REPAIRS TO ROADS AND ROAD FURNITURES UNDER GE (NORTH) BANGALORE

Amount

Material and Labour for Repair to pot holes not exceeding 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc, cutting around edges to at least 25mm in depth, making good by applying a tack coat of bitumen emulsion (RS-1, grade confirming to IS :8887 at 3.00 kgs/10Sqm), putting in premix as specified for thin bituminous carpet (2cm thick), well rammed and sealed with premix sand seal coat (6.8kg of binder with 0.06cum of sand ),again well rammed (Including supply of premix binder and sand ), depth of potholes not exceeding 30mm complete all as specified and directed

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and directed

Material and Labour for applying tack coat with bitumen emulsion (RS-1, grade confirming to IS :8887 at 3.00 kgs/10Sqm) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per clause 503 of MORTH complete all as specified and directed

Material and Labour for Bituminous premix semi dense asphaltic concrete, 30mm consolidated thickness with 5.5% binder content (Paving bitumen of VG-30) by weight of total mix, mixed in hot mix plant, rolled with tandem vibratory roller and compacted to required camber and gradient by using mechanical paver all as specified and directed.

Supply and Fixing solar cat eye reflective type of metal body alloy of size 100mmx100mmmmx20mm with PAMA striplens reflector of model No DA- 972 fixed with and including MS stud of suitable size as as per manufactures instructions etc, all as specified and as directed. Make : M/S automat road safety Pvt Ltd or equivalent of dark eye/ Sun eyes/ M/S Texla plastic & metal Pvt Ltd.

Material and Labour for preparation of new or previously treated surfaces to receive thermostatic paint laying of road marking with hot applied Thermoplastic compound with Reflectorizing glass beads on Bituminous surface, 2.5mm thick including reflectorizing glass beads @ 250 gms per sqm area is exclusive of surface applied glass beads as per IRC:35-1997. The finished surface to be level, uniform and free from steaks and holes all as specified and as directed. Note : 1. Unit rate quoted by the contractor include for provision of red signals to keep off trafic from work, cleaning road surface and working during odd hours when traffic is light. 2. The line marking shall stand out boldly and solidly without showing any signs of scratch marks or surfaces underneath, if necessary the surface shall be remarked after removal of existing treatment until the desired result is obtained.

MANJUNATHA CONSTRUCTIONS