,availability of 24 hrsx 365 days in sufficient quantity of saftey materials,black stone (ballast) transportation and loading, unloading of any equipment/material, repairing of Civil structure during emergency for water draining as per Direction of E/I. Payment will be made only if work other than the above 18 items is done. P/job 1

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing labour, tools and tackles at site for opening all coupling bolts of 220 HP VT motor and pump and all the electrical connections of motor, taking down motor from its base by top lifting of motor from motor stool and stacking the motor at proper place. p/job 1

2 Cost for providing all labours, tools and tackles at site for opening and taking out discharge tee, column pipe, bowl mouth assembly, etc of 220 HP VT pump from sump p/job 1

3 Cost for opening and dismantling of bowl mouth assembly of 220 HP VT pump, taking out pump shaft, upper & lower bowl mouth, impeller, upper and lower bushes, etc in workshop. p/job 1

4 Cost for checking of pump shaft, head shaft & line shaft on lathe for straightness and straightening the same on hydraulic press machine. each 4

5 Cost for remetalling & rethreading at both ends of pump & line shaft. each 4

6 Cost for making and supplying line shaft bronze bush of size ID 63 mm OD 72 mm Length 125 mm each 2

7 Cost for making and supplying stuffing box bronze bush of size ID 63 mm OD 72 mm Length 125 mm each 1

8 Cost for making and fitting of SS 416 shaft coupling by cutting and making internal thread of size ID 59 mm OD 85 mm Length 170 mm each 3

9 Cost for making and supplying lower bearing bush for discharge bowl of size ID 69 mm OD 82 mm Length 200 mm p/job 1

10 Cost for making, supplying and fitting SS 316 Key as per sample and size for impeller and coupling. each 3

11 Cost for making, supplying and fitting steel coupling bolts as per size and sample. each 10

12 Cost for repairing of ratchet plate by doing CI welding, grinding & finishing and making 11 nos. sharp edges of proper size and sample by grinding machine p/job 1

13 Cost for reassembling of pump accessories such as bowl mouth bush, impeller, pump shaft, etc in bowl housing in the work shop. p/job 1

14 Cost for transportation of pump and its accessories from Rajapur New pump house to workshop and back to pump house including all cost of labour charge for loading & unloading. p/job 1

15 Cost for scratching old paint of column pipe and discharge pipe and doing one coat primer with red oxide and painting two coats with black Japan paint. p/job 1

16 Cost for supplying and fitting SS bolts & nuts with washer of different sizes. each 144

17 Cost for supplying and fitting rubber insertion sheet of size 1/8" thick (black) p/kg 25

18 Cost for fitting materials such as greese- 4 kg, cotton waste - 5 kg, gland packing - 2 kg, emery paper- 10 sheets, K oil - 5 ltrs. etc required at the time of fitting of pump. p/job 1

19 Cost for supplying and filling mobil P/Ltr 12

20 Cost for fitting of pump accessories and lowering such as column pipe, bowl mouth assembly, discharge tee line shaft, all spider bushes, etc into the sump. p/job 1

21 Cost for placing of motor on its base, doing coupling of motor & pump, doing all electric connection of motor and testing the pump on load. p/job 1

22 Cost for supplying of 'O' ring of different sizes made of neoprene rubber as per sample. each 14

23 Cost for supplying of rachet pin each 4

24 Deduct : Cost of Scrap materials Bronze p/kg 11

25 Deduct : Cost of Scrap materials Stainless steel p/kg -30

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing labour, tools and tackles at site for opening all coupling bolts of 425 HP VT motor and pump and all the electrical connections of motor, taking down motor from its base by top lifting of motor from motor stool and stacking the motor at proper place. p/job 1

2 Cost for providing all labours, tools and tackles at site for opening and taking out discharge tee, column pipe, bowl mouth assembly, etc o425 HP VT pump from sump p/job 1

3 Cost for opening and dismantling of bowl mouth assembly of 425 HP VT pump, taking out pump shaft, upper & lower bowl mouth, impeller, upper and lower bushes, etc in workshop. p/job 1

4 Cost for checking of pump shaft, head shaft & line shaft on lathe for straightness and straightening the same on hydraulic press machine. each 3

5 Cost for remetalling & rethreading at both ends of line shaft. each 3

6 Cost for supply and fitting O ring of different size p/mt 40

7 Cost for making , supply and fitting line shaft bronze bush of size ID 81 mm OD 95 mm Length 155 mm each 2

8 Cost for making and supplying stuffing box bronze bush of size ID 81 mm OD 95 mm Length 175 mm each 1

9 Cost for making and fitting of SS 416 shaft coupling by cutting and making internal thread of size ID 75 mm OD 100 mm Length 180 mm each 3

10 Cost for making and supplying upper bearing bush for discharge case of size ID 81 mm OD 96 mm Length 90 mm p/job 1

11 Cost for making and supplying lantern ring of size ID 81 mm OD 96 mm Length 42 mm p/job 1

12 Cost for supply and fitting of SS 416 pump shaft sleeve each 1

13 Cost for supply and fitting of distance sleeve as per sample and size each 2

14 Cost for supply and fitting of bearing bush for bearing housing each 1

15 Cost for supplying and fitting following :-

(i) Stuffing box packing. each 1

(ii) Key for shaft sleeve. each 1

(iii) Key for pump shaft. each 1

(iv) Rubber coupling bush. each 1

(v) Steel coupling bolts. each 6

(vi) Ratchet pin SS 410 each 6

16 Cost for repairing of ratchet plate by doing CI welding, grinding & finishing and making 12 nos. sharp edges of proper size and sample by grinding machine. p/job 1

17 Cost for reassembling of pump accessories such as bowl mouth bush, impeller, pump shaft, etc in bowl housing in the work shop. p/job 1

18 Cost for transportation of pump and its accessories from Rajapur New pump house to workshop and back to pump house including all cost of labour charge for loading & unloading. p/job 1

19 Cost for scratching old paint of column pipe and discharge pipe and doing one coat primer with red oxide and painting two coats with black Japan paint. p/job 1

20 Cost for supplying and fitting SS bolts & nuts with washer of different sizes. each 60

21 Cost for supplying and fitting rubber insertion sheet of size 1/8" thick (black). p/kg 15

22 Cost for supplying and fitting of roller bearing SKF- 29324 M each 1

23 Cost for supplying and fitting ball bearing SKF- 6040 each 1

24 Cost for fitting materials such as cotton waste - 5 kg, grease -3 kg gland packing - 2 kg, emery paper- 10 sheets, K oil - 8 ltrs. etc required at the time of fitting of pump. p/job 1

25 Cost for supplying and filling mobil. P/Ltr 10

26 Cost for fitting of pump accessories and lowering such as column pipe, bowl mouth assembly, discharge tee line shaft, all spider bushes, etc into the sump. p/job 1

27 Cost for placing of motor on its base, doing coupling of motor & pump, doing all electric connection of motor and testing the pump on load. p/job 1

28 Deduct : Cost of Scrap materials Bronze p/kg -8

29 Deduct : Cost of Scrap materials Stainless steel p/kg -16

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing labour, tools and tackles at site for opening all coupling bolts of 422 HP VT motor and pump and all the electrical connections of motor, taking down motor from its base by top lifting of motor from motor stool and stacking the motor at proper place. p/job 1

2 Cost for providing all labours, tools and tackles at site for opening and taking out discharge tee, column pipe, bowl mouth assembly, etc of 422 HP VT pump from sump p/job 1

3 Cost for opening and dismantling of bowl mouth assembly 422 HP VT pump, taking out pump shaft, upper & lower bowl mouth, impeller, upper and lower bushes, etc in workshop. p/job 1

4 Cost for checking of pump shaft, head shaft & line shaft on lathe for straightness and straightening the same on hydraulic press machine. each 3

5 Cost for remetalling & rethreading at both ends of pump & line shaft. each 4

6 Cost for making and supplying line shaft bronze bush of size ID 81 mm OD 95 mm Length 175 mm each 2

7 Cost for making and supplying stuffing box bronze bush of size ID 81 mm OD 95 mm Length 175 mm each 1

8 Cost for making and fitting of SS 416 shaft coupling by cutting and making internal thread of size ID 78 mm OD 115 mm Length 220 mm each 2

9 Cost for making and supplying lower bearing bush for discharge bowl of size ID 100 mm OD 118 mm Length 180 mm p/job 1

10 Cost for making and supplying upper discharge bowl bearing bush of size ID 100 mm OD 117 mm Length 140 mm p/job 1

11 Cost for making M.S. check nut of size 140 mm OD x 80 mm ID x 80 mm long. each 1

12 Cost for making, supplying and fitting SS 316 Key of size 120 mm long x 22 mm wide x 10 mm thick for impeller and coupling. each 2

13 Cost for making, supplying and fitting steel coupling bolts as per size and sample. each 16

14 Cost for repairing of ratchet plate by doing CI welding, grinding & finishing and making 11 nos. sharp edges of proper size and sample by grinding machine. p/job 1

15 Cost for reassembling of pump accessories such as bowl mouth bush, impeller, pump shaft, etc in bowl housing in the work shop. p/job 1

16 Cost for transportation of pump and its accessories from Rajapur New pump house to workshop and back to pump house including all cost of labour charge for loading & unloading. p/job 1

17 Cost for scratching old paint of column pipe and discharge pipe and doing one coat primer with red oxide and painting two coats with black Japan paint. p/job 1

18 Cost for supplying and fitting SS bolts & nuts with washer of different sizes. each 20

19 Cost for supplying and fitting rubber insertion sheet of size 1/8" thick (black). p/kg 40

20 Cost for supplying and fitting of roller bearing SKF- 29324 M each 1

21 Cost for supplying and fitting ball bearing SKF- 6040 each 1

22 Cost for fitting materials such as cotton waste - 8 kg, gland packing - 2 kg, emery paper- 10 sheets, K oil - 8 ltrs., etc required at the time of fitting of pump. p/job 1

23 Cost for supplying and filling mobil. P/Ltr 20

24 Cost for fitting of pump accessories and lowering such as column pipe, bowl mouth assembly, discharge tee line shaft, all spider bushes, etc into the sump. p/job 1

25 Cost for placing of motor on its base, doing coupling of motor & pump, doing all electric connection of motor and testing the pump on load. p/job 1

26 Deduct : Cost of Scrap materials Bronze p/kg -13

27 Deduct : Cost of Scrap materials Stainless steel p/kg -22

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing labour, tools and tackles at site for opening all coupling bolts of 422 HP VT motor and pump and all the electrical connections of motor, taking down motor from its base by top lifting of motor from motor stool and stacking the motor at proper place. p/job 1

2 Cost for providing all labours, tools and tackles at site for opening and taking out discharge tee, column pipe, bowl mouth assembly, etc of 422 HP VT pump from sump p/job 1

3 Cost for opening and dismantling of bowl mouth assembly of 425 HP VT pump, taking out pump shaft, upper & lower bowl mouth, impeller, upper and lower bushes, etc in workshop. p/job 1

4 Cost for checking of pump shaft, head shaft & line shaft on lathe for straightness and straightening the same on hydraulic press machine. each 3

5 Cost for remetalling & rethreading at both ends of pump & line shaft. each 4

6 Cost for making and supplying line shaft bronze bush of size ID 81 mm OD 95 mm Length 175 mm each 2

7 Cost for making and supplying stuffing box bronze bush of size ID 81 mm OD 95 mm Length 175 mm each 1

8 Cost for making and fitting of SS 416 shaft coupling by cutting and making internal thread of size ID 78 mm OD 115 mm Length 220 mm each 2

9 Cost for making and supplying lower bearing bush for discharge bowl of size ID 100 mm OD 118 mm Length 180 mm p/job 1

10 Cost for making and supplying upper discharge bowl bearing bush of size ID 100 mm OD 117 mm Length 140 mm p/job 1

11 Cost for making M.S. check nut of size 140 mm OD x 80 mm ID x 80 mm long. each 1

12 Cost for making, supplying and fitting SS 316 Key of size 120 mm long x 22 mm wide x 10 mm thick for impeller and coupling. each 2

13 Cost for making, supplying and fitting steel coupling bolts as per size and sample. each 16

14 Cost for repairing of ratchet plate by doing CI welding, grinding & finishing and making 11 nos. sharp edges of proper size and sample by grinding machine p/job 1

15 Cost for reassembling of pump accessories such as bowl mouth bush, impeller, pump shaft, etc in bowl housing in the work shop. p/job 1

16 Cost for transportation of pump and its accessories from Mandiri New pump house to workshop and back to pump house including all cost of labour charge for loading & unloading. p/job 1

17 Cost for scratching old paint of column pipe and discharge pipe and doing one coat primer with red oxide and painting two coats with black Japan paint. p/job 1

18 Cost for supplying and fitting SS bolts & nuts with washer of different sizes. each 15

19 Cost for supplying and fitting rubber insertion sheet of size 1/8" thick (black) p/kg 40

20 Cost for supplying and fitting of roller bearing SKF- 29324 M each 1

21 Cost for supplying and fitting ball bearing SKF- 6040 each 1

22 Cost for fitting materials such as cotton waste - 8 kg, gland packing - 2 kg, emery paper- 10 sheets, K oil - 8 ltrs., etc required at the time of fitting of pump. p/job 1

23 Cost for supplying and filling mobil P/Ltr 20

24 Cost for fitting of pump accessories and lowering such as column pipe, bowl mouth assembly, discharge tee line shaft, all spider bushes, etc into the sump. p/job 1

25 Cost for placing of motor on its base, doing coupling of motor & pump, doing all electric connection of motor and testing the pump on load. p/job 1

26 Deduct : Cost of Scrap materials Bronze p/kg -14

27 Deduct : Cost of Scrap materials Stainless steel p/kg -25

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of VT motor & pump and all the electrical connections of motor, taking down motor from its base by top lifting of motor from motor base and stacking the motor at proper place. p/job 4

2 Cost for complete opening of VT motor part by part & taken out of top & bottom bearing from bearing houshing and repairing of bearing houshing with weilding with C.I electrode, turning, and finishing as required shape and size. p/job 4

3 Cost for greasing the bearing of motor and varnishing,heating & taping of enamelled copper winding wire including required materials like grease and varnish-6 lit.etc. p/job 4

4 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place etc. p/job 4

5 Cost for providing all labours, tools and tackles at site for fitting of VT motor on foundation base and refitting nut bolts & testing also. each 4

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing all labours tools and tackles at site for servicing LT distribution panel board by decarbonising its all contact joints, bushes washing with petrol, proper insulating of cable terminal with requisite kind of tapes and repair its all internal wiring of VT pump set. p/job 4

2 Cost for supplying and fitting of following for LT distribution Panel board of 425 HP pump :-

(i) Volt metre (0-500) Volt. each 4

(ii) Ampere Metre (0-1000) Amp each 4

(iii) CT coil 1000/5 each 9

(iv) LED pilot lamp standard 24-240 V AC/DC Colour R/Y/G/A each 15

(v) Selector switch for Amp. & Volt meters each 8

3 Cost for doing cable socketing of heat proof cable with copper cable socket and required insulating materials. each 15

4 Cost for cutting and removing old and damaged aluminium cable socket of panel board, rotor controller starter, MCCB, ACB & motor and doing cable socketing of 240 mm² cable including the cost of cable socket and required insulating materials. each 36

5 Cost for providing all labours, tools suitable tackles & an electrician for opening and dismantling the starters of 1 x 220 HP pump sets by opening and dismantling all the contactors, timer, overload relay, etc, cleaning the starter by blowing air to remove dust & vermins, washing all the components with petrol, resetting the starter by replacing burnt & damaged contactors and their accessories, tapping all the bus bars by rapping pvc tape including the cost of pvc tape , petrol etc. all complete job. p/job 1

6 Cost for supplying & fitting following for 220 HP starter :-

(i) Cost for supply of LC1FDP300A contactor for delta connection. Make - C&S . each 1

(ii) Thermal overload relay with relay setting range 315-500 Amp. LR1F500. Make - C&S each 1

(iii) Timer TA2DS2 (0-30 SEC) Make - C&S each 1

7 Cost for complete repairing and changing of spare parts of APFC panel ( 7% reactor) are 200 KVAR- 01 no , TP 50 KA 800 amp MCCB- 1 no , C.T coil - 600/5 amp - 03 no. MCB 32 amp(TP) - 3 no. Wire 2.5 sq. mm - 01 coil, Power controller - 01 no. , Rotary handle - 01 no, speader - 01 set etc for proper controlling of power factor and also preventing power losses from transformer. each 2

8 Cost for providing all labours, tools, suitable tackles and an electrician for opening and dismantling of 1000 Amp. ACB of pump sets, cleaning all the moving & fixed contacts with petrol and greasing them properly as well as setting the male & female contacts and replacing burnt bakelite terminals, all complete job. p/job 2

9 Cost for supplying and fitting followings in the soft starter of 350 HP pump sets are i. HRC Fuse - 06 nos. ii. MCCB 1000 amp - 2 nos iii. TP contactor 220 volt control-01 no. iv.ON/OFF Switch- 02 nos v. soft starter control kit - 01 vi. Soft starter display kit board - 01 vii. soft starter display cable 29 p/38 p flat cable -01 viii.Relay meter ( control line) - 01, ix.Auto switch- 01,x. Relay meter (MPR) - 01 ,xi. single phase preventer- 01,xii. Four step self starting relay- 01,xiii. Amp volt control meter- 01, xiv.MCB- 04 way 63 amp - 01,xv. 63 amp single phase - 04 no. , xvi.2 amp - 6 no.xvii contractor model LC1E 1201, 4 pole 12 amp- 6 nos.xviii LED- 15 nos. xix 110 volt,LED - 06 nos, 440 volt p/job 1

10 Cost for providing all labours, tools suitable tackles & an electricians for opening and dismantling the starters of 2 x 425 HP pump sets by opening and dismantling all the contactors, timer, overload relay, etc, cleaning the starter by blowing air to remove dust & vermine, washing all the components with petrol, resetting the starter by replacing burnt & damaged contactors and their accessories, tapping all the bus bars by rapping pvc tape including the cost of pvc tape & petrol, etc. all complete job. p/job 2

11 2ost for supply of followings for starers of 2 x 422 HP pump sets:-

(i) Contactor MNX 650 Make - L&T each 1

(ii) AC coil of MNX650 & MNX 550 Amp. Contactors. each 1

(iv) AC coil of LC1FDP500A. Contactors. each 1

(v) Cost for supply of overload relay with 630-1000 Amp. LR1F1000. Make - C&S each 1

(vi) Cost for supply of timer 0-30 sec. type PCN KRTCN 11*0 for AC current make - BCH each 2

19 Cost for cutting and removing old and damaged Copper & aluminium cable socket of panel board & starters and doing cable socketing of 240 mm² cable of 2 x425 HP & 1 x 220 HP panel & starters including the cost of cable socket and required insulating materials each 30

20 Deduct : Cost of Scrap materials Copper p/kg -4

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing all labours tools and tackles at site for opening and dismantling of lifting gear unit mechanisms, cleaning with K. oil, greasing all the gears and resetting the same including all consumable materials such as K.oil, grease, cotton waste, mobil, etc and replacing all the bolts and nuts of TVS make with GST, CP & Labour cess. Each 15

2 Cost for supplying all labours, tools and tackles at site for taking out damaged and broken wire rope of size 5/8" dia. and supplying and fitting new wire rope with GST, CP & Labour cess. P/M 50

3 Cost for supplying and fitting 'U' clamp suitable for fastening 5/8" dia. wire rope with GST, CP & Labour cess. Each 12

4 Cost for supplying all labours, tools and tackles at site for lifting plate of flap valves from outlet and supplying and fitting 3/4" x 8" long steel pin shaft in flap valve with GST, CP & Labour cess. Each 6

5 Cost for miscellaneous work such as closing leakages in flap valves caused due to floating materials in the valves with the help of diver before starting of pumping machineries during flood situation in Ganga river with GST, CP & Labour cess. P/job. 1

6 Deduct : Cost of Scrap materials M.S. P/kg -8

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing all labours, tools and tackles at site for opening and dismantling all electrical connections of HT and LT of 500 KVA transformer. P/job 4

2 Cost for opening the top cover and other equalizing pipes of transformer for fitting and tightening of HT & LT studs and draining of transformer oil and stacking of transformer oil in container. P/job 4

3 Cost for supplying and fitting following .:-

(i) LT stud of copper Each 12

(ii) LT bush Each 12

(iii) HT stud of copper Each 10

(iv) HT bush Each 10

(v) Rubberized gasket Each 4

(vi) Transformer oil P/ltr. 90

4 Cost for tightening of HT & LT studs, refilling of transformer oil and fitting of top cover with ruberised gasket and re-installing equalizing pipes, etc all complete. P/job 4

5 Cost for filtration of transformer oil (both transformers contain 470 ltrs) P/ltr. 1500

6 Cost for PVC sleeving suitable to withstand 11 KV power supply for sleeving of 6 SWG jumpher wire. p/mtr 60

7 Cost for doing cable socketing including the cost of 300 mm² cable socket and all requisite insulating materials such as glass tape, PVC tape, empire Tape, etc with GST, CP & Labour cess. Each 60

8 Cost for cutting and removing old and damaged cable socket of LT cable of transformer and doing cable socketing including the cost of 240 mm² cable socket and all requisite insulating materials such as glass tape, PVC tape, empire Tape, etc with GST, CP & Labour cess. Each 60

9 Deduct : Cost of Scrap materials Copper P/kg -4

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for providing all labours, tools and tackles at site for opening and dismantling of 400 Amp. AB switch such as male & female contact, knife type contact, cleaning & washing each component with petrol properly and resetting them all complete job. P/job 4

2 Cost for supplying & fitting following spares. :-

i. Post insulator. Each 12

ii. Bus bar insulator. Each 36

iii. Horn gap fuse. ( 1 pcs = 3 nos.) Each 4

iv. Net fuse for 400 Amp. AB switch. (1 pcs =3 nos.) Each 4

v. Copper wire 6 SWG. p/kg 12

vi. GI bolts & nuts with washer of different sizes p/kg 12

vii. Knife type male & female contact set for 400 Amp. AB switch. ( 1 Pcs = 3 nos) Each 4

viii. Bus bar socket 1" dia. size. Each 15

ix. Bus bar T-connector 1" dia. size. Each 12

x. Aluminium pipe of dia 1'' suitable for 11KV electric supply p/mtr 40

xi. Lightening arrestor for 11 KV sub station. p/set 6

xii. Fuse wire 19 SWG P/kg 1.5

xiii. Rabit conductor for connection of main incoming feeder. p/mtr 20

3 Cost for providing all labours tools and tackles at site for supplying of new 400 Amp. 11 KV grade AB switch for fitting on DP of main incoming feeder.ss. each 4

4 Cost for providing all labours tools and tackles at site for supplying of new 600 Amp. 11 KV grade AB switch for fitting on DP of main incoming feeder. each 2

5 Cost for providing all labours, tools & tackles at site for opening and taking out old and damaged AB switch of main incoming feeder from DP and fitting, fixing anmd testing new AB switch with GST, CP & Labour cess. p/job 4

6 Cost for supply of 2 nos. M.S. channel of size 75 mm x 40 mm x 2.5 M for fitting of lightening arrestor. p/kg 42

7 Cost for supply of clamps for fitting the channel on DP. Each 6

8 Cost for supply of M.S. clamp for fitting of lightening arrestor & 600 Amp. AB switch on M.S. channel. each 5

9 Cost for providing all labours, tools & tackles at site for fitting and fixing the lightening arrestor on DP by making three nos. hole in the channel, fitting the lightening arrestor on M.S. channel with clamps, fitting the M.S. channel on DP with clamp, all complete work with GST, CP & Labour cess. p/job 2

10 Cost for supply of 11 KV discharge rod. each 6

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for supplying all labours, tools and suitable tackles for cleaning and desiliting of filled and choked sump tank, approach channel and inlet chamber etc of different pumping station and to lift and disposal of all soils and foreign materials all complete as per specification and direction of E/I at site. p/m³ 357.2

(ii) Inlet chamber

(iii) Approach channel

(iv) Outlet channel

2 Supplying all labours, tools and tackles for cleaning and extracting floating materials from the approach channel and bye pass drain outlet channel etc. p/m² 215.5

(i) Approach channel

(ii) By Pass drain

3 Cost for providing all materials , tools for making diversion bandh at the approach chaneel with help of sand filled Plastic bags and placing the sand in proper stake and making water tight to divert the flow of water for desilting etc all complete as per direction of E.I. in Mandiri New pumping plant . p/bag 462

4 Labour charge for taking out sand bags from drain of sump after desilting of bandh after the completion of desilting work in Mandiri New pumping plant. p/bag 462

5 Cost for providing all labours, tools, tackles & a 5 H.P. Diesel pump set at Mandir New pumping plant for dewatering the area within band including cost of hire of diesel pump set and lubricants & fuel. p/hr 15

6 Cost for supplying all labour, tools, tackles at site for lift and disposal of soils and foreign materials to a lead of 15 KM all complete with loading and unloading charge all complete. (70% of silt taken out) p/m³ 250.17

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for making and suppling bamboo gratings of size 12' wide x 12' long made of half 12' long x 2.5" dia. bamboo having gap between two bamboo 2.5" including labours, tools & tackles. Each 8

2 Cost for M.S. wire for fastening of bamboo gratings into sump. p/kg 10

3 Cost for providing all labours, tools and tackles at site for fitting, fixing and binding bamboo gratings. Each 10

Sl. No. Particular of work Qty Unit Rate in Rs. (To be filled by the bidder) Amount (in Rs.)

Rate in Figure Rate in words

1 Cost for making structural arrangement out side in the outfall to facilitate the the technicians and workers to work and also making lifging arrangement for cutting the outfall delivery pipe and fitting new pipe including fabrication of pipe. p/job 1

2 Cost for deploying all labours, technicians and tools for detachning and lifting of heavy flap valve of deelivery pipe with the help of chain pulley block. p/job 1

3 Cost for providing gas cutter for cutting out the rotten delivery at out side in outfall and also in pump house safely. p/job 1

4 Cost for M.S. plate required for making and fabrication of 36" dia 6mm thick M.S. pipe. M.S. pipe of size ID 914 mm OD 930 mm Length 2134 mm p/job 1

5 Cost for welding the existing flanges to fabricated M.S. pipe at both ends all around in and out to make it leak proof. p/job 1

6 Cost for supplying and fitting of rubber insertion 1/8" thich for pump and delivery flange. P/Kg 12

7 Cost for making and fitting the hinge arrangement for easy operation of flap valve out side the sump. p/job 1

8 Cost for supplying and fitting of S.S. nut bolt of size of size 20 mm dia and 100 mm long with washers for fastening of fabricated delivery to discharge tee of pump. p/job 32

Gr Name Of Work Amount

Gr-06 (1) Name of Work :- Estimate for the work of Annual Repairing, maintenance & operation of electro-mechanical accessorries of the pump sets installed in storm drainage pumping plant at Rajapur Old for monsoon 2026 for the year 2026-27.

Gr-06 (2) Estimate for the work of Annual Repairing, maintenance & operation of electro-mechanical accessorries of the pump sets installed in storm drainage pumping plant at Rajapur new monsoon 2026 for the Year 2026-27.

Gr-06 (3) Estimate for the work of Annual Repairing, maintenance & operation of electro-mechanical accessorries of the pump sets installed in storm drainage pumping plant at Mandiri old monsoon 2026 for the Year 2026-27.

Gr-06 (4) Estimate for the work of Annual Repairing, maintenance & operation of electro-mechanical accessorries of the pump sets installed in storm drainage pumping plant at Mandiri new monsoon 2026 for the Year 2026-2027.

Project Director (Mech.)

Patna West (Mech.), Works Division,