Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.8 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹38.3 L+₹1.5 L (4.14%)Rejected-Finance 27 2ND FLOOR CITY CENTRE CLUB ROAD RANCHI 834001 JHARKHAND | RANCHI | JHARKHAND | 834001 | L2 | Rejected-Finance Quoted amount is more than L1 | |
| 3 | L3₹39.2 L+₹2.4 L (6.60%)Rejected-Finance | L3 | Rejected-Finance Quoted amount is more than L1 |
Tender Value
₹34.9 L
EMD Value
₹69,800
Closing Date
13 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major S Rakesh
Garrison Engineer Ranchi, 7th Club Road Ranchi, PIN-834001
SRW OF GOVTMDACCN BLDG NO P14 1TO3(JCO) AT URAN VIHAR N RAISING IN HT OF BDYWALL OF 3.5 FT TO 7FT (420M) N PROVN OF 01GATE WITH WICKET GATE WITH BARBED WIREFENCING FOR OFFRS MESS COMPLEX AT 1 (I) RO FLT UNDER GE RANCHI
2022_MES_548737_3
8200/1426/E8
Open Tender
Civil Works
Item Rate
180 days
Ranchi
Class D Cat a (i)
6 documents required · 6 mandatory
₹500
GE Ranchi
₹69,800
Yes
6 Dec 2022
30 Sept 2022
15 Oct 2022
1 Oct 2022
13 Oct 2022
1 Oct 2022
Amount
Demolition of cement concrete incl (unreinforced) in ground floors and paving n exc 15 cm thickness (Below or above ground level), complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided for, complete all as specified and directed.
Taking down existing chowkats or frames, without taking out shutters, from the frame, n exc 1.5 Sqm, complete all as specified and directed.
Taking down existing chowkats or frames , without taking out shutters, from the frame, exc 1.5 Sqm but not exc 4 Sqm each, complete all as specified and directed.
M&L for 75mm thick PCC type C-2 1:3:6 (using 40mm graded stone agg) as in plinth protection/Path/floor finishing surface of concrete topping even and fair without using extra cement, complete all as specified and directed.
Demolition of brick work built in cement Mortar, complete all as specified and directed.
M&L brick work with sub class ‘B’ old sized bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed.
All as per item No 7 above but except bricks.
M&L Brick work with sub class 'B' Brick straight or curved on plain to any radius in half brick thick wall built in cm 1:4, complete all as specified and directed.
All as per item No 9 above but except bricks.
M&L extra for forming fair finishing to drain or channel, 30 cm inner girth in cement concrete, with using extra cement, including forms, moulds, mitred/stopped ends etc,complete all as specified and directed.
Taking down cement plaster of any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbinng down with water, etc, complete all as specified and directed.
M&L rendering 10mm thick in CM 1:6 on fair faces of brick work , finished even and smooth without using extra cement, complete all as specified and directed.
M&L rendering 15mm thick in CM 1:4 on fair faces of brick work , finished even and smooth without using extra cement, complete all as specified and directed.
M&L rendering 15mm thick in CM 1:6 on fair faces of brick work , finished even and smooth without using extra cement, complete all as specified and directed.
M&L rendering 5mm thick in CM 1:3 on fair faces of concrete finished even and smooth in ceilings, complete all as specified and directed.
M&L preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty, complete all as specified and directed.
M&L preparation of complete removal of existing treatement from old plastered surface of wall and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty, complete all as specified and directed.
M&L applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resisteance as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade ( Company Depot tinted) with silicon additives @ 1.43 litre /10 sqm over and including priming coat of exterior primer appplied @ 0.90 litre /10sqm over a coat of wall putty on new plastered wall surfaces incl preparation, complete all as specified and directed.
M&L applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resisteance as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade ( Company Depot tinted) with silicon additives @ 1.43 litre /10 sqm over and including priming coat of exterior primer appplied @ 0.90 litre /10sqm over a coat of wall putty on old wall surfaces incl complet removal of existing treatment, complete all as specified and directed.
S&F factory made solid PVC door frame of size 48 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete as per manufacturer’s specification and drawing.
S&F factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of mild steel tubes for top & bottom rails, Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm with steel inside with solvent cement for stiles and plain colour PVC sheet for top rails, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, fixing in the frame at site as per specification, drawing.
M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete, of frame size 165 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified
S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, look strike plate etc completed, size of frame 105x 60mm, complete all as specified and directed.
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (style), with particle board core and 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.
S&F factory made wire gauzed PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded both side prelam PVC Sheet and stile & rails feathered at edges having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail and bottom rail on either side and as gap inside for top rail and bottom rail.panel will be wire gauze in lieu of prelam sheet ,the wire gauze shall be wrapped on an additional square 8mm M.S.Solid tube and this tube shall be welded to M.S Tube.the wire gauge shall be stretched to tighten firmly supplying and fixing in the frame at site as per specification and drawing, complete all as specified and directed.
S&F in repair Harrison rails (Curtain rails), mild steel, chromium plated including with supply & fixing brackets, stops, rollers etc
S&F in repair aluminium anodised tubular towel rail 20mm dia D Type, 60 cm long between flanges, complete all as specified and directed.
S&F 100 mm size butt hinges of medium weight cold rolled mild steel
S&F extruded aluminium anodised alloy handles, fabricated type, size of handle 150 mm, complete all as specified and directed.
S&F aluminium, anodized 200mm long barrel tower bolts of extruded section, complete all as specified and directed.
S&F aluminium alloy, anodized slidnig door bolt with hasp and staple and fixing clips of sheet, cast or extruded section, and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 300 mm, complete all as specified and directed.
S&F 75mm size butt hinges of medium weight cold rolled mild steel, complete all as specified and directed.
S&F extruded aluminium anodised alloy handles, fabricated type, size of handle 125 mm, complete all as specified and directed.
S&F aluminium, anodized 100mm long barrel tower bolts of extruded section, complete all as specified and directed.
S&F 150 mm ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.
Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 in brick walls for concealed water tubing, cutting not exc 10cm girth, complete all as specified and directed.
Taking up or down 25 mm steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.
S&F GI tubing 25mm dia GI medium grade with all new fittings and fixed to wall/ floor, complete all as specified and directed.
Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.
S&F GI tubing 20mm dia GI medium grade with all new fittings and fixed to wall/ floor, complete all as specified and directed.
Refixing of old serviceable steel water tubing 20 mm dia in position complete with new fitting in wall / floor, complete all as specified and directed.
Taking up or down 15mm steel tubing and connections including cleaning for refixing or removal to store complete all as directed.
S&F GI tubing 15mm dia GI medium grade with all new fittings and fixed to wall/ floor, complete all as specified and directed.
Refixing of old serviceable steel water tubing 15 mm dia in position complete with new fitting in wall / floor, complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. including brushing neat cement slurry with 3.0Kg of Cement per Sqm, complete all as specified and directed.
Dismantling floor, hearth or wall tiling includiing cemenet mortar bedding, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
M&L screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 for fixing tiles, complete all as specified and directed.
M&L non skid ceramic joint free coloured tiles 7-8 mm thick (square or rectangular) area of each tile exc 0.18SM but not exc 0.38 SM in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement. to match as in floors, complete all as specified and directed.
All as per item No 48 above but on vertical surfaces such as skirting, dado, risers to steps etc, complete all as specified and directed.
M&L non skid ceramic joint free coloured tiles 7-8 mm thick (square or rectangular) area of each tile exc 0.11 SM but not exc 0.18 SM in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement. to match as in floors, complete all as specified and directed.
M&L screed bed or bedding layer of mortar 10 mm thick in CM 1:4 as backing coat for laying tiles in dado , on brick or concrete surfaces, complete all as specified and directed.
M&L glazed ceramic coloured tiles in vertical surfaces 350 X 250X 7/ 450x350x7mm th set and jonnted in cement slurry and pointed in white or colour cement to match, complete all as specified and directed.
Demolition of stone slabs and tiles laid dry or laid dry and pointed of any description or thickness in floors, aprons etc, complete all as specified and directed.
M&L Granite 18 to 20 mm thick (of any type ) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.
S&F framed work such as grills, gratings etc. With ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming Fe 290, Gde -E -165, complete all as specified and directed.
M&L in repair for 75mm dia PVC (SWR) trap , plain with grating including jointing with solvent cement, complete all as specified and directed.
S&F in repairs PVC valve less,low level flushing cistern, 10 ltr capacity, white symphonic action with inlet, ball valve, float and handle including 32mm PVC flushpipe and brackets, complete all as specified and directed.
S&F in repair 15mm dia bib taps,cast copper alloy chromium plated fancy type with crutch or butter fly and screwed for iron pipe or for brass ferrule and fixed.
Supply only 15mm bore pillar taps chromium plated cast copper allow fancy type with screwed shancks and fixed.
S&F in repairs stop valves fancy type of 15 mm dia chromium plated long shank and cup (concealed type) screwed both ends for iron pipes or for unions, complete all as specified and directed.
S&F in repairs stop valves (angle cock) fancy type of 15 mm dia chromium plated screwed down, high pressure, with crutch or butter fly handle screwed both ends for iron pipes or for unions, complete all as specified and directed.
S&F PVC connection 450mm long with two brass coupline.Pipe of 15mm dia of pressure tating 6kgs/Cm2, complete all as specified and directed.
S&F in repairs Brass Chromium plated shower rose with swivel joints, 125 mm size, including fixing to stel pipe or union, complete all as specified and directed.
S&F 32 mm dia High density polyethylene pipes (HDPE) of pressure rating 6Kgf/cm2 for kitchen sink and wash basin fixed in repairs, complete all as specified and directed.
S&F PVC (SWR) 110mm bore dia pipes single socketed, in any length with rubber ring joints, fixed to walls including taking out old PVC unserviceable pipes, complete all as specified and directed.
S&F PVC (SWR) 110mm bore bends with access door, complete all as specified and directed.
S&F PVC (SWR) 110mm bore junction single, (Single T) equal or unequal, complete all as specified and directed.
S&F PVC (SWR) bends 110mm bore, complete all as specified and directed.
S&F PVC (SWR) vent cowl 110mm bore, complete all as specified and directed.
S&F PVC (SWR) 75mm bore dia pipes single socketed, in any length with rubber ring joints, fixed to walls including taking out old PVC unserviceable pipes, complete all as specified and directed.
PVC (SWR) bends 75mm bore, complete all as specified and directed.
S&F steel windows with side hung shutters including projection type hinges with one no. steel handle made of 25x3mm FI approx 200mm long in each leaf and two nos MS tower bolt 150mm long in each leaf with locking device, complete with glazing bars, dovetailed or welded incl cutting holes and making good with brick and plaster, complete all as specified and directed.
All as per item No 72 but without glazing bars complete all as specified and directed including sash bars for fixing wire mesh, complete all as specified and directed.
S&F Steel ventilator in repair with top hung shutter including hinges steel peg stay, complete all as specified and directed.
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty/ glazing pins/spring clips in square n exc. 0.5 sq. m in each pane, complete all as specified and directed.
S&F 4 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane, complete all as specified and directed.
M&L stainless Steel wire cloth for 0.56 mm nominal dia of wire & average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples etc, complete all as specified and directed.
M&L for preparation of new steel surafces of any description not otherwise described, over 10 cm width or girth, priming with a coat of red oxide primer and applyinng 2 coats of synthetic enamel paint of approved shade, complete all as specified and directed.
S&F in repairs sink with drainage board made of stainless steel 1mm thick kitchen with plug washers and waste coupling and pipe incl cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x330x160 mm, complete all as specified and directed.
S&F stainless steel plate rack 1mm thick of size 750X600mm and depth 250 mm , fixed on wall surface as per manufacturer's instruction and making good the surfaces, complete all as specified and directed.
S&F in repairs Vitreous china white wash hand basin flat back of size 550x400mm, with plug washers and waste coupling cutting for and pinning ends of brackets, complete all as specified and directed.
S&F in repair vitreous china pedastal type water closet, white (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe etc complete and making good to floor.
S&F in repairs Health fauset (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook incl making connections and fixed in position complete in all respect as specified.
S&F in repair plastic water closet seat cover, white or black, closet pattern with recessed bottom, and cover and mild steel steel chromium plated or aluminised hinging device, complete all as specified and directed.
S&F 32 mm dia waste/flush pipe for urinal and WHB, complete all as specified and directed.
M&L providing, cement concrete type B1 1:2:4 (20 mm graded aggreate) in filling of pressed steel frame, coping, fixing of hold fast and water troughs and the like including weathering etc similar work, complete all as specified and directed.
All as per item No 87 above but reinforced cement concrete as in cooking slab, complete all as specified and directed.
M&L Mild steel bars 10mm dia TMT Bars and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to, complete all as specified and directed.
All as per item No 89 above item but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed.
Dismantling water tanks exc 250 & n exc 500 litres removing to store, complete all as specified and directed.
S&F 500 Ltrs capacity Rotational moulded polythene water storage tanks, two layered white colour (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed.
S&F 25 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule, complete all as specified and directed.
S&F Gun metal globe or Gate valves 25 mm bore with iron wheel head, screwed both ends for iron pipe or for pipe or for unions and fixed, complete all as specified and directed.
S&F Gun metal globe or Gate valves 20 mm bore with iron wheel head, screwed both ends for iron pipe or for pipe or for unions and fixed, complete all as specified and directed.
S&F 40 mm High density polyethylene pipes (HDPE) of pressure rating 6 kgf/sqcm incl all fittings such as bend fixed complete to walls, ceilings or in floor etc including taking out old PVC unserviceable pipes, complete all as specified and directed.
Demolition of Brick tiles or terracing tiles, single layer on roofs, complete all as specified and directed.
M&L rendering 10 mm thick in CM 1:3 on fair faces of brick work/concrete surface using polymers based liquid water proofing compound as in roof, complete all as specified and directed.
Supply only liquid water proofing compound as per manufacture instruction, complete all as specified and directed.
Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of grooves with cement mortar 1:3, complete all as specified and directed.
M&L applying evenly a tack coat of Industrial Bitumen 85/25 grade @ 1.20 Kg per sqm meter as in roof complete all as per manufacturer instrcution, complete all as specified and directed.
M&L laying APP based polymeric membrane minimum weighing 3kg/ sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) including bitumen primer @ 0.3 Kg per Sqm by torch application method (overlap while torching shall be 75 mm on length and 100mm width side). All angles & abutments should sealed with extra care to ensure full bondage and cutting out grooves where necessary as per manufacturers instructions, complete all as specified and directed.
M&L cement concrete tiles 25cm x 25cm x 20-22mm thick machine pressed , laid over a bedding layer of 20mm screed in CM 1:4 as in roof cut and polished. The CM shall be mixed with polymer based liquid water proof additive @5% by weight of cement or as per manufacturer’s instructions and tile joints shall be filled with polymer based cement proof joint filler manufactured by approved company, complete all as specified and directed.
M&L PCC 1:2:4 type B0 using 12.50 mm aggregates as in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed.
M&L extra over rendering on plastering for walls/roof facia sides in isolated width not forming part or general plastering n.exc 15 cm, complete all as specified and directed.
M&L cement concrete type D-2, 1:4:8 (40 mm graded aggregate) 100 mm thick as in Sub-base of floor, complete all as specified and directed.
M&L machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade laid over sand cushioning, complete all as specified and directed.
M&L sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.
M&L RCC (Nominal Mix) Type B-1, 1:2:4 using 20 mm graded stone aggregates as in beams, cantilevers, bressummes, lintels over 1.5 m span, complete all as specified and directed.
Use & waste frame work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.as in shelves, complete all as specified and directed.
S&F (Mild steel misc works) as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc including all necessary works conforming to Fe-290 Gde E-165, complete all as specified and directed.
M&L PCC 1:3:6 for fixing of hold fasts in lintels upto 1.5m clear span cills , steps seismic and other similar bands plinth courses string courses lacing courses parapets and railings upto 60cm in height copings kneelers apex stones , bed plats kerbs not provided for water troughs and the like incl weathering slightly rounded or chamfered angles and throating, complete all as specified and directed.
M&L RCC (Nominal Mix) type B-1, 1:2:4 using 20mm graded stone aggegate as in coping etc (the rates include for use of formwork), complete all as specified and directed.
S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured), complete all as specified and directed.
M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W(Gde E-250) quality-A, complete all as specified and directed.
M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed.
M&L applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10cm width or girth not otherwise described, complete all as specified and directed.
M&L including prepration of newly plastered wall surface and treating two coats of cement based paint over one coat of primer, complete all as specified and directed.
Complete removal of existing treatment over wall and treating two coats of cement based paint over one coat of primer, complete all as specified and directed.
Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site, complete all as specified and directed.
Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface, complete all as specified and directed.
Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades, complete all as specified and as directed.
M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster, complete all as specified and directed for following :-
One light point controlled by one, one way switch 5 Amps.
One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator.
One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.
One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.
One bell/ buzzer point controlled by one push button on the same board with other Switches or independent with cables 1.5 sq.mm size.
Description all as per item No 124 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH, PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH, PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly, complete all as specified and directed.
S&F for Switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed at site, complete all as specified and directed.
S&F for Switch Piano type single pole 15/16 amp, 230 Volts complete all as specified and directed at site, complete all as specified and directed.
S&F socket outlet 2 in 1 , 5 pin, 5 amp, 230 Volts complete all as specified and directed.
S&F socket outlet 2 in 1 , 5 pin, 5/15 amp, 230 Volts complete all as specified and directed at site, complete all as specified and directed.
S&F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting, complete all as specified and directed
S&F for stepped type electronic fan regulator flush type complete all as specified and directed
M&L sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire, complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit
S&F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall, complete all as specified and as directed.
S&F MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve, complete all as specified and as directed.
S&F MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve, complete all as specified and as directed.
Labour only for refixing the celing fan/ Exhaust fan obtained from item No 123 above with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed.
S & F for Decorative wall mounted luminaire made out of polycarbonate suitable for LED bulb and provision of LED bulb 8/9/10 watts, complete all as specified and as directed. Make Havells, Philips, Bajaj.
S&F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting, complete all as specified and as directed. Make :Make Bajaj, Philips, Havells.
M&L earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised earth wire 4mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate No 3 of MES Schdule Part-I connected to earthing point and testing on completion with and including 15mm bore light grade GI protection pipe (upto 7.5 meter beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C-1 with RCC 1:2:4 type B-1, 40mm thick cover reinforced with 8mm dia TMT bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore medium grade GI watering pipe common salt and charcoal filling, necessary excavation and earth work, complete all as specified and directed.
S&F lamp holder, PVC body suitable for batten fitting, completes all as specified and directed.
S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 building security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 40 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade required dia 1.5 mtr long bend to required shape complete all as directed by Engineer-in-Charge. Make- Crompton, Havells, Philips
S & F for LED 10 watts batten aluminium extruded (mirror light) with decorative end caps complete all as specified and as directed. Make- Bajaj, Havells, Philips.
S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make Havells, Philips, Crompton
S& F Bell Multi Music type complete all as specified and as directed
S&F Bell push, flush type, 5 amp complete all as specified and as directed
Bihar traders
Associated Engineers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .