SPECIAL REPAIRS TO BLDG No 177 SHIVAJI STADIUM AND BLDG No GB 3 MARATHA HOUSE OF MLIRC BELGAUM UNDER GE BELGAUM

Amount

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings all as specified and as directed.

M&L for composite insulated double skin roofing / cladding with pre painted galvalume coated high tensile trapezoidal TRIMDEK profile steel sheets, in two layer of each 0.47mm thick (TCT), any colour, AZ-150 coating mass 550 mPa yield strength including provision of 50mm thick continous Rockwool insulation panel of density 40kg/cum fixed with self drilling fasteners/necessary sections including provision of edge covering as in moisture protection all as manufacturers instructions complete all as specified and as directed. Note: Measurement shall be taken flat as fixed without any allowance for laps etc.

S&F pre-painted galvanume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

M&L for preparation of old steel surfaces of any description, not otherwise described over 10 cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

Taking down cement plaster on brick or stone walls built in cement mortar.

M&L Rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surface on wall, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in two layers, first coat 10 mm thick in CM 1:6 and second coat 5 mm thick in CM 1:4 using water proofing compound @ 3% by weight of cement) all as specified and directed. Note: WPC shall be added in both the layers of plastering and will be measured and paid separately as supply only under respective item of BOQ.

Supply only water proofing compound

M&L for preparing newly plastered wall surfaces and applying two coats of anti fungal paint (weather coat, Apex Ultima of Asian paint or equivalent in Berger, Jenson & Nicholson, Nerolac) over a coate of primer complete all as specified and directed.

M&L for complete removal of existing treatment on old walls and applying two coats of anti fungal paint (weather coat, Apex Ultima of Asian paint or equivalent in Berger, Jenson & Nicholson, Nerolac) over a coate of primer complete all as specified and directed.

M&L for preparing newly plastered on wall surfaces and applying two coats of acrylic emulsion distemper/oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for complete removal of existing treatment on wall with wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots and applying two coats of acrylic emulsion distemper/oil bound distemper on internal wall surfaces on 2.5mm thick wall care putty & after preparation priming plastered and other surfaces with alkali resistant primer.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.0 kg of cement per sqm

M&L for plain Cement concrete 1:2:4 type B-1 (20mm graded aggregate) 25 mm thick as in sub base of floors all as specified and directed.

M&L for screed bed or bedding layers of cement mortar 1:6, 15 mm thick for laying floor finishes all as specified and directed.

M&L for machine cut Kota stone slab flooring of minimum size 560-600x560-600x18-20 mm thick, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, complete all as specified and as directed.

M&L for 18-20mm thick machine cut Kota stone slab as in skirting and jointed with gyey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L for granite slab jet black 18-20 mm thick factory polished fixed with cement mortar and pointed with coloured pigment to match the surface for floor etc including cutting to shape, grinding, polishing all as specified and directed.

M&L for granite slab jet black 18-20 mm thick factory polished fixed with cement mortar and pointed with coloured pigment to match the surface for skirting/dado etc including cutting to shape, grinding, polishing bulnosing all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for non skid digital coloured ceramic tiles edge cut min size 600x600x9 to 10 mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tile complete all as specified and directed.

M&L for non skid digital coloured ceramic tiles edge cut min size 300x300x7 to 8 mm thick and above size as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tile complete all as specified and directed.

Dismantling of boarding of any description fixed in any position with nails.

M&L for 4mm thick Aluminium Composite Panel comprising of a core containing not less than 70% non combustible mineral filling sandwiched between two skins of 0.5mm thick aluminium alloy PERALUMAN-100 (AlMg1-NS41), weight not less than 7.6 kg per sqm, complete with all necessary sub-structures, anchors, hardware and fittings to provide a total installation, fixed to existing wooden/ steel members all as per manufacturers instructions, fixed in repairs, all as specified and as directed. Note: Measurement shall be taken flat as fixed without any allowance for laps, etc. Make: Alstrong/ Aludecor/ Alucobond

Fixing only boards obtained from item No. 23 above and making good matching with existing surfaces.

Taking down chowkhats or frames (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified

S&F powder coated aluminium frame/shutter for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each

M&L for flush shutter 30 mm, solid core construction, with particle board core and ply wood face panels, commercial type on both sides complete.

S&F aluminium anodized fabricated type door handle 150mm in size.

S&F MS butt hinges medium weight cold rolled size 100 mm

S&F 300 mm aluminium alloy, anodised, sliding door bolt with hasp & staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt 150 mm size

M&L for preparation of new wooden surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Dismantling single layer Mangalore pattern roofing tiles.

Dismantling timber scantling 40 Sqcm and over in section, in any position for unframed work all as directed.

M&L for second class hardwood in scantlings clean sawn timber complete all as specified and as directed.

Fixing only wooden scantling obtained from SI item No. 36 above.

Dismantling of fillets, rails, posts, rafters, purlins, etc. under 40 sq cm in section un framed works.

M&L Second class hard wood plain fillets, rectangular in section, wrought secured with screw, sectional area exceeding 13 and not exceeding 25 Sqcm all as specified and directed

Fixing only fillets obtained from SI item No 39 above.

M&L for Cement Concrete rustic red colour tiles of size 420x330mm in roofing interlocking at side joints laid dry all as specified and directed. Make : Pionnier or Indograce

M&L for Cement Concrete rustic red colour ridge cap of size 330x 207/249 mm (thickness 15mm), bedded and jointed in CM 1:6 Complete all as specified and directed. Make : Pionnier or Indograce

M&L for Cement Concrete rustic red colour Hip Starter of size 360x 210 mm (thickness 17mm) bedded and jointed in CM 1:6 Complete all as specified and directed. Make : Pionnier or Indograce

M&L for providing cement concrete 1:3:6 type C1 (using 20mm graded aggregate) in coping/bed plates eves filling in roof including necessary form work all as specified and directed.

M&L for Cement Concrete rusted red/red colour three way cap of size 351x160x429 mm (thickness 15mm), bedded and jointed in CM 1:6 complete all as specified and directed. Make : Pionnier or Indograce

S&F 8mm thick chrome finished tempered/toughened glass corner shower enclosure with two fixed glass and openable door fixed on the side panel 3 part (approx dimensions 1.95m (ht) and 1.4+1.7=3.1m (width) (for each bath room) with all connected assories like floor door machine, rubber gasket, fixing clips, screws/bolts, handles, stopers, hinges etc as shown in Catalogue No 1840-L/1140-l of Jaquar (Code JSE-CHR-840L2832H19X), or equivalent model in Saint Gobian, Kohler

Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with 2 coats of creosote oil.

S&F 0.8mm thick, plain galvanised mild steel sheeting with grade of zinc coating 275 gm/sqm, as in ridges, hips, valley gutter, drip and straight flashings at expansion joints, or for similar nauture of applications etc all as specified and directed and including dismantling plain or corrugated steel sheeting, any gauge, thickness in roof coverings all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 210-0 gde E-165

Taking down eaves gutter pipes, rain water pipes (of any size and pattern) including fitting, head shoes, bends, swan neck etc.

S&F PVC (SWR) eaves gutter Half Square/half rounded 150mm dia complete all as specified and directed.

S&F PVC (SWR) pipes 110mm dia, single socketed in any length fixed to walls & jointed with solvent cement complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius provided with access door 110mm bore complete all as specified and directed..

S&F aluminium composit pannel board 3mm thick fixed over existing wooden/steel frames with necessory frame work with screwing and scaffolding including dismantling etc complete.

Dismantling wall or ceiling boards or insulation boards/ slabs any thickness including cover fillets

S&F suspended false ceiling system with 16mm thick mineral fibre acoustical MINA TUFF EDGE TILES (MIRO LOCK), white, fibre performance Class-I (BS 456, Part 6&7), with bio coating on the exposed face of tiles, module size 600x600mm, laid on 15mm thick SILHOUTTE EXPOSED GRID system, with minium load carrying capacity of 11.68 Kg/Sqm, white/black colour all as specified and directed.

M&L for preparation of old treated surfaces of any description, over 10 cm in width or girth and applying filler coat of wood filler liquid transparent, staining oil and two coat of varnishing complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surface on wall, finished even and smooth without using extra cement.

M&L for preparation of new plastered surface of wall and apply two coats of acrylic emulsion distemper over a coat of alkali resistant primer over two layers of wall care putty of total thickness 2.5 mm, comprising 1st layer 1.5mm & 2nd layer 1.00mm, all as specified and directed.

Taking down carefully aluminum/copper point wiring complete for light, fan, 5 A socket, 15 Amps socket, 2 way points and bell point etc in any type of wiring with boards, holders and any type of electrical fittings etc complete & making good to disturbed area, complete all as specified and as directed.

M&L for point wiring 1.5 Sqmm single core PVC insulated FRLS unsheathed 1100 Volts grade copper conductor multi-stranded cables drawn through existing non-metallic rigid PVC conduits and conduit accessories or PVC casing capping of suitable size with all necessary fittings and provision of one run of PVC insulated FRLS unsheathed 1100 Volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size of modular GI box flush mounted with walls, including white colour cover plates for mounting modular type switches, sockets, fan regulators, bell pushes etc. for one light point controlled by one switch 1 way complete one light point controled by one 1 way switch, all as specified and as directed.

All as described in item No. 63 but for one fan point controlled by one switch and regulator.

All as described in item No. 63 but for one 05 Amps socket outlet on independent board.

All as described in item No. 63 but for one 05 Amps socket outlet on the same board with other switches.

All as per item No. 63 above, but wiring with 2.5 Sqmm PVC insulated unsheathed cable copper conductor multi stranded (for 15 Amps power socket) with one run of copper conductor PVC insulated multi-stranded cable 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly, complete all as specified and as directed.

M&L for sub main wiring with 2 runs of 6 Sqmm single core FRLS, PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn through in and including 25mm dia PVC conduit of medium grade and conduit accessories of suitable size fixed on walls / roofs / floors etc with provision of one run of 6 Sqmm HRFR, PVC insulated unsheathed cable with multistranded copper conductor as earth continuity., including dismantling old sub main wiring and making good disturbed surfaces complete all as specified and as directed. Note: Three runs of 6 sq.mm copper cable and one run of PVC conduit and required conduit accessories shall be measured as one unit length.

S&F modular switch piano type 6 Amps flush button 230 Volts AC one way, complete all as specified and as directed. Make: Legrand, Schneider, ABB, Siemens, L&T

S&F modular switch piano type 16 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make: Legrand, Schneider, ABB, Siemens, L&T

S&F modular socket outlet 6 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified and as directed. Make: Legrand, Schneider, ABB, Siemens, L&T

S&F modular socket outlet 6/16 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified. Make: Legrand, Schneider, ABB, Siemens, L&T

S&F modular fan regulator electronic step type 2 module suitable for 1200/1400 mm sweep ceiling fan complete as specified. Make: Legrand, Schneider, ABB, Siemens, L&T

S&F in repairs ceiling rose 3 terminal suitable for 230 volts AC supply, complete all as specified and as directed.

S&F (on 2 Nos PVC round boxes) LED tube light fitting 1x20 W, 230 V including LED tube rod T8 1200 mm alongwith LED tube having system efficacy of 2100Lm and CCT-6500k, THD must be <15%, housing made of CRCA, LED life hours should not be less than 25k hours as per LM80 report, BIS mark is mandatory, supplier has to provide LM79/80 report, connecting upwith PVC copper conductor from ceiling rose complete all as specified and directed. Make: Philips Cat No. TMC 501 P 1xT LED 22W P 3241 & 20 W 865 T8 IND I, or equivalent in CG, Bajaj, Wipro

S&F LED tube light batten 1x10 W, 230 V, 600 mm having system efficacy of 1200Lm and CCT-6500k, THD must be <15%, housing made of CRCA, LED life hours should not be less than 25k hours as per LM80 report, BIS mark is mandatory, supplier has to provide LM79/80 report, connecting upwith PVC copper conductor from ceiling rose complete all as specified and directed. Make: Philips Cat No. BN 021 LED10S- 6500 PSU GR S1 or equivalent in CG, Bajaj, Wipro

S&F 2'x2' recess mounted full glow LED luminaire with white powder coated housing acting as heat sink and frame in CRCA sheet, high efficiency LED grade diffuser, in built electronic driver duly wired up to terminal block, power consumption < 30W, luminaire lumen > 3500 lm and system efficiency >120lm/W, CRI>80, LED Make:- Nichia/ Cree/ Osram/ Lumiled only with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC62471 & electrical insulation class 1, colour temp 6500K, Ingress protection IP 20, driver efficiency >85%, 50,000 burning hours (min) as per L70 criteria, ambient temp 0 to 50 degree centigrade, power factor >0.95, THD < 10%, surge protection 3 kV, two stages isolated constant current operated driver with voltage range 120-270V AC and safety extra low Voltage safe level <60V DC as per IEC standard, with LM79 & LM80 certification. Make:- Philips Model No. RC380B LED36S-6500 G5 L60 W60 PSU OD or equivalent model of CG, Wipro, Bajaj.

S&F in repairs and replacement of 10-12W Surface mounted downlight with white powder coated polycarbonate housing and pressure die-cast heat sink having high efficiency. Make: Philips Model No. SM250C LED12S- 6500 PSU WH or equivalent model of CG, Wipro, Bajaj.

S&F 20 W high efficient LED Street light fixture (as security light) with aluminium pressure die cast housing for long life, system efficiency ≥120 lm/W, system Lumens 3000 lm, high purity polycarbonate/glass diffuser, with silicon gaskets for IP65 protection, IK07, in built electronic driver with 4 kV surge protection has features of constant current with low/over Voltage protection with phase to phase 440 V protection for 8 Hrs, duly wired up to terminal block, surge protection in 4 kV, driver efficiency >88%, power factor > 0.95, THD <10% LED Make : Nichia/ Cree/ Osram/ Lumiled, colour rendering index CRI >70, temp range 0 to 45 degree centigrade, CCT 5700k-6500K, LED life 50000 burning hrs (min) as per L70 B50, photo biological safety report as per IEC 62471 & electrical insulation class 1, Voltage range 110-270 V AC and safety on low Voltage/high Voltage. LM79 & LM 80 certification. BIS R No. is mandatory for LED light fixtures/drivers and fixture shall be fitted to GI bracket 40 mm dia, light grade, min 1.5 m length, bent to shape required as per site and quoted rate is deemed to be included pron of GI pipe with brackets, nuts and bolts. Make:- Philips model No. BRP042 LED 19 CW MR S1 PSU GR or equivalent model of Wipro, Bajaj, CG

S&F in repairs Celing fan 1200 mm sweep alongwith all accessories and 3 blades, energy saving, suitable copper conductor cable from connector to terminal, including taking down existing un serviceable ceiling fan from the location and setting aside for fixing/ depositing to MES E/M store yard. Make: Havells Model No. ES-50 or Crompton/ Orient/Bajaj

S&F in repairs exhaust fan, 300mm sweep, 230 Volts, single phase, plastic body with fixing arrangements with necessary grouting and fixing arrangements including making suitable size of hole in existing wall and necessary grouting on it with fixing bolts and provision of 3 core flexible copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan, including making good distubed surfaces all as specified as directed. Make: Havells Model - Ventil Air DX or eqvt in Crompton,Phillips.

S&F in repairs MCB DB TPN 4 way with, 415 V, double door type and including 2nd class hard wooden board 4cm depth with sunmica top of suitable size to fix the MCB DB, complete all as specified and as directed. Make: Legrand, Schneider, ABB, Siemens, L&T.

S&F in repairs Sheet metal enclosure MCB DB SPN 12 way with 100 Amps rated bus bar double door type and including 2nd class hard wooden board 4cm depth with sunmica top of suitable size to fix the MCB DB, complete all as specified and as directed. Make: Legrand, Schneider, ABB, Siemens, L&T.

S&F in repairs MCB TPN 415 Volt of capacity 63 Amps‘C’ series, complete all as specified and as directed. Make: Legrand, Schneider, ABB, Siemens, L&T.

S&F in repairs MCB DP 63 A 10 kA C series 50 HZ AC supply including dismantling old one, complete all as specified and as directed. Make: Legrand, Schneider, ABB, Siemens, L&T.

S&F in repairs MCB SP 240 Volt of capacity 5 to 32 Amps‘C’ series, complete all as specified and as directed. Make: Legrand, Schneider, ABB, Siemens, L&T

M&L for electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook complete, and testing of Earth resistance all as specified and as directed.

Supply and laying, joining and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 25 sqmm 4 core laid in trenches, ducts, pipes or on wall with saddles all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep and getting out in any type of soil complete all as specified and as directed.

M&L for Double wall corrugated HDPE pipes of ISI marked 63 mm outer dia as in cable protection fixed to poles/ walls with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc. all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Supply, laying, GI pipe light grade, 40mm bore for mechanical protection of cable complete all as specified and directed.

S&F 25 mm dia unplasticised PVC pipes (UPVC) of pipes pressure rating 10 kgf/sqcm laid in trenches or fixed to walls, ceiling or in floors complete with connecting accessories all as specified and directed.

S&F 25mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed as in repairs.

S&F in repairs ISI marked rotational moulded polyethylene water storage tank of capacity 500 ltrs (cylindrical, vertical with closed top) hoisted and fixed in position and including taking down existing unserviceable water tank complete all as specified & directed.

S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipes & fixed of size 25 mm.

ASHIRWAD ELECTRICALS

DHANSHRI ENTERPRISES

M/S SANJAY B SHARMA