Replacement of damaged toilet doors and windows, repairing of fly proof PVC wire mesh jali at OBC Boys and Girls Hostel including repairing of damaged doors, windows and damaged tiles for Dental College and Nursing College, RIMS, Imphal.

Amount

Providing and fixing white vitreous china pedestal type watercloset (European type W.C. pan) with seat and lid, 10 litre lowlevel white P.V.C. flushing cistern, including flush pipe, withmanually controlled device (handle lever), conforming to IS :7231, with all fittings and fixtures complete, including cuttingand making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid.

Providing and laying Vitrified tiles in floor in different sizes(thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to IS:15622, ofapproved brand & manufacturer, in all colours and shade, laid on20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointingwith grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tilesmust be cut with the zero chipping diamond cutter only . Laying oftiles will be done with the notch trowel, plier, wedge, clips ofrequired thickness, leveling system and rubber mallet for placingthe tiles gently and easily.

Double charge vitrified tile polished finish of size

Size of Tile 600 x 600 mm

Providing and fixing 1st quality ceramic glazed wall tilesconforming to IS : 15622 (thickness to be specified by themanufacture of approved make in all colours, shades exceptburgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thickbed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointingwith grey cement slurry @ 3.3kg per sqm including pointing inwhite cement mixed with pigment of matching shade complete

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushingcistern, with fittings, standard size C.P. brass flush pipe,spreaders with unions and clamps (all in C.P. brass) with wastefitting as per IS : 2556, C.I. trap with outlet grating and othercouplings in C.P. brass, including painting of fittings and cuttingand making good the walls and floors wherever required :

Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm C.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and makinggood the walls wherever required:

White Vitreous China Wash basin size 630x450 mm with a pair of15 mm C.P.brass pillar taps

Providing and fixing mirror of superior glass (of approved quality)and of required shape and size with plastic moulded frame ofapproved make and shade with 6 mm thick hard board backing :

Circular shape 450 mm dia

Providing and fixing P.V.C. Waste pipe for sink or washbasin including P.V.C. waste fittings complete.

Semi rigid pipe

32 mm dia

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sinkas per IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and makinggood the walls wherever required :

Kitchen sink without drain board

610x510 mm bowl depth 200 mm

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5sqm and under,including cutting the patch in proper shape, rakingout joints and preparing plastering the wall surface with whitecement based polymer modified self curing mortar, includingdisposal of rubbish, all complete as per the direction of Engineer-In-Charge.

Providing and applying white cement based putty of averagethickness 1mm,of approved brand and manufacturer, over theplastered wall surface to prepare the surface even and smoothcomplete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface

Water thinnable cement primer

Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as permanufacturers specifications :

Two or more coats applied @ 1.25 ltr/10 sqm. over and includingone coat of Special primer applied @0.75 ltr/10 sqm.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:

One or more coats on old work

Providing and fixing aluminium handles, ISI marked,anodised(anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour or shade with necessaryscrews etc. complete :

Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per IS : 1868 )transparent or dyed to required colour or shade with necessaryscrews etc. complete :

Providing and fixing aluminium sliding door bolts ISI markedanodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with nutsand screws etc. complete :

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

Concealed work, including cutting chases and making good the wall etc.

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes conforming to IS : 13592 Type A including jointing with sealring conforming to IS :5382 leaving 10 mm gap for thermalexpansion, (i) Single socketed pipes

75 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipesconforming to IS : 13592 Type A including jointing with seal ringconforming to IS : 5382 leaving 10 mm gap for thermal expansion

Single tee with door

75 mm bend

Providing and fixing PTMT bib cock of approved quality and colour.

15 mm nominal bore, 165 mm long, weighing not less than 110gms

Providing and fixing P.V.C. low level flushing cistern withmanually controlled device (handle lever) conforming to IS :7231, with all fittings and fixtures complete.

10 litre capacity - White

Providing and fixing CP Brass 32mm size Bottle Trap of approvedquality & make and as per the direction of Engineer-in-charge.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tubeupto 1 metre long with S.S. triangular plate to Eureopean typeW.C. of quality and make as approved by Engineer - in - charge.

ProvidingandfixingPTMTpillarcockofapprovedqualityandcolour.

15 mm nominal bore, 107 mm long, weighing not less than 110gms

Steel reinforcement for RCC work including straightening,cutting, bending, placing in position and binding all complete TMT bars

Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc. and removal of form for:

Suspended floors, roofs, landings, balconies and access platform.

Reinforced cement concrete work in beams, suspended floors,roofs having slope upto 15° landings, balconies, shelves, chajjas,lintels, bands, plain window sills,staircases and spiral stair casesabove plinth level upto floor five level, excluding the cost ofcentering,shuttering, finishing and reinforcement with 1:1.5:3 (1cement : 1.5 coarse sand : 3 graded stone aggregate 20 mmnominal size).

1:1.5:3(1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominial size).

Taking out doors, windows and clerestory window shutters (steelor wood) including stacking within 50 metres lead:

Of area 3 sq. metre and below

Providing and fixing fly proof PVC wire mesh jali to windows with beading.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter

Providing and fixing double scaffolding system.

Providingandfixingpanelledorpanelledandglazedshuttersfordoors,windowsandclerestorywindowsincludingISImarkedM.Sbutthingesbrightfinishedofrequiredsizewithnecessaryscrews,excludingpanellingwhichwillbepaidforseparately,allcompleteas per direction of Engineer-in-charge.

Local best quality Tolhao wood.

35 mm thick shutters

Dismantling tile work in floors and roofs laid in cement mortarincluding stacking material within 50 metres lead.

For thickness of tiles above 10 mm and upto 25 mm

Providing and laying Ceramic glazed floor tiles 300x300 mm(thickness to be specified by the manufacturer) of 1st qualityconforming to IS : 15622 of approved make in colours such asWhite, Ivory, Grey, Fume Red, Brown laid on 20 mm thick CementMortar 1:4 (1 Cement : 4 Coarse sand) including pointing thejoints with white cement and matching pigment etc., complete.

M/S THOUNAOJAM SANA SINGH (BID ID -3210067)

M/S L SHANTIKUMAR SINGH (BID ID -3210078)