Construction of Solid Waste Management and its Development Works in MLFAC at SIPCOT Industrial Park, Panapakkam Package 7A

Construction of Solid Waste Management

Clearing light Jungle on road side including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness..etc., complete complying with standard specification and as directed by SIPCOT Officers

Providing Pre – Constructional Anti – Termite Treatment and creating a Chemical Barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, footings, column pits, trenches, pits, tunnels, wall trenches, back fill, plinth filling, junction of wall and floor. Retaining / side walls, external perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining / side walls etc. as per instructions of chemical manufacturer and all as directed. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification etc., complete complying with standard specification and as directed by SIPCOT Officers

Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by SIPCOT Officers (0 to 2.00m depth)

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the SIPCOT officers in layers of not more than 15cm thick well rammed with surface vibrator, watered and consolidated etc., complete complying with standard specification and as directed by SIPCOT Officers

Providing Plain Cement Concrete 1:4:8 (One cement, four sand and eight Jelly) using 40mm size Hard broken granite stone jelly for foundation concrete etc. laid in layers not exceeding 15cm thick including dewatering wherever necessary well rammed, consolidated etc. complete complying including cost and conveyance of all materials and labour to work site, mixing, laying, compacting , curing with all leads of soft potable water etc., complete complying with standard specification and as directed by SIPCOT Officers (in all heights and all depths)

Supplying and filling in foundation, basement, etc with filling Stone dust/Quarry dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by SIPCOT Officers

Providing and laying in position, Standardised Concrete Mix M-25 Grade by insitu manual mix concrete adopting weighing batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglm3 and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by SIPCOT Officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards.

Foundation and basement

In Ground floor

In First floor

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with standard specification and as directed by SIPCOT Officers. (Payment for centering shall be given after the concrete is laid)

For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works etc all complete

For reinforced cement concrete works such as floor and roof slab, lintels, beams staircase waist and landing slab and plane surfaces and other similar works.

For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works.(Below Plinth)

For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works.(Above Plinth)

Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10 cm to 13 cm dia including cross bracing etc. complete complying with standard specification and as directed by SIPCOT Officers

From 3.30 to 4.30m

From 4.30 to 5.30m

From 5.30 to 6.30m

Brick work in Cement Mortar1:5 using best quality Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" with class designation of 7.5 conforming to IS 1077-1992 for Foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally other type of bond shall be done as directed by the Executive Engineer in charge etc., complete complying with standard specification and as directed by SIPCOT Officers. (For Foundation and Basement)

Brick work in Cement Mortar 1:6 (One part Cement and six part M sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and Floors including curing, etc., complete complying with standard specification and as directed by SIPCOT Officers

In Ground floor

In First floor

Brick partition walls of 11.50cm thickness using best quality II Class Ground Moulded Chamber Burnt Bricks of size - 9" x 41/2" x 3" with class designation of 7.5 conforming to IS 1077-1992 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by SIPCOT Officers. (Hoop iron reinforcement will be measured and paid for separately) (In Ground Floor)

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by SIPCOT Officers

Flooring with ceramic tiles of 305 x 305 x 6 mm conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by SIPCOT Officers (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with following best approved quality, white / colour glazed tiles conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by SIPCOT Officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing with printed design colour glazed tiles of size 300 x 450 x 8mm

Painting two coats of newly plastered wall (Interior ) surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT Officers

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat on cement plastered wall surface ect., complete complying with standard specification and as directed by SIPCOT Officers

Manufacturing, supplying and fixing in position of RCC Jally of 5cm thick in cement concrete 1:2:4 using 20mm machine crushed stone jelly (excluding cost of reinforcement steel) including cost of mould, finishing, curing, lifting, fixing in position etc., complete complying with standard specification and as directed by SIPCOT Officers

Ground Floor

First Floor

Supplying and fixing of Teak wood wrought and put up in position of frames inclusive of fixing holdfasts for doors, windows and ventilators etc., complete complying with standard specification and as directed by SIPCOT Officers

0 to 2m length

2 to 3m length

Supplying and fixing of Solid Core Flush Shutters with teakply on both side with teakwook lipping alround 35mm thick with both side 1mm thick Laminated sheet and Door Handle 200mm long – 2 nos, 5" Butt Hinges – 3 nos, 250mm long and 12mm dia Tower Bolt – 2nos, Mortice Lock With Night latch (Godrej or Equivalent) with required screws with 3 Keys – 1 no, Rubber Bush - 40mm dia – 1no and door stoper 1no vision panel as per drawing etc., cost including all material, labour charges and all hardwar materials etc., complete complying with standard specification and as directed by SIPCOT Officers - (Single Leaf)

Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter(with Frame), etc., complete complying with standard specification and as directed by SIPCOT Officers

Painting new wood work with Three finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by SIPCOT Officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by SIPCOT Officers. (Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire)

Providing 40mm tk granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two Crushed Stone Sand and Four aggregate) using 6 to12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trowel, thread lining, curing etc. complete complying with standard specification and as directed by SIPCOT Officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the SIPCOT officers)

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc. complete complying with standard specification and as directed by SIPCOT Officers. ROLLING SHUTTERS (WITH ISI MONOGRAM) Gear Operated Type (from 8 sqm. to 12 sqm. Area)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc.complete complying with standard specification and as directed by SIPCOT Officers

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all Floors excluding cost of priming coat etc, complete complying with standard specification and as directed by SIPCOT Officers. (The make, quality and colour of paint should be got approved by the SIPCOT officials before use on works.)

Supplying, Fabrication & Fixing of Eaves Gutter made out of 0.50 mm TCT Coated Galvalume sheets with necessary Strips, including cost of necessary fixing accessories, labour charges, scaffolding etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of Pre-fabricated Structural Steel, coated galvalume ROOFING/ WALL SHEET of 0.5mm thickness with SMP coating with colour bond XRW coating, having minimum of 550 Mpa yield strength, Coating 150 GSM as per ASTM 792 or equivalent standard. The structural roofing Panel shall have 1020 mm effective width, nominal 30 mm crest height at nominal 250 mm centre to centre pitch with the embossment (share grove) on top & side of ribs for better composite action including Flashing for joints, and all incidental charges etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supplying and fixing of 110 mm dia PVC pipe for rain water down fall pipe conforming to IS13592 with ISI mark and fittings conforming to IS 14735, with necessary C I gratings, shoes, bends, offsets, clamps, teak wood plugs, etc., of approved quality including fixing C.I. gratings at the junction of parapet and floor or roof slab, finishing etc.complete complying with standard specification and as directed by SIPCOT Officers

Supply and fixing of 1250 Kg/Day Organic Waste Composter fully automatic, microorganism-based aerobic composting system designed for rapid processing of segregated organic waste within 24–48 hours, utilizing mesophilic and thermophilic microorganisms for efficient aerobic fermentation and up to 80% volume reduction. The system is housed within a powder-coated mild steel (MS) outer canopy with lifting hook facility and measures approximately 16.0 ft (L) × 8.0 ft (W) × 9.5 ft (H). The composting tank, blades, shaft, and doors are made from high-grade stainless steel (SS) to ensure corrosion resistance and long service life. The machine operates on a 415–440 V, 3-phase power supply, driven by a 5.5 kW motor (make: Rossi/Nord/Siemens/Precision) and has an overall connected load of approximately 40 kW, consuming 200–230 units/day. Key safety features include an emergency stop switch, overload indication, limit switch, overload relay, and a safety interlock that automatically stops internal mixing blades when the input door is opened. The control panel incorporates MCB/MCCB (80–100A, 4-pole) protection, with a CU 16 sq.mm, 4-core main supply cable.The rate Inclusive of all the other incidental charges of conveyance, fixing in position etc., complete complying with standard specification and as directed by SIPCOT Officers

Construction of Electrical Room

Clearing light Jungle on road side including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness..etc., complete complying with standard specification and as directed by SIPCOT Officers

Providing Pre – Constructional Anti – Termite Treatment and creating a Chemical Barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, footings, column pits, trenches, pits, tunnels, wall trenches, back fill, plinth filling, junction of wall and floor. Retaining / side walls, external perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining / side walls etc. as per instructions of chemical manufacturer and all as directed. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification etc., complete complying with standard specification and as directed by SIPCOT Officers

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, Stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 meter and lifts as specified hereunder etc. complete complying with standard specification and as directed by SIPCOT Officers. (including refilling) (0 to 2.00 m depth)

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15cm thick well rammed with surface vibrator, watered and consolidated etc.,complete complying with standard specification and as directed by SIPCOT Officers

Supplying and filling in foundation, basement, etc with filling Stone dust/Quarry dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by SIPCOT Officers

Plain Cement Concrete 1:4:8 (one cement, two crushed stone sand and four hard broken stone jelly) using 40mm jelly for wearing coat including laying, compacting, finishing and curing, etc., ccomplete complying with standard specification and as directed by SIPCOT Officers

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m') 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by SIPCOT Officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards and cement is OPC as per design and as directed by the SIPCOT Officers

Foundation and basement

Ground floor

First Floor

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with standard specification and as directed by SIPCOT Officers. (Payment for centering shall be given after the concrete is laid)

For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works etc all complete

For plane surface such as vertical slab,side slab,drops facia and vertical wall etc.

For reinforced cement concrete works such as floor and roof slab, lintels, beams staircase waist and landing slab and plane surfaces and other similar works.

For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works. Below Plinth

For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works. Above Plinth

Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10 cm to 13 cm dia including cross bracing etc. complete complying with standard specification and as directed by SIPCOT Officers.

Brick work in Cement Mortar1:5 using best quality Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" with class designation of 7.5 conforming to IS 1077-1992 for Foundation and basement including Cost of Mortar Plasticizer curing, etc., complete complying with standard specification and as directed by the SIPCOT officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the SIPCOT Officers. (For Foundation and Basement)

Brick work in Cement Mortar1:6 using best quality Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" with class designation of 7.5 conforming to IS 1077-1992 for Foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the SIPCOT officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge.

Superstructure in Ground floor

First Floor

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by SIPCOT Officers

Providing 40mm tk granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two Crushed Stone Sand and Four aggregate) using 6 to12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trowel, thread lining, curing etc. complete complying with standard specification and as directed by SIPCOT Officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the SIPCOT officers)

Manufacturing, supplying and fixing in position plain Cement concrete precast slab of 100 mm thick in Cement Concrete M25 grade including cost of moulding charges, casting of slab, finishing, curing, placing etc. complete complying with standard specification and as directed by SIPCOT Officers

Painting two coats of newly plastered wall (Interior ) surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT Officers

Painting two coats of newly plastered External wall surface with ready mixed Weather proof Exterior plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT Officers

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. I R.T.S. rods of all sizes of reinforcement for all Reinforced cement: concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length wherever necessary cover blocks and all other incidental charges etc. complete complying with standard specification and as directed by SIPCOT Officers. (The steel rods must be Fe 500 grade of any brand with ISI marking and necessary test certificate to be produced before using it at site)

Supplying and fixing mild steel grills for windows, ventilators veranda enclosure, ladder and gate as per the design approved including one coat of primer and labour for fixing in position etc, complete complying with standard specification and as directed by SIPCOT Officers. (The design of grill should be got approved from the SIPCOT officials before use)

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with Three coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by SIPCOT Officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. complete complying with standard specification and as directed by SIPCOT Officers

Supply and fixing of Pre-fabricated Structural Steel, coated galvalume ROOFING/ WALL SHEET of 0.5mm thickness with SMP coating with colour bond XRW coating, having minimum of 550 Mpa yield strength, Coating 150 GSM as per ASTM 792 or equivalent standard. The structural roofing Panel shall have 1020 mm effective width, nominal 30 mm crest height at nominal 250 mm centre to centre pitch with the embossment (share grove) on top & side of ribs for better composite action including Flashing for joints, and all incidental charges etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supplying, Fabrication & Fixing of Eaves Gutter made out of 0.50 mm TCT Coated Galvalume sheets with necessary Strips, including cost of necessary fixing accessories, labour charges, scaffolding etc., complete complying with standard specification and as directed by SIPCOT Officers

Manufacturing and supplying of Steel Windows / Ventilator confirming to IS 1038/1983 specification with steel section used for fabrication of windows as per IS7452/1982 specification and as per the approved type design for all size applicable for the work with iron oxidised handles with 4mm thick pin headed glass, locking arrangements, peg stays and including cost for one coat of red oxide primer etc., complete complying with standard specification and as directed by SIPCOT Officers. The standard models of window with grill design should be got approved by the Engineer in Charge

Providing and fixing in position SFRC manhole covers with frames of size 600mmx600mm etc. complete complying with standard specification and as directed by SIPCOT Officers

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc., complete complying with standard specification and as directed by SIPCOT Officers. ROLLING SHUTTERS (WITH ISI MONOGRAM) Gear Operated Type (from 8 sqm. to 12 sqm. Area)

Supplying and fixing in position 110mm PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessary PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of “U” clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification and as directed by SIPCOT Officers

Providing Paver Block

Earth work excavation for open foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the SIPCOT officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by SIPCOT Officers

Conveyed earth other than sand with an initial head lead of 2Km. and depositing the earth as shown by the SIPCOT officers in layers of not more than 15cm thick well rammed and consolidated etc., complete complying with standard specification and as directed by SIPCOT Officers

Construction of Granular Sub - Base (GSB) to the required compacted thickness (Drainage layer) by providing approved Coarse graded material conforming to Grading-V of Table 400 - 1 and satisfying the physical requirement for material for GSB as per Table 400 - 2 of MORTH Rev -5 including screening, spreading in uniform layers with motor grader on prepared surface, watering and premixing by mix in place method with rotavator at OMC, and compacting with Vibratory roller 80 to 100 KN static weight to achieve the desired density and fine dressing to required grade and cross slope as directed by the Engineer incharge etc., complete including obtaining and transporting all materials from approved quarry site to work site with all lift and lead by mechanical transport, head load or any other mode of transporation including cost and conveyance of all materials, labour charges,hire charges and fuel charges for loader, water tanker with sprinkler,motor grader, vibratory road rollers and all other equipments, tools and plants, safety measures, testing required including all other incidental charges, as per clause 401 of MORTH Rev.-5, etc., complete complying with standard specification and as directed by SIPCOT Officers. (the soaked CBR not less than 30%)

Providing, laying, spreading and compacting graded stone aggregates for Wet Mix Macadam 250mm thick, including premixing the materials with water at OMC in mechnanical mix plant, conveyance of mixed materials by tipper to site, laying in uniform layers using pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges as per clause 406 of MORTH Rev-5, etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supplying and filling in foundation, basement, etc with filling Stone dust/Quarry dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supplying and laying of Interlocking Paver Block Stone 63mm thick Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc. complete complying with standard specification and as directed by SIPCOT Officers.

Construction of Storm Water Drain

Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by SIPCOT Officers.

Cement Concrete 1:4:8 (One Cement, four crushed stone sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by SIPCOT Officers.

Providing and laying in position, Standardised Concrete Mix M-25 Grade using In-situ Concrete batching plant/ Ready Mix Concrete (RMC) adopting weigh batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglm3 and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including Conveyance of concrete from batching plant to Work site, Electricity charges and other works & labour cost involved for concrete production, laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). (In Foundation and Basement)

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals in all floors, etc., complete complying with standard specification and as directed by SIPCOT Officers. (Payment for centering shall be given after the concrete is laid).

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc. using mild steel sheets of size 1200cm x 60cm and 10 BG stiffened with welded mild steel angles of size 40mm x 40mm x 5 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner, Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals. MS Channel Section (ISMC 100) shall be provided as a vertical upport @1.20m C/C and with Lateral support of Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) & steel pipes of 20mm dia @ required level/spacing etc. complete complying with standard specification and as directed by SIPCOT Officers. (Payment for centering shall be given after the concrete is laid)

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by SIPCOT Officers. (Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) (Upto Plinth / Basement Level)

Manufacturing, supplying and fixing in position plain cement concrete precast Saucer Drain of size 600mm x 300mm x 100mm in Cement Concrete 1:2:4 (One cement, Two crushed stone sand and Four jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement and Three Crushed Stone Sand) to full depth of slab etc., complete complying with standard specification and as directed by SIPCOT Officers.

Manufacturing, supplying and fixing in position plain cement concrete precast Saucer Drain of size 600mm x 300mm x 100mm in Cement Concrete 1:2:4 (One cement, Two crushed stone sand and Four jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement and Three Crushed Stone Sand) to full depth of slab etc., complete complying with standard specification and as directed by SIPCOT Officers.

Site Grading

Earth work open excavation by manual means in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the SIPCOT officers and clearing and levelling the site, etc., complete complying with standard specification and as direct-ed by the SIPCOT officers. (Upto 2.00m Depth)

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the SIPCOT officers in layers of not more than 15cm thick well rammed with surface vibrator, watered and consolidated etc., complete complying with standard specification and as directed by SIPCOT Officers.

Transportation of excavated earth with a average lead of 2 km including loading in layers of not more than 15cm thick well rammed with surface vibrator, watered and consolidated etc., complete complying with standard specification and as directed by SIPCOT Officers.

Potable Water Supply Network

Supplying and laying of HDPE pipes, confirming to IS 4984:2016 UV stabilized & anti-microbial fusion welded, having thermal stability including all fittings, trenching and refilling & testing of joints etc, complete complying with standard specification and as directed by SIPCOT Officers. (63 mm OD, PE 100 PN6)

Supply and delivery of DI D/F Gate sluice valves (soft seated) resilient seated soft sealing Gate Valves(Sluice Valves) with body Bonnet of Ductile cast iron of Grade GGG 40 or equivalent grade, Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 O Ring protection on the shaft and seals of NBR and the valves should be of Vacuum tight and 100% leak proof with face to face dimensions as per BS 5163-89/ISI 4846-2000/DIN 3202 F4. All the valves should be with electrostatic powder coating both inside and out side with pocket less straight through body passage. All the valves are to be compatible for buried application with pressure rating PN 10/16 with 5 years warranty including all accessories etc., complete complying with standard specification and as directed by SIPCOT Officers. (80mm dia Gate Valve)

Supply and delivery of DI D/F Gate sluice valves (soft seated) resilient seated soft sealing Gate Valves(Sluice Valves) with body Bonnet of Ductile cast iron of Grade GGG 40 or equivalent grade, Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 O Ring protection on the shaft and seals of NBR and the valves should be of Vacuum tight and 100% leak proof with face to face dimensions as per BS 5163-89/ISI 4846-2000/DIN 3202 F4. All the valves should be with electrostatic powder coating both inside and out side with pocket less straight through body passage. All the valves are to be compatible for buried application with pressure rating PN 10/16 including all accessories etc., complete complying with standard specification and as directed by SIPCOT Officers. (80 mm gate valve for scouring purpose - up to 150 mm dia HDPE pipe)

Supplying and laying non pressure NP-3 class R.C.C. pipes using Ordinary Portland cement confirming to IS 458-2003 including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete complying with standard specification and as directed by SIPCOT Officers. (using Ordinary Portland cement) (200mm dia R.C.C. pipe)

AMR Water Meter Supply and delivery of Brass Multi Jet Model with removal mechanism confirming to IS 4064 Part I, II , III Class B or IS 779 & IS 2373 standards with type test certificate for Routine Test, IP 68 Test certificate issued by FCRI / NABL Accredited lab. The water meter shall have magnetic or mechanical drivers or shall be versatile for installation in any position. The meters shall be hydrodynamically or hydrostatically balanced. The runner, runner chamber, pointers of the meter shall be as per ISO 4064 class B specification. Dry dial excavated counter housing fully protected againts flooding ensuring easy reading in all climatic conditions. The meter shall be inferential, Dry-Dial type, Class B with straight reading cyclometer with inbuilt filter basket, Brass body, Inbuild NRV & Strainer for the sizes upto 40mm Brass / Bronze Nut and tailpieces, protective top lid, secured by a robust hinge with sealing facilities for couplings and sizes 50mm & above shall be woltman type complies to ISO 4064 - Class B standard with flow meter body shall be of DI / CI. The process connections shall be of flanged ends with pressure rating upto 16 Bar. The water meter shall be equipped with Dual pulse output with integrated battery - operated data logger with minimum battery life upto 7 years or better. The data logger shall be SIM based / RF based with required SIM cards will be in the scope of flow meter manufacturer. Data logging will be continuous and data transfer to cloud shall be minimum of 1 per day. The flow meter with integral data logger shall comply to IP 68 installations and with 5 years warranty etc., complete complying with standard specification and as directed by SIPCOT Officers. (80 mm Dia )

Construction of rectangle valve chamber with R.C.C in M25 grade concrete, with necessary excavation, foundation levelling concrete in 1:3:6 (1 cement: 3 fine sand : 6 graded stone aggregate 40 mm nominal size), inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement including reinforcement steel and shuttering etc., complete complying with standard specification and as directed by SIPCOT Officers.

For Butterfly Valve Gate valve chamber - For up to 100 mm dia pipe - (1.2m x 0.85m x 1.75m)

For Scour Valve Scour valve chamber - 80mm Scour valve for up to 150 mm dia pipe line - (0.80m x 1.2m x 1.85m)

Non - Potable Water Supply Network

Supplying and laying of HDPE pipes, confirming to IS 4984:2016 UV stabilized & anti-microbial fusion welded, having thermal stability including all fittings, trenching and refilling & testing of joints etc., complete complying with standard specification and as directed by SIPCOT Officers. (50 mm OD, PE 100 PN16)

Supply and delivery of DI D/F Gate sluice valves (soft seated) resilient seated soft sealing Gate Valves(Sluice Valves) with body Bonnet of Ductile cast iron of Grade GGG 40 or equivalent grade, Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 O Ring protection on the shaft and seals of NBR and the valves should be of Vacuum tight and 100% leak proof with face to face dimensions as per BS 5163-89/ISI 4846-2000/DIN 3202 F4. All the valves should be with electrostatic powder coating both inside and out side with pocket less straight through body passage. All the valves are to be compatible for buried application with pressure rating PN 10/16 with 5 years warranty including all accessories etc., complete complying with standard specification and as directed by SIPCOT Officers. (50 mm dia. Gate valve)

Supplying and laying non pressure NP-3 class R.C.C. pipes using Ordinary Portland cement confirming to IS 458-2003 including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete complying with standard specification and as directed by SIPCOT Officers. (using Ordinary Portland cement) (200mm dia R.C.C. pipe)

AMR Water Meter Supply and delivery of Brass Multi Jet Model with removal mechanism confirming to IS 4064 Part I, II , III Class B or IS 779 & IS 2373 standards with type test certificate for Routine Test, IP 68 Test certificate issued by FCRI / NABL Accredited lab. The water meter shall have magnetic or mechanical drivers or shall be versatile for installation in any position. The meters shall be hydrodynamically or hydrostatically balanced. The runner, runner chamber, pointers of the meter shall be as per ISO 4064 class B specification. Dry dial excavated counter housing fully protected againts flooding ensuring easy reading in all climatic conditions. The meter shall be inferential, Dry-Dial type, Class B with straight reading cyclometer with inbuilt filter basket, Brass body, Inbuild NRV & Strainer for the sizes upto 40mm Brass / Bronze Nut and tailpieces, protective top lid, secured by a robust hinge with sealing facilities for couplings and sizes 50mm & above shall be woltman type complies to ISO 4064 - Class B standard with flow meter body shall be of DI / CI. The process connections shall be of flanged ends with pressure rating upto 16 Bar. The water meter shall be equipped with Dual pulse output with integrated battery - operated data logger with minimum battery life upto 7 years or better. The data logger shall be SIM based / RF based with required SIM cards will be in the scope of flow meter manufacturer. Data logging will be continuous and data transfer to cloud shall be minimum of 1 per day. The flow meter with integral data logger shall comply to IP 68 installations and with 5 years warranty etc., complete complying with standard specification and as directed by SIPCOT Officers. (50 mm dia)

Construction of rectangle valve chamber with R.C.C in M25 grade concrete, with necessary excavation, foundation levelling concrete in 1:3:6 (1 cement: 3 fine sand : 6 graded stone aggregate 40 mm nominal size), inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement including reinforcement steel and shuttering etc., complete complying with standard specification and as directed by SIPCOT Officers. Gate valve chamber - For up to 100 mm dia pipe - (1.2m x 0.85m x 1.75m)

Laterals 16mm Dia Pipe

Emitters

Fire Fighting Fire Extinguisher

Fire Buckets

Yard Hydrant

Internal Electrification - Electrical Room

Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB as incoming and 3 nos. 32A 3P MCB , 15 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply , installation, commissioning and testing of 3 KVA, 1 PHASE UPS (Single Phase In & Single Phase Out) CAPACITY - SYSTEM WITH BATTERY - 1 HOUR BACKUP with electrical connection, earthing, the cost shuold include for the MS angle support, etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and providing cable end termination of 3C× 6 sq.mm copper cable with gland and sockets by crimping, including all necessary electrical connections, etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and run of 2 of 6 sq.mm PVC insulated, single-core, unsheathed, FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling, with continuous earth wire connection of 6 sq.mm copper wire, and making good of the concealed portion with suitable color, etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection etc. complete complying with standard specification and as directed by SIPCOT Officers.

LT Cable and End Termination Supply and laying of the following size of PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre, with a 0.15 metre layer of sand placed below and around the cable, covering three sides with bricks, and refilling the earth to make good the surface, etc.,complete complying with standard specification and as directed by SIPCOT Officers.

3.5core x 25 sq.mm. Ar. Alu. UG cable

3 core x 6 sq.mm. Ar. Alu. UG cable

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc.complete complying with standard specification and as directed by SIPCOT Officers.

3.5core x 25 sq.mm. Ar. Alu. UG cable

3 core x 6 sq.mm. Ar. Alu. UG cable

Supply and providing cable end termination of following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc. complete complying with standard specification and as directed by SIPCOT Officers.

3.5core x 25 sq.mm. Ar. Alu. UG cable

3 core x 6 sq.mm. Ar. Alu. UG cable

Light Point Wiring Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with painting of Suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for Open MS conduit Light point / fan point etc.complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections etc. complete complying with standard specification and as directed by SIPCOT Officers.

Circuit Main for Light wiring Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable as required rigid pipe concealed in/on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion etc.complete complying with standard specification and as directed by SIPCOT Officers.

Supply and run of 2 of 4 sq.mm PVC insulated, single-core, unsheathed, FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling, with continuous earth wire connection of 4 sq.mm copper wire, and making good of the concealed portion with suitable color, etc., complete complying with standard specification and as directed by SIPCOT Officers.

Light Fixtures and Fan Supply, installation, testing, and commissioning of industrial-type 40W, 4ft LED box-type light fitting with cool daylight, made of CRCA powder-coated body, aluminum reflectors, polycarbonate diffuser, glare-free light, suitable for surface mounting, including electronic drivers, daylight color LED lamps, interconnecting wiring, and accessories, all inclusive with suspension pipe if required, etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of 1200mm (48") sweep AC ceiling fan 5 star rated complete with 2 module 100W fan step regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of 450mm (18") sweep AC exhaust fan, complete with necessary wall opening and making good the wall. Supply and fixing of louver shutter arrangement etc., complete complying with standard specification and as directed by SIPCOT Officers.

supply and fixing of 60W LED street light fitting with LED (Lower end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting with earth connection etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply, installation, testing & Commissioning of Earthing as per PWD standard with an electrode of 2.10 metre class 'B' GI pipe of die not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply and laying of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height Ladder type cable tray etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and run of 25X6 mm GI earth flat with necessary clamps / supports on wall / floor / ground for earth connection etc.complete complying with standard specification and as directed by SIPCOT Officers.

Supply and Run of 1 of No.8 SWG copper wire for earth connection etc., complete complying with standard specification and as directed by SIPCOT Officers.

Safety Accessories Supply of Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply of First Aid Box complete with all First Aid Medicinesetc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply of 2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS etc.complete complying with standard specification and as directed by SIPCOT Officers.

Supply of Shock Treatment Chart fixed in glass frame etc. complete complying with standard specification and as directed by SIPCOT Officers.

Internal Electrification - SWM

Sub panel:Design, manufacture, supply, erection, testing and commissioning of main Power panel suitable for 415Volts 3Phase 4wire system, indoor/outdoor installation, made up of CRCA sheet steel of thickness not less than 2 mm with a weather proof canopy of top, double door construction, IP 55 protection, anti corrosive chemical resistant paint dust & vermin proof, cubicle type, floor mounted, undrilled gland plates at top / bottom, complete with internal wiring, ferrules, name plates, Locking System with heat shrinkable colour coded sleeve with SMC Bus bar supports with aluminium Busbar 125A, TPN 50 Hz, bus bars . The Panel should be fully comply to IEC 61439 part 1 & 2 of type tested assembly with incomer 1Nos - 125A, 4P, 25kA, 50Hz, Microprocessor based releases MCCB with FRP sheet barrier on the incoming and outgoing cable sides of the circuit breaker metering for each Incomer and out goings with associated protections MCB's, R,Y,B Phase Indicating lamps and control circuit as required etc.Out going:2Nos- 100A,4P MCCB 2Nos-40A , 4P, MCB4no-32A , 2P, MCBwith digital multifunctional meter with RS485 port and suitable CT etc. including concrete pedestal and associated civil works etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in wall with earth connection etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply , installation, commissioning and testing of 3 KVA, 1 PHASE UPS (Single Phase In & Single Phase Out) CAPACITY - SYSTEM WITH BATTERY - 1 HOUR BACKUP with electrical connection, earthing, the cost shuold include for the MS angle support, etc complete etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only etccomplete complying with standard specification and as directed by SIPCOT Officers.

Supply and providing cable end termination with gland of 3 core x 10 sq.mm. copper cable with copper sockets by crimping etc with electrical connection complete etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply and Run of 2 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS/PVS conduit pipe as required concealed in wall and ceiling with continuous earth wire connection of 10 sq mm copper wire with painting of suitable colour. etc., complete complying with standard specification and as directed by SIPCOT Officers.

LT Cable End Termination Supply and laying of the following size of PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre, with a 0.15 metre layer of sand placed below and around the cable, covering three sides with bricks, and refilling the earth to make good the surface, etc., complete complying with standard specification and as directed by SIPCOT Officers.

3.5 core x 70 sq.mm. Ar. Alu. UG cable

From Sub panel to M/C load control panel ( 3.5core x 25 sq.mm. Ar. Cu.cable)

From control panel to heater (4core x 16 sq.mm. Cu.UG cable)

From control panel to heater (4core x 4 sq.mm. Cu.UG cable)

From control panel to heater (4core x 6 sq.mm. Cu.UG cable)

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc.complete complying with standard specification and as directed by SIPCOT Officers.

3.5 core x 70 sq.mm. Ar. Alu. UG cable

From Sub panel to M/C load control panel ( 3.5core x 25 sq.mm. Ar. Cu.cable)

From control panel to heater (4core x 16 sq.mm. Cu.UG cable)

From control panel to heater (4core x 4 sq.mm. Cu.UG cable)

From control panel to heater (4core x 6 sq.mm. Cu.UG cable)

Supply and providing cable end termination of following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc. complete complying with standard specification and as directed by SIPCOT Officers.

3.5 core x 70 sq.mm. Ar. Alu. UG cable

From Sub panel to M/C load control panel ( 3.5core x 25 sq.mm. Ar. Cu.cable)

From control panel to heater (4core x 16 sq.mm. Cu.UG cable)

From control panel to heater (4core x 4 sq.mm. Cu.UG cable)

From control panel to heater (4core x 6 sq.mm. Cu.UG cable)

Light Point Wiring Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge PVC/MS conduit pipe as required and ceiling with MS accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with painting of Suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for Open MS conduit Light point / fan point etc. complete complying with standard specification and as directed by SIPCOT Officers.

Power Looping Wiring Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion etc. complete complying with standard specification and as directed by SIPCOT Officers.

Power Socket with GI Box Supply and fixing of 1 no.6A two module socket , 1 no. 6A one module switch with module cover plate on suitable module concealed Box (GI ) in flush with wall with connections etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections etc. complete complying with standard specification and as directed by SIPCOT Officers.

Circuit Main for Light Wiring Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Continuous earth wire connection of 2.5 sq.mm copper wire with painting of Suitable colour etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply and run of 2 of 4 sq.mm PVC insulated, single-core, unsheathed, FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling, with continuous earth wire connection of 4 sq.mm copper wire, and making good of the concealed portion with suitable color, etc., complete complying with standard specification and as directed by SIPCOT Officers.

Light Fixtures and Fan Supply, installation, testing, and commissioning of industrial-type 40W, 4ft LED box-type light fitting with cool daylight, made of CRCA powder-coated body, aluminum reflectors, polycarbonate diffuser, glare-free light, suitable for surface mounting, including electronic drivers, daylight color LED lamps, interconnecting wiring, and accessories, all inclusive with suspension pipe if required, etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply, installation, testing, and commissioning of industrial-type 20W, 4ft LED box-type light fitting with cool daylight, made of CRCA powder-coated body, aluminum reflectors, polycarbonate diffuser, glare-free light, suitable for surface mounting, including electronic drivers, daylight color LED lamps, interconnecting wiring, and accessories, all inclusive with suspension pipe if required, etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply, installation, testing, and commissioning of industrial-type 60W, midbay LED light fitting with cool daylight, made of CRCA powder-coated body, aluminum reflectors, polycarbonate diffuser, glare-free light, suitable for surface mounting, including electronic drivers, inbuilt surge protection daylight color LED lamps, interconnecting wiring, and accessories, all inclusive with PVC box for conecting the wires with suspension pipe if required, etc., complete complying with standard specification and as directed by SIPCOT Officers.

supply and fixing of 24inch Sweep industrial type heavy duty wall mounting fan with fan clamp with side plates etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of 450mm (18") sweep AC exhaust fan, complete with necessary wall opening and making good the wall. Supply and fixing of louver shutter arrangement etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of 300mm sweep AC exhaust fan, complete with necessary wall opening and making good the wall. Supply and fixing of louver shutter arrangement etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and laying of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height Ladder type cable tray etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply, installation, testing & Commissioning of Earthing as per PWD standard with an electrode of 2.10 metre class 'B' GI pipe of die not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc. complete and as directed by officials.

Supply and run of 25mm x 6mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply and Run of 1 of No.8 SWG copper wire for earth connection etc., complete complying with standard specification and as directed by SIPCOT Officers.

Safety Accessories Supply of 2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply of Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply of First Aid Box complete with all First Aid Medicinesetc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply of Shock Treatment Chart fixed in glass frame etc., complete complying with standard specification and as directed by SIPCOT Officers.

Internal Plumbing & Water Supply - SWM

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., ccomplete complying with standard specification and as directed by SIPCOT Officers. (The wash hand basin and specials should be got approved by the SIPCOT officials before use on works).

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings.. such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supplying and fixing in position 150 X 100mm square mouth 'P' or 'S' trap stoneware Gully trap A grade with castiron gratings of size 150 X 150mm with C.I. air tight cover with frames of size 230 X 230mm at bottom and top respectively laid over a bed of brick jelly cement concrete 1:3:6 150mm thick using 40mm size broken brick jelly including neccessary brick work and plastering and including dismandling masonry wherever necessary and redoing the damaged portions to the original condition and by using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to the stonewere sewer line etc., complete complying with standard specification and as directed by SIPCOT Officers. (the stonewere gully trap should be got approved by the SIPCOT officials before use on works)

Supplying and fixing in position best quality CPVC (Chlorinated Poly Vinyl Chloride) Pipe (Higher pressure rating with higher pipe thickness) Standard Dimension Ratio–11. pressure BIS mark and providing leak proof joints using CPVC adhesives including fixing to the wall with special CPVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including the cost of suitable CPVC specials /GM specials like Elbow, Tee reducers, Plug, union, bend, coupler, nipple/ GM gate valve, check and wheel valve etc., testing for any leakages, etc., complete complying with standard specification and as directed by SIPCOT Officers. (The CPVC pipes should be got approved by the SIPCOT officials before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

a) 20mm dia Concealed line

b) 25mm dia Concealed line

c) 25mm dia Below GL

Supplying and fixing the following diaPVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type 'B' for soil line with relevant specials confirming to IS 14735 including jointing with seal ring confirming to IS 5382 with leaving a gap about 10mm to allow thermal expansion, fixing the pipes into walls with necessary wooden plug, screws, holding wherever necessary and making good of the dismantled portion with necessary connections to sanitary fittings etc., complete complying with standard specification and as directed by SIPCOT Officers.

a) 110mm dia

b) 75mm dia

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification and as directed by SIPCOT Officers. (The Nahani Trap should be got approved by the SIPCOT officials before use on works)

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification and as directed by SIPCOT Officers. (The mirror should be got approved by the SIPCOT officials before use on woks)

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specification and as directed by SIPCOT Officers. (The tower rail should be got approved by SIPCOT officials before use on works).

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specification and as directed by SIPCOT Officers. (The soap tray should be got approved by SIPCOT officials before use on works).

Supplying and fixing in position CP Two Way Bib Cock with Health Faucet of approved make conforming to BIS specifications and quality including cost of shellac, thread, including cutting and threading wherever necessary etc., complete complying with standard specification and as directed by SIPCOT Officers. (Taps should be got approved by the SIPCOT officials before use on the works)

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., ccomplete complying with standard specification and as directed by SIPCOT Officers. (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the SIPCOT officials before use on work. - 25mm

Construction of Inspection Chamber of inner clear size of 0.60 X 0.60 meters and average depth of 0.75 m with a base concrete of 100 mm thick cement concrete 1:4:8 (One cement, five sand and 8 aggregate) the chamber should be constructed in brick masonry 230 mm thick in cement mortar 1 : 5 using country brick of size 8 ¾ X 4 ¼ X 2 ¼ . The inner side of chamber plaster with cement mortar 1 : 3 -12 mm thick. The chamber top covered with R.C.C. precast slab 1 : 2 : 4 (one cement two sand and four aggregate) 7.5cm thick. The rate is including cost of materials labour etc completed including plastering with C.M. 1:3 -12 mm thick on inner side and top covered with RCC pre cast slab of 7.5 cm thick etc ., complete complying with standard specification and as directed by SIPCOT Officers.

External Street Lighting

Design, manufacture, supply, erection, testing and commissioning of 415 V streetlight service feeder pillar panel 900mm x 900mm x 300mm suitable for outdoor installation, made up of CRCA sheet steel of thickness not less than 2 mm with a weather proof canopy of top, double door construction, IP 55 protection, with 2 coat of primer and 2 coats of aluminium finish with 1no. 63A A TPN MCCB with 25 kA breaking capacity in the incoming and 4nos 32 A, TPN contactor 4nos. 32A TPN MCB, 6nos, 10A SP MCB as outgoing, automatic dawn and dusk with cyclic timer control for street light outgoing and adequate plate to terminate suitable cable as incomer and suitable cable as outgoing. energy saver for automatic switching ON/OFF as per pre-sets time cycle, digital multifunctional meter with RS485 port and suitable CT etc. including the pillar to be erected with suitable angle iron frame pedestal with concrete grouting etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supplying and erection of 8m Free Standing Single Arm Bracket 8 sided Octagonally continuously tapered structured pole galvanized iron coated (GI) with minimum coating of not less than 65-75 micron, with 130mm bottom A/F & 70mm at top A/F made up of 3mm thick HT sheet along with base plate of size 300 x 300 x 12mm thick including 4 Nos of M24X750mm high "J" type EN8 grade foundation bolts along with template and 1.5mtr long hot dip galvanized Single / double arm bracket made up of 40NB dia GI pipe suitable to mount on pole having top of 70mm A/F and including Bakelite sheet with 1 No 6A SP MCB and stud type connector suitable for 4CX16Sqmm cable etc., complete complying with standard specification and as directed by SIPCOT Officers.

Design, manufacture, testing and inspection at places of manufacturer, and supplying, delivery at site, unloading, storing, transporting directly to site or through transit stores as the case may be, installation, final painting, testing and commissioning of street lighting fixtures suitable for 80W LED street light fitting with cool day light, made out of pressure die cast aluminium body, separate compartment for LED, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams as required including accessories all inclusive etc., complete complying with standard specifications and as directed by officers.

Supply and laying of the following size of PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the three sides of the cable and refilling the earth to make good etc., complete complying with standard specification and as directed by SIPCOT Officers.

3.5core x 35 sq.mm. Ar. Alu. UG cable ( I/C to Feeder pillar box )

4core x 10 sq.mm. Ar. Alu. UG cable ( to lighting poles and looping)

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc., complete complying with standard specification and as directed by SIPCOT Officers.

3.5core x 35 sq.mm. Ar. Alu. UG cable ( I/C to Feeder pillar box )

4core x 10 sq.mm. Ar. Alu. UG cable ( to lighting poles and looping)

Supply and providing cable end termination of following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc., complete complying with standard specification and as directed by SIPCOT Officers.

3.5core x 35 sq.mm. Ar. Alu. UG cable ( I/C to Feeder pillar box )

4core x 10 sq.mm. Ar. Alu. UG cable ( to lighting poles and looping)

Supply & fixing of Coil earth to street light poles with No.8 SWG GI wire of 11.5 metres of length in which 10 metres of total length compressed in to a coil of one meter length (75mm to 100mm dia) connected suitable with hexagonal earth bolt of size 8mm in to 25mm welded on the pole at one end with a coil position fixed on the earth etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply, installation, testing & Commissioning of Earthing as per PWD standard with an electrode of 2.10 metre class 'B' GI pipe of die not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and run of 25mm x 6mm Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc.,complete complying with standard specification and as directed by SIPCOT Officers.

Supply and installation of PVC Rigid Pipe 50mm (2") including laying charges in street light pole foundation for power cable entry etc., complete complying with standard specification and as directed by SIPCOT Officers.

Street Light Pole Foundation Cost - 8m

Earth work excavation for foundation in all soils and sub-soils to the required depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting, and bailing out water wherever necessary and refilling the sides of foundation with excavated earth in 150mm thick layers well watered rammed and consolidated and depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 metres and lift as specified here under etc. complete complying with standard specification and as directed by SIPCOT Officers. (including refilling) ( 0 to 2.00 m depth)

Plain cement concrete 1:4:8 (One of cement, four of sand and eight of hard broken stone jelly) for foundation using 40mm gauge hard broken stone jelly inclusive of shoring, strutting, centering and bailing out water wherever necessary ramming, curing etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at above 90 cm centre to centre and supported by casuarina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre in all floor etc., complete complying with standard specification and as directed by SIPCOT Officers. (Payment for centering shall be given after the concrete is laid)

For RCC surface of Square column and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works.

Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all PCC items of works in Foundation Basement with minimum cement content of 325 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc complete complying with standard specification and as directed by SIPCOT Officers. (Foundation and basement)

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. I R.T.S. rods of all sizes of reinforcement for all Reinforced cement: concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length, No separate payment made for wastage and all other incidental charges etc. complete complying with standard specification and as directed by SIPCOT Officers. (The steel rods must be Fe 500 or Fe 550 grade of approved brand with ISI marking and necessary test certificate to be produced before using it at site)

External Power Distribution

11kV 2pole Structures: Supply, installation, & commissioning of Providing 11kV Double Pole Structure with AB Switch 12kV, 630A, 26.3kA for 3sec, 3-ph, 3 Pin type, Vertical/ Horizental Mounting type, Gang Operated, AB Switch along with Support Insulators, Base Channel down Pipe, Arcing Horns etc. complete as per technical specifications, scope of works and supply, installation, testing & commissioning HT Metering Sets with 11KV metering cubicles for HT consumers with 0.2S class 11 KV CTs & PTs bushings, connecting bus bars, control cables duly terminated suitable for supply energy measurement system and for indoor as well as outdoor application, scope of work. etc, complete complying with standard specification and as directed by SIPCOT Officers.

11 KV VCB panel:Design, engineering, manufacture, assembly, supply, erection, installation, testing, and commissioning of an 11 kV, 630A, 25 kA (for 3 seconds) HT Vacuum Circuit Breaker (VCB) panel, complete as per specification, shall be both auto and manual operated. The VCB panel shall be suitable for terminating a 3-core 11 kV HT XLPE cable for incoming and outgoing connections, with all necessary accessories and protection as per the standards. It shall be designed for installation in a three-phase, three-wire, 11 kV, 50 Hz AC distribution network with digital metering system with RS485 port and suitable class-1 CTs& PTs complete with all accessories and erected on the provided foundation etc., complete complying with standard specification and as directed by SIPCOT Officers.

11kV HT TRANSFORMERS:Supply, installation, testing & commissioning of 100kVA, 11 kV/433 V ONAN Outdoor Transformer (As per ISI 1180-Level 1), (Copper winding) Energy Efficient Level - 1 oil immersed ONAN cooled, core type continuous rating, outdoor distribution power transformer with copper winding for voltage ratio 11 KV/433 volts between phases with neutral brought out at LV side. The transformer shall be contained in a mild steel plain & radiator cooled tank, conforming to IS 1180 (Part I) of 2014 with off-load tap switch for ±10% on L.V side and ±5 % on H.V.side. The transformer shall be supplied with all accessories for Plinth Mounted Transformer such as HT & LT Cable Entry Boxes, Copper Extension for Cable End Termination for HT & LT sides, Bucholz Relay, Marshaling Box, Wheels, Channels etc., first filling of oil and consisting of all the fittings and accessories such as Inspection cover, Oil level indicator with minimum and filling level markings, on load tap changing switch with locking device & keys, H.V. Terminals- Bushings, L.V. Terminals cable box, Rating plate, Two earthing terminals, Two lifting hooks etc complete as per IS 1180 (Part I) and as amended thereafter etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply & Laying of 3C X 50 sq.mm. HT XLPE 11KV (UE) insulated aluminium armoured cable in ground up to 1200 mm deep, 500 mm wide cable trench providing sand cushioning before and after laying cable and covering with Layer of sand covering the three sides of the cable with bricks and refilling the earth to make it good as per technical specification, approved drawings and scope of work etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for size upto 120 sq.mm. 3 core HT Cable Outdoor Terminations XLPE 11KV etc. complete complying with standard specification and as directed by SIPCOT Officers.

DG set :Supply, erection, testing, commissioning of 100KVA, 415 V, 3 phase, 50 Hz, DG Set suitable for synchronisation with diesel engine at 1500 RPM coupled with alternator mounted on a channel Iron base frame, fuel tank of adequate capacity, starting batteries with leads, AMF panel, hospital type silencer, with acoustic enclosure , control panel, digital multifunctional meter with RS485 port and suitable class-1 CTs inter connecting control cable, cable end termination, including lubrication system, cooling system, all inclusive. DG set should comply with central pollution control board (CPCB) -IV norms as per the latest environment (protection) rules, the DG set should be suitable for outdoor installation having exhaust stack height of at least 2mtr from the top of the DG with cowl and as per the nearest tallest point buildings etc, complete complying with standard specification and as directed by SIPCOT Officers.

LT panel:Design, manufacture, supply, erection, testing and commissioning of main Power panel suitable for 415Volts 3Phase 4wire system, indoor/outdoor installation, made up of CRCA sheet steel of thickness not less than 2 mm with a weather proof canopy of top, double door construction, IP 55 protection, anti corrosive chemical resistant paint dust & vermin proof, cubicle type, floor mounted, undrilled gland plates at top / bottom, complete with internal wiring, ferrules, name plates, Locking System with heat shrinkable colour coded sleeve with SMC Bus bar supports with aluminium Busbar 200A, 25 kA, TPN 50 Hz, bus bars . The Panel should be fully comply to IEC 61439 part 1 & 2 of type tested assembly with incomer EB: 1Nos - 200A, 4P, 36kA, 50Hz, Microprocessor based releases MCCB, DG : 1Nos - 200A, 4P, 25kA, 50Hz, Microprocessor based releases MCCB & Trip & close Coil feature with earthing, door interlock, automatic safety shutters to shroud the bus bar side and FRP sheet barrier on the incoming and outgoing cable sides of the circuit breaker metering for each Incomer and out goings: Load Manager with RS485 Interface with Maximum Demand Indication + controller, automatic safety shutters to shroud the bus bar side and FRP sheet barrier on the incoming & outgoing cable sides of the circuit breaker with associated protections MCB's, R,Y,B Phase Indicating lamps and control circuit as required and energy meter for out going feeders etc.Out going:1Nos- 125A,4P MCCB 5Nos- 63A,4P MCCB 3no-40A , 4P, MCBwith digital multifunctional meter with RS485 port and suitable CT etc. including concrete pedestal and associated civil works etc. complete complying with standard specification and as directed by SIPCOT Officers.

LT Cable End Termination Supply and laying of the following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc. complete complying with standard specification and as directed by SIPCOT Officers.

3.5 core x 120 sq.mm. Ar. Alu. UG cable

4core x 16 sq.mm. Ar. Alu. UG cable

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc. complete complying with standard specification and as directed by SIPCOT Officers.

3.5 core x 120 sq.mm. Ar. Alu. UG cable

4core x 16 sq.mm. Ar. Alu. UG cable

Supply and providing cable end termination of following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping ,with electrical connection etc. complete complying with standard specification and as directed by SIPCOT Officers.

3.5 core x 120 sq.mm. Ar. Alu. UG cable

4core x 16 sq.mm. Ar. Alu. UG cable

Supply, installation, testing & Commissioning of Earthing as per PWD standard with an electrode of 2.10 metre class 'B' GI pipe of die not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply and run of 25X6 mm GI earth flat with necessary clamps / supports on wall / floor / ground for earth connection etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply, installation, testing & Commissioning of Plate Earthing as per PWD standard with a copper earth plate of size 600X600X3mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply and laying of 25mm x 6mm tinned copper flat with necessary clamps and supports on wall, floor, or ground for earth connection, complete in all respects as approved, etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and Run of No.8 SWG copper wire for earth connection etc. complete complying with standard specification and as directed by SIPCOT Officers.

1 PHASE UPS: Supply erection, testing, commissioning of 1 PHASE, 3 KVA, UPS WITH BATTERY - 1 HOUR BACKUP with required control MCB/Isolator in incoming and out going sides,earth connection, all other conenection etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of 8way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in wall with earth connection complete etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply and Run of 2 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS/PVS conduit pipe as required concealed in wall and ceiling with continuous earth wire connection of 10 sq mm copper wire with painting of suitable colour. etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and providing cable end termination with gland of 3 core x 10 sq.mm. copper cable with copper sockets by crimping etc with electrical connection complete etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply and installation of GI hot-dip or powder-coated 16 SWG ladder-type cable tray, with a width of 300mm and height of 50mm, including the required MS supports and other accessories etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and laying of 300mm dia RCC Hume Pipe with required coupler and accessories for laying of electrical power cable which include the earth excavation, refilling the earth etc. complete complying with standard specification and as directed by SIPCOT Officers.

Safety Accessories Supply of HT Rubber Mat installation size of 2m x 1m confirming to IS etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply of First Aid Box complete with all First Aid Medicines etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply of Shock Treatment Chart fixed in glass frame etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of 4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle etc.complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of rubber 11kV handgloves as per the IS standards Norms etc. complete complying with standard specification and as directed by SIPCOT Officers.

Foundation for DG Set

Earth work open excavation by manual means in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc.,complete complying with standard specification and as directed by SIPCOT Officers.

Cement Concrete 1:3:6 (One Cement, Three crushed stone sand and Six broken stone jelly) using 20mm size hard broken stone jelly for dummy columns,etc., excluding cost of centering shuttering reinforcement grills and fabrication charges but including Cost of Mortar Plasticizer, curing etc.complete complying with standard specification and as directed by SIPCOT Officers. (Dummy columns should be at least 1 metre height)

Supplying and filling in foundation, basement, etc with filling Stone dust/Quarry dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by SIPCOT Officers.

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15cm thick well rammed with surface vibrator, watered and consolidated etc., complete complying with standard specification and as directed by SIPCOT Officers.

Providing and laying in position, Standardised Concrete Mix M-25 Grade using In-situ Concrete batching plant/ Ready Mix Concrete (RMC) adopting weigh batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglm3 and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including Conveyance of concrete from batching plant to Work site, Electricity charges and other works & labour cost involved for concrete production, laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by SIPCOT Officers..The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (Foundation and Basement)

Brick work in In Cement Mortar 1:5 using best quality II Class Ground Moulded Chamber Burnt Bricks of size - 9" x 41/2" x 3" with Class Designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally, other type of bond shall be done as directed etc., complete complying with standard specification and as directed by SIPCOT Officers. (Foundation and Basement)

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., ccomplete complying with standard specification and as directed by SIPCOT Officers. (Payment for centering shall be given after the concrete is laid)

For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works etc all complete

For plane surface such as vertical slab,side slab,drops facia and vertical wall etc.

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. I R.T.S. rods of all sizes of reinforcement for all Reinforced cement: concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length, No separate payment made for wastage and all other incidental charges etc. complete complying with standard specification and as directed by SIPCOT Officers.. (The steel rods must be Fe 500 or Fe 550 grade of approved brand with ISI marking and necessary test certificate to be produced before using it at site) (Foundation and Basement)

Plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including mortar plasticizer at 200ml per 50Kg of cement used , hacking the surfaces and curing,in all floors etc., complete complying with standard specification and as directed by SIPCOT Officers.

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by SIPCOT Officers.

Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two Crushed Stone Sand and Four aggregate) using 6 to12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trowel, thread lining, curing etc. complete complying with standard specification and as directed by SIPCOT Officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat on cement plastered wall surface ect., complete complying with standard specification and as directed by SIPCOT Officers.

Foundation for Transformer

Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supplying and filling in foundation, basement, etc with Sand Gravel mix in ratio of 1:3 in layers of not more than 15cm thick thoroughly mixed, well watered, rammed with surface vibrator and consolidated etc. complete complying with standard specification and as directed by SIPCOT Officers.

Brick work in Cement Mortar 1:5 using best quality Burnt Clay Brick of size 9” x 4 1/2” x 3” with class designation of 7.5 conforming to IS 1077-1992 for oundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally other type of bond shall be done as directed etc., complete complying with standard specification and as directed by SIPCOT Officers. (For Foundation and B asement)

Providing and laying in position, Standardised Concrete Mix M-25 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglm3 and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by SIPCOT Officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (For Foundation and Basement)

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with standard specification and as directed by SIPCOT Officers. (Payment for centering shall be given after the concrete is laid)

For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works etc all complete Below Plinth

Providing 52mm thick granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two Crushed Stone Sand and Four aggregate) using 6 to12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trowel, thread lining, curing etc. complete complying with standard specification and as directed by SIPCOT Officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the SIPCOT officers)

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by SIPCOT Officers.

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat on cement plastered wall surface ect., complete complying with standard specification and as directed by SIPCOT Officers.

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by SIPCOT Officers. (Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire)

Supplying and filling with 40mm size Hard broken stone jelly in foundation and basement and other similar works including cost of materials, labour charges, etc., complete complying with standard specification and as directed by SIPCOT Officers.

Internal Electrification - Security Cabin

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection etc. complete complying with standard specification and as directed by SIPCOT Officers.

LT Cable and End Termination Supply and laying of the following size of PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre, with a 0.15 metre layer of sand placed below and around the cable, covering three sides with bricks, and refilling the earth to make good the surface, etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc. complete complying with standard specification and as directed by SIPCOT Officers. 3 core x 6 sq.mm. Ar. Alu. UG cable

Supply and providing cable end termination of following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc. complete complying with standard specification and as directed by SIPCOT Officers. 3 core x 6 sq.mm. Ar. Alu. UG cable

Light Point Wiring Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge PVC/MS conduit pipe wall and ceiling with MS accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with painting of Suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for Open MS conduit Light point / fan point etc.ccomplete complying with standard specification and as directed by SIPCOT Officers.

Power Point Wiring Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion etc.complete complying with standard specification and as directed by SIPCOT Officers.

Power Socket with GI Box Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate on suitable module concealed Box (GI ) in flush with wall with connections etc. complete complying with standard specification and as directed by SIPCOT Officers.

Circuit Main for Light wiring Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Continuous earth wire connection of 2.5 sq.mm copper wire with painting of Suitable colour etc. complete complying with standard specification and as directed by SIPCOT Officers.

Light Fixture and Fan Supply, installation, testing, and commissioning of industrial-type 40W, 4ft LED box-type light fitting with cool daylight, made of CRCA powder-coated body, aluminum reflectors, polycarbonate diffuser, glare-free light, suitable for surface mounting, including electronic drivers, daylight color LED lamps, interconnecting wiring, and accessories, all inclusive with suspension pipe if required, etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply, installation, testing, and commissioning of industrial-type 20W, 4ft LED box-type light fitting with cool daylight, made of CRCA powder-coated body, aluminum reflectors, polycarbonate diffuser, glare-free light, suitable for surface mounting, including electronic drivers, daylight color LED lamps, interconnecting wiring, and accessories, all inclusive with suspension pipe if required, etc., complete complying with standard specification and as directed by SIPCOT Officers.

supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of 300mm sweep AC exhaust fan, complete with necessary wall opening and making good the wall. Supply and fixing of louver shutter arrangement etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply, installation, testing & Commissioning of Earthing as per PWD standard with an electrode of 2.10 metre class 'B' GI pipe of die not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply and Run of 1 of No.8 SWG copper wire for earth connection etc., complete complying with standard specification and as directed by SIPCOT Officers.

Safety Accessories Supply of Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms etc.complete complying with standard specification and as directed by SIPCOT Officers.

Supply of First Aid Box complete with all First Aid Medicines etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply of AC Chargeable Emergency Lamp 2 x 11W PL Lamp with all connected accessories etc. ccomplete complying with standard specification and as directed by SIPCOT Officers.

Sub Total of Total Amount in Column BA (ie. Qty x Unit Rate)

Added GST of 18%

Please Enable Macros to View BoQ information