REPAIR/REPLACEMENT OF MAIN DISTRIBUTION BOARD/SUB MAIN WIRING, HEATING APPLIANCES AND SERVICING OF DG SET AT OLD CANTT AND FORT CANTT ALLAHABAD

Amount

Taking down main switches, distribution boards and cut outs of any capacity along with the exisitng boards and removing the same from site and keeping in safe custody for reuse or issue on credit to contractor and making good disturbed surface or portion of walls, complete all as specified & directed.

Taking down carefully sub main wiring of any numbers of wire on wooden batten or surface conduit or concealed conduits / casing caping any type, complete all as specified & directed.

Sub main wiring with two single core PVC insulated unsheathed, grade cable 4.0 sq.mm (nominal area) FRLS type multi stranded copper conductor and one run of 4 sq.mm nominal cross sectional area FRLS PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire connected to common earth as per IS including provision of cutting chases for conduit and sinking for boxes including making good to walls disturbed surfaces and applying finishes to match existing surfaces and laying through and including provision of 20mm dia 'medium grade' PVC conduit and fittings, complete all as specified and directed. NOTE:- (i) Two runs of 4 sq.mm copper conductor, one run of 4 sq.mm copper earth continuity conductor and one run of PVC conduit and its fittings shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Sub main wiring with two single core PVC insulated unsheathed, grade cable 6.0 sq.mm (nominal area) FRLS type multi stranded copper conductor and one run of 6 sq.mm nominal cross sectional area FRLS PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire connected to common earth as per IS including provision of cutting chases for conduit and sinking for boxes including making good to walls disturbed surfaces and applying finishes to match existing surfaces and laying through and including provision of 20mm dia 'medium grade' PVC conduit and fittings, complete all as specified and directed. NOTE:- (i) Two runs of 6 sq.mm copper conductor, one run of 6 sq.mm copper earth continuity conductor and one run of PVC conduit and its fittings shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Sub main wiring with two single core PVC insulated unsheathed, grade cable 6.0 sq.mm (nominal area) FRLS type multi stranded copper conductor and one run of 6 sq.mm nominal cross sectional area FRLS PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire connected to common earth as per IS and including provision of cutting chases for sinking for boxes inlcuding making good to walls disturbed surfaces and applying finishes to match existing surfaces and including laying in and including provision of 20mm wide PVC suface casing and caping and fittings, complete all as specified and directed. NOTE:- (i) Two runs of 6 sq.mm copper conductor, one run of 6 sq.mm copper earth continuity conductor and one run of PVC casing and caping and its fittings shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Sub main wiring with four single core PVC insulated unsheathed, grade cable 16.0 sq.mm (nominal area) FRLS type multi stranded copper conductor and two runs of 16 sq.mm nominal cross sectional area FRLS PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire connected to common earth as per IS including provision of cutting chases for conduit and sinking for boxes including making good to walls disturbed surfaces and applying finishes to match existing surfaces and laying through and including provision of 32mm dia 'medium grade' PVC conduit and fittings, complete all as specified and directed. NOTE:- (i) Four runs of 16 sq.mm copper conductor, two runs of 16 sq.mm copper earth continuity conductor and one run of PVC conduit and its fittings shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth of not less than 2.25m deep below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI earth lead of 4mm dia by means of bolts, nuts, washers of galvanised iron or steel, GI earth wire shall be protected by 15mm dia GI pipe 'light grade', GI wire meshed funnel, alternate layer of charcoal and salt on all side to earth plate upto a thickness of 150mm, filling of black cotton soil in earth pit upto GL and connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40mm thick pre-cast RCC cover (1:2:4), type B-1 (using 20mm graded crushed aggregate) mix with 8mm dia MS bars @75mm c/c both ways, mild steel handle 12mm dia, PGI funnel and wire mesh, 15mm dia GI pipe 'medium' grade(ISI marked) for watering, etc complete all as shown in electrical plate No.3 connected to earthing test point, including testing on completion, complete all as speciifed and as directed. NOTE:- The quoted rates shall also deemed to include the cost of Earth Test point and earth wire and protection pipe upto 7.5 metre beyond the earth plates electrode.

Heating element threaded/ screwed/ triangular or cup style type 1500 Watt ISI marked of suitable make without taking down Geyser, fixed in repair, complete all as specified and directed.

Heating element threaded/ screwed/ triangular or cup style type 2000 Watt ISI marked of suitable make without taking down Geyser, fixed in repair, complete all as specified and directed.

Thermostat suitable for 25 or 50 litre capacity of geyser, range 20 to 80 degree ISI marked, without taking down geyser, fixed in repair, complete all as specified and directed.

PVC connection cotton braided heavy duty with brass union/ coupling of length 450 mm with rubber washer suitable for 15 mm dia pipe for hot or cold water connection, without taking down geyser, fixed in repair, complete all as specified and directed.

Indicator lamp assembly with bulb suitable for geysers round or square type of approved make and quality as approved, without taking down geyser, fixed in repair, complete all as specified and directed.

Bib taps, cast copper alloy, chromium plated, fancy type, capstain head handle, screwed down, screwedat one end, 15mm bore, fixed in repair, complete all as specified and directed.

Stop valves, cast copper alloy, screwed down, high pressure, with capstan head handle, screwed both ends for iron pipe or for unions and fixed, chromium plated, 15 mm bore, fixed in repair, complete all as specified and directed.

One coat painting of Geyser at site by spray gun painting (without taking down Geyser) of 25 litre capacity with synthetic enamel paint including preparation of old surface and re-writing or marking MES number, complete all as specified and directed.

One coat painting of Geyser at site by spray gun painting (without taking down Geyser) of 50 litre capacity with synthetic enamel paint including preparation of old surface and re-writing or marking MES number, complete all as specified and directed.

Taking down carefully existing geyser of any capacity after disconnecting all electrical and water supply connection and removing the geyser to E&M store yard for opening and dismantling the complete geyser, cleaning all the serviceable parts throughly including descaling the geyser, completely replacing the defective/ wornout parts/ material including preparing the inventory for each geyser separately in presence of Engineer-in-Charge, reassembling the geyser testing for proper smooth functioning, including transporting to original location where re-fixing the same in position and reconnecting the geyser with electric and water supply line and testing as directed, complete all as specified and directed. NOTE:- (a) Spare parts required for replacement shall be measured and paid separately as supply only under items in Sl No. 21 to 29. (b) Unit rate quoted shall be deemed to include any minor i.e. nuts, bolts, lugs, etc. (c) Geyser shall be repaired within 5 days from the day of taking down. (d) Delay in repair and refixing after 5 days, a sum of Rs 1000 per geyser shall be levied upon contractor and deduction from contractor payment.

Repair to leakage of inner tank 25/50 litre capacity geyser by brazing or soldering, including cutting of nut, bolt, washer etc, as required with gas welding cutter and provinding new nut, bolt, washer etc including testing of leakage of tanks, complete all as specified and directed.

Supply only Inner tank made of MS 1.6 mm thick suitable for 25 litre capacity geyser, complete all as specified and directed.

Supply only Inner tank made of MS 1.6 mm thick suitable for 50 litre capacity geyser, complete all as specified and directed.

Supply only Vent assembly suitable for 25 litre capacity geyser, complete all as specified and directed.

Supply only Vent assembly suitable for 50 litre capacity geyser, complete all as specified and directed.

Supply only heating element 1500 Watt of any type adjusted in geyser, complete all as specified and directed.

Supply only heating element 2000 Watt of any type adjusted in geyser, complete all as specified and directed.

Supply only outer body of geyser made of 1.25 mm thick MS sheet suitable for 25 litre capacity geyser, complete all as specified and directed.

Supply only outer body of geyser made of 1.25 mm thick MS sheet suitable for 50 litre capacity geyser, complete all as specified and directed.

Supply only thermostat assembly suitable for 25 or 50 litre capacity of geyser, range 20 to 80 degree ISI marked, complete all as specified and directed.

Dismantling solar water heating system panel of 200 litres capacity, any make and type by removing the glass panel carefully and refixing it after cleaning dust, cleaning the water collector tubes and aluminium foil including descaling the existing hot water storage tank of any capacity and replacement of rock wool, complete all as specified and directed.

Glass panel rubber beading in replacement as per sample approval in office, complete all as specified and directed.

Thermostat suitable for solar/ electric water heater of any capacity, 6'11" long, fixed in replacement, complete all as specified and directed.

Gun metal globe or gate valve, 15mm bore,, fixed in replacement, complete all as specified and directed.

Non return valve 15mm dia made of bronze ISI marked heavy duty, fixed in repair, complete all as specified and directed.

Zebra fastener of size 12x100 mm, fixed in repair, complete all as specified and directed.

Bottom cover for geyser in two pieces made of GI sheet in required/ existing size and shape suitable for 25 litres capacity geyser including painting of two coats synthetic enamel paint over a coat of primer to match the existing, fixed in replacement, complete all as specified and directed.

Bottom cover for geyser in two pieces made of GI sheet in required/ existing size and shape suitable for 50 litres capacity geyser including painting of two coats synthetic enamel paint over a coat of primer to match the existing, fixed in replacement, complete all as specified and directed.

Laying/ fitting glass wool after removing the existing unserviceable glass wool in between the inner and outer container of geyser of any capacity and make, complete all as specified and directed.

Flexible copper lead 3 core of size 40/0.0076/2.5 sqmm, 1100 volt and making electric connection in geyser, fixed in repair, complete all as specified and directed.

Plug top of 15/16 Amps, 230 Volt capacity, three pin, fixed In repair, complete all as specified and directed. MAKE:- Anchor / Cona / SSK

Switch piano flush type single pole one way 15/16 Amps flush type, fixed In repair, complete all as spicified and directed. MAKE:- Anchor / Cona / SSK

Piano type socket, 2 in 1, 5/15 Amps, 230 V capacity, fixed In repair, complete all as spicified and directed.

Plug top of 20 Amp capacity, fixed In repair, complete all as spicified and directed.

MCB SP, 32 Amp capacity, 240 Volt, conforming to 'B' curve, 10KA breaking capacity and making connections for separate geyser circuit from main distribution board to geyser socket, fixed in repair, complete all as specified and directed. MAKE:- ABB / L&T / Legrand / SCHNEIDER

Flat plate collector panel for solar water heater of size 1000x2000 mm complete with copper tubing, tuffend glass, rubber beeding, inlet and outlet water connections of capacity 100 LPD ISI marked including taking down old unserviceable, fixed in repair, complete all as specified and directed. MAKE:- V-Guard / Inter Solar System / Tata BP / Kotak Urza

Tuffend glass suitable for flat plate collector panel of size 1000x2000 mm complete with rubber beeding after removing the existing broken glass carefully and cleaning, fixed in replacement, completely all as specified and directed. MAKE:- V-Guard / Inter Solar system / Tata BP / Kotak Urza

Repair and servicing of V guard 200 LPD or any capacity or make including descaling and cleaning of tubes, complete all as specified and directed.

Single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with & including one number MCB SP 20/25 Amps, complete all as specified and directed.

Spring loaded air release safety valve made of brass as per existing shape and size of approved make, fixed in replacement, complete all as specified and directed.

Solar water heater storage tank of capacity 200 litre with MS stand of strandard size, inletoutlet, over flow water pipe connections complete with nuts and bolts of suitable size and PCC work in 1:2:4 ratio as required at site including taking down old unserviceable, fixed in replacement complete all as specified and directed. MAKE:- V-Guard / Inter solar system / Tata BP / Kotak Urza

SPN DB, double door, 8 way, 230 Volts complete all as specified and directed. MAKE:- Indoasian / Havells / Legrand

VTPN DB, double door, 4 way, 415 Volts suitable for MCCB upto 125 A, insulated busbar assembly and neutral bar complete with IP-43 protection all as specified and directed. MAKE:- Indoasian / Havells / Legrand

MCB TPN, 415 Volts, 63 Amps, complete all as specified and directed. MAKE:- Indoasian / Havells / Legrand

MCB TPN, 415 Volts, 100 Amps, complete all as specified and directed. MAKE:- Indoasian / Havells / Legrand

MCCB, TP, 125 Amps suitable for VTPN, complete all as specified and directed. MAKE:- Indoasian / Havells / Legrand

MCB SPN, 230 Volts, 32 Amps complete all as specified and directed. MAKE:- Indoasian / Havells / Legrand

Periodical servicing of diesel engine driven Gen set 3 phase 415 volts 50 c/s AC supply by cleaning thoroughly and replacing fuel filters ,air filters, oil filters draining out engine oil etc. and replacing with new oil, tightening of all gaskets , connection of battery terminals, electric cable connections foundation bolts, coupling bolts etc including test running and tappet setting of alternator by checking and setting of voltage and frequency, for the following capacities of DG Set, complete all as specified and directed. MAKE OF DG SET:- Kirloskar / Crompton greaves / Cummins. Make of filters:- Kirloskar / CG / Fleet guard / MICO NOTE:- Engine oil, Fuel filters, Air filters, oil filters replaced will be measured and paid separately under respective items of this Schedule.

320 KVA DG SET

160 KVA DG SET

100 KVA DG SET

63/62.5 KVA DG SET

40/50 KVA DG SET

25/30 KVA DG SET

18/20 KVA DG SET

Maintenance free battery with initially charged capacity 180 AH , 12 Volt, fixed in replacement, complete all as specified and as directed. MAKE:- Exide / Amron

Maintenance free battery with initially charged capacity 150 AH , 12 Volt, fixed in replacement, complete all as specified and as directed. MAKE:- Exide / Amron

Maintenance free battery with initially charged capacity 90 AH , 12 Volt, fixed in replacement, complete all as specified and as directed. MAKE:- Exide / Amron

Radiator of 320 KVA DG Set water cooled of Kirloskar make with copper tubings including replacement of connected items such as inlet and outlet rubber hoses & all other connected items, fixed in replacement, complete all as specified and as directed.

Replacement of unserviceable radiator hose pipe set complete as per sample of D G set of following capacities, complete all as specified and directed.

320 KVA DG SET, Make: Greaves Cat Part No P21108610044

160 KVA DG SET, Make: Greaves Cat Part No P21108610044

100 KVA DG SET, Make: Greaves Cat Part No P21108610044

63/62.5 KVA DG SET, Make: Greaves Cat Part No P21108610044

40/50 KVA DG SET, Make: Greaves Cat Part No P21108610044

25/30 KVA DG SET, Make: Greaves Cat Part No P21108610044

18/20 KVA DG SET, Make: Greaves Cat Part No P21108610044

Replacement of unserviceable fan belts as per sample for DG sets of following capacities, complete all as specified and directed. MAKE: Fenner/ Grip / Dunlop

Fan belt for 320 KVA DG Set, Make: Fenner Cat Part No 02.071.01.00

Fan belt for 160 KVA DG Set, Make: Fenner Cat Part No 02.1266.01.00

Fan belt for 100 KVA DG Set, Make: Fenner Cat Part No 02.1266.01.00

Fan belt for 63/62.5 KVA DG Set, Make: Fenner Cat Part No 02.1266.01.00

Fan belt for 40/50 KVA DG Set, Make: Fenner Cat Part No 02.1266.01.00

Fan belt for 25/30 KVA DG Set, Make: Fenner Cat Part No 02.542.02.00

(g) Fan belt for 18/20 KVA DG Set, Make: Fenner Cat Part No 02.637.01.00

Replacement of stranded copper conductor battery lead for 24 volts D C grade red for (+)ve terminal and black for (-)ve terminal fitted with battery terminal at one end & battery lug at other end complete length 1.5 metre, complete all as specified and directed.

Cleaning of radiator by cleaning agent / Radiwash (MAKE:- fleetguard / coolguard) including removal/ dismantling of radiator from engine transporting to work shop or cleaned at site, soldering / brazing,testing for any leakage , remounting to its original position as per entire satisfaction, for the following capacities of DG Set, complete all as specified and directed.

320 KVA DG SET

160 KVA DG SET

100 KVA DG SET

63/62.5 KVA DG SET

40/50 KVA DG SET

25/30 KVA DG SET

18/20 KVA DG SET

Replacement of set of hose clips for DG sets of following capacities, complete all as specified and directed.

320 KVA DG SET

160 KVA DG SET

100 KVA DG SET

63/62.5 KVA DG SET

40/50 KVA DG SET

25/30 KVA DG SET

18/20 KVA DG SET

Coolant radicool SFO premix of Castrol or techno-commercially equivalent in Shell / Volvoline, complete all as specified and directed.

Drain out the old used engine oil from sump of dg sets& cleaning & refilling with new engine oil 15 W 40 up to required level including topup, complete all as specified and directed. MAKE:- Castrol / HP or techno-commercially equivalent in Shell

Replacement of defective self starter assembly by new self starter assembly 12/24 volts, complete all as specified and directed. MAKE:- Lucas Cat Part No 03.034.101 or techno-commercially equivalent in Bosch

Replacement of defective self alternator assembly by new self starter assembly 12/24 volts, complete all as specified and directed. MAKE:- Lucas Cat Part No 03.130.01 or techno-commercially equivaloent in Bosch / PMG

Replacement of PCB card Procom R E L-7-1.0 for 160/100 KVA AMF pannel, complete all as specified and directed. MAKE:- OSRAM Cat Part No 03.963.66

Replacement coil Relay-24 volts,5 Amp 240 volt AC 5Amp 30 volts DC model HJQ 22 F –VZ of make YOI Cat Part No 03.963.76 or techno-commercially equivalent in Siemens for 160/100 KVA AMF pannel, complete all as specified and directed.

Replacement of timer switch 0 to 80 seconds, Make : Asian / Ticnner, for 160/100 KVA AMF pannel, complete all as specified and directed.

Servicing of DG set 160 KVA AMF panel, setting of time delay switch, tightening of all electrical incoming and outgoing connections including replacement of cable lugs and adjustment of solenoid switches and Relays, complete all as specified and directed.

Servicing of DG set 100 KVA AMF panel, setting of time delay switch, tightening of all electrical incoming and outgoing connections including replacement of cable lugs and adjustment of solenoid switches and Relays, complete all as specified and directed.

Painting of Generating set of capacity 100 KVA to 320 KVA complete in existing colour with two coat of synthetic enamelled paint by spray machine over one coat of primer after preparation of surfaces installed at various locations of old cantt and Fort Cantt Allahabad, complete all as specified and as directed.

Painting of Generating set of capacity 18 KVA to 63 KVA complete in existing colour with two coat of synthetic enamelled paint with spray machine over one coat of primer after preparation of surfaces installed at western & eastern pocket drainage pump House, complete all as specified and as directed.

Supply and replacing in repair Euroload four pole change over with advance Neutral On load change over switch I-O-II ,Current Rating 100 Amps, 415 Volts, complete all as specified and directed. MAKE:- Havells / Indoasian / C&S

Supply and replacing in repair Euroload four pole change over with advance Neutral On load change over switch I-O-II ,Current Rating 200 Amps,415 Volts complete all as specified and directed. MAKE:- Havells / Indoasian / C&S

Supply and replacing in repair Euroload four pole change over with advance Neutral On load change over switch I-O-II ,Current Rating 400 Amps, 415 Volts complete all as specified and directed. MAKE:- Havells / Indoasian / C&S

Supply only Diesel Filter suitable for 18 KVA to 100 KVA DG set, complete all as specified and directed. MAKE:- Kirloskar Cat Part No 02.102.03 or techno-commercially equivalent in CG / KG / Cummins

Supply only Diesel Filter suitable for 160 KVA to 320 KVA DG set, complete all as specified and directed. MAKE:- Kirloskar Cat Part No 02.102.03 or techno-commercially equivalent in CG / KG / Cummins

Supply only Lub Oil filter suitable for 18 KVA to 100 KVA DG set, complete all as specified and directed. MAKE:- Kirloskar Cat Part No 03.040.08 or techno-commercially equivalent in CG / KG / Cummins

Supply only Lub Oil Filter suitable for 160 KVA to 320 KVA DG set, complete all as specified and directed. MAKE;- Kirloskar Cat Part No 03.040.08 or techno-commercially equivalent in CG / KG / Cummins

Supply only Air filter suitable for 18 KVA to 100 KVA DG set, complete all as specified and directed. MAKE:- Kirloskar Cat Part No 30.0610.20 or techno-commercially equivalent in CG / KG / Cummins

Supply only Air Filter suitable for 160 KVA to 320 KVA DG set, complete all as specified and directed. MAKE:- Kirloskar Cat Part No 30.0610.20 or techno-commercially equivalent in CG / KG / Cummins

Spare parts and accessories, as per original make, to be provided for repair of DG set (03 Nos), in respect of the following items, complete all as specified and directed. NOTE:- All spares and accessories shall be fixed in the DG set only after prior inspection and Approval of Accepting Officer, for which these shall be produced by the contractor and kept at store yard of AGE E/M Old Cantt

Kit Fuel filter, Make: Kirloskar Cat Part No 3H.123.01.00

Kit Lub oil filter, Make: Kirloskar Cat Part No 064.36.01.00

Kit bypass filter, Make: Kirloskar Cat Part No 3H.133.01.00

Kit Air cleaner, Make: Kirloskar Cat Part No 4H11.98.02

Air filter, Make: Kirloskar Cat Part No 4H11.98.01

Upper Gasket set (Cylinder head), Make: Kirloskar Cat Part No 4H.007.24.00

Valve exhaust, Make: Kirloskar Cat Part No 4H.007.400.00

Valve inlet, Make: Kirloskar Cat Part No 4H.007.300.00

Valve seat Exhaust, Make: Kirloskar Cat Part No 4H.007.03.00

Valve seat Inlet, Make: Kirloskar Cat Part No 4H.007.04.00

Guide valve, Make: Kirloskar Cat Part No 4H.007.020.00

Collet Valve, Make: Kirloskar Cat Part No 02.0024.01.0.00

Spring valve, Make: Kirloskar Cat Part No 50540/09X016

Kit turbo charging, Make: Kirloskar Cat Part No 6H.029.10.000

Collar thrust, Make: Kirloskar Cat Part No 6H.001.03.000

Kit injector, Make: Kirloskar Cat Part No 4H.154.10.000(MICO)

Kit Piston and ring set, Make: Kirloskar Cat Part No 4H.180.01.000/ ZH.0009.02.0.00

Kit Cylinder liner, Make: Kirloskar Cat Part No 2H.008.07.0.00

Kit Sump Gasket, Make: Kirloskar Cat Part No 06.074.20.0.00

Gear pump assembly (Fuel pump FIP), Make: Kirloskar Cat Part No 2H.011.01.0.00

Weight & carrier

Barrel sleave, Make: Kirloskar Cat Part No 02.035.07.000

Gasket Set, Make: Kirloskar Cat Part No 6H

Sexen filter

Governor pressure valve (Hydraulic Governor)

Gear assembly, Make: Kirloskar Cat Part No 6H.020.01.0.00

Ball bearing, Make: Kirloskar Cat Part No 6305

Head gasket, Make: Kirloskar Cat Part No 6H.02.001

Nozzle

Block, Make: Kirloskar Cat Part No 6H.001.25.0.00

Liner, Make: Kirloskar Cat Part No 2H.008.01.0.00

Battery terminal,

Packing Kit, Make: Kirloskar Cat Part No 4H.0.87.40.0

Crank, Make: Kirloskar Cat Part No 6H.0002.00.00

Main bearing, Make: Kirloskar Cat Part No 6H.001.06.0.00

CR bearing, Make: Kirloskar Cat Part No BO.73.400

Came bush, Make: Kirloskar Cat Part No 03.001.04.0.00

Connecting Rod, Make: Kirloskar Cat Part No 4H.182.10.0.00

Rod balancing

Bush, Make: Kirloskar Cat Part No 4H.182.02.000

Third washer, Make: Kirloskar Cat Part No 6H.001.03.0.00

Valve seal, Make: Kirloskar Cat Part No 06.631.02.000

Spare parts and accessories, as per original make, to be provided for repair of DG set (01 No), in respect of the following items, complete all as specified and directed. NOTE:- All spares and accessories shall be fixed in the DG set only after prior inspection and Approval of Accepting Officer, for which these shall be produced by the contractor and kept at store yard of AGE E/M Old Cantt

Kit Fuel filter, Make: Kirloskar Cat Part No 3R.123.01.00

Kit Lub oil filter, Make: Kirloskar Cat Part No 034.36.01.00

Kit bypass filter, Make: Kirloskar Cat Part No 3R.133.01.00

Kit Air cleaner, Make: Kirloskar Cat Part No 3R1198.02.00

Air filter, Make: Kirloskar Cat Part No 4R.11.98.01.00

Upper Gasket set (Cylinder head), Make: Kirloskar Cat Part No 3R.007.24.00

Valve exhaust, Make: Kirloskar Cat Part No 3R.007.400.00

Valve inlet, Make: Kirloskar Cat Part No 3R.007.300.00

Valve seat Exhaust, Make: Kirloskar Cat Part No 3R.007.03.00

Valve seat Inlet, Make: Kirloskar Cat Part No 3R.007.04.00

Guide valve, Make: Kirloskar Cat Part No 3R.007.020.00

Collet Valve, Make: Kirloskar Cat Part No 03.0024.01.0.00

Spring valve, Make: Kirloskar Cat Part No 50540/09X016

Kit turbo charging, Make: Kirloskar Cat Part No 3R.029.10.000

Collar thrust Make: Kirloskar Cat Part No 3R.001.03.000

Kit injector repair, Make: Kirloskar Cat Part No 3R.154.10.0.00(MICO)

Kit Piston and ring set, Make: Kirloskar Cat Part No 3R.180.01.000/ ZH.0009.02.0.00

Kit Cylinder liner, Make: Kirloskar Cat Part No 3R.008.07.0.00

Kit Sump Gasket, Make: Kirloskar Cat Part No 03.074.20.0.00

Gear pump assembly (Fuel pump FIP), Make: Kirloskar Cat Part No 3R.011.01.0.00

Weight & carrier

Barrel sleave, Make: Kirloskar Cat Part No 03.035.07.0000

Gasket Set, Make: Kirloskar Cat Part No 3R

Sexen filter

Governor pressure valve (Hydraulic Governor)

Gear assembly, Make: Kirloskar Cat Part No 3R.020.01.0.00

Ball bearing, Make: Kirloskar Cat Part No 3305

Dismantling of DG Set Alternator of capacity 63 / 62.5 KVA carefully and carrying to authorised workshop for repair and re-fixing the same in its original position after repair and testing the same up to the entire satisfaction of Accepting Officer, complete all as specified and directed.

Cutting out old burnt winding of alternator, cleaning the slot of stator and rewinding the same with super enamelled copper winding wire of appropriate gauge complete with all insulating materials, Nomex paper, cotton tape, glass sleeve, soldering rod, Grease etc., complete all as specified and directed.

Repairing of armature shaft both side by depositing metal on it, grinding and polishing to make appropriate size of the shaft, complete all as specified and directed.

Supply and replacing Ball bearing at DE (Driven End) side, No. 6310, complete all as specified and directed. MAKE:- NBC / SKF

Supply and replacing rectifier Diode, complete all as specified and directed.

Supply and replacing AVR (Automatic Voltage Regulator), complete all as specified and directed.

Supply and replacing connetion plate of suitable size, complete all as specified and directed.

Dismantling of DG Set Alternator of capacity 100 / 160 KVA carefully and carrying to authorised workshop for repair and re-fixing the same in its original position after repair and testing the same up to the entire satisfaction of Accepting Officer, complete all as specified and direted.

Cutting out old burnt winding of alternator, cleaning the slot of stator and rewinding the same with super enamelled copper winding wire of appropriate gauge complete with all insulating materials, Nomex paper, cotton tape, glass sleeve, soldering rod, Grease etc., complete all as specified and directed.

Repairing of armature shaft both side by depositing metal on it, grinding and polishing to make appropriate size of the shaft, complete all as specified and directed.

Supply and replacing Ball bearing at DE (Driven End) side, No. 6310 / 6311 / 6312 / 6314, complete all as specified and directed. MAKE:- NBC / SKF

Supply and replacing rectifier Diode, complete all as specified and directed.

Supply and replacing AVR (Automatic Voltage Regulator), TVR-20, complete all as specified and directed.

Supply and replacing connetion plate of suitable size, complete all as specified and directed.

Dismantling of DG Set Alternator of capacity 25 / 30 / 40 KVA carefully and carrying to authorised workshop for repair and re-fixing the same in its original position after repair and testing the same up to the entire satisfaction of Accepting Officer, complete all as specified and direted.

Cutting out old burnt winding of alternator, cleaning the slot of stator and rewinding the same with super enamelled copper winding wire of appropriate gauge complete with all insulating materials, Nomex paper, cotton tape, glass sleeve, soldering rod, Grease etc., complete all as specified and directed.

Repairing of armature shaft both side by depositing metal on it, grinding and polishing to make appropriate size of the shaft, complete all as specified and directed.

Supply and replacing Ball bearing at DE (Driven End) side, No. 6310 / 6311 / 6312 / 6314, complete all as specified and directed. MAKE:- NBC / SKF

Supply and replacing rectifier Diode, complete all as specified and directed.

Supply and replacing AVR (Automatic Voltage Regulator), complete all as specified and directed.

Supply and replacing connetion plate of suitable size, complete all as specified and directed.

MCCB 100 Amps, 415 Volts, 4 Pole, breaking capacity 16 / 25 KA, ISI Marked, Fixed type, fixed in repair, complete all as specified and directed. MAKE:- C&S / L&T / Indo-Asian / Havells

MCCB 200 Amps, 415 Volts, 4 Pole, breaking capacity 25KA, ISI Marked, Adjustable type, fixed in repair, complete all as specified and directed. MAKE:- C&S / L&T / Indo-Asian / Havells

M/S SS Tarders

Ambrish Builders

Minakshi constuction co.

Supreme Builders