CA NO. GE (P)AF/GUR-18/2022-23 SPECIAL REPAIR TO STATION INFORMATION HALL AND AIR WARRIOR RECREATIONAL CLUB AT AF STN GURGAON UNDER GE( P) AF GURGAON.

Amount

Schedule-A (B/R Portion)

Taking down cement plaster, any description on brick walls or on concrete surfaces including racking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s) and disposed off outside MOD land , complete all as specified and as directed.

M&L for rendering 15 mm thick in cement motar 1:6 on brick work or concrete surfaces, finished fair & even without using extra cement all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick in cement motar 1:4 on brick work or concrete surface finished fair & even without using extra cement all as specified and directed by Engr-in-Charge.

M&L new plastered surface applying two coat of weather proof exterior grade over one coat of primer and two coat of JK/Birla Cement putty cement base putty all as specified and directed by Engineer-in-Charge

Preparing New Plastered Surfaces of WALLS and applying TWO COATS of DISTEMPER OIL EMULSION (OIL BOUND WASHABLE DISTEMPER) over a Coat of 1mm thick wall care putty, complete all as specified and as directed. by Engineer-in-Charge. (Note:- work will be strictly executed by mechinised means/ tools as required for smart periodical services)

Dismantling of brick work built in cement mortar including all qoins, arches, pillars, etc.complete all as specified and directed by Engr-in-Charge.

M&L for Brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

Dismantling of AC sheet from the roof and removal from site and all as directed by Engr in charge

S&F 0.5 mm thick pre coated thick galvalume aluminium zink coated GI based corrougated steel sheeting of any colour having tansile strength of 550 MPA as in roof covering/glading to wall fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 1.00 mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws includng dismeteling old sheet as specified

Dismantling framed trusses span n exc 10M as specified and directed by Engr-in-Charge

Dismantling framed work timber scantlings 40 sq. cm and over in section, in any position all as specified and directed by Engr-in-Charge.

M&L timber framed second class wrought hard wood in scantling for roof trusses (framed), trussed purlins crane gantries, rails and fastenings and similar works all as specified and directed by Engr-in-Charge.

M&L for Preparing surface of wood and wood based materials, new or old, applying two coat of creosote of any description and girth, not otherwise described and treated with

Dismantling of wall / ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thiockness including cover fillets all as directed by Engr in charge

S&F 8 to 10 mm thick densified regular edged eco friendly light weight calcium silicate false ceiling tiles size 600x600mm including anodised aluminium snap grid frame work for false ceiling size of grid 605x605 mm all as specified with all accessary as per manufactureer's instruction all as specified and directed by Engr-in-Charge.

Supply only water proofing liquid compound mix in cement concrete complete all as specified and directed .Make Dr fixit, M/S cico, Fosroc or equivalent from make specified in 'List of make' .

Dismantling of wall/ floor tile including backing coat any description or any thickness led beded and pointed in any cement motar and removal to out of MD land all as specified and directed by Engr-in-Charge

M&L for glazed ceramic coloured designer concept tiles matching with existing tile 350x250x7 or 450x350x7mm size as in walls set and jointed in neat cement slurry over 10mm thick recuing in cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc all as specified and as directed by Engr-in-Charge. Make:- AGL/Somany/Kajaria

M&L non skid ceramic coloured tile 7 to 8mm thick (square/rectangular area of each tiles exceeding 0.11 Square but not exceeding 0.18 Sqm in floor over 10mm thick screed bed in cement motar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the tile all as directed by Engr-in-Charge.

M&L for vitrified tiles 7 to 8mm thick dark shade glossy finished (squar / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and jointed in white/coloured cement to match over and including 15 mm thick screed bed in cement mortar in 1:4, complete all as specified and as directed by Engr-in-charge.Make:- AGL/Somany/Kajaria or equivalent from make specified in 'List of make' .

S&F in repair vertical blinds for windows/door/ventelator of any colour and pattern as approved by Engr-in-Charge including connected items ie. rod, hook etc and complete fitting all as specified and as directed by Engineer-in-Charge.

Dismantling of mild steel work of any description not other wise provided of all as direted by Engr-in-Charge.

S&F for MS angle iron as in posts, gate, door frame and struts, window grill in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing with mesh etc including all necessary drilling bolting or riveting etc and similar work confirming to Fe-290 (Gde-E-165 quality-B. Note:-Posts/struts of angle iron made to shape shall be welded to existing angle iron bracket of security wall, contractor shall make his own arrangement for welding for boundary wall by using gen sets or any alternative arrangement all as specified and directed by Engr-in-Charge.

M&L Preparation of new steel surface exc 10 cm width/girth one coat red oxide primer and two coat synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats and frames with shutters (without taking out shutters from the frames) exc. 1.5 sqm but n exc. 4 sqm each, complete all as specified and directed by Engr-in-Charge.

Taking down Chowkhats or frames n exc 1.5 sqm each without taking of shutter from the frame all as specifed and directed by Engr-in-Charge.

S&F 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge.

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.

S&F polyester powder coated aluminium frame/chowkhat for door shutter of section 101.0x44.4 mm of gauge 16 fixed in brick masonery or conrcrete work by necessary drilling and rawl plug aggangement etc incl polyester powder powder coated aluminium door shutter top rain and middle rail of section 85x44.4 of 16 gauge and bottom rail of section 150x44.4 mm 16 gauge (all section of such type having arrangement for fixing glass/prelaminated board on one or both sides as required) incl aluminium powder coated fittings such handle (2 Nos each shutter), tower bolt, locks (mortise type lock) glazing clips, rubber packing, anodised aluminium snap beading screw, hinges type B-21 150mm long (3 Nos each shutter) etc and one door stopper two legged with each leaf (shutter) complete (Glass and prelaminated board/ DG grill to be measured separately under appropriate item of sch A) complete all as specified and directed by Engr-in-Charge (Make of aluminium section shall be hindalco/Jindal and equivalent).

S&F polyester powder coated aluminium frame/chowkhat for window/ ventilator of section 63.5x38.1 mm of 16 guage fixed in brick masonery or conrcrete work by necessary drilling and rawl plug aggangement etc incl polyster powder coated of any colour podwer coated aluminium window & ventilator shutters side hung type without sash bars aluminium with section 44.4x44.4mm of 16 guage including necessary jointing cleats, glazing clips, rubbers packing powder coated anodised aluminium snap beading, screw, powder coated aluminium anodised fittings such as peg stays 150mm long (1Nos), Hinges type B-21 100mm long (2Nos) suitable handle 1 Nos complete all as specified and directed by Engineer-in-Charge. (Glass and wire mess/ DG grill to be measured separately under appropriate item of sch A)

M&L, for 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on both side with decorative choice laminations fixed between aluminium section with and including snap fitting aluminium clips of polyester powder coated along with the glass with rubber gasket, complete all as specified and directed by Engr-in-Charge. Make. Anchor/Kitply/Novapan

S&F powder coated aluminium grill DG 208 design as per approved pattern including aluminium beads etc complete all as specified and directed by Engr-in-Charge

S&F stainless steel wire cloth with 8% nickle . 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed by Engr-in-Charge.

Demolition in cement concrete ground floor and paving nexc. 15 cm thickness (below above ground floor ) all as directed by Engr-in-Charge.

S&F in repairs vitreous china coloured half stall urinal with brass chromium plated brackets , fitting and waste coupling, CP bottle trap , urinal spreder , PVC connection etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of cement concrete in type C-1 (1:3:6) including P traps complete all as specified and as directed by Engineer-in-Charge.

S&F in repair one piece square model water closet floor mounted Square Commode (White) S trap - white ceramic western commode (white) shape-Elongated type, size 685x360x720mm weight not less 20 Kg 'S' trap and slim seat cover & fitting as per Cera Cat Part No S1013164 or equivalent complete all as specified and directed by Engr-in-Charge.

M&L plain cement concrete type C-2 1:3:6 using 40mm graded crushed stone aggregate as in foundtions, filling and mass concrete complete all as specified and directed.

M&L cement concrete type D-2 1:4:8 using 40mm graded crushed stone aggregate as in foundtions, filling and mass concrete complete all as specified and directed.

Supply and laying of 16 mm dia CPVC pipe SDR 11 & Plain including CPVC pipes SDR-11 fittings in trenches complete all as specified and directed by Engineer-in-Charge.

Supply and laying of 20 mm dia CPVC pipe SDR 11 & Plain including CPVC pipes SDR-11 fittings in trenches complete all as specified and directed by Engineer-in-Charge.

Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exc. 20cm girth in Stone, concrete block or slab walls omplete all as specified and directed by Engineer-in-Charge.

S&F in repair Rotational moulded Polyethylene (HDPE) Water Storage Tank 1000 LITRE Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I, including tank nipple, union and Lowering of unserviceable Water Storage Tank with Float Valve of any description complete all as specified and directed by Engineer in charge.

S&F in repair chromium plated fancy type foam flow Bib taps 15 mm dia cast copper alloy with crutch or handle screwed down, screwed for iron pipe complete all as specified .Make : Jaquar/Prayag/Marc.

S&F in repair pillar taps 15mm bore cast copper alloy fancy type chormium plated butter fly handle screwed down including complete all as specified and as directed by Engineer-in-Charge. Make:- Marc, Cera, Jaquar

S&F in repair angle 15mm bore (for iron pipe) fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends complete all as specified and as directed by Engineer-in-Charge.

S&F, in repair angular stop cock, 15 mm dia fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or handle screwed both ends for iron pipe or for union complete all as specified & directed by Engr-in-Charge .

S&F in repair for vitreous china wash basin hand white flat backsize 550x400 including cutting for and pinning in ends of brackets including fixing of 32 mm low dencity polylethyne pipes (LDPE)of pressure rating 6kg/cm2,cupling ,PVC connection with 15 mm dia PTMTcheknuts ,brackets all complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 60 cm long PVC connection with two nos PTMT nut and rubber washers suitable for 15mm bore GI Pipe of existing one complete all as specified and as directed by Engineer-in-Charge.

S&F repair in of PTMT waste pipe 31/32 mm bore 80 cm long complete all as specified and as directed by Engineer-in-Charge.

S&F Towel rail of size is 600mm long of stainless steel fixed with and including Chromium plated brass screws and wooden/plastic cleats all as specified and directed by Engr-in-Charge.

S&F in repair health faucet (brass) with hook & 1.5mtr tube all as specified and directed by Engr-in-Charge. Make : jainko/ shakti/prayag

S&F 16 mm thick granite (any type) Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including mirror polishing and bull nosing edging in any position any shape etc all as specified and directed by Engr-in-Charge.

M&L for 75mm thick Cement concrete type D2 1:4 :8 (40mm graded stone aggregate) as in sub base finished even smooth with broom finished w/o using extra cement, laid in alternate bay all as directed by Engr-in-charge.

M&L 60 mm Machine pressed pre casted pressed cement concrete inter locking paver blocks glazed coloured up to 6mm on the top in any shape and size, strenth not less than M-35 including 25mm thick sand cushioning all as directed by Engr-in-charge

M&L for pre cast Kerb stone with plain fair faces 300x150x300 mm depth of PCC 1:1 ½ :3 of shape as approved including all required excavation, embedding in ground and removing surplus spoil upto 50 Mtr distance completed all as specified and as directed by Engr-in-Charge.

S&F in repair Adrain Aeron frosted Glass shelf (22x6") complete all as specified and directed by Engr-in-Charge. Make:- Nixo/hilife cat part No ES01A or equivalent our of makes specified and directed by Engr-in-Charge.

S&F in repair Adrain Aeron frosted Corner glass shelf (12"x12") complete all as soecified and directed by Engr-in-Charge. Make:- Nixo/hilife cat part No ES03A or equivalent our of makes specified and directed by Engr-in-Charge.

S&F in repair 10ltr capacity PVC valveless syphonic action type flushing systern low level white with inlet ball valve ,float & handle including brackets complete all as specified and as directed by Engineer-in-Charge.

S&F in repair stainless steel floor grating with hole or without hole all as specified and directed by Engr-in-Charge.

M&L for cement concrete 1:3:6 type C-1 (20mm graded stone aggregate) 75 mm thick in plinth protection and courtyard, finished cement surfaces even and smooth with out using extra cement , complete all as specified and as directed by Engineer-in-Charge.

S&F in repair ISI marked hydraulically regulated door closer aluminium (extruded section) body type complete suitable for door shutter width upto 1.50 mtr and weight between 61 to 80 kg complete all as specified and as directed by Engineer-in-Charge.

E/M Schedule

Taking down copper/aluminium point wiring (light points) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for the above items should be made as per conditions seperately) and making good disturbed surfaces of walls. floors, etc. complete all as directed

Taking down copper/aluminium submain wiring complete, including conduits of any kind, and removing materials to store for keeping in safe custody or for taking credit (credit for the above items should be made as per conditions seperately) and making good disturbed surfaces of walls. floors, etc. complete all as directed

Taking down main switches, distribution boards etc of any type and capacity along with the existing boards, and removing the same from site and making good the disturbed surfaces/portion of walls etc. all as directed.

M&L for point wiring complete with 1.5 Sqmm (nominal area) PVC insulated, multi stranded, FRLS copper conductor cable unsheathed in and including PVC conduit with all fittings medium grade ISI Marked and PVC insulated FRLS copper conductor cable of size 1.5 sq mm as earth wire, connected to common earth dolly suitable for mounting modular switches including modular metal flush boxes and modular face plate complete all as specified and as directed by Engr-in-charge, (The works includes cutting of chasis and making good disturbed surfaces and rate deemed to included in quated rate):- Make: Havells/Polycab/Finolex

One light point controlled by one way modular switch all as specified and directed.

One ceiling/mounted fan point controlled by one way modular switch all as specified and directed.

One exhaust/Ventilation fan point controlled by one way modular switch all as specified and directed.

One 3 pin modular socket outlet 5 amps on the same board with the other switches, with cable 1.5Sqmm size.

All as per Srl item No. 69.04 above but on independent board

All as per the item ser No 69.00 here in but with copper conductor cable for 3pin socket outlet,15 Amps independent with cable 4sqmm size and 4 sqmm earth continuity conductor, complete all as specified and as directed by Engr-in-charge.

M&L for concealed sub main wiring three run of 06 sqmm PVC insulated unsheathed copper conductor cable ISI marked 1100 volts grade drawn in and including PVC surface conduit suitable size of medium grade fixed on wall/ceiling/passing through wall etc connected as required at site complete all as directed. Note- (a) Two runs of single core cable with one run of earth continuity cable including PVC conduit and its accessories will be measured and paid as one unit). (b) Make disturbed surface good to wall/floors as existing surface.

Supply and fixing ceiling rose surface Bakelite 65 x 50mm, 3 terminal complete all as specified and directed.

Supply and fix modular Fan step regulator, 120W - 2 module complete all as specified and as directed by Engineer-in-Charge.

Supply and Fix Exhaust fans Single Phase 230/240 V of size 300 mm swep with louver complete all as specified and as directed by Engineer-in-Charge. Make: Bajaj/Crompton

Supply and Fix LED tube light along with fixture, 20 Watt complete all as specified and as directed by Engineer-in-Charge.Make:Havells/Polycab/Crompton

Supply & fix LED down lighter 2'x2' , 35 W connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed. Make:Havells/Phillips/Eveready/Crompton or from the make specified in list of make.

Supply & Fix modular Socket, 6A-2/3 Pin combined 2 module complete all as specified and as directed by Engineer-in-Charge.

Supply & Fix modular switch socket combination outlet 3 pin, 5 Amp flash type complete all as specified as and directed by Engineer in Charge

Supply & fix switch socket combination 16A, 6Pin, 3Module independent all as specified and as directed

Supply & fix modular switch 1way 6A,1 module complete all as specified and as directed by Engineer-in-Charge.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and as directed by Engineer-in-Charge.

Hanging only exhuast/mounted/ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed by Engineer-in-Charge.

Supply and fix sheet metal enclosures for DB's when MCBs to be used single pole & neutral 8 way with 200 Amps rated bus bar complete all specified and directed. Make: Havells/Polycab/C&S

S&F MCB SPN 240V 32 amps complete .Make- Legrand/C&S/Havells

S & F of MCB suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10KA (6-32 Amps as specified ,Make- Legrand/C&S/Havells

Dismantling and taking up old existing unserviceable GI earth plate with GI strip earthing and connected items and making of good the existing surface complete all as specified and as directed by Engr in charge.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point/DB box with watering arrangement, wire mesh, GI pipe 50mm dia for watering and 40mm dia medium grade for protection of earth lead. RCC pit 1:3:6 type C1 and RCC chamber cover in 1:2:4 type B1 of size 550 x 550mm with 8 mm dia TMT bar of 100mm C/C both ways all as specified or indicated including testing on completion as specified and as directed by Engr-in-charge

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core complete all as specified and as directed by Engineer-in-Charge.

Excavation in trenches in soft/loose soil , not.exc 1.5 mtr wide and not.exc 1.5 mtr deep and getting out in soft/loose soil for laying of cable/foundation of pole and stay etc in complete all as specified and as directed by Engineer-in-Charge.

Removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above ground level from starting point complete all as specified and as directed by Engineer-in-Charge.

Returning filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed by Engineer-in-Charge.

M&L for sand cushioning in trenches for protection of LT under ground cable including watering and consolidation complete all as specified and as directed by Engineer-in-Charge.

Supply and laying well burnt sub class ‘B’ bricks, locally available in trenches for protection of underground cable complete all as specified.

Supply, installation, commissioning of Water cooler fully stainless steel, electric driven single phase having approx storage of 40ltrs and nominal cooling capacity of 40Ltrs/Hrs complete all as specified and as directed by Engineer-in-Charge.

Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 4000 CuM per hour (or nearest size) stainless Steel body fully powder coated complete all as specified and as directed by Engineer-in-Charge.

Note The amount of Rs 80,850.00/- against Schedule of Credit on Page No 141 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance

M/S ujjwal associates

PAWAN KUMAR