PROCUREMENT OF EQUIPMENT, INSTRUMENT, MACHINERIES, TOOLS

CNC Vertical Milling Machine

Outside Vernier micrometer 0-25mm

Outside Vernier micrometer 25-50mm

Universal Bevel Protractor

Inside Micrometer 50-300mm

Digital Tachometer

Angle Block Set

Torque Wrench

Sling Psychrometer with Anemometer

Experimental setup for Measurement of temperature using Thermocouple, RTD, Thermistor

Pyranometer with Shading ring facility

Linear variable differential transducer (LVDT) trainer

Thermistor Trainer Kit

Master ring gauge : Dia. 60,80,90,100, mm

Stroboscope

Angle Grinder

Working model of starter motor

Working Model of Diesel Fuel Injection System

Actual Cut Section Model of Air Brake- Non-Working

Model of Battery Charging System with Dynamo

Cut Section Model of single plate coil spring type clutch

Electro-Pneumatic Trainer Kit

Cut Section Model of Shell & Tube Heat exchanger

Cut Section Model of Plate type Heat exchanger

Actual model (old) of a room air-conditioner (window type)

Cut section model of hermetically sealed compressor

Working Model of a Hydro-Electric Power Plant

Portable inverter based single phase arc welding machine

Spot Welding Machine 15KVA

INVERTER-BASED DC TIG AND DC PULSED TIG WELDING MACHINE

Inverter-Based MIG welding Machine

Model of Refrigerator- Actual Cut Section

Abrasive cut off Machine (Chop Saw Metal Cutter)

Melting pot for Casting 2Ltrs

Digital Torsion Testing Machine

Friction Set-up with horizontal Plane

Cut out Model of Reciprocating Compressor

Air Compressor Test Rig

Cut section Model of Centrifugal Compressor

A vapor compression refrigeration system / Domestic Refrigerator

Stefan-Boltzmann’s Apparatus

Thermal Conductivity of Metal Rod

Cut Section Model of Fire Tube Cochran Boiler

Model of La-Mont Boiler (water tube boiler)

Model of La-Mont Boiler (water tube boiler)

Dial indicator (Lever Type) with Magnetic Stand

CNC Lathe Machine

Grinding Machine

Air Conditioning Test Rig

Test rig of water cooler to determine capacity, COP

Thermostatic Expansion Valve, Low pressure

Hermetically sealed Compressor

Cut-out section of 2- stroke single cylinder petrol engine

Cut out section of 4- stroke Petrol Engine

Test Rig of 2- Stroke Petrol Engine

Test Rig of 4-Stroke Diesel Engine

Model of water-cooling system of 4- stroke Diesel Engine

Model of lubricating system of 4- stroke Diesel Engine

Test Rig to show valve timing diagram of 4 stoke IC Engine. Actual Cut Section

Model of Hydraulic Turbine

Model of Impulse steam turbine

All Geared Vertical Milling Machine

Surface Grinding Machine

Oil Hydraulic Circuit Trainer Unit

Cut Section Model of Centrifugal Pump

Cut Section Model of Centrifugal Pump

Rockwell cum Brinell Hardness Testing Machine

Simple Screw Jack

Single Purchase Crab with Weights

Double Purchase Crab with Weights

Combined inclined plane

Differential Wheel and Axle

Inverted Metallurgical Microscope

Belt Grinding / Polisher machine

Metallurgical Polishing Machine Double

Rockwell hardness Testing

Digital Brinell Hardness Testing Machine

Portable Dynamic Hardness Testing Machine

Impact Testing Machine

Analogue Cum Computerized –Universal Tensile Testing Machine

Furnace for Jominy Apparatus

Muffle Furnace with Microprocessor Controller

Dye Penetrant Indicator

Portable Ultrasonic Flaw Detectors

Magnetic Particle Testing Kit

Moisture Tester

Sieve Shaker 3D Electrically Operated

Electronic Weighing Scale

Sand Rammer Base Block with Compatibility Tester

Universal Sand Strength Testing Machine Hydraulic Type

Permeability Meter for Sand sample

INVERTER-BASED DC TIG AND DC PULSED TIG WELDING MACHINE

Heavy Vice

Bomb Calorimeter for determination of calorific value

Laboratory use Ball mill

Jaw Crusher

Optical Pyrometer

Thermocouple K-Type

Analytical Balance

Small Metal induction melting Furnace

Round Steel Rod 15mm Diameter of 0.4%C steel

Round Steel Rod 15mm Diameter of 0.8%C steel

Round Steel Rod 15mm Diameter of 1.20%C steel

Copper & its alloys sample set

Aluminium& its alloys sample set

Standard steel sample for metallographic laboratory purpose

Metallurgical Specimen Cutting Machine

Hook’s law Apparatus with Weights

Combined Inclined Plane and Friction Apparatus

Moment of Inertia of Flywheel Apparatus

Boyle’s Law Apparatus

Fortin’s Barometer with 500gm mercury

Cantilever with hook for load G Clamp 1meter length

Resistance Box (Plug Type)

Rheostat single tube, Sliding 1000 ohm, 0.3A

P.O. Box

PN Junction Diode Characteristics Apparatus

Linear Expansion Apparatus With 3 rods of different material

Photo Cell Characteristics Apparatus with Optical Bench

Conductivity Meter with electrode

Redwood Viscometer

Abel flash point

Arsenic Detection Apparatus

Digital pH Meter

Silver Electrode for pH Meter

Perform the direct load test on the three-phase squirrel cage induction motor

Conduct the No-load and Blocked-rotor tests on given 3-phase squirrel cage induction motor and determine the equivalent circuit parameters.

Conduct the direct load test to determine the efficiency and speed regulation for different loads on the given single phase induction motor; plot the efficiency and speed regulation curves with respect to the output power.

Conduct the test on load or no load to plot the ‘V’ curves and inverted ‘V’ curves (at no-load) of 3-phase synchronous motor

Dismantling and reassembling universal motor for mixer

Control the speed and reverse the direction of stepper motor

Control the speed and reverse the direction of the AC servo motor

Control the speed and reverse the direction of the DC servo motor

VERIFICATION OF KIRCHOFF’S LAW (FOR D.C. CIRCUIT)

VERIFICATION OF KIRCHOFF’S LAW (FOR D.C. CIRCUIT)

Use voltmeter, ammeter to determine current through the given branch of an electric network by applying mesh analysis

Use voltmeter, ammeter, wattmeter to determine active, reactive and apparent power consumed in given R-L-C series circuit

Use voltmeter, ammeter, wattmeter to determine active, reactive and apparent power consumed in given R-L-C parallel circuit

Use voltmeter, ammeter, wattmeter, p.f meter to determine line and phase quantities of voltage and current for balanced and unbalanced three phase star and delta connected load and calculate active, reactive, and apparent power

Use voltmeter, ammeter to determine current through the given branch and voltage across the given element of circuit by applying superposition theorem

Use voltmeter, ammeter to determine current through the given branch and voltage across the given element of circuit by applying superposition theorem.

Use voltmeter, ammeter to determine equivalent circuit parameter in a given circuit by applying Norton’s theorem

Use voltmeter, ammeter to determine load resistance for maximum power transfer for a given circuit by applying maximum power transfer theorem

Digital Storage oscilloscope

Digital Multi-meter

Compute the efficiency of a D.C. motor by Swinburne’s test

Control the speed of DC shunt motor above & below rated speed & draw the speed characteristics

Perform the brake test on DC series motor.

Study and check the connections (vector grouping) of three phase transformers

Compute the efficiency of a single-phase transformer by Back-to-Back test

Use of Op-Amp in amplifier, differentiator And Integrator circuit

Measure the output voltage of chopper for resistive load by varying the frequency and /or duty cycle of chopper

Effect on speed of given D.C. series motor by varying armature voltage using step down chopper.

Observe the effect on speed of the given D.C. separately excited motor by varying voltage using step down chopper

Control the speed of the given separately exited motor by changing the firing angle of SCR using single phase full converter and measure the speed

Control the speed of the given three phase induction motor by varying frequency and plot the graph between speed and frequency

Control the speed of the given synchronous motor drives using microcontroller

Control the speed of single- phase capacitor split phase induction motor using DIAC –TRIAC circuit

Control the speed of DC motor drives using microcontroller

Construct full-wave rectifier circuit & draw input, output waveforms – with filters and without filters.

Plot the characteristics of Zener diode and find the breakdown voltage.

Plot the input & output characteristics of a BJT in CE or CB mode

Plot the characteristics of JFET /MOSFET.

Construct Relaxation Oscillator using UJT and observe output waveform by CRO.

Construction of binary Asynchronous or Synchronous counter

Construction controlled shift register & verify SISO, SIPO, PISO, PIPO operation

Implementation of D/A converter and A/D converter using trainer kit.

Develop and execute Assembly language programs using Arithmetic Instructions and demonstrate outcome for a given input data. And Largest/smallest of given series of no. from Internal/External memory and demonstrate outcome for a given input data.

Develop and execute Assembly language program to interface LED with microcontroller

8086 microcontroller Trainer kit

Measure unknown inductance using Anderson bridge.

Use two watt-meters for measuring active power of three-phase balanced load.

Use voltmeter and ammeter method /Wheatstone bridge for measurement of medium resistance.

Use Megger for measurement of insulation resistance.

Use Kelvin’s double bridge for measurement of low resistance.

Determine the latching current and holding current using V-I characteristics of SCR.

Test the proper functioning of power electronic switches – SCR, IGBT, SCS and TRIAC

Test the proper functioning of DIAC to determine the break over voltage

Test the variation of R, C in R and RC triggering circuits and UJT on firing angle of SCR

Perform the operation of Class – A, B, C, D, E, F turn off circuits.

Use CRO to observe the output waveform of half wave-controlled rectifier with resistive load and determine the load voltage

Test the performance of given UPS.

Perform experiment to plot I-V characteristics of photovoltaic cell module and find out the solar cell parameters

Study different parts of a solar flat plate collector/ solar concentrating collector

Perform experiment to measure thermal performance of a solar water heating system

Identify & study different components of solar street lighting system for AC supply

Perform experiment to measure thermal performance of a solar cooker with varying reflector

Study on assembling of a micro hydro power plant.

Study on the different types of Boiler used in coal based thermal power plant

Experiment to compare power consumption of different types of TL with electromagnetic ballast, electronic ballast and LED lamps by direct measurements and estimate energy saving

Experiment to determine the reduction in power consumption in star mode operation of Induction motor compared to delta mode at different load conditions

Study of different types of fire extinguisher

Test HRC fuse by performing the load test.

Test MCB by performing the load test.

Dismantle MCCB/ELCB/ RCCB and identify various parts One unit of MCCB, One unit of ELCB, One unit of RCCB

Distance Relay Testing Kit / Impedance Relay kit

Testing of static Over current protection relay using Relay Testing Kit

Testing of Directional Over Current Relay (DOCR) by Relay Testing kit

Testing of percentage Differential Protection of Transformer Using Transformer Differential Relay (Electromagnetic/ Microprocessor based/ static).

Simulate differential protection scheme for transformer with power system simulation kit.

Demonstrate the operation of single phasing preventer by creating single phasing fault for a given 3-ph induction motor with D.O.L. starter

Simulate transmission line protection by using the impedance relay/over current relay for various faults. (On transmission line protection simulation Kit).

Study of different lightning arrester and identify different parts.

Study of ACB/VCB and identify different parts.

Demonstrate the improvement of p.f. using static condenser.

Prepare control circuit of twin fluorescent lamp.

Prepare control circuit of HPSV lamp.

Prepare control circuit of LED lamp.

Prepare light dimmer arrangement using the relevant dimmer type of transformer

Prepare light dimmer arrangement using solid state dimmer circuit.

Study of PIR and ultrasonic sensors.

Conduct illumination level assessment in workplace using lux meter

Measure the illumination output of different lamps (Incandescent, fluorescent, CFL, LED, HPSV, MH) andCalculate their luminous efficacy.

Interpret the polar curves of the given type of lamp and Plot the iso-lux contour of indoor lamps

Prepare series testing board for testing fan or other electrical gadgets.

Study and Identify cables (PVC, XLPE, and VIR) and catenary cable of different current ratings

Study of smart meter and associated system for commercial building/ complex

Experimental set up for load test and O.C. & S.C. test of three phase alternator

Check the functioning and testing of the isolation transformer

Check the functioning and testing of pulse transformer

Wattmeter Analog (Portable type)

Wattmeter Analog (Portable type)

Speed control of DC motor using chopper-Trainer kit

1-p half and full control rectifier R and series R-L load- trainer kit

Maxwell's inductance Bridge- kit

Vacuum cleaner

Dynamic braking of three phase squirrel cage induction motor using contactor control

Setup for run and test Traffic light Control with 8051 microcontroller kit and interfacing with PC. and also have

Setup for run and test Over voltage/under voltage and over current/under current relay

Operation of a stepper motor with a fixed no. of steps and to determine the angular

Setup for measurement of ac voltage, current, frequency and phase angle difference

Setup for run and test Speed Control of a D.C. motor and note speed vs. Load characteristics

Insulation Resistance Tester

SUSHAMA ELECTRONICS (BID ID -5406834)

ADVANCE INSTRUMENTS (BID ID -5396056)

UNITECH CORPORATION (BID ID -5409672)

DELTA TECHNOLOGIES (BID ID -5399659)

KALPANA SCIENTIFIC (BID ID -5403174)

ADVANCE INSTRUMENTS

DELTA TECHNOLOGIES

SUSHAMA ELECTRONICS

UNITECH CORPORATION