Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.6 LAccepted-AOC VILL P O MANKAR DIST BARDHAMAN PIN 713144 | MANKAR | BARDHAMAN | WEST BENGAL | 713144 | L1 | Accepted-AOC Lowest rate quoted | |
| 2 | L2₹43.6 L+₹1.1 L (2.54%)Rejected-Finance PO BUD BUD DIST BURDWAN WEST BENGAL PIN 713 403 | BUD BUD | BURDWAN | WEST BENGAL | 713403 | L2 | Rejected-Finance Higher rate quoted than L1 | |
| 3 | L3₹43.7 L+₹1.1 L (2.64%)Rejected-Finance | L3 | Rejected-Finance Higher rate quoted than L1 | |
| 4 | L4₹44.0 L+₹1.4 L (3.35%)Rejected-Finance | L4 | Rejected-Finance Higher rate quoted than L1 |
Tender Value
₹49.7 L
EMD Value
₹99,500
Closing Date
4 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2022_MES_549943_1
8400-852/E8
Open Tender
Civil Works
Works
210 days
PANAGARH
Class D and Category a (i) (Building)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹99,500
Yes
9 Dec 2022
5 Sept 2022
6 Oct 2022
5 Sept 2022
4 Oct 2022
19 Sept 2022
Amount
Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
M&L for hardcore of broken stone of gauge n.exc. 63mm, deposited, spread and leveliled in layers n.exc. 150mm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for PCC type D2, 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.
M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.
M&L for rendering 15mm thick in CM (1:4) using liquid water proofing compound as per manufacturer instruction on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: WPC shall be measured and paid seperately)
M&L for preparation of new surfaces of wall priming with alkali resistant primer and applying two coats of cement based paint complete all as specified and directed.
Supply only chain link MS galvanised fancing of mesh size 75x75 mm with min dia of wire 3.5 mm of weight per square metre Not exc 4 kg , complete all as specified and directed by Engr-in-Charge. (Note : Fixing of chain link fence will e measured and paid separately).
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. Note : Chain link fencing will be paid separately.
S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed
S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc complete all as specified and directed.
S&F 1.25mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed
M&L for two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces incl preparation of surfaces over 10 cm width or girth complete all as specified and directed.
M&L for two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces incl preparation of surfaces n.exc 10 cm width or girth complete all as specified and directed.
Returning, filling in and including spreading, leveling, watering & well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed.
Removing of excavated materials to a distance n. exc 50m and depositing where directed at a level n.exc 1.5m above the starting point in oft/loose soil complete all as specified.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing to low lying area and rubbish off the premises complete all as specified and directed.
Demolition of cement concrete (un- reinforced) n.exc 15 cm thickness (above or below ground level) and removing rubbish off from the premises complete all as specified and directed.
M&L for reinforced cement concrete (Desing Mix, M-25) (using 20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed
M&L for reinforced cement concrete (Desing Mix, M-25) (using 20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finihed surfaces complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams for rough finished surfaces etc complete all as specified and directed.
S&F Mild Steel TMT bars 8mm and over, cut to lenghth, bent to shape requird, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clip all as directed by Engineer in Charge.
All as per item No 22.00 mentioned here-in-above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
M&L for brick work with flyash bricks straight or corve on plan to any radius in half bricks thick walls, built in cement mortar (1:4) complete all as specified and directed.
M&L for rendering 10 mm thick cement plaster in cement mortar (1:6) on brick work or concrete surfaces including finished even and smoothh without usig extra cement complete all as specified and directed
M&L for rendering 15 mm thick cement plaster in cement mortar (1:4) on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying a layer of wall care putty and two coat of oil bound distemper complete all as specified and directed.
M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)
M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM (1:4) complete all as specified and directed.
S&F anodised aluminium powder coating (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed
S&F anodised aluminium powder coating of any colour (thickness or powder coating not less than 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed
S&F sliding window shutter, Aluminium standard section 39.40 x 17.70 x 2mm (WS-4699) as in side of shutter, 39.40 x 17.70 x 2mm (WS-4698) as in shutter interlocking, 39.40 x 17.70 x 2mm (WS -4697) as in top and bottom, not divided into panels, including locking arrangement, necessary joining cleats, glazing clips, rubber packing anodized aluminium holdings and screws etc suitable for single glass, including powder coating(minimum thickness of powder coating 50 micron) complete all as speccified and directed. (Note : Glass or wiremesh shall be paid separately)
M&L for 5.5mm thick plain sheet glass ordinary quality & glazing with oil putty exc 0.50 Sqm in each pane complete all as specified and directed by Engr-In-Charge .
M&L for 12mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations, fixed to aluminium frame work complete all as specified and directed.
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and directed
Excavating in post holes not exc 0.5 cum, in soft soil and getting out , returning , filling in and ramming earth in layers not exc 25 cm, watering and removing surplus soil to a distance n.exc 50 m and making good surfaces complete all as specified and directed.
S&F mild steel work as in Post, framed roof trusses, purlins, rails, MS plate and fristing incl distances pieces, cleats, MS plate etc conforming to Fe 410 - O or Fe 310 - O complete all as specified and directed.
S&F 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for 100mm thick plain cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.
M&L for 75mm thcik plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in floor complete all as specified and directed.
M&L for rendering 15 mm thick in CM (1:6) using liquid waterproofing compound as per manufacturer instruction on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: WPC shall me measured and paid seperately)
M&L for preparation of new surfaces of wall and applying three coats of white wash complete all as specified and directed.
M&L for reinforced Cement Concrete (Design Mix, M-25) (using 20mm graded stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for reinforced cement Concrete (Design Mix, M-25) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed
M&L for reinforced Cement Concrete (Design Mix, M-25) as in Chajja complete all as specified and directed
Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and directed
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; n.exc 200mm thick (Horizontal or sloping) complete all as specified and directed
Form work to chajja and similar work including edges ffor rough finished surfaces complete all as specified and directed
M&L for framed work such as grills etc with endsof bars shouldered nd or riveed or forged into spike, framed guard bars and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.
M&L for 3mm thick plain sheet glass ordinary quality & glazing with oil putty n.exc 0.50 Sqm in each pane complete all as specified and directed by Engr-In-Charge complete all as specified and directed.
M&L for chowkhat 2nd class hard wood and frames wrought , framed rebated on the solid rounded or chamfered, put together with gluepinned at joints complete all as specified and directed by Engr-In-Charge.
S&F 35mm thick 2nd class hardwood, factory made plain framed, panelled shutters (two panel), with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-In-Charge.
S&F stainless steel sliding door bolts 250mm long, plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and two on staple plate and fixed complete all as specified and directed by Engr-In-Charge .
S&F 100mm butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed
S&F 200mm stainless steel barrel tower bolts with bright bolt complete all as specified and directed.
S&F 125mm stainless steel handle complete all as specified and directed
S&F 2nd class Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n.exc 200 Cucm each complete all as specified and directed by Engr-in-Charge
S&F mild steel flat iron 25x6mm as in hold fasts including all necessary cutting etc complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in bed block for fixing of hold fasts etc complete all as specified and directed
M&L for painting on new wooden based surfaces of any description not other wise described over 10cm width or girth applying two coat synthetic enamel paint over one coat of pink primer including preparation of surfaces complete all as specified and directed by Engr-In-Charge .
M&L for 100mm thick cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in sub base floor complete all as specified and directed
Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed
M&L for 40 mm thick damp proof course in cement concrete type B-0, 1:2:4 to horizontal or vertical surfaces including necessary formwork complete all as specified and directed
M&L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5mm thick cement plaster in cement morar (1:3) on concret surfaces as in ceiling, chajja, shelves etc to match with existing surfaces including finishing even and smooth without using extra cement complete all as specified and directed
M&L for prepration of new surfaces of ceiling applying three coat of white wash complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and as directed. (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
M&L for PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in padding on roof, finished fair and even without using extra cement complete all as specified and directed.
M&L for rendering 10mm thick on fair faces on roof surfaces of concrete in Cement Mortar (1:4) finished even and smooth without using extra cement and WPC complete all as specified and directed.
M&L for preparation of new surfaces of roof and applying two coats of Polyurethane(PU) accrylic based waaterr proofing liquied compound over and including one coat of self priming primer @ one litre per 10 sqm with reiforcing fabricc sheet as per manufacturer's instructions to stop leakage/seepage from roof/wall complete all as specified and as directed by the Engr-in-Charge. (Note : (i) As per description of this item, minimum two cots of Polyurethane (PU) acrylic based wate proofing liquid compound over one coat of primer shall be carried out as per manufacturer's instruction. Please note no price adjustment shall be made, if as per manufacturer's instrucions more coats of Polyerethane (PU) acrylic based waterr proofing liquid compound and primer are required for roof treatment. (ii) Quoted rate shall be included for work in building/struture of any height. (iii) To be applied by authorised applicator).
M&L for 75mm thick Cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) as in plinth protection/path/ pavement complete all as specified and directed.
Moorum/red bajri filling in floors or in foundation, laid in layers n.exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed
M&L for 50mm thick plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in floor finished even and smooth without using extra cement complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block with grey cement and no pigmenetany shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.
M&L for plain cement concrete type B0, 1:2:4 (using 12.5mm graded stone aggregate) as in kerb, coping complete all as specified and directed
M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and directed.
S&F steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, including making good disturbed surfaces as per existing specfication complete all as specified and directed.
M&L for non-skid ceramic Coloured tiles 7 to 8 mm thick (square/rectangular) narea of each tile exceeding 0.11 sqm but n.exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry over and including screed bed or bedding layer of 15 mm thick with cement mortar (1:6) and pointed in white or coloured cement to match complete all as specified and directed.
M&L for glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 10mm thick rendering in cement mortar (1:4) complete all as speciified and directed.
M&L for machine cut kota stone slab flooring 20-25mm thick over and including 20mm cement screed base of CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick backing coat in CM (1:3) cement screed and jointed with grey slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
S&F vitreous china wash basin, white, flat back, size, 550X400mm including bracket for fixing 32 mm waste coupling, waste pipe etc complete all as specifid and direted.
S&F in repair Pillar taps, 15mm bore, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT or COLD' with long scrwed shanks and fly-nuts, screwed for iron pipe or for connection pipe complete all as specified and directed.
S&F 15 mm dia bore steel tubing medium grade galvanised with all fittings and connection fixed to wall/ceiling complete all as specified and directed.
S&F stop valve of 15mm bore , chromium plated with long shank and cup concealed type cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed.
M&L for setting coat of 3mm thick of CM (1:2), trowelled to even and smooth finish over rendering 10mm thick in CM (1:4) on fair faces of brick work finished surface even & smooth complete all as specified and directed.
M&L for providing 40mm thick PCC 1:2:4 Type B0 (using 12.5 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth without using extra cement complete all as specified and directed.
M&L for 1st quality joints free non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles exc. 0.06 sqm but n. exc 0.11 sqm of approved colour as in floors etc set and joined in neat cement slurry over and including 15mm thick sreed bed of cement mortar (1:6) complete all as specified and directed by Engr-in-Charge.
M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
S&F mild steel work as in post, framed roof trusses, purlins, rails and fristing incl distances pieces, cleats etc conforming to Fe 410 -O or Fe 310 - O complete all as specified and directed.
S&F mild steel plate plain, cut to shape forming holes and welded to truss and verticle post all as required complete all as specified and directed.
M&L for plain Cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) in surface channels and drains complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge.
M&L for 25 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete all as specified and directed.
S&F 25 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as specified and directed.
S&F 50 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.
S&F 1000 ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top with three layered) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engineer in Charge. (Make: Sintex/vectus/Prayag)
S&F high pressure PTMT float valve with epoxy coated alluminium rod and high density polythelene ball screwed for iron pipe 25 mm dia with fly nut complete all as specified and directed.
E/M PORTIONS M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
All as per item No 99.00 mentioned here-in-above but One 3 pin 5 Amps socket out let points on independent board complete all as specified and directed
All as per item No 99.00 mentioned here-in-above but 5 Amp socket on same board with other switches complete all as specified and directed.
M&L for wiring for socket out let on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor, PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified.
S&F switch socket combination 2 in 1 multipurpose 5 pin, (6 Amps) flush type controlled by one switch complete all as specified.
S&F socket outlets 2 in 1, 3 pin, 5/6 Amps flush type 230/240 V complete all as specified and directed .( For Same Board only)
S&F switch socket combination 5 in 1 , 6 pin , (5/16 Amps) flush type controlled by one switch complete all as specified.
S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.
S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified .
S&F building security light fittings 25 watts, minimumm system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.
S&F 18 W LED light fitting wall mounted batten 4'ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection complete all as specified and directed.
S&F epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.
S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note :Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)
S&F MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)
M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth wire electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments, 20 dia bore GI pipe 'medium grade' as water pipe from earth chamber to upper edge of earth plate, Test point, GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. (Note :- (i) If the desired earth resistance less than 50 Ohms is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the eath testing register, prepared and to be maintained by the contractor & submited to Concerned JE E/M. (iii) T&P and testing instrument (Meger) to be provided by the contractor at own cost).
S&F ceiling fan 1200mm size, star 5 rated, ISI mark, 240V, 50 Hz complete all as specified and directed.
S&F metal type ventilating exhaust fan 300 mm sweep 230 volt AC complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size all as directed.
Supply, laying / fixing / connecting, testing and commissioning of 10 Sqmm x 2 core LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor, 1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of cross sectional area including cable glands, lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) all as directed by the Engr-in-Charge. (Note: Excavation,sand cushioning,brick will be measured and paid separtely).
M&L for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . (Note : Punned thickness 18 cm shall only be considered for payment)
Supply and lay in trenches fly ash bricks, for cable protection all as specified and directed by the Engr-in-Charge.
S&F pipe galvanised, 50mm bore 'Light Grade', including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement complete all as specified and directed.
ROY ENTERPRISE
M/s RAJEN ROY
KAZI SAHABUL ALAM
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .