REPAIRS TO TILING, SANITARY FITTINGS, ROOF SHEET, FALSE CEILING AND OTHER B/R WORKS AT MD AND OFFRS ACCN AT NAGPUR AREA UNDER GE KAMPTEE

Amount

Dismantling of AC (Corrugated or semi corrugated etc) sheets in roof covering including ridges complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking down cement plaster of any description including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

Dismantling of unserviceable floor, hearth or wall tiling incld cement mortar bedding (but not backing) and removal of rubbish/ debris from premises of MOD Land complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for removal of rubbish/ debris outside MD land complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for removal of rubbish/debris MD land complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.

Dismantling wall and ceiling boards (Fiber, pulp, insulation etc) or insulation boards, slabs, blankets or of any description in any thickness including cover fillets complete all as specified and directed.

Removing existing water proofing treatment on roof including screed bed and scrubbing down with water etc and removing the same beyond premises of MD land complete all as specified and directed.

M&L for roof trusses (framed), trussed, purlins, crane ganbies, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to IS 1161-1979 grade Fe 410W (Gde E-250) quality A complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for 4mm thick for non asbestos, fibre reinforced designer cement ceiling board including Gl frame work for seamless ceiling of size 600mm x 600mm comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

M&L for machine cut cudappa stone slab 20-25mm thick over cement 20mm screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for pre-polished granite (of any type) work (table rubbed and polished) in steps, jams, pillars; cooking platforms and likes in cement mortar (1:4) including pointing in white cement (1:2) using marble dust admixture of pigment to match with shade of granite including necessary notching, chamfering the edges over 20mm screed bed complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platforms, and other similar situations complete all as specified and directed.

M&L for 50mm sand filling under floorings/ pavement spread and levelled in layers not exc 15cm thick complete including watering and consolidation complete all as specified and as directed.

M&L for machine pressed precast conctete interlocking paver block colour glossy finished rubber pressed any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade complete all as specified and as directed.

M&L for chequered cement concrete tiles colour glossy finished rubber pressed 30cm x 30cm x 25mm thick set jointed and pointed in neat cement slurry and pointed in coloured pigment over 20mm cement screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick (square or rectangular) polished, light shade area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick (square or rectangular) polished, light shade area of each tile not exceeding 0.36 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm cement screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick (square or rectangular) polished, light shade area of each tile exceeding 0.42 sqm but not exceeding 1.0 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm in cement mortar (1:3) complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick (square or rectangular) polished, light shade area of each tile not exceeding 0.42 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm cement screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and directed.

M&L for colored glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm/ 300x 450x 7mm thick set and jointed in neat cement slurry and pointed in white or colored cement to match including rendering 10mm thick in cement mortar (1:4) complete all as specified and directed.

M&L for 10mm thick rendering on fair faces of brick work or concrete surface in cement plaster (1:6) finished the surface fair complete all as specified and directed.

M&L for preparation of new surface of wall and applying two coats of oil bound distemper over a coat of 3mm thick wall care putty complete all as specified and directed.

Excavation in trenches not exc 1.5m in deepth and 1.5m in width and getting out in soft/loose soil complete all as specified and directed.

M&L for brick work with fly ash brick, old size straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

S&F mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed.

M&L for TMTbars 5mm dia and over upto and including 10mm dia as in stirrups cut to length, bent to shape required, including cranking, bending spirally etc. and binding with and including MS (annealed) wire not less than 0.9 mm dia complete all as specified and directed.

M&L for providing RCC 1:11/2:3 type A-1 (nominal mix) as in beams, cantilevers, bressummers, lintels over 1.5m span concrete etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished fair and even complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft and loose soil complete all as specified and directed.

Removing excavated material (soil) not exc 50m and deposited where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M&L for 25mm (avg) thick cement concrete (1:2:4) type B-0, (using 12.5mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement using water proofing liquid @ 200 ml/50 kg of cement complete all as specified and directed. (Note:- Water proofing liquid will be measured & paid separately)

Supply only liquid water proofing admixture of make-pidilite or equivalent complete all as specified and directed.

M&L for provision of water proofing treatment by using APP torch on mineral/ slate finished membrance over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane having non woven polyster film reinforcement with 3 mm thick and weight not less than 3 .00 kg/sqm and finished on top with mineral/slate finished torch on system laid with 100 mm & 150 mm over lap on side & end laps resepectely all as per manufacturers instructions over and including rendering 15mm thick in cement mortar (1:3) on concrete surfaces complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub bases/ pavings complete all as specified and directed.

M&L for hardcore of gauge not exc 63 mm broken stone or boulders deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for cement concrete (1:2:4) tybe B-1, (using 20mm graded stone aggregate) in floor finish/ pavings concrete, surface even and smooth without using extra cement complete all as specified and directed.

M&L for POP board false ceiling multi level 12/12.5mm thick fixed in galvanized grid work as required quanity as site with 25mm long self drilling and tapping screw acing phillips head with under end outer at 200mm centre to centre, including finishing to joint of face board with specially formulated jointing compound including GI suspenders of 6mm thick and joints of ceiling board shall be finsihed 48 mm wide fibre tape to provide eseam less finish etc, M&L for preparing POP false ceiling and applying two coat of luster paint over coat of primer as per recommended by manufacture etc, complete all as specified and directed.

M&L for POP corners mouldings 150mm grith with screw on walls etc, complete all as specified and directed.

M&L for 10 to 12mm thick froasted toughend tinted glass fixed to door or as partition or any other location including brackets, supports, handles, lock, bottom machine and other accessories as required complete all as specified and directed.

M&L for 8.3mm thick laminated wooden flooring high density core grade AC4 (As per classification EN 13329) advance high dencity click system fixed over rubber sheet cushioning as per manufacturer's instruction complete all as specified and directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminimised hinging device Mild steel tube flush pipe, 32mm dia, for high level cistern complete all as specified and directed.

S&F in repairs plastic water closet seat, black/ white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs vitreous china squatting pan "Orissa pattern", 580 X 440 mm long with integral foot rest, S or P trap including connection to trap and to flushing pipe etc complete including making good to floor complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified and directed.

S&F in repairs wash hand basin (flat back or angle back) of size 550 X 400mm, white including waste pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including supply & fixing of waste pipe complete all as specified and directed.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with pIngs including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F 32mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F 40mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs 32mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs 40mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F GI water tubing medium grade 15mm bore galvanized with all fittings & fixture complete to walls and ceilings or laid in floors including taking up or down steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F GI water tubing medium grade 20mm bore galvanized with all fittings & fixture complete to walls and ceilings or laid in floors including taking up or down steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F in repairs stainless steel kitchen plate rack of size 36x24x10 Inch complete with fixing arrangement complete all as specified and directed. Make:- Prayag / Hindustan / Nirali / Bluestar/ Shakti.

S&F in repairs 15 mm bore chromium plated Bib cock with flange, complete all as specified and directed. Make:- Prayag CAT No 8306.

S&F in repairs 15 mm bore chromium plated Bib cock Long body with flange, complete all as specified and directed. Make:- Prayag CAT No. 8308.

S&F in repairs wall mixer with L bend (Provision for overhead shower) for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. Make:- Prayag CAT No PIS- 75.

S&F in repairs health faucet with 1 mtr tube and hook complete all as specified and directed. Make:- Prayag CAT No.BEA-96.

S&F in repairs glass shelf 500x60x6mm (with ABS brackets) complete all as specified and directed. Make:- Prayag CAT No.BEA-47

S&F in repairs corner glass shelf 300mm (with ABS brackets) 300x600mm complete all as specified and directed. Make:- Prayag CAT No.BEA-46.

S&F in repairs Soap Dish complete all as specified and directed. Make:- Prayag CAT No.BEA-45.

S&F in repair Prayag wall cabinet Mirror (500x400Appx) complete all as specified and directed. Make:- Prayag CAT No. 556.

S&F single piece WC with UF soft close slim seat cover,fixing accessaries, accessaries set and cistern fittings, closet 'S' & 'P' trap white 670x370x720mm complete all as specidied and directed. Make:- Jaquar CAT No. LYS-WHT- 38851 S 300 UFSMN.

S&F in repairs bib cock 2-way double handle with flange complete all as specified and directed. Make:- Prayag CAT No. 8312.

S&F in repairs sink mixer with regular spout T/M (swinging spout) complete all as specified and directed. Make:- Prayag, CAT No.:8560.

S&F in repairs 32mm bore of pipe of low density polyethylene pipe (LDPE) of pressure rating 6kgf/Sqcm fixed complete all as specified and directed.

S&F in repairs 40mm bore of pipe of low density polyethylene pipe (LDPE) of pressure rating 6kgf/Sqcm fixed complete all as specified and directed.

S&F in repairs 15 mm bore chromium plated bib taps long body, cast copper alloy, Fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair brass CP fancy type 15mm bore pillar tap complete all as specified and directed.

S&F in repairs 15mm dia brass C.P fancy type stop valves complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size complete all as specified and directed.

S&F in repair 15 mm size Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity hoisted and fixed in position and including dismantling water tank and removing from site complete all as specified and directed.

S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity hoisted and fixed in position and including dismantling water tank and removing from site complete all as specified and directed.

S&F in repairs 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) complete all as specified and directed.

S&F in repairs brass CP tubular towel rail, 20mm dia, 60cm long between flanges complete all as specified and directed.

S&F in repairs cast iron floor trap 100 mm dia, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Dismantling of PVC pipes (110mm/75mm bore), jointed in cement mortar and taking out of trenches/from walls including fittings as bands, branch pieces, traps etc complete all as specified and directed.

S&F in repairs PVC (SWR) bends any radius of 75mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) bends any radius of 110 mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) junction single, (Single T) equal or unequal 75mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) junction single, (Single T) equal or unequal 100mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) vent cowl of 110mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) 'S/P' trap 110/110mm bore complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in floor/wall 75mm bore complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls / floor 110mm bore complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.41,290.00]

khushal constructions

DEESHA CONSTRUCTIONS

AK CONSTRUCTION

Meet Road Lines

Bidder Name

Meet Road Lines

S D WAGHAMSHI

DEESHA CONSTRUCTIONS

khushal constructions

AK CONSTRUCTION