SPECIAL REPAIR TO BLDG NO LAV01 TO LAV04 AND SINGLE LIVING OFFR ACCN BLDG NO P05 NEAR HARKIRAT ROAD AT OAC UNDER GE AMRITSAR

Amount

Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) exc 1.50 sqm and n.exc 4.00 sqm each all as specified and directed.

Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed

Supply and fixing framed work as door, chowkhats, and Grill gates of angle frame work fixed with Nut & bolt to wall or other section complete drilling or fixing welding be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also festering and fixing complete.

Supply and fixing, factory made, 30 mm thick flush shutter, with block board core solid with plywood face panels, commercial type on both sides and one face covered with decorative face veneered with leeping / frame complete all as specified.

Supply and fixing 35mm thick second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges for receiving glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed.

Supply and fixing solid PVC door frame, size 50x47mm, made of 5mm thick plain colour PVC sheet reinforced with MS square tube complete as specified and directed.

Supplying & fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing given in Section 8 of SSR Part –II 2010.

S&F 150 mm long aluminium anodised barrel tower bolts and extrude section and fixed.

S&F 150 mm long extruded aluminium alloy handles, fabricated type anodised

Suppling and fixing Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed Complete all as spc.

S&F 300mm mild steel ordinary rat tail rod pattern spring including roller plate including fixing with nailsd/ bolts or welded compete all as specified.

M&L for cutting openings,through brick walls built in cement mortar for ventilator or windows and other openings or enlarging existing openings,converting window into door openings etc or cutting out defective brick work, including providing,fixing and removing shoring,cleaning and stacking bricks,removing surplus serviceable bricks,hard core etc to store and rubbish n.exc 50m complete all as specified and directed.

Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 complete all as specified. NOTE : , Guard bar, Sheet glass and painting shall be measured and paid Separately.

Supplying and fixing 3mm thick ordinary sheet glass and glazing with oil putty or fixed with wooden beading, in squares not exc 0.50 Sqm in each panes complete all as specified.

Supplying and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples or wooden beads complete all as specified.

S&F butt hinges 100mm size medium extruded alumunium alloywith galvanised mild steel hinge pin anodised type C 21 all As specified and directed.

Roughning surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc.

Material and labour PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in hold fast block, coping, rounded or chamfered on edges and like including weathering, slightly rounded or chamfered angles and throating etc incuding necessary form work complete all as specified.

Dismantling Brick tiles single layers on roof jointed and grouted /pointed in cement mortar including cleaning serviceable tiles and stacking for re use and disposing unserviceable tiles/ debris on roofs complete all as specified and directed

Material and labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm includingcleaning surfaces etc complete all as specified

Material and labour for cutting groves in brick wall 75mm wide and 65 mm deep and shaping horizontal face of groove with cement mortarb 1:3 after inserting /fixing APP membrane into the grove complete all as specified and directed .

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specifed and directed and dispose off from site

Material and labour for 40mm thick brick tiles, laid on and including 15 mm thick cement plaster in cement mortar 1:4 and joints grouted and pointed in neat cement slurry complete all as specified and directed.

Material and labour for 40mm thick using old serviceable brick tiles, laid on and including 15 mm thick cement plaster in cement mortar 1:6 and joints grouted and pointed flush in CM 1:3 mixed with 5% crude oil by weight of cement, complete all as specified and directed. Note:-Old serviceable tiles shall be reused.

Material and labour PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in roof kerbs, sloping padding and finishing the surface even and smooth (without using extra cement) complete all as specified.

Material & Labour for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on bituminous surfaces and including over a two coats of Aluminium paint complete all specified.

Dismantling timber scantling 40 Sqcm and over in section any position as in framed works.

S&F rolled mild stuctural steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee, angle channel or flat sections) incl distance pieces, cleats etc., onforming to Fe-410-W (Gde-E-250) quality-A.

M&L for two coats of synthetic enamel paint on steel surface exc 10 cm width or girth on one coat of primer (Red oxide Zinc crown) incl preparation of old/new surfaces complete.

Dismantling of Asbestos Cement Corrugated or semi corrugated sheets in Roof Covering of any gauge and Thickness all as specified and directed.

S&F prepainted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength 550 MPA as in roof covering in roof covering with self tapping screws / L type or J type hook as specified

S&F pre-painted galvalume aluminium zinc coating GI based plain sheet steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing servicieable tiles to store and rubbish off the premises.

Material and labour for 25 mm thick PCC 1:2:4, type B-1,(using 20mm graded crushed stone aggregate)40MM as in sub base under floor finishing complete all as speciified.

S&F coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6.

S&F coloured Glazed ceramic tile in verticle surface 350x250x7 mm/ 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick screed bed in cement mortar 1:4.

Demolition of brick work built in cement mortar, seperation, cleaning and stacking of serviceable bricks for reuse and removal of debris,rubbish to a distance exc 400 m but not exc 500m complete all as specified.

M&L for brick work with sub class 'B', old size bricks, straight or curved on plan, exceeding 6 metre mean radius, built in cement mortar 1:6 complete all as specified.

M&L for brick work with sub class 'B', old size old serviceable brick obtained from dismantling, straight or curved on plan, exceeding 6 metre mean radius, built in cement mortar 1:6 complete all as specified. Note: Old serviceable brick obtained from dismantling to be reused.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4.

Taking down cement plaster from wall’s/ceiling including raking out joints hacking for key scrubbing down with water complete.

M&L for 15mm rendering in cement mortar (1:6) on brick/concrete surfaces finished the surface even and smooth without using extra cement.

M&L for 15mm rendering in cement mortar (1:4) on brick/concrete surfaces finished the surface even and smooth without using extra cement.

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces of ceiling in cement mortar 1:3 complete all as specified and directed by EIC.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.

M&L preparation of old plastered surfaces of walls and applying two coats of white wash complete all as specified and directed by Engr-in-Charge.

M&L for complete removal of Existing surfaces of ceiling and applying three coats of white wash.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of white wash.

Material and Labour for complete removal of existing treatment by wire brushing and washing, rubbing down and stopping of surfaces and applying two coats of cement base paint on walls complete all as specified.

Demolition of PCC as in ground floor & Paving nxc 15cm (Below or above) ground level including disposal of rubbish to a distance nxc 500mtr where directed.

M&L 75 mm thick cement concrete type C-2 1:3:6 (using 40 mm graded crushed stone aggregate), as in sub base of floors.

S&F machine pressed precast concrete interlocking paver block any shape and size with grey cement and no pigment conforming to IS 15658-2006 of 60 mm thickness M-35 Grade over and incl 25 mm thich san cushioning

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in 50mm thick plinths protection and as in path complete all as specified and directed.

Taking down G.I tubing/pvc/ppr15mm bore including connections & clearing for re-fixing or removal to store

Taking down G.I tubing/pvc/ppr20mm bore including connections & clearing for re-fixing or removal to store

S&F 15mm bore G.I tube medium grade freed to wall or under floor complete including cutting closes and make good in CM 1:3 complete.

S&F 20mm bore G.I tube medium grade freed to wall or under floor complete including cutting closes and make good in CM 1:3 complete.

Fixing only 15mm bore G.I Tubing in new or old location with all fittings complete. Note : reusable pipes obtained in item No 57 shall be used.

Fixing only 20 mm bore G.I Tubing in new or old location with all fittings complete. Note : reusable pipes obtained in item No 58 shall be used.

Dismantling to water tanks of capacity exc 500 ltrs and not exc 1000 ltr complete.

S&F 1000 Ltr rotational moulded poly-ethylene tripple layered water tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

Supply and fixing bib tap long body 15mm dia chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F 15 mm bore stop valves, fancy type chromium plated cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed.

S&F 15 mm bore gun,metal, globe or gate valves, with irion wheel head, screwed for iron pipe or brass ferrule and fixed.

S&F 20 mm bore gun-,metal, globe or gate valves, with irion wheel head, screwed for iron pipe or brass ferrule and fixed.

S&F 20 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe of brass ferrule and fixed.

S&F grating doom 125 mm dia with waste hole of PTMT. (Min wt 40 gms).

S&F Vitreous china urinal, half stall type, white , complete including spreader, providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with & including 60 mm long brass screw, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm.

Dismantling cast iron/ PVC/SGSW pipe any dia fixed to wall or in trenches with any type of joints

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid on walls complete all as specified & directed by Engineer-in-Charge.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed by Engineer-in-Charge.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed by Engineer-in-Charge.

S&F 110 mm bore PVC (SWR) bends any radius with access door

S&F 75 mm bore PVC (SWR) bends any radius with access door

M& 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified & directed by Engineer-in-Charge.

S & F in repair washdown water closet orrissa pattern size 580x440mm white with integral footrest and trap, including connection to drain and to flushing pipe incl making good to floor and flush pipe and joint between flushing pipe and sockets of water closet pan.

S & F in repair vitreous china washdown water closet pan & trap (pedestal pattern) with plastic water closet seat black closet pattern with flat bottom and cover and mild steel chromium plated or aluminium hinginng device with flush pipe to pedestal pan incl all joints incl connection to drain pipe and flush pipe.

S&F in repair PVC low level flushing cistern 10 ltr capacity, valveless, syphonic action type with inlet, ball valve float and handle incl brakcet and flush pipe 32 mm dia.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil.

Removing excavated material (soil) exc 250 m but n.exc 500 m and depositing where directed.

Demolition and breaking up drain pipes 150 mm bore (Salt glazed ware, AC or Reinforced concrete) set in cement mortar

S&F drain pipes of 150mm boreSlat-glazed stoneware drain pipes laid in trenches and joints as specified

M & L cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete.

Concrete bed to drain pipes including packing under, and hunching against the sides of pipes 150mm bore in cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate ) after they are laid and tested of pipe complete all as specified

M &L providing cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in surface of channel,drain,benching and PCC bend for top of manhole brick work etc with slightly chamfered or rounded angles including necessary form works , if any and finishing exposed suface even and smooth without using extra cement etc complete all as specified and as directed.

M &L providing cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) in lintel upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, stringcourses lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones bed plates,kerbs incl weathering slightly rounded or chemfered angles and throating Including formwork as required as directed.

Material & Labour for 15 mm thick plaster in CM (1:4) finished even and smooth with out using extra cement using WPC (WPC shall be as per manufacture with measured and paid separately).

M&L providing precast cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in landings, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs setting with cement mortar 1:4 and including form work complete all as specified and directed.

S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (anealed) not less than 0.9 mm dia or securing with clips.

S&F mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (anealed) not less than 0.9 mm dia or securing with clips.

M & L for taking down alumunium door /window shutters of any descriptions taking down old serviceable glass of any thickness any size any description removing glazing beads /putty/ neoprane etc checking /tightening the joining cleats in posistion incl supply and fixing of new joining cleats if broken with brass screws glazing beads /putty/neoprane/if damaged refixing the old serviceable glass and refixing the same openinig . NOTE if glass is broken before taking out /down shall be paid and measured seperately.

Taking down floor door spring any descriprtion and making disturbed surface /area good so as to receive the new spring incl increasing /decreasing the area as specified and directed.

S & F Double door action floor spring hydraucally regulated made up of min 1.25 mm thick alumunium alloy sheet foundation box main body with stainless steel cover governing pivot made up of brass and other part made up of mild steel heavy duty and fixed complete all as specified and directed.

S & F godrej pattern cubboard shutter made up of 1.25mm thick MS BLACK SHEET fixed on frame with any description including fixing of necessary fittings such as cromium plated handle lugs ,hinges locking arrangement including two coat of synthetic enamel paint overv a coat primer as per trade practice area n.exc 2 sqwm all as specified

Supply and fixing angle cock, concealed, 15mm bore, chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or union complete all as specified.

S&F brass chromium plated pressure adjustable shower rose 125mm size fixing to CI pipe or union complete all as specified.

S&F 15 mm bore CP mixer for mixing hot and cold water screwed down for iron pipi and fixed in repairs .

Supply and fixing, pillar taps fancy cast copper along with capstan heads chromium plated swan neck screwed down high pressure with or without coppered H or c with screwed shanks and fly nuts screwed for iron pipe size 15mm fixed in repair .

Supply and fixing, in repairs PVC mirror cabinet with shelves of best quality including fixing arrangements size 350x450 mm.

Supplying and fixing, vitreous china wash hand basin,oval flat back, including mild steel brackets, erecting stand , PVC heavy duty waste pipe,coupling connection complete all as specified.

S&F in replacement PVC waste pipe 32mm dia having length pf 450 mm complete all as specified and directed.

S&F flushing jet including pipe for European type closet incl fixing to 15 mm dia pipe suitable length with brass check nut complete all as specified and directed.

S&F cast iron floor trap of 75mm out let dia including gratting and fixed to outlet pipe cvomplete all as specified and directed.

Supply and fixing, 25mm dia MS pipe PVC sheathed, decorative fancy type, curtain rod including brackets & a set of ABS finials with rings minimum 08 nos complete all as specified .

Dismanteling wall and ceiling boards or insulation boards slab blankets etc any thickness any description including fixing arrangement complete

S &F GI frame work for seamless ceiling comprising of GI perimetre channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixe to surroundings wall using nylon sleves and screws as 450 mm centre to centre intermediate channel 0.9mm thick having two equal flanges of 15mm each and the web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fastners with and including ceiling sections of 0.55mm thickness having curled web of 50mm and flange of 26mm each with the lip of 10.5mm fixed to intermediate channel with connecrting clips across the intermediate channel at 457mm centre to centre.

S & F for hangers 6mm dia (up to 1200 mm length) adjusting level fixed to roof slab by the means of ceiling cleats made out of GI flats 40 x 3 mm size 60mm long and expansion hold fastner 12.5 mm dia 40 mm long complete all as specified

M&L for gypsum board 12mm thick in ceiling fixed with screws as per manufacturer instruction.

M&L for applying an average 01 mm wall putty to interior or exterior type on ceiling on false ceiling complete all as specified.

M&L for applying 02 coat of OBD on ceiling including preparation of under cored surfaces.

Material and labour for RCC 1:2:4 type B-1(using 20 mm graded stone aggregates),as in slabs, beams,shelves, chajjas, landing balconies ,shelves etc including demolistion of old RCC slab and removing the debris from site complete all as specified and directed

Use and waste of form work to soffits of suspended slab such as roof slab ,floor slab, shelves, chajjas etc not exc 200 mm thick including sides/edges complete all as specified.

Use and waste of formwork to sides of concrete flats,treads break in floors window cills floors and roof n.exc 20cm wide and sides of RCC /PCC bands in walls horizontal or sloping and similar work exceeding 5 cm but n.exc 10cm complete all as specified and directed.

M &L providing cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in coping to parapet walls complete all as specified and as directed.

M&L for two coat of OBD above a coat of primer on old surface on walls including complete removal of old treatment and 3mm thick wall putty on previous decorated surface.

Material and labour for marble 16-17 mm thick, any type, table rubbed and polished, in cooking plateformsteps, pillars, window cills and like, set in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of marble over and including 15mm thick cement screed bed in CM (1:4), including taking down existing stone slab, tiles etc complete all as specified

S&F 4mm Thick figured glass, pin headed type glazing with oil putty in Square not exceeding 0.50 Sqm fixed with metal clips compete

S&F 15mm bore stop cock concealed long shank chromium plated fancy type screwed down high pressure complete all as specified

S&F PVC (SWR) function single equal or unequal 110mm bore dia

S&F PVC (SWR) vent Cowl 110mm bore dia

S&F stack clamps made out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts & nuts and securing ends of stay to wall or roof

M&L for two coats of OBD including preparation of surface on newly plastered wall surface complete all as specified.

M&L for three coats of white wash to ceiling complete all as specified.

Supply only water proofing compound

Taking down aluminium point wiring from existing conduit / batten (light, fan, socket or power) complete such as switches, ceiling rose, pendent, regulators, socket, light fittings etc and removing material from site and making good the disturbed surface of wall / floor etc, complete all as specified and directed

M&L for point wiring with 1.5 sqmm (Nominal area ) 1100 Volt PVC Insulated , FR unsheathed and multi stranded copper conductor cable in and including new PVC Concealed conduit not less than 20mm dia 1.5mm thick for one light / fan point or bell point controlled by one switch (including cutting chases and making good the distributed surfaces) and fixing new 3mm thick hylem sheet top cover, sheet screws and 1.6mm thick GI sunken boxes after removing old unserviceable plastic laminated sheeet and sunken boxes included 1.5 Sqmm FR stranded copper conductor with green PVC Insulation earth continuity conductor connected to common earth dolly etc . complete all as specified and directed for the following :- Note : The cost of sunken boxes and bakellite sheet is included in the quoted rate)

All as per item No 128 here-in-above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 1.5 Sq mm copper solid conductor connecting to common earth dolly complete.

Supply and Fixing of switch piano type 5 Amps one way 230 volts AC complete all as specified and as directed

Supply and Fixing of switch outlet 2 in1 3 PIN type 15 Amps flush type complete all as specified and as directed

Supply and fixing of ceiling rose 65X 32 mm two to three terminals complete all as specified.

Supply and fixing of Modular switch 6 Amp 1 way 01 module size complete all as specified and as directed.

Supply and fixing of MODULAR SWITCH 16 AMP multipurpose type 2 module size complete all as specified and as directed.

Supply and fixing of modular socket shuttered 6 amps 2/3 pin combined 2 module size complete all as specified and as directed.

Supply and fixing of modular Supply and fix stepped type electronic fan regulator 120 watt 2 module size type all as specified and directed.

Supply and fixing of module type single pole 5 amps complete all as specified and as directed.

Supply and fixing of modular blank plate 1 module size complete all as specified and as directed.

Supply and fixing of SINGLE PHASE call bell DING DONG AC 230 volt single pole fixed over and incl pressed sunk steel box of size 175 x 100 mm duly covered with 3mm thick bakelite sheet compl all as specified and directed

M&L in replacemnt of lamp holder PVC /POLYCARBONATE type with cord grip cap suitable for pendant /battern fittings complete all as specified and directed.

Supply & Fixing on wall /ceiling mounted LED 18 W diffusor tube light fittings complete with all assesories 1x 18 W LED suitable for domestic purpose 240 Volts 50HZ including one tubelight rod and internally pre wired with 1.5 sqm twin twisted flexible and directed.

S &F in replacement of LED bulk head light fittings 10watt white including LEDstrip as per IP65 in enginnering plastic housing withclear prismatic diffuser and making necessary connections complete all as specified

Supply and fixing in repair MCB single pole 6 to 32 Amps repturing capacity 10 KA C curved type complete all asd specified and directed

Supply and fixing of MCB double pole 40 to 63 Amps repturing capacity 10 KA C curved type complete all asd specified and directed

Supply and fixing of SP MCB 40 AMP complete all asd specified and directed

Supply and Fixing of socket outlet 3 pin each suitable for 5 and 15 Amps flush type 250 volts AC complete all as specified and as directed

Supply and laying common burnt clay bricks, old size, sub class 'B', laying in trenches for protection of under ground cable, laid flat, length of brick perpendicular to length of cable complete all as specified.

M & L sand cushioning with layer of sand 08 mm thick before laying of cable in trenches & 15mm complete all as specified and directed. Note : Punned thickness shall be measured

Supply and laying GI Pipe 40mm medium grade 1.2 mtr long made to shape with fixing clamps of MS Flat 40x6mm nuts bolts etc for street light all as specified vand direceted.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade ) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 1991 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switche, DBs) complete all as specified & testing on completion.

Supply and fixing Distribution Board, double door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections including taking down old unservicable boards complete all as specified and directed.

Supply and fixing of blanking plate PVC made of standard size complete all as specified and as directed ( suitable fordistribution board)

S & F IN REPAIR 40 MM BORE LIGHT GRADE GALVANISED IRON TUBING WITH ALL NECESSARY GI fittings as in protection pipe of cable ,fixed to pole or laid under floor /ground under road crossings for protection of cable complete all as specified and directed.

Supply and fix wall/ceing mounting LED 09 Watt HIGH quality sleek alumunium extruded tube light fittings compl with all acessories 1 x9 watt LED suitable for domestic application 240Volts 50HZ including one tube rode and internally pre-wired with 1.5 sqmm twin twisted flexible copper conductor complete all as specified and directed.

Supply and fixing MCCB incomer Distribution Board, double door,vertical type made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and surface mounting with IP 43 & IK 09 protection, surface mounting, TPN 04 way, 415 volts with copper bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB and isolators etc.Making all necessary connections including MCCB 100 Amps 36 KA,4 pole MCCB with thermal magnetic setting and Icu=lcs=100% with taking down old unservicable boards complete all as specified and directed.

Supply and fixing in replacement, security light LED 25 watt, aluminium pressure die cast housing with touched glass cover IP-66 protection including accessories, fixed on and including GI light grade pipe bracket 1.2 m length, made to shape and necessary MS clamps, bolts, nuts complete all as specified.

M&L for SUB main wiring with 1.5 sqmm (Nominal area ) 1100 Volt grade two single core PVC Insulated , and unsheathed cable with stranded copper conductor cable 6 sqmm drawn into and including electrical grade PVC conduit not less than 25 mm dia with IS 9537 (PART 111) (including cutting chases and making good the distributed surfaces) IN BRICK / STONE MASSONARY FOR FIXING CONDUIT and making good the disturb surfaces of wall as per existing incl 6 sqmm multi stranded copper conductor as earth wire in green colour complete all as specified and directed

M&L for boring hole under road/path/floor etc laying of XLPE cables any size and type all as specified and directed at site by Engineer-in-Charge

M&L for point wiring with 1.5 sqmm (Nominal area ) FR PVC Insulated , unsheathed and stranded copper conductor cable ISI marked and including PVC Concealed conduit ISI marked of size 50mm dia 1.5mm wall thickness and conduit fitting including FR PVC insulated unsheathed 1.5 Sqmm copper earth wire to common earth and connecting to earth dolly and Metal flush box, cover plate with frame of suitable size for fixing modular switches/sockets/fan regulator etc complete all as specified for the following (Note : Cost of Metal boxes and modular accessories like cover plates will be included in quoted rate) (a) Fan point/exhaust fan point/one light point/bell/buzzer controlled by one switch/bell push

All as per item above but one socket outlet point 5 amps on the same board

All as per item No 159 above but one socket outlet point 5 amps on the intependent board

Point wiring complete with 2.5 Sqmm (nominal are) FR PVC insulated un-sheated and stranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 25mm dia and 2.5 mm wall thickness and conduit fitting including FR PVC insulated unsheathed 1.5 Sqmm copper earth wire to common earth and connecting to earth dolly and metal flush box, cover plate with frame of suitable size for fixing modular switches/sockets/fan regulator etc. complete all as specified for the folling (Note : Cost of Metal boxes and modular accessories like cover plates will be included in quoted rate) (a) Fan point/exhaust fan point/one light point/bell/buzzer controlled by on switch/bell push

M& L for laying of LT cable of 1100 volt XLPE insulated and PVC sheathed of size 25 Sqmm 4 Core with cable gland including taking down old unserviceable cable complete all as specifed and directed by Engineer-in-Charge

S&F modular socket 16A multipurpose type 2 modular size complete all as specifed and directed by Engineer-in-Charge

S&F modular switch and socket (starter) 25 A capacity for AC complete all as specifed and directed by Engineer-in-Charge

Supply & fixing, exhaust fan, heavy duty AC 300mm sweep metal body AC 230 volts,single phase 50HZ AC supply and connecting up with and including two core pvc insulated pvc sheathed copper conductor flexible cable 24/0.2mm and fixed by using nut and bolts 230mm sweep, metallic body complete with louvers and shutters including making hole in brick wall for fixing exhaust fan and making good the surface to match with existing surfaces complete all as specified.

Supply & laying of XLPE insulated armoured heavy duty electric cable with aluninium conductor 1100 volt grade cross section area 2 core 16 sqmm conforming to IS 7098 part I with cable gland including taking down old unserviceable cable complete all as specified and directed .

M/s. M Company