REPAIR REPLACEMENT OF ALUMINIUM DOORS PARTITION WOODEN DOORS WINDOWS VENTILATORS ETC UNDER AOR OF AGE BR DETT III OF GE 862 EWS

Amount

Taking down chowkhats or frames (without taking off shutters from the frames) n.exc 1.5 Sqm each and removing from site, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm and not exceeding 4.0 Sqm each removing form site, complete all as specified and directed.

Taking down shutter of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm, complete all as specified and directed.

Taking down wood shutters size n exc 2.00 Sqm each and refixing in the same opening after carry out any repair required, complete all as specified and directed. Note: (a) Supply only parts replaced will be measured and paid separately. (b) The new doors will be fixed within 3 days after removal/ taking down.

Taking down aluminium shutters size n exc 2.00 Sqm each and refixing in the same opening after carry out any repair required, complete all as specified and directed. Note: (a) Supply only parts replaced will be measured and paid separately. (b) The new doors will be fixed within 3 days after removal/ taking down.

S&F for factory made 2nd class hard wood 35 mm thick plain framed panelled shutters (any numbers of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with commercial face veneers, complete all as specified and directed.

S&F for factory made 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed

S&F for factory made 35 mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and directed.

S&F for factory made solid panel PVC moulded door shutter 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in the frame at site as per specification & drawing mentioned in SSR Part-II 2020, complete all as specified and directed.

M&L for powder coating of any colour (thickness of powder coating not less than 50 micron and minimum thickness of aluminium 2mm) anodised aluminium frame for doors, windows, ventilators and shelters of sizes as directed by Engr-in-Charge with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

M&L for Powder coated anodised aluminium window and ventilator shutters of any colour, (minimum thickness of powder coating not less than 50 micron & minimum thickness of aluminium 2mm) side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21 100mm long (3 No) suitable handle (2 No), complete all as specified and directed

S&F for aluminium anodized grills 7-8mm dia decorative type 75mm mesh size, complete all as specified and directed.

M&L for factory made 100% solid WPC door frame 90mm x 45mm single rebated made from wood polymer composite (single extruded process) material comparising of vigin PVC polymer of K value 57-60 (suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 kg/cbm & manufactured by "RAJSHRI" an certified by ISO 9001-2015, having good screw holding capacity (screw withdrawel strength of min 990N), min compressive strength of 58N/Sqmm, modulus of elasticity 900 N/Sqmm and resistance to spread of flame of class A category with property of being termite /borer proof, water /moisture proof & fire retardant & fixed in position with SS dash fastener / hold fast of required dia and length, all as per specification, drawing and as directed. Note: Material test certificate and authentication should be compusory provided by the manufacturing company, complete all as specified and directed.

M&L for factory made of 30mm thick 100% solid WPC laminated moduled door shutter comparising of vigin PVC resin of K value 57-60 (suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives made from extrusion process WPC foam sheet single extrauded (inner) with having minimum frame density not less than 650 kg/cbm & manufactured by "RAJSHRI" an certified by ISO 9001-2015, having good screw holding capacity (screw withdrawel strength of min 2000N) (Face) & 1100 N (Edge), min compressive strength of 50N/Sqmm, modulus of elasticity 850 N/Sqmm and resistance to spread of flame of class A category with property of being termite /borer proof, water /moisture proof & fire retardant. WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted on both faces of shutter and fixing stainless steel butt hings of required size with necessary full body threaded star headed counter sunk SS screwes, all as per specification, drawing and as directed . Note: Material test certificate and authentication should be compusory provided by the manufacturing company, complete all as specified and directed.

S&F factory made uPVC white colour three track three panels sliding window with fly proof SS wire mess (two Nos glazed & one No mesh panel) upto 1.50m height made of (big series) frame 116 x 45mm & sash 46 x 62mm both vaing wall thickness of 2.3 + 0.2mm and single glazing bead/ doubleglazing bear of appropriate dimension. (Area of window above 1.75sqm) comprising of uPVC multi chambered frame, with inbuild roller track and sash extruded profiles duly reinforced with 1.60 + 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropirate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook zinc alloy body with sinle nylon rollers (weight bearing capacity to be 40kg), GI fasteners 100x8mm size for fixing frame to finished wall and necesary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing dardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engr-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimensoin i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in hgiher side shall be accepted but no extra payment on this account shall be made.

S&F for sheet glass 5.5 mm thick, ordinary quality and fixed with aluminum door windows & parition n exc 0.5 sqm in each pane, complete all as specified and directed.

S& F for Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F 100mm long butt hinges stainless steel, medium weight (ISI Marked) cold rolled, complete all as specified and directed.

S&F in repair for door closer hydraulically regulated, aluminium (extruded section body) designation No 2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 Kg (ISI Marked), complete all as specified and directed.

S&F for extruded aluminium alloy American handles, size 200 mm fabricated type anodised (ISI marked), complete all as specified and directed.

M&L for 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choce fixed to aluminium door or similar work, complete all as specified and directed.

S&F for plain ACP board 12mm thick, fixed in aluminium door or similar works joinery including cutting, packing, finishing, complete all as specified and directed.

M&L in repair for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe310-0, complete all as specified and directed.

S&F for 75 mm size mortice lock of brass, vertical type, 4 levers, complete all as specified and directed.

S&F in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, (ISI marked), complete all as specified and directed.

S&F for 250 mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type), and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy (ISI Marked), complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 150 mm long of extruded section (ISI marked) ,complete all as specified and directed.

S&F in repair 140mm long floor door stopper of brass body and tongue with hard drawn steel spring, complete all as specified.

S&F for 3 mm thick figured glass pin headed type and glazing with oil putty in squares n . exc 0.50 sqm in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description from wooden or steel frames glazed with putty/beads complete all as specified and directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width or grid and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for preparation of old wood and wooden based surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation new of previously untreated steel or iron surface or roof sheet or windows of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer, complete all as specified and directed.

M&L for preparation old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L in repair for 18 / 19mm thick prelaminated particle board, cupboard, kitchen cabinat shutter etc, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work, complete all as specified and directed.

S&F in repair for stainless steel curtain rod 20mm dia, complete all as specified and directed.

S&F in repair for stainless steel 'T' and 'L' type brackets with finials for curtain rod of 20mm dia, complete all as specified and directed.

M&L for repair in wood/ aluminium door bottom sealing strip guard with double sided insulation for doors of length n exc 1.2m, which are equally able to keep wind, dust and sound or poluted air out side of door (i.e. Anti Lizard strip) fixed to aluminium or panel door, complete all as specified and directed.

Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.

Description all as per srl item No. 40 above but except bricks NOTE: Old brick retrieved from demolition shall be used.

Taking down cement or cement line plaster, any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick or concrete work, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whitening, complete all as specified and directed.

Dismantling of wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/ slabs blankets, any thickness, including cover fillets, complete all as specified and directed.

S&F for 4mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions, laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug or hanged with existing truss members. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per insturctions, complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement morter (1:4) including pointing in white cement (1:2) using marble dust with admixiture of pigment to match with shade of granite, complete all as specified and directed.

M&L for factory made 100% solid WPC door frame 125mm x 65mm single rebated made from wood polymer composite (single extruded process) material comparising of vigin PVC polymer of K value 57-60 (suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 kg/cbm & manufactured by "RAJSHRI" an certified by ISO 9001-2015, having good screw holding capacity (screw withdrawel strength of min 990N), min compressive strength of 58N/Sqmm, modulus of elasticity 900 N/Sqmm and resistance to spread of flame of class A category with property of being termite /borer proof, water /moisture proof & fire retardant & fixed in position with SS dash fastener / hold fast of required dia and length, all as per specification, drawing and as directed. Note: Material test certificate and authentication should be compusory provided by the manufacturing company, complete all as specified and directed.

M&L for factory made of 30mm thick 100% solid WPC laminated skeleton door shutter comparising of vigin PVC resin of K value 57-60 (suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives made from extrusion process WPC foam sheet single extrauded (inner) with having minimum frame density not less than 650 kg/cbm & manufactured by "RAJSHRI" an certified by ISO 9001-2015, having good screw holding capacity (screw withdrawel strength of min 2000N) (Face) & 1100 N (Edge), min compressive strength of 50N/Sqmm, modulus of elasticity 850 N/Sqmm and resistance to spread of flame of class A category with property of being termite /borer proof, water /moisture proof & fire retardant. WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted on both faces of shutter and fixing stainless steel butt hings of required size with necessary full body threaded star headed counter sunk SS screwes, all as per specification, drawing and as directed . Note: Material test certificate and authentication should be compusory provided by the manufacturing company, complete all as specified and directed.

KANWAL KUMAR GUPTA (BID ID -3330337)

M/s Anil Engineers & Builders (BID ID -3329919)