REPAIRS TO CHOLENAHALLI AND KOLAGATTA LIFT IRRIGATION SCHEME IN HUNSURU TALUK MYSURU DISTRICT

REPAIRS TO CHOLENAHALLI AND KOLAGATTA LIFT IRRIGATION SCHEME IN HUNSURU TALUK MYSURU DISTRICT

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of all materials, machinery, labour, ...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Supply and fixing of 11 kV, 11 kV, DOLO Cutout REC Specification(Dwg No. BESCOM/GM/QS&S/20 Dtd 24.11.2018) complete with all lead and lift, loading and un loading and as per the directions of engineer...

Work of servicing, leak arresting and oil filtration upto 400 KVA power transformers as specified below: a. Removing cable connection of transformer after isolating the supply dismantling the cable co...

Transformer Oil as per IS-335:1993 EHV Grade Transformer Oil - New complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work

GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer completeMinimum Weight of GI Pipe: 7.3 Kg complete with all lead and lift, loading and un loadi...

Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each complete with all lead and lift, loading and un loading and as per the directions of engineer i...

Good Quality Salt for grounding purposes packed in 50 Kg gunny bag complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work

Grounding of equipment with 50 x 6 mm G.I. Flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and conne...

Supplying of Switch disconnector fuse unit(TPN)HRC type(butwithout HRC fuses). With AC-23A duty and as per IS- 13947 complete with all lead and lift, loading and un loading and as per the directions o...

Foam type extinguisher 9 Litre capacity complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work

Water Type (Gas Pressure Type) 9.0 Liters complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work

Carbon Dioxide Type, 4.5 Liters capacity complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work

G.I.Bucket 9 Ltr.capacity complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work

Steel Stands complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work

Supplying and installation of RUBBER MAT 1mtrx1mtr-10mm thick. Complete including cost of materials, labour,usage charges of machinery complete as per specifications complete with all lead and lift, l...

Supplying of 4 feet-PVC Batten with integrated LED light fitting 1 x 4' - 36/40 W with high quality diffuser with Life of 25000 burning hours & 70 percentage lumen maintenance with CRI geater than 80....

6A Three Way socket complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work

16A One Way Switch complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work

Supply of LED Street light luminaire with pressure die casta luminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded poly...

Supplying and fixing telescopic M.S.bracket fabricated by using 0.5m length4" diatelescopic M.S.pipe, with 2"dia 1.5m long M.S.Bracket and are welded with suitable angle, using 6mm thick M.S.sheet, gr...

Supply and fixing of 4 pole power contactor of 300Amps with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13...

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...

Supplying, fixing and wiring 3 Phase Digital Ammeter/Voltmeter complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work

Supplying and fixing Micro process or based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.)3-120sec setting complete with all lead and lift, loading a...

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers complete with all lead and lift, loading and un loading and as per the directions of en...

Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...

Labour Charges only for fixing of 100mm dia double / isolated AIR VALVES (CI tamper proof of PN 16.0)conforming to ISS 14845 - 2000 and as detailed below with required stub and flange, conveying to wo...

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...

Supply and delivery at site brand new best make pressure guage of 100mm suitable for centrifugal pump confirming to latest IS standards complete with all lead and lift, loading and un loading and as p...

Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12 m...

Providing Ball bearing as per ISI specifiction with guarantee period of not less than 12 months for 120 HP complete with all lead and lift, loading and un loading and as per the directions of engineer...

Providing thrust bearing as per ISI specifiction with guarantee period of not less than 12 months for 120 HP complete with all lead and lift, loading and un loading and as per the directions of engine...

Ring spanners : 12 nos. per set complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work

Pipe wrench : 24 inches size complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work

Pipe wrench : 18 inches size complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work

Double end spanner : 12 nos. per set complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work

Hack saw frames +B185 complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work

Rubber hand gloves : 15 kV tested complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work

Insulated cutting pliers : 12 inches size complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work

Line live tester complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work

Screw driver : 18 inches size complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work

Screw driver : 12 inches size complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work

Hammer 8 Lbs complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work

AC Leakage Clamp meter (mA) (DCM 10 A) complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work

Multimeter electronic type complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work

Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12 m...

Providing thrust bearing as per ISI specifiction with guarantee periodof not less than 12 months. Bearing cost for 80 HP complete with all lead and lift, loading and un loading and as per the directio...